Report dropped in a directory in BIP

Hi,
In BIP can we drop a report in a directory other than ftp or email? Thanks.

In BIP reports are normally saved to a folder, typically under "[...]/OracleBI/xmlp/XMLP/[...]".

Similar Messages

How to generate output file of a certain report in a specified directory

Hello everyone,
I wanna know how to generate the output file of a certain report in a specified directory.
Now, the output file directory = /produits/OA/OAS/production/prodcomn/admin/out/PROD_us15k1bp/
I wanna to generate the output file of a report in this directory
/produits/OA/OAS/production/prodcomn/admin/out/PROD_us15k1bp/FACTCLIENT
Cause the output of this report is very large, so I don't wanna to put it in the output drectory standard which reduce the performance.
Could you help me?
Thanks a lot,
Kinkichin

Hi,
I wanna know how to generate the output file of a certain report in a specified directory.See (Note: 158088.1 - Is Possible to Redirect the Concurrent Processes Output to a Specific Directory for a Specific Responsibility?).
Cause the output of this report is very large, so I don't wanna to put it in the output drectory standard which reduce the performance.There should be no performance issues you place the output file in the same directory where other concurrent request output files are located.
Regards,
Hussein

SCCM web Report drop down

hi ALL
I have sccm 2012 in my setup , i have given web access for certain reports to helpdesk team
when they are looking for report drop down shows all collections created .i need to limit only collection required view for them in Drop down box
ankith

no CM12 Sp1
is there any thing new for R2 on reporting parts
Yes, I know this is an old post, I'm trying to clean them up. <o:p></o:p>
Yes, in CM12R2, RBA is now implemented in reporting (default report; for custom report they
will need to be re-write to leverage RBA.)<o:p></o:p>
This blog post will show you more details. <o:p></o:p>
http://be.enhansoft.com/post/2013/10/21/Role-Based-Administration-(RBA)-Reporting-Feature-in-SCCM-2012-R2.aspx<o:p></o:p>
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Problem when sending report to mail ID's in BIP

Dear All,
We are using BIP 10.1.3.3.1.
I generated some reports .
I configured SMTP server and i can aable to send my reports to users ID's
also.
But i have to send my reports to 10 users(one ID is having 30 characters
length).
while i am giving the ID's in
TO: (it is taking up to 80 characters ie 2 ID's and 20 chars)
For that what i have to do?
My plans are
1)Grouping the 10 ID's
But there no permition for grouping in my company.
Then i left it.
2)Tring to increase the length of that 80 chars to >300.
for that i checked the tables which are created while installing the
schedular schema.
i found the table names as follows
Qrtz_blob_trigger
Qrtz_calender
Qrtz_cron_trigger
Qrtz_fired_trigger
Qrtz_job_trigger
Qrtz_scheduler_state
Qrtz_simple_trigger
Qrtz_locks
Qrtz_paused_trigger_grps
Qrtz_trigger
Qrtz_ trigger_listener
MY doubt is
1)that length inf is in which table
2)which field name
3)if i change that length is there any impact on other tables
It is veryyyyy Argent.
Plz any body help me .
Regards
Subbu..

Hi,
If you are using 6i,
Run the report in "batch" mode. This will not bring up the send mail dialog.
For multiple email id's, you can give destype=mail desname=[email protected],[email protected],..etc. or use distribution.
In 9i, the standard SMPT protocol is used. Hence you will not get this problem.
You can see example "Bursting and Distributing"
http://otn.oracle.com/docs/products/reports/htdocs/doc_library/getstart/examples/Distribution/index.html
Thanks,
Siva B

Report to ftp to directory

hi guys,
existing i have a report, which with the output, of sending the data into text file through email to the user when execute.
but now, i am requested, to have a new code, to allow to send the text file, ftp to a server directory location, for their upload purpose. can i know how am i going to code for this? thanks

Hi Ben,
Check below links,
ABAP Query
ABAP Query
I hope it will help to resolve your query
Best regards,
Brijesh

Mail Reports that the home directory is full

My iBook has Norton Firewall on it and when I connected it to the high speed internet in a hotel room, the Firewall went crazy logging thousands of hits in a few minutes. Eventually the iBook stopped and a multi-lingual message requested that I reboot the iBook.
In the meantime, I had started the Mail program.
Once I managed to get the iBook working again, (it took some time and I had to restart the machine with the shift key down), I ran the usual disk clean-up utilities, Disk Utility, DiskWarrior and Drive Genius. The machine then rebooted and everything except mail worked correctly. Mail will not start but instead reports the following:
Mail cannot update your mailboxes
because your home directory is full.
You must free up space in your home folder before
using Mail. Delete unneeded documents or move
documents to another volume.
There is lots of free disk space on this machine and I can work with files with other programs so I think a mail file must be corrupted. I would appreciate hearing from anyone who knows how to fix this problem.
iBook G3, G4 Minitower Mac OS X (10.4.6)

