Report - Drill Down and more than one evdre (problems)

Hi people!!!
I am trying to do a report with 3 evdre's. The report has some columns that are expanded using AfterRange.
The areas of expansion of the evdre's are one under the other.
The 3 evdre's works fine until I use the drill down.
After I do the drill down, just the area of my first evdre looks fine.
For my last two last evdre's, my AfterRange stops working and no drills happens.
Somebody already faced this same problem and can assist me?
Thanks a lot!!

Hi Sandro,
thanks a lot for your answer.
I understand that SLD works like a DNS - but why do I have an ExchangeProfile in the SLD?
I checked SAPSLDAPI - OK.
SLDCHECK is OK too! ... but in IB - Repository I get an error while importing SWCV: no connection to SLD.
I think I have to check the connection between IB-Repository and SLD ... bad think
Regards
Wolfgang

Similar Messages

How to export or delivery report for Excel for more than one sheet in OBIEE

Hi Experts,
How to export or delivery report for Excel for more than one sheet in OBIEE 11g? (Every time, I can only see one sheet.)
Is it possibl to implement this requirement?
Thanks.

there are 2 oprions,
One is have your tow report in a single compound layout of analysis and keep the report in dashboard and give report links.
it will cath both your report.
Suppose your analysis are different.
Then you have the option of printing it to a PDF. on ritght top of Dashboard, Print - > Printable PDF.
you ca export to PDF no to excel.
mark if helps,
fiaz

I entered calculates hands and more than one account and used a credit card please raise security measure for Visa card and thank you

I entered calculates hands and more than one account and used a credit card please raise security measure for Visa card and thank you

Hi Eva B.,
Please refer to the help document below:
Adobe Store | Online order and payment FAQ
Regards,
Sheena

Reports 9i Graphs with more than one query..

Hello,
I am converting my 6i reports to 9i reports. On my graph reports with more than one query, when I invoke the graph wizard it changes the value of the src to the wrong query automatically. When I run my report, I am getting the error REP-0069 Internal Error rwlib-1: REP-6219 Column (Column Name) not in given cursor hierarchy. Although it's a pretty easy fix to go into the graph settings in the property palette and change it back, it is extremely frustrating. Has anyone else ran into this problem and did you find a permanent fix?
Thanks,
Laura

Hi Laura
One workround would be to create a new query in the Data Model that includes desired fields, and then source
chart to the new group.
FYi, bug2527100 was filed on this issue and is already fixed. The fix would be available in 9i Reports 9.0.2.2 patch. Reports 9.0.2.2 patch is scheduled to be released on Mar 05 2003 (tentative date).
Thanks
The Oracle Reports Team

Populating more than one table and more than one field

I need some suggestions and this forum has always been a great source of good advice.
I have a web form at the following location: http://www.webdevpractice.com/genoptix/CE/register.php
Here's what the web form needs to do:
Send a confirmation email listing seminars the visitor checked on the form.
Create a similar message on a confirmation page.
Populate 2 two tables.
Items 1 and 2 are working fine.
The advice I need is on how to populate two tables in the database.
There are three tables:
ACCOUNTS
account_id
first_name
last_name
medtech_id
job_title
npi
company
city
state
email
phone
contact
ATTENDANCE
attendance_id
account_id
seminar_id
SEMINARS
seminar_id
seminar
speaker_first_name
speaker_last_name
date
The web form contains data that need to go into the ACCOUNTS table and the ATTENDANCE table. The challenge is getting the account_id and seminar_id into the ATTENDANCE table. If all the information was inserted properly, I could write a query that revealed who was taking what seminar.
Inserting data into the ACCOUNTS table is not a problem. I will create another form to insert information into the SEMINARS so that should not be a problem. But inserting the account_id and the seminar_id is what I am wondering about. Also, can more than one record be inserted in a table? If an user checks more that one seminar, each seminar (seminar_id) would need to be inserted in the ATTENDANCE table as separate records along with the account_id. I'm thinking I may have to do this manually. Also, the values for each seminar are their dates and titles. I used these as values to send the confirmations.
I'm just looking for advice at this point. Is this doable?

