Report Editor & Wizard - NT Error
In report builder - when running the Report Wizard from within Report Editor, I receive the following error:
REPORT BUILDER FOR WINDOWS 95/NT:RWBLD60.EXE - Application Error
The exception Integer division by zero
(0x0000094) occurred in the application at location 0x008ad29a
I am then kicked out of report builder altogether.
This happens on 50% of my machines, some sporadically, some all the time.
anyone???????????
hello,
you might also check what level of NT servicepack and Oracle Reports Patch you are on. you should go to the latest of each .
regards,
the oracle reports team --pw
Similar Messages
-
Crystal Reports for Eclipse throwing error - wizard could not be open
Hi,
Today i downloaded Crystal Reports for Eclipse version 3.4.1. i copied the same to the program files folder & while i double click on eclipse.exe. I am able to get in to the eclipse, but while i am trying to create a blank report by right click project -> New -> Other ->Crystal Report -> Blank Report i am getting error " Problem Opening the wizard" & additional details on error as " the selectd wizard could not be started Plug-incom.businessobjects.designer.blankreportwizard was undable to load class com.businessobjects.crystalreports.designer.blankreportwizard.blankreportwizard.com/businessobjects/crystalreprots/designer/blankreportwizard/blankreportwizard(unsupported major.minor version 49.0)"
In my machine i have J2SE Development Kit 5.0 Update 11 & J2SE Runtime Environment 5.0 Update 11 . Can anyone help me to resolve the issue.
Thanks,
SibyHi,
Please make sure you have Tomcat 5.5 installed on your machine.
Also JAVA_HOME and Tomcat's CATALINA path are set accordingly in Environment Variables.
After setting these restart machine and Eclipse.
The latest version for crystal report for eclipse isCrystal Report For Eclipse v2.0 SP1
Thanks,
Neeraj
Edited by: Neeraj SP on May 19, 2009 6:08 PM -
Reg:- Runtime Exception on preview of Portal Activity Report Editor iView
Hi All,
I am trying to preview the iView, "Portal Activity Report Editor" located under Portal Content -> Content Provided by SAP -> Admin Interfaces -> Admin iView Templates -> Portal Editors under Content Administration role.
But, when I previee the iView, I get a RunTime Exception as follows:
#1.5 #0014C263546200A5000008B900000CEC000450DE5CE9A528#1214815878685#com.sap.portal.applicationFramework.tools.wizardframework#sap.com/irj#com.sap.portal.applicationFramework.tools.wizardframework#<User_ID>#152806##n/a##b3602110468111dd9e8e0014c2635462#SAPEngine_Application_Thread[impl:3]_56##0#0#Fatal#1#/System/Server#Java###wizard session No: 429: could not instantiate pane instance of type com.sapportals.admin.wizardframework.core.ClassNameAndConstructorArgs@1663bd## #1.5 #0014C263546200A5000008BA00000CEC000450DE5CE9A6F1#1214815878685#System.err#sap.com/irj#System.err#<User_ID>#152806##n/a##b3602110468111dd9e8e0014c2635462#SAPEngine_Application_Thread[impl:3]_56##0#0#Error##Plain###Jun 30, 2008 4:51:18 AM com.sap.portal.portal [SAPEngine_Application_Thread[impl:3]_56] Error: Exception ID:04:51_30/06/08_15351_4495550
#1.5 #0014C263546200A5000008BC00000CEC000450DE5CE9B605#1214815878685#com.sap.portal.portal#sap.com/irj#com.sap.portal.portal#<User_ID>#152806##n/a##b3602110468111dd9e8e0014c2635462#SAPEngine_Application_Thread[impl:3]_56##0#0#Error#1#/System/Server#Java###Exception ID:04:51_30/06/08_15351_4495550
[EXCEPTION]
#1#com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.activityReportEditor
Component class : com.sap.portal.webreport.editor.ActivityReportEditor
User : <User_ID>
at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:973)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:343)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:646)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:547)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: java.lang.RuntimeException: an Exception occured when instantating class com.sap.portal.admin.editor.pane.EditorPaneWrapper
at com.sapportals.admin.wizardframework.core.TrivialPaneFactory.getComponent(TrivialPaneFactory.java:54)
at com.sapportals.admin.wizardframework.core.WizardInstance.doWizard(WizardInstance.java:225)
at com.sap.portal.admin.editor.Editor.doWizard(Editor.java:605)
at com.sap.portal.admin.editor.Editor.run(Editor.java:150)
at com.sap.portal.admin.editor.AbstractEditorComponent.doContent(AbstractEditorComponent.java:59)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
... 29 more
This happens for all Editor iViews.