My question has been answered by a posting made to another member during the time I was typing in my problem.
Thanks

To display the list of File Name in a report region from a Directory

Hello All,
Can any one guide me in displaying the list of file name from a file system directory in a report region with link?
On click of the link it should display the open/save dialog box.
I will appreciate the early solution. (It is bit urgent)
Thanks,
Shyam

A quick, "dirty solution would be to have a cron job (I am assuming you are on a UNIX-based system) that populates a file periodically with the names of files in a directory/directories. Then have an external table that points to that file. You can then create an Apex report that lists the contents of the external table.
1) crontab job:
ls -1 /source_dir/* > /destination_dir/file.list
2) create external table:
CREATE DIRECTORY filedir AS ' destination_dir ';
GRANT READ ON DIRECTORY xfer_files TO public;
CREATE TABLE file_list_ext (file_names VARHCAR2(100))
ORGANIZATION EXTERNAL
TYPE oracle_loader
DEFAULT DIRECTORY files_dir
ACCESS PARAMETERS
records delimited by newline
fields terminated by ','
missing field values are null
(file_name)
LOCATION ('file.list')
REJECT LIMIT UNLIMITED;
3) create APEX report on table: file_list_ext
Hope this helps.

Strange behavior in Financial Reports (drop down feature)

Hello Gurus,
I have currently performed migration of Financial Reports from 11.1.1.3 environment to 11.1.2.2 environment with the help of a staging environment.
We migrated the reports over to 11.1.2.2 using LCM from the Staging 11.1.2.2 environment.
We are observing some strange behavior with the Financial Reports that have drop down functionality in our new environment.
When we open a report in our current environment (113) and select a particular member (India) from the Page dimension(Page has almost 30 members in it) it returns appropriate data, however when the same report is opened in new environment (122) and when we select the same member(India), it does not return appropriate data(Page has almost 30 members in it).
However if we design a sample report with the same member in the page (Page has only 1 member (India)) and then open the report it shows correct data.
So the issue occurs only when we have more than 1 members in page and it works as expected when we have only 1 member in page.
Any help would be highly appreciated.
Thanks,
hyperionEPM

Hello Neeraj,
We are trying to understand the potential reason as to why is it causing this. Is there anything similar caught in .303 patch?? I will have a look at the .303 patch readme.
Thanks,
hyperionEPM

Crystal Reports 2008 - Report off of Active Directory

Hello,
I have found a few articles on how to do this, but they don't seem to follow my wizard.
Can someone provide a tutorial on how to create a Crystal Reports 2008 report against active directory?
I have been able to do the following so far:
1) Create new OLE DB (ADO) connection
2) From Provider, choose OLE DB Provider for Microsoft Directory Services.
3) The fields I have are Data Source, User ID, and Password.
- I do not have a field for "LOCATION" that is referenced in documentation I have found on here.
4) I enter my server.domain.com:389 for active directory, a valid username and password.
5) It seems to create the connection, and wants me to ADD COMMAND. I haven't been able to find a command that actually works online. Does anyone have one? I.e.: Employee and Supervisor names.
Thank you,
Lin

backing up a step or two, make sure that the username you are using has a domain alias infront of it, something like "mydomain\myusername" should be the correct format. even if you don't get an error when you create the connection it may be incorrect. when entering in a command is the only time it actually tries to authenticate against the AD server. If you make a mistake when entering in the original connection (anytime before the add command part) remember that you will need to exit out of Crystal Reports and come back in. the connection can not be remade or edited once entered.
Now, as for what to put into the query, you will probably need to talk with your windows AD administrators. the one I used for my organization was something like this (replace the stuff between the <> marks with your data):
SELECT samaccountname, sn, givenname, mail FROM 'LDAP://OU=<yourOU>,DC=<yourdomain1>,DC=<yourdomain2>'
remember you can not use * to get data, it seems to take what ever properties you directly name. if you need names of properties or items to call, I'd recommend a quick google search on LDAP SQL queries.
I hope this helps

Display images in a report taht are on directory

I have a lot of .jpg image on a specific directory.
In the query table of the data that i want display i have a colum name foto_1 that contain the name of the image ('example f_001_1.jpg');
I ask : it is possibile to display this images for each record on a report ??
And where i must put this image ??
There is ana alias to point at my images directory ??
Thank's a lot !