Bregent,
The table I am wondering about is the ATTENDANCE table. There are two fields in addition to the primary key: account_id and seminar_id. The field I am concern with is the seminar_id which comes from a group of checkboxs on the form. So, one form could create several records. For example, presently there are three seminars that are offered. If the visitor selects all three seminars, that would create three records in the SEMINARS table. So, it might look like this:
attendance_id     account_id     seminar_id
     1                    1                    1
     2                    1                    2
     3                    1                    3
My PHP skills are basic. I've done other forms and use PHP in other ways. But I have never had to populate several rows in one table with an array of checkboxes nor have I be able to find an example of this.
So the advice I am seeking (and perhaps this is premature) is this:
Can one field from a table populate more than one record?
Should I set up checkboxs as a group or individually with a different name?
I am also considering setting up my tables differently so there is a table from each seminar--that may solve my problem.

Once I updated to Firefox 11, I can't open pdf's. This is on more than computer, snow leopard and lion and more than one website.

I've updated to Firefox 11 and now I can't open online pdf's. This has happened on more than 1 computer, using both OS 10.6.8 and OS 7.0 and on more than one website. I tried unchecking "block pop-ups" under preferences but that didn't help.
When I use Safari to open the same pdf's, they open up fine. Everything worked fine with my Firefox until I did the upgrade.
I'd prefer to continue to use Firefox, but I can't figure out the root of the problem.
Has anyone else had this happen as well?

I found a recommendation in another thread:
''If using a Mac, go to the Firefox Plugins and disable the Adobe Acrobat NPAPI Plug-in, Version 10.1.3. This is a recent plugin update, and as soon as it was installed I noticed that PDFs wouldn't download.''
''Location: [Menu] Tools/Add-Ons/Plugins ''
https://support.mozilla.org/en-US/questions/775819

IChat AV with NAT and more than one Mac

I am a bit confused about firewall settings for iChat AV. I have a netgear FVS328 router. Obviously to have iChat working, I first open the firewall on my mac (Tiger) for the appropriate ports. Then I defined a service on the router and a rule to open those ports. It works... however, I have an issue.
In the router firewall setup I had to give an LAN IP Address to which packets for those specific iChat ports would be forwarded. Now, I understand this when a connexion is ignited from the Internet and (for example) you would want all HTTP trafic on port 80 to go to your web server. But here I have more than one mac behind my firewall. Moreover, they get there address by DHCP. I can't change the firewall setting each time I want to chat from a different computer!
I tried to have a look at port triggering, but it doens't seem to exist on the netgear. But even though, I would have to specify an IP address on my LAN.
Why is this needed since basically both iChat parties are already connected to .Mac so the connexion is made!
I am also wondering how they manage that kind of problem in Internet cafes where they certainly do not have a fixed Internet IP address for each PC or Mac available!

It is not possible to port forward the same port number to more than one computer on any router that does NAT. It is impossible for the router to know which of the computers to send it to and sending it to both would confuse the software.
Think of it another way all post for a particular house is delivered by a postman. Once posted in the mailbox someone picks it up and ensures it reaches the correct person by the name written on the post. Now if you have 2 John Smiths in the same house nobody will know which one it is for. The same applies to the port numbers on the router. Some applications allow you to select a unique range of ports for each computer so you can organize a unique port for each computer but iChat doesn't.

Email reports as attachments to more than one address

Hi,
I want to know how do you send emails from SAP to more than one address with certain reports as attachments ?
Thanks & Regards,
Andrew

http://www.sap-img.com/abap/sending-email-with-attachment.htm
http://www.thespot4sap.com/articles/SAP_Mail_UNIX_Example_ABAP.asp
http://www.saptechies.com/sending-mail-with-attachment-report-in-background/
Regards,
Ravi

SSL certificates and more than one hostname / interface

Hi,
I'm trying to configure the directory proxy server of DSEE7 to listen at 636 (SSL) at 2 different interfaces. As both of them got different hostnames, I get a certificate error for one of them because the name does not match the one of the certificate. Is there a way to configure the proxy server with different certs for different interfaces / hostnames?
thank you,
solst_ice

Hi,
Did you tried SAN certificates (also known as Unified Communication Certificates by Public CA like DigiCert, Entrust etc..) ?
SAN stands for Subject Alternate Names - this allows more than one hostname to be binded to a single certificate for such multihosting setup. I think you should try using a self-signed SAN certificate before purchasing a SAN certificate from External Public CA (if you rely on External Public CA). If you have Private CA then I think there should be much cost impact for you.
HTH,
Randip Malakar

Drill down using more than three items

Is it possible to supply more than three parameters to the column link?
I am making a drill down from summary report to the detail report, and I need to pass five parameters to the detail report. The list of items under
Application Builder > Application X > Page Y > Report Attributes > Column Attributes > Link
is limited to three items. Is there a way around this limitation?
Thanks,
Tim

You need to change you link type from Page In This Application to URL. You'll then need to encode each parameter name and it's value into the last two elements of the f?p format. You can use a two or three parameter URL as an example and just modify from there. 
 