Kindly let me know what could be the problem.
Thanks and Regards,
PavithraHi Sandeep,
Thank you for your inputs.
I had raised an OSS Message with SAP some days ago on this issue. SAP has replied back saying that only users with Content Administration role can have access to configure portal acyivity report. All other users can only view the results.
Regards,
Pavithra -
Hi,
when I use report 9i wizard appears the sequent message:
REP-0110: Unable to open file 'rwTemplates.xml'.
But this file is in %ORACLE_HOME%\reports\templates and this directory is in REPORTS_PATH.hi Philipp,
-- did you check if the file has any content ?
<?xml version="1.0" ?>
<!DOCTYPE webTemplates SYSTEM "rwTemplates.dtd">
<webTemplates>
<classSets>
<classSet id="portletclassSet">
<class name="TableStyle" value="PortletTable"/>
<class name="ColumnHeader" value="PortletHeading1"/>
<class name="RowHeader" value="PortletHeading1"/>
<class name="CellText" value="PortletText1"/>
<class name="CellNumber" value="PortletText1"/>
<class name="CellDate" value="PortletText1"/>
<class name="TotalText" value="PortletText1"/>
<class name="TotalNumber" value="PortletText1"/>
<class name="GroupAboveHeader" value="PortletHeading1"/>
<class name="GroupAboveSubHeader" value="PortletHeading2"/>
<class name="GroupAboveSubSubHeader" value="PortletHeading3"/>
</classSet>
<classSet id="caboclassSet">
<class name="TableStyle" value="OraTable"/>
<class name="ColumnHeader" value="OraColumnHeader"/>
<class name="RowHeader" value="OraRowHeader"/>
<class name="CellText" value="OraCellText"/>
<class name="CellNumber" value="OraCellNumber"/>
<class name="CellDate" value="OraCellText"/>
<class name="TotalText" value="OraTotalText"/>
<class name="TotalNumber" value="OraTotalNumber"/>
<class name="GroupAboveHeader" value="OraHeader"/>
<class name="GroupAboveSubHeader" value="OraHeaderSub"/>
<class name="GroupAboveSubSubHeader" value="OraHeaderSubSub"/>
</classSet>
<classSet id="RWSet">
<class name="TableStyle" value="OraTable"/>
<class name="ColumnHeader" value="OraColumnHeader"/>
<class name="RowHeader" value="OraRowHeader"/>
<class name="CellText" value="OraCellText"/>
<class name="CellNumber" value="OraCellNumber"/>
<class name="CellDate" value="OraCellText"/>
<class name="TotalText" value="OraTotalText"/>
<class name="TotalNumber" value="OraTotalNumber"/>
<class name="GroupAboveHeader" value="OraHeader"/>
<class name="GroupAboveSubHeader" value="OraHeaderSub"/>
<class name="GroupAboveSubSubHeader" value="OraHeaderSubSub"/>
</classSet>
</classSets>
<webTemplate id="rwbeige" cssFile="rwbeige.css" classSet="caboclassSet" htmlFile="rwbeige.html"/>
<webTemplate id="rwgray" cssFile="rwgray.css" classSet="caboclassSet" htmlFile="rwgray.html"/>
<webTemplate id="rwblue" cssFile="rwblue.css" classSet="caboclassSet" htmlFile="rwblue.html"/>
<webTemplate id="rwgreen" cssFile="rwgreen.css" classSet="RWSet" htmlFile="rwgreen.html"/>
<webTemplate id="rwpeach" cssFile="rwpeach.css" classSet="RWSet" htmlFile="rwpeach.html"/>
<webTemplate id="rwwine" cssFile="rwwine.css" classSet="RWSet" htmlFile="rwwine.html"/>
</webTemplates>
-- did your iDS installation give you any errors ? No
-- did you modify the file ? No
regards,
Rino -
Performance issue in Report (getting time out error)
Hi experts,
I am doing Performance for a Report (getting time out error)
Please see the code below and .
while looping internal table IVBAP after 25 minutes its showing time out error at this poit ->
SELECT MAX( ERDAT ) .
please send alternate code for this .
Advance thanks
from
Nagendra
Get Sales Order Details
CLEAR IVBAP.
REFRESH IVBAP.
SELECT VBELN POSNR MATNR NETWR KWMENG WERKS FROM VBAP
INTO CORRESPONDING FIELDS OF TABLE IVBAP
FOR ALL ENTRIES IN IVBAK
WHERE VBELN = IVBAK-VBELN
AND MATNR IN Z_MATNR
AND WERKS IN Z_WERKS
AND ABGRU = ' '.