Mike, re ALIAS's (I forgot to mention):
A) #WORKSPACE_IMAGES#my_image.jpg points to the images uploaded in the workspace (under Shared Components)-
B) #IMAGE_PREFIX#my_image.jpg points to the /i/ directoy on the Apache under Marvel --> images --> (normally not accessible to workspace users/developers!);
when you upload anything with "File Browse" the data will be stored in the HTMLDB repository under the user FLOWS_010600 in the table wwv_flow_files with columns id, name - for the image details look at previous entry.
Bernhard

Insert report....Directory entry dir

Hi All,
I am using the statement INSERT REPORT ..... with the extension DIRECTORY ENTRY dir. This extension specifies the program attributes for the created or overwritten program according to the content of dir. But here the condition is that the dir should have the structure of TRDIR. According to my requirement I need the report title also...which will be available in TRDIRT. Then how can I retrieve the report tilte from the INSERT REPORT statement. Is thr any other way to do this? Please respond as soon as possible.
Thanks in advance,
Swapna.

Hi NagaSwapna,
You can find the report titile in the table TRDIRT with the filed name TEXT
give the program name in field NAME.
Thanks

Web Reporting, drop down box.

Hi Friends,
Previously we have a variable for 'Selection Time Category'.
They no more want to use a varible instead they want to put as navigational, I think filters in web. Can I use a drop down box for this.
What I have done is I placed infoobject in Free char area in Query and Saved it.
Now I want to place use a drp down box in Web adjacent to other dropdown boxws. Please guid me. I am new to Web reporting.
Sudhakar

hi,
try
- drag dropdown box web item to your web template
- do setting for properties for the dropdown box in 'specific' section
characteristic/structure : your characteristic to filter
read mode : posted values
take a look 'affected data providers', make sure data provider you want controlled by the dropdown box marked.

Crystal Reports and Windows Active Directory

Hi,
I am trying to authenticate using the Windows Active Directory. I have created a test group in the Active directory and added myself as a member to that group. On the Crystal reports server side, I have enabled the Windows Active Directory. I can see the group that I created on the Active Directory. But I do not see any users. I have a Java infoview and I changed the web.xml file. I changed the authentication parameter to secWinAD. But does anyone know how to restart the web application server? I restarted the service Intelligent Agent. But when I login using my user id and password it still gives me the same error:
Account Information Not Recognized: Enterprise authentication could not log you on. Please make sure your logon information is correct. (FWB 00008)
Any help will be appreciated.
Thanks.

Infoview doesn't even need to be restarted.
You said "I have a Java infoview and I changed the web.xml file" in your original post
If you have .net IIS then it would be a web.config file that needs to be changed. IIS will pick up the changes as soon as you save the file and open an infoview logon page. you may also opt to set authentication.visible to true so users will have the ability to select AD when logging in.
Regards,
Tim

Updated reports saved to shared directory not updating for users.

We are using Crystal Reports XI to generate reports based upon our application (EZ-CAP). When we update a report, and save it to our shared report folder on the server, the users "see" only the original report when the open it in Crystal Reports. This behaviour persists even if they reboot their systems. We see this by looking at the timestamp in the Open dialog, which is not the current date/time. The data is not refreshed, either.
However, if the users close Crystal Reports and manually "find" the report by browsing the reports folder, when they next open Crystal Reports, the "new" file is available.
We suspect the reports are being cached inside Crystal Reports, but don't know how or why. We are not using the Repository at this time.
Any insight will be appreciated.

Hi Vickie,
When your user browse for the new file, are they following the same netowkr path as the Open FIles in Crystal? Is it possible the folder the reports are saved to may be mapped to a duplicate folder somewhere else on the network?
That's a dumb response but I've run across that situation before.
The reports are saved with .rpt extensions and no spaces? Since Crystal's Common Dialog is looking for files with that extension.
In the File Open, if you change the Files of Type to All Files, do your users see the new reports?
Good luck,
Brian
Edited by: Brian Dong on Feb 2, 2009 11:57 PM

Report - Drop down feature

Hi All,
My Requirement is in a Query
The main input will be the Ship to Customer Number. Since, the users are not familiar with the customer numbers (they only know the Customer names), in order to find the correct Customer number(s), the user can use the drop down feature that is available for the SHIP TO Customer on the selection Screen. A list of customers will be displayed. The user can then enter the Customer Name (In full or partially) and then press the find button to select the required customer(s).
Can any one please explain on drop down feature how we can give the drop down feature and on the slection area ..
and please explain on below
A list of customers will be displayed. The user can then enter the Customer Name (In full or partially) and then press the find button to select the required customer(s).
Thanks in advance
karuna

Hi Karuna,
I am not sure about the drop down feature but you can go for a selection option variable.
This will have what you need, an option to search by name(Text or Key) and a list of all the values from which users can select.
both the search and List option are available in a single screen which is a popup.
You can use this feature except that the dropdown feature which you are talking about will not be available in this.
See Selection Option in the following link.
http://help.sap.com/saphelp_nw70/helpdata/en/55/589b3c494d8e15e10000000a114084/frameset.htm
Regards,
Rk.

Report dropped in a directory in BIP

Similar Messages

Maybe you are looking for