For example (from one of my applications): 
 
f?p=101:13:::NO::P13_NAME,P13_SEQ_ID:Lee%2C396 
 
The relevant part is the last colon (or the fields on either side of it more specifically). The first set of fields P13_NAME,P13_SEQ_ID are my page item names on the destination page (where we're going) and the last two Lee%2C396 are their values from the source page (where we're coming from). The %2C is an encoded comma. In order to get this in your output, you want to set your URL to something like: 
 
f?p=101:13:::NO::P13_ITEM1,P13_ITEM2:&P12_ITEM1.,&P12_ITEM2. 
 
I'm doing this from memory since I can't find a good example for you, but I think I'm pretty close in the syntax. 
 
Hope it helps.

Web Intelligate Summer Report drill down and drill up problem

I use summary table and @aggreage_aware function to design a universy. I want WI report shows highest level summary table data first, then drill down to next high summary table data. But when I drill up back, it still shows be next high summary table data. I don't use the report to do any calculations. I just want it shows different level data.
Detail:
I have three tables:
1. Month_Data table: - Base fact data table.
Year
Quarter
Month
Department ID
Supplier ID
Score          -- Measure type
2. Quarter_Data table: - High level summary table.
Year
Quarter
Department ID
Supplier ID
Score          -- Measure type
3. Year_Data table: - Highest level summary table.
Year
Department ID
Supplier ID
Score          -- Measure type
I like to create a web intelligence report that shows data from year_data table:
Year          Score
2008          105
2007          99
2006          90
If I drill one level down, It will show data from quarter_data table:
Year (example 2007)
Quarter1     Score
Quarter2     Score
Quarter3     Score
Quarter4     Score
If two level drill down, it will show data from month_data table:
Quarter1
     Month1          Score
     Month2          Score
     u2026
     Month12                     Score.
No calculation needed on the report.
I will use follow steps to create a universe:
1. Three tables will be three classes. The classes order is:
     Year_Data class; Quarter_Data class; Month_Data class.
2. When I create universe, I join:
Year_Data class to   Quarter_data class:
Year to year                1 to n
Department ID to Department ID          1 to n
Supplier ID to Supplier ID          1 to n
Quarter_Data class to Month_Data class:
Year to Year               1 to n
Quarter to quarter               1 to n
Department ID to Department ID          1 to n
Supplier ID to Supplier ID          1 to n
3. Create a filter class with object Department ID and supplier ID.
4. I create two aggregate aware classes:
Agg_dimension class:
     Year:    aggregate_aware(year_data.year, quarter_data.year, month_data.year)
     quarter: aggregate_aware(quarter_data.quarter, month_data.quarter)
     Month:     aggregate_aware(month_data.month);
Agg_Measure class:
     Score: aggregate_aware(year_data.score, quarter_data.score, month_data.score)
5. I may re-define year, quarter, month and score as aggregate_aware function for objects in all classes:
     Year:     aggregate_aware(year_data.year, quarter_data.year, month_data.year)
     quarter: aggregate_aware(quarter_data.quarter, month_data.quarter)
     Month:     aggregate_aware(month_data.month);
     Score:   aggregate_aware(year_data.score, quarter_data.score, month_data.score)
6. create user hierarchies:
agg_dimension.Year
agg_dimension.quarter
agg_dimension.month
7. Figure out Aggregate Navigation -- it is easy.
Then create a report. I put follow objects on report:
Agg_dimension.year          agg_measure.score
When I run report, it shows right data:
Year_data.year          Year_data.score
On the report. I drill down on year, it shows right data.
Quarter_data.Year:
Quarter_data.quarter1                quarter_data.score
Quarter_data.quarter2                quarter_data.score
Quarter_data.quarter3                quarter_data.score
Quarter_data.quarter4                quarter_data.score
But when drill it up back on quarter, it shows:
Quarter_data.year     quarter_data.score1
Quarter_data.year     quarter_data.score2
Quarter_data.year     quarter_data.score3
Quarter_data.year     quarter_data.score4
Not
Agg_data.year          agg_data.score.
It has drill up back problem on my report.
Please help.
Thanks
Frank Han

and keyfigures are coming frm 2lis_03_bf..But when i drill down on purchase organization, purchase grou , vwndor account group and planning group then # is coming instead of value....i dont the reason for this..
Did you chk if you have vendor, purchase org, all this coming from 2LIS_03_BF??
Can you chk in listcube transaction what is the output by putting the same restrictions as in the query?
Edited by: mansi dandavate on Jul 10, 2009 11:37 AM