Check for Obsolete Materials - Get Product Hierarhy/Mat'l Description
SORT IVBAP BY MATNR WERKS.
CLEAR: WK_MATNR, WK_WERKS, WK_PRDHA, WK_MAKTX,
WK_BLOCK, WK_MMSTA, WK_MSTAE.
LOOP AT IVBAP.
CLEAR WK_INVDATE. "I6677.sn
SELECT MAX( ERDAT ) FROM VBRP INTO WK_INVDATE WHERE
AUBEL EQ IVBAP-VBELN AND
AUPOS EQ IVBAP-POSNR.
IF SY-SUBRC = 0.
MOVE WK_INVDATE TO IVBAP-INVDT.
MODIFY IVBAP.
ENDIF. "I6677.e n
SELECT SINGLE * FROM MBEW WHERE "I6759.sn
MATNR EQ IVBAP-MATNR AND
BWKEY EQ IVBAP-WERKS AND
BWTAR EQ SPACE.
IF SY-SUBRC = 0.
MOVE MBEW-STPRS TO IVBAP-STPRS.
IVBAP-TOT = MBEW-STPRS * IVBAP-KWMENG.
MODIFY IVBAP.
ENDIF. "I6759.en
IF IVBAP-MATNR NE WK_MATNR OR IVBAP-WERKS NE WK_WERKS.
CLEAR: WK_BLOCK, WK_MMSTA, WK_MSTAE, WK_PRDHA, WK_MAKTX.
MOVE IVBAP-MATNR TO WK_MATNR.
MOVE IVBAP-WERKS TO WK_WERKS.
SELECT SINGLE MMSTA FROM MARC INTO MARC-MMSTA
WHERE MATNR = WK_MATNR
AND WERKS = WK_WERKS.
IF NOT MARC-MMSTA IS INITIAL.
MOVE '*' TO WK_MMSTA.
ENDIF.
SELECT SINGLE LVORM PRDHA MSTAE MSTAV FROM MARA
INTO (MARA-LVORM, MARA-PRDHA, MARA-MSTAE, MARA-MSTAV)
WHERE MATNR = WK_MATNR.
IF ( NOT MARA-MSTAE IS INITIAL ) OR
( NOT MARA-MSTAV IS INITIAL ) OR
( NOT MARA-LVORM IS INITIAL ).
MOVE '*' TO WK_MSTAE.
ENDIF.
MOVE MARA-PRDHA TO WK_PRDHA.
SELECT SINGLE MAKTX FROM MAKT INTO WK_MAKTX
WHERE MATNR = WK_MATNR
AND SPRAS = SY-LANGU.
ENDIF.
IF Z_BLOCK EQ 'B'.
IF WK_MMSTA EQ ' ' AND WK_MSTAE EQ ' '.
DELETE IVBAP.
CONTINUE.
ENDIF.
ELSEIF Z_BLOCK EQ 'U'.
IF WK_MMSTA EQ '' OR WK_MSTAE EQ ''.
DELETE IVBAP.
CONTINUE.
ENDIF.
ELSE.
IF WK_MMSTA EQ '' OR WK_MSTAE EQ ''.
MOVE '*' TO WK_BLOCK.
ENDIF.
ENDIF.
IF WK_PRDHA IN Z_PRDHA. "I4792
MOVE WK_BLOCK TO IVBAP-BLOCK.
MOVE WK_PRDHA TO IVBAP-PRDHA.
MOVE WK_MAKTX TO IVBAP-MAKTX.
MODIFY IVBAP.
ELSE. "I4792
DELETE IVBAP. "I4792
ENDIF. "I4792
IF NOT Z_ALNUM[] IS INITIAL. "I9076
SELECT SINGLE * FROM MAEX "I9076
WHERE MATNR = IVBAP-MATNR "I9076
AND ALNUM IN Z_ALNUM. "I9076
IF SY-SUBRC <> 0. "I9076
DELETE IVBAP. "I9076
ENDIF. "I9076
ENDIF. "I9076
ENDLOOP.Hi Nagendra!
Get Sales Order Details
CLEAR IVBAP.
REFRESH IVBAP.
check ivbak is not initial
SELECT VBELN POSNR MATNR NETWR KWMENG WERKS FROM VBAP
INTO CORRESPONDING FIELDS OF TABLE IVBAP
FOR ALL ENTRIES IN IVBAK
WHERE VBELN = IVBAK-VBELN
AND MATNR IN Z_MATNR
AND WERKS IN Z_WERKS
AND ABGRU = ' '.
Check for Obsolete Materials - Get Product Hierarhy/Mat'l Description
SORT IVBAP BY MATNR WERKS.
CLEAR: WK_MATNR, WK_WERKS, WK_PRDHA, WK_MAKTX,
WK_BLOCK, WK_MMSTA, WK_MSTAE.
avoid select widin loop. instead do selection outside loop.u can use read statement......and then loop if required.
LOOP AT IVBAP.
CLEAR WK_INVDATE. "I6677.sn
SELECT MAX( ERDAT ) FROM VBRP INTO WK_INVDATE WHERE
AUBEL EQ IVBAP-VBELN AND
AUPOS EQ IVBAP-POSNR.
IF SY-SUBRC = 0.
MOVE WK_INVDATE TO IVBAP-INVDT.
MODIFY IVBAP.
ENDIF. "I6677.e n
SELECT SINGLE * FROM MBEW WHERE "I6759.sn
MATNR EQ IVBAP-MATNR AND
BWKEY EQ IVBAP-WERKS AND
BWTAR EQ SPACE.
IF SY-SUBRC = 0.
MOVE MBEW-STPRS TO IVBAP-STPRS.
IVBAP-TOT = MBEW-STPRS * IVBAP-KWMENG.
MODIFY IVBAP.
ENDIF. "I6759.en
IF IVBAP-MATNR NE WK_MATNR OR IVBAP-WERKS NE WK_WERKS.
CLEAR: WK_BLOCK, WK_MMSTA, WK_MSTAE, WK_PRDHA, WK_MAKTX.
MOVE IVBAP-MATNR TO WK_MATNR.
MOVE IVBAP-WERKS TO WK_WERKS.
SELECT SINGLE MMSTA FROM MARC INTO MARC-MMSTA
WHERE MATNR = WK_MATNR
AND WERKS = WK_WERKS.
IF NOT MARC-MMSTA IS INITIAL.
MOVE '*' TO WK_MMSTA.
ENDIF.
SELECT SINGLE LVORM PRDHA MSTAE MSTAV FROM MARA
INTO (MARA-LVORM, MARA-PRDHA, MARA-MSTAE, MARA-MSTAV)
WHERE MATNR = WK_MATNR.
IF ( NOT MARA-MSTAE IS INITIAL ) OR
( NOT MARA-MSTAV IS INITIAL ) OR
( NOT MARA-LVORM IS INITIAL ).
MOVE '*' TO WK_MSTAE.
ENDIF.
MOVE MARA-PRDHA TO WK_PRDHA.
SELECT SINGLE MAKTX FROM MAKT INTO WK_MAKTX
WHERE MATNR = WK_MATNR
AND SPRAS = SY-LANGU.
ENDIF.
IF Z_BLOCK EQ 'B'.
IF WK_MMSTA EQ ' ' AND WK_MSTAE EQ ' '.
DELETE IVBAP.
CONTINUE.
ENDIF.
ELSEIF Z_BLOCK EQ 'U'.
IF WK_MMSTA EQ '' OR WK_MSTAE EQ ''.
DELETE IVBAP.
CONTINUE.
ENDIF.
ELSE.
IF WK_MMSTA EQ '' OR WK_MSTAE EQ ''.
MOVE '*' TO WK_BLOCK.
ENDIF.
ENDIF.
IF WK_PRDHA IN Z_PRDHA. "I4792
MOVE WK_BLOCK TO IVBAP-BLOCK.
MOVE WK_PRDHA TO IVBAP-PRDHA.
MOVE WK_MAKTX TO IVBAP-MAKTX.
MODIFY IVBAP.
ELSE. "I4792
DELETE IVBAP. "I4792
ENDIF. "I4792
IF NOT Z_ALNUM[] IS INITIAL. "I9076
SELECT SINGLE * FROM MAEX "I9076
WHERE MATNR = IVBAP-MATNR "I9076
AND ALNUM IN Z_ALNUM. "I9076
IF SY-SUBRC 0. "I9076
DELETE IVBAP. "I9076
ENDIF. "I9076
ENDIF. "I9076
endloop.
U have used many select queries widin loop-endloop which is a big hindrance as far as performance is concerned.Avoid such practice.
Thanks
Deepika -
Crystal Report Windows Forms Viewer Error in 1 Workstation after upgrade of PL
Hi all,
We just upgraded SAP from 8.82 PL02 to 8.82 PL15.
Afterwards, in just 1 workstation, Crystal Reports layouts have Crystal Report Windows Forms Viewer error I attach.
Before the upgrade this error did not happen.
No permissions or authorizations were changed in the workstation.
The Crystal Reports layouts remain working fine in server and in the other workstations.