Use Images in Reports in dependency of more than one criteria

Hello,
I would like to use Images in Reports as described in Tips & Tricks (green and red point image), but I don't know how to do this if I have more than on criteria. The point is, how to link it to the report. 
I wrote this pl/sql-code, he would check the criterias:
 
BEGIN 
DECLARE 
CURSOR ss_alle IS 
--Abfrage aller Datensätze 
SELECT ID, sbb_site_id, code_swisscom, ok_sent_swisscom, ok_back_swisscom FROM acqueasy.ssvertrag; 
BEGIN 
--Eintrag für Eintrag abarbeiten 
 FOR ss_id IN ss_alle LOOP 
 --Auf Code prüfen 
 IF (ss_id.code_swisscom IS NOT NULL) THEN 
 --Zustimmung an Swissom gesendet 
 IF (ss_id.ok_sent_swisscom IS NULL) THEN 
 --show red point 
 ELSE 
 --show green point 
 END IF; 
 END IF; 
 END LOOP; 
END; 
END; 
 
Is it possible to set some variables from the current line of the report, where do I have to put this code and how do I have to replace the comment --show ..point (e.g. "<img "down.gif">")
 
Thanks for your help

The solution is much easier: http://www.oracle.com/global/de/community/index_v9.html

Adf faces, data control and more than one session context ?

I already put the question in the forum but nobody answered may be my question may not be so clear so i would put it again with other words.
Each xml page definition are instantiated in a binding container for a http session, you are able to get the data with bindings or data that represent the current binding container (bindings) or a given container corresponding to an another page that the current (data).
It is perfect when you don't allow multiple instances of the same page in the same application session. Browser are now offering tab management that allow user to navigate through multiple applications just by changing the current tab. It's very useful. I imagine that user's will be using it also in my application and will use it to compare or more simply just watch about two different entities of the same type (the same xml page definition, the same object instantiated in the binding container).
Because the binding container is associated with the http session all tabs will share the same one, isn't ? So i understand the problem and that it is forbidden to have many identical page for a single instance in the binding container because of synchronization issues.
Is all that i said true ?
Is it a way to solve this type of problem ?
Will this problem be addressed by adf faces and data controls ?
Hope somebody will answer !
Message was edited by:
micwic

I already put the question in the forum but nobody answered may be my question may not be so clear so i would put it again with other words.
Each xml page definition are instantiated in a binding container for a http session, you are able to get the data with bindings or data that represent the current binding container (bindings) or a given container corresponding to an another page that the current (data).
It is perfect when you don't allow multiple instances of the same page in the same application session. Browser are now offering tab management that allow user to navigate through multiple applications just by changing the current tab. It's very useful. I imagine that user's will be using it also in my application and will use it to compare or more simply just watch about two different entities of the same type (the same xml page definition, the same object instantiated in the binding container).
Because the binding container is associated with the http session all tabs will share the same one, isn't ? So i understand the problem and that it is forbidden to have many identical page for a single instance in the binding container because of synchronization issues.
Is all that i said true ?
Is it a way to solve this type of problem ?
Will this problem be addressed by adf faces and data controls ?
Hope somebody will answer !
Message was edited by:
micwic

Reporting on recipients in more than one Campaign

I would like to add multiple campaigns per contact and be able to report on it. After testing the system I found you can only report on one campaign(source campaign) per contact. Please let me know if there is a way around this to report on contacts in multiple campaigns. Thank you.

Anyone?

HT202213 Home sharing. Multiple ipods and more than one user..... Do they all need seperate accounts?

I have set my kids ipods up on home sharing. Now when their games on each personal ipod, they are the same user. Is there any way of changing this? Or do I have to make each kid a seperate account and buy all of these games twice?

It doesn't look like anybody had any answers for me, but its no big deal as I solved it myself. The problem was dependent on the WebLogic's implementation of their security context and hence there probably isn't a generic solution. It turns out that WebLogic can associate a user object with each thread. If a thread does not have a user object associated with it, it uses the default user which is assigned the first time a user signs in. The problem was that the application thread was used to initially sign in, but the awt event thread was used to access the ejb. Since the awt thread had no context it would use the default.
If anyone wants to know more about the exact solution you can email me at r k e n w o r t h y@h o t m a i l . c o m (pardon the spaces - hopefully they will avoid extra spam going to my account).

Report - Drill Down and more than one evdre (problems)

Similar Messages

Maybe you are looking for