In the workstation following are installed:
- Operating System Windows 7;
- Microsoft .NET Framework 4.5;
- SAP Crystal Reports runtime engine for. NET Framework;
- Crystal Report 2008 Runtime SP6;
- Microsoft SQL Server 2008 R2 Native Client.
All, but the operating system, are equal to the other workstations.
User has edit access to SAP folders, temp and access to the attach path.
We already uninstalled SAP client and client agent and re-installed it but with no avail.
Can anyone help me?
Thanks in advance.
Best regards,
Pedro MarianoHi San Xu,
Thank you for your input.
However I'm facing problem with each software is suitable.
I installed SAP Crystal Reports for SAP Business One (CR 2011 V14.0.4.738), but with no avail.
Thanks in advance.
Best regards,
Pedro Mariano -
Hi all,
I am on a field campaign with my Labview-controlled instrument. I wanted to make a small change to the code and build it again for uploading to a cFP-2020 Fieldpoint but the application builder stopped with the following error message:
Error 7 occurred at ABAPI Dist Report Read Link Info Error.vi -> ABAPI Dist Cmp Settings to Disk Hier.vi -> ABAPI Get Settings From File2.vi -> ABAPI Get Settings From File.vi -> RTBEP_Invoke_Build_Engine.vi -> RTBUIP_Build_Invoke.vi -> RTBUIP_Build_Invoke.vi.ProxyCaller
This is another computer than the one I used in the lab previously so might have forgotten to install something. I just copied the whole application folder with project file and subfolders
to the Laptop I am using now. Labview version should be the same though (8.20).
Any suggestions?
OlafHello Olaf,
This error is usually found when a subVI or a support file (DLL, custom control, etc)
isn't able to be found by the application builder. Possible reasons
for this could include subVIs no longer located in their original
paths and in need to be relinked, a DLL that isn't included in the build,
and many other possibilities.
You wrote that you copied the project from another PC, so it is very possible that some file went missing. Are all VIs in your project executable?
You could try to mass compile all the VIs in your project and see if that helps.
Regards,
Johannes
AE, NI Germany -
XML Report Publisher program is erroring out
Hi All,
I've customized the AR Customer Statements.
I've created a data definition as "ARXSGP" and uploded the sample_output.xml of Statement Generation Program to it. Also I've created a Data template as "ARXSGPO" and attached the data definition "ARXSGP" to it and uploaded the customized rtf file "XXHCC_CLE_F_ARCUSBALSL.rtf" and set the default output type to PDF.
As I donot wish to call the XML Report Publisher program manually every time when I Print the Statements through Print Documents-->Statements.
So I've done the below customization in ARXSGP.rdf file ie; Print Statements Report which is an Oracle Report.
I've added the below code in After Report trigger.
=======================================
FUNCTION AfterReport
RETURN BOOLEAN
IS
BEGIN
Below code added for Customer Statement Case Study
DECLARE
l_req_id NUMBER := 0;
L_XML_LAYOUT BOOLEAN := TRUE;
BEGIN
L_XML_LAYOUT := FND_REQUEST.ADD_LAYOUT (TEMPLATE_APPL_NAME => 'AR', TEMPLATE_CODE => 'ARXSGP', TEMPLATE_LANGUAGE => 'en', TEMPLATE_TERRITORY => 'US', OUTPUT_FORMAT => 'PDF');
IF L_XML_LAYOUT THEN
srw.message(20001, 'Template is picked ');
srw.message(20002,'Concurrent request Id : '||:p_conc_request_id);
l_req_id := FND_REQUEST.SUBMIT_REQUEST('XDO',
'XDOREPPB',
NULL,
NULL,
FALSE,
:p_conc_request_id,
222, -- Receivables
'ARXSGPO', -- Statement Generate
'en-US', -- English
'N',
'RTF',
'PDF');
IF l_req_id > 0 THEN
COMMIT;
ELSE
srw.message(20004, 'Failed to submit request');
END IF;
ELSE -- Not L_XML_LAYOUT
srw.message(20005, 'Template is not picked ');
END IF;
END;
--------------------Code Ends----------------------------
SRW.USER_EXIT('FND SRWEXIT');
RETURN (TRUE);
END;
==============================================
After Printing the Statements through Print Documents-->Statements
Statement Generation Program is being called and later XML Report Publisher program is also being invoked.
But the XML Report Publisher Program is erroring out with below error.
XML Publisher: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XDOREPPB module: XML Report Publisher
Current system time is 03-SEP-2012 17:42:18
Oracle XML Publisher 5.6.3
java.lang.NumberFormatException: For input string: "ARXSGPO"
at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
at java.lang.Integer.parseInt(Integer.java:447)
at java.lang.Integer.parseInt(Integer.java:497)
at oracle.apps.xdo.oa.cp.JCP4XMLPublisher.runProgram(JCP4XMLPublisher.java:215)
at oracle.apps.fnd.cp.request.Run.main(Run.java:157)
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Output file size:
0
------------- 1) PUBLISH -------------
Disabling requested Output Post Processing. Nothing to process. The output of the request is zero byte.
Finished executing request completion options.
Concurrent request completed
Current system time is 03-SEP-2012 17:42:22
Please help out with a solution.
Thanks,
Tech Dfor r12 add one row for parameter "Dummy for Data Security" from desc of XDOREPPB
follow works for me
SQL> set serveroutput on
SQL>
SQL> declare
2 v_request_id number;
3 begin
4
5 begin fnd_global.apps_initialize(0, 20419, 0); end;
6 v_request_id := FND_REQUEST.SUBMIT_REQUEST('XDO',
7 'XDOREPPB',
8 NULL,
9 NULL,
10 FALSE,
11 'N', -- Dummy for Data Security
12 9888637, -- Request
13 0, -- Template Application
14 'XXAND10_1', -- Template
15 'en-US', -- Template Locale
16 'N', -- Debug Flag
17 'RTF', -- Template Type
18 'RTF' -- Output Format
19 );
20
21 dbms_output.put_line(v_request_id);
22 if v_request_id > 0 then
23 dbms_output.put_line('successfully submitted.');
24 commit;
25 else
26 dbms_output.put_line('not submitted.');
27 rollback;
28 end if;
29
30 end;
31 /
9888651
successfully submitted.
PL/SQL procedure successfully completed
SQL> 'Y' for "Dummy for Data Security" also works for me
SQL> declare
2 v_request_id number;
3 begin
4
5 begin fnd_global.apps_initialize(0, 20419, 0); end;
6 v_request_id := FND_REQUEST.SUBMIT_REQUEST('XDO',
7 'XDOREPPB',
8 NULL,
9 NULL,
10 FALSE,
11 'Y', -- Dummy for Data Security
12 9888637, -- Request
13 0, -- Template Application
14 'XXAND10_1', -- Template
15 'en-US', -- Template Locale
16 'N', -- Debug Flag
17 'RTF', -- Template Type
18 'RTF' -- Output Format
19 );
20
21 dbms_output.put_line(v_request_id);
22 if v_request_id > 0 then
23 dbms_output.put_line('successfully submitted.');
24 commit;
25 else
26 dbms_output.put_line('not submitted.');
27 rollback;
28 end if;
29
30 end;
31 /
9888652
successfully submitted.
PL/SQL procedure successfully completed
SQL> -
Crystal report add on installation error
Hi ,
While starting the crystal report addon following the error is coming--> retrieving the COM class factory component with CLSID{3EBB7859-E4 E3-4D77-B ,our operting system -- windows 2003 server-- 64 bit ,
Regards
Naresh KHi Naresh,
You can find more information on the thread:
SAP Business One and Crystal Reports
There are quite few threads in 10 pages for Crystal Reports. You may post it there too.
Thanks,
Gordon -
I have taken on an existing vb.net project done in Visual Studio 2008 with crystal reports version Crystal Report XI.
The reports on their own work very well. Problem is I need to add information to my report which is a 'many-to-one' situation where for each Project Id that I am displaying I need to display several attached documents and the report I am working on is for several Project Id's.
I figured this would be a perfect situation for a SubReport. I created a separate report which calls a stored procedure to get all of the Attached Documents for a specific Project Id. I thought if I were to add this new SubReport to the Original Report and link the Project Id's, easy-peazy, I would be done.
This is not the case. I have vb code that loads the Original Report with a stored procedure and when this code runs with the setup I described above it fails when it is creating the final report with the following error:
Logon failed. Details: crdb_adoplus : Object reference not set to an instance of an object. Error in File C:\~\ProjectDescriptionReport {6BA19F79-2A12-4826-B1F6-456EF799963B}.rpt: Unable to connect: incorrect log on parameters.
I have no specific connections in my vb code for the reports. If I do not add the subreport to the main report, it loads correctly, so I know the error is caused by the subreport.
This is the code that creates the original report (sorry for dumping the code here, i just thought it would be easier to see all the code) :
Public Function LoadReport(ByVal inProjectNum As Integer, ByVal strProjectName As String) As DataTable ', ByVal inFiscalYear As Integer, ByVal inCompany As String) As DataTable
Dim cnn As SqlConnection = Nothing
Dim cmd As Data.SqlClient.SqlCommand
Dim obj As New clsDataClass
Dim dataAdapter As SqlClient.SqlDataAdapter
Try
LoadReport = New DataTable("DescriptionReport")
cmd = New SqlCommand()
cnn = obj.Create_Connection()
With cmd
.CommandType = Data.CommandType.StoredProcedure
.Connection = cnn
.CommandTimeout = "60"
.CommandText = "usp_GetProjectGroupSpecsCR"
.Parameters.AddWithValue("@ProjectNumber", inProjectNum)
.Parameters.AddWithValue("@ProjectName", strProjectName)
End With
dataAdapter = New System.Data.SqlClient.SqlDataAdapter
dataAdapter.SelectCommand = cmd
dataAdapter.Fill(LoadReport)
Dim oRpt As New ReportDocument()
oRpt.Load(Server.MapPath("ProjectDescriptionReport.rpt"))
oRpt.Refresh()
oRpt.SetDataSource(LoadReport)
'oRpt.OpenSubreport("AttachmentsReport").SetDataSource(LAR)
oRpt.SetParameterValue("inProjectNum", inProjectNum)
oRpt.SetParameterValue("strProjectName", strProjectName)
oRpt.ExportToHttpResponse(ExportFormatType.PortableDocFormat, Response, True, "Projects_DescriptionReport") 'inCompany & "ProjectsReport_Description" & inFiscalYear) <-- Line where the error occures.
What I need to know is what is the proper way to add a subreport to a vb.net application?
From the ways I have tried it is clearly not working and I am out of ideas. I am fairly new to Crystal Reports and this way of coding it.
Any help for this would be greatly appreciated, I've been stuck on this for a while and am finally reaching out to the Crystal Report Specialists.
Thank you in advance,
BryanHi Bryan,
You may want to check the Connection properties also. I think the MS Data.SqlClient.SqlCommand is using the MDAC driver, or could be modified.
If you are connecting to SQL Server 2008 or above you should be using the SQL Native 10 or 11 Client.
As Dell suggests have a look at the samples and if you can use a DSN ( 32 bit or 64 bit ODBC Admin )
Also search for "CRlogger", you'll find how to enable CR's database logging component and may help show you what part is failing.
Don -
Function MakeList(ByVal items As Object()) As String
If items Is Nothing Then
Return Nothing
END if
Dim builder As System.Text.StringBuilder =
New System.Text.StringBuilder()
builder.Append("<div>")
For Each item As Object In items
builder.Append("<div <ul>")
builder.Append(item)
builder.Append("</ul>")
Next
builder.Append("</div>")
Return builder.ToString()
End Function
Function Length(ByVal items as Object()) as Integer
If items is Nothing Then
Return 0
End If
Return items.Length
End FunctionHi Wintersbay,
According to your description, when you use the custom code in SSRS report, you got the error message.
To solve the problem, please refer to the custom code below:
Function MakeList(ByVal items As Object) As String
If items Is Nothing Then
Return Nothing
END if
Dim builder As System.Text.StringBuilder =
New System.Text.StringBuilder()
builder.Append("<div>")
For Each item As Object In items
builder.Append("<div <ul>")
builder.Append(item)
builder.Append("</ul>")
Next
builder.Append("</div>")
Return builder.ToString()
End Function
Function Length(ByVal items as Object) as Integer
If items is Nothing Then
Return 0
End If
Return items.Length
End Function
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support -
Issue in developing cross tab report with wizard in 10.1.3.2.1
Hi Gurus,
We are trying to develope group above cross tab report with wizard in BI Publisher 10.1.3.2.1 .
i am unable to achieve multiple level columns dynamically.Using cross tab wizard i can achieve single level measure column ,but not the second level column.
Output should look like this:
Country1
Region1 Region2 Region3 --(level1 column)
d1 d2 d3 d1 d2 d3 d1 d2 d3 -- (level2 column)
Row1 10 20 30 70 80 90 40 70 90 --data
Row2 21 24 54 65 23 64 64 76 87 --data
Here Regions and d1 d2 d3 may vary based on xml data.Also we have page break on country.
Haven't get any solution till now.
Also unable to achieve under line and overline on data for total row.
Need help urgently in this issue.
Thanks,
Mahesh
Edited by: user13450806 on Jan 7, 2011 12:43 AMHi Gurus,
I am still waiting for some one to help me in this issue.
It is very urgent for me to solve this. Did not get any help yet.
--Mahesh -
Report Server WMI Provider Error: Invalid namespace
Domain Server, Sql2012 server and SP2013 Server (3 vm servers)
the sql server reporting services service application and applications Proxy are installed and started (SP2013 Sever)
the sql server PowerPivot system Service and SQL server Reporting Services Service are Started (in Services on Server)
in sql server 2012 sp1 reporting service configured (web service URL and Report Manager URL are configured and tested, the database report server mode is native) (SQl 2012 Server)
under general Application Settings .. trying to setup the "Reporting Service Integration" give us the above error message (Report Server WMI Provider Error: Invalid namespace)
I was looking for all blogs and TechNet material but without success.Follow these steps:
1) Uninstall SSRS from the Database Engine server (MSSQLSERVER instance).
2) Install SSRS on the SharePoint server using the "Reporting Services - SharePoint" install option during SQL Feature selection, no other services are required (e.g. you do not need to install Database Engine services).
3) You should then see SSRS as a Service Instance in Central Admin -> Manage Services on Server, at which point you can also create an SSRS Service Application.
While this guide (http://msdn.microsoft.com/en-us/library/jj219068.aspx#bkmk_install_SSRS) walks you through it, this is for a single server install where the Database Engine is also installed on SharePoint, not something you want to do.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Financial Reporting Studio has overflow error when opening any report
Hello everyone!
I faced with problem in FR Studio. When I try open any report is appears an error "Overflow". In others machines this error is not appears.
Version of FR Studio: 11.1.2.757
Many thanks for your advices!Uninstall CRVS2010 that you currently have installed.
To remove the assemblies from the GAC use gacutil. Google will get you a number of links on how to. Also, see the KB [1535325 - How to remove CRVS2010 Beta 2|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533333335333333323335%7D.do].
Reinstall CRVS2010 SP1 from here:
SAP Crystal Reports, developer version for Microsoft Visual Studio: Updates & Runtime Downloads [original link is broken]
- Ludek -
How to resolve "Internal error: ABAP Report cannot be loaded" error
Hi All,
I am new to SAP.Please help me out from this problem.
When I am trying to debug BSP page, in debugging mode it shows "Internal error: ABAP Report cannot be loaded" error and then dumps.
In transaction ST22 it shows this dump something like this
Runtime Errors MESSAGE_TYPE_X
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
1 FUNCTION AC_SYSTEM_FLUSH .
2 *"----
3 ""Lokale Schnittstelle:
4 *" IMPORTING
5 *" VALUE(CALLED_BY_SYSTEM) TYPE C OPTIONAL
6 *" EXCEPTIONS
7 *" CNTL_SYSTEM_ERROR
8 *" CNTL_ERROR
9 *"----
10 data: sysubrc like sy-subrc.
11
12 CALL FUNCTION 'AC_FLUSH_CALL'
13 EXPORTING
14 SYSTEM_FLUSH = 'X'
15 CALLED_BY_SYSTEM = CALLED_BY_SYSTEM
16 IMPORTING
17 MESSAGE_NR = sysubrc
18 MESSAGE_TEXT = SY-MSGLI.
19
20 sy-subrc = sysubrc.
21
22 CASE SY-SUBRC.
23 WHEN 0.
24 WHEN 1.
25 * system_error
26 MESSAGE ID 'CNDP' TYPE 'X' NUMBER 007 RAISING CNTL_SYSTEM_ERROR.
27 WHEN 2.
28 * method_call_error
>>>>> MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR.
30 WHEN 3.
31 * property_set_error
32 MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR.
33 WHEN 4.
34 * property_get_error
35 MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR.
36 WHEN OTHERS.
37 RAISE CNTL_ERROR.
38 ENDCASE.
39
40 ENDFUNCTION.
Thanks in advance
Sunil ChoudhuryHi Sunil,
The reason for this could be anything, anyways look up for an OSS note with the error message first.
As a workaround, you can try to use the classic debugger instead of the new ABAP debugger and see if it works.
You should be logged into SAP via SAP GUI when you are debugging BSP.
Regards
Chen
Maybe you are looking for
-
Two or three weeks ago, I had a cracked screen replaced on my iPad Mini 2 with retina display (32G). It worked perfectly for 2-3 weeks, so I don't know how relevant the screen repair is. Anyway, the iPad is currently running iOS 8.1.3. I completel
-
Can't get ipv6 address assigned correctly.
I use NetworkManager and dhclient for auto-configuration but it has some weird problems. When I boot up my laptop, I only have chance to get access to ipv6 network, when I fail, I tried to delete the connection in Network Management Settings, and the
-
IMac wont boot and has yellow squares at launch!!!
Ok, so Friday as I come home from buying Snow Leopard all excited because I also bought an DVI to HDMI cable to hook my 24 inch 3.06 10.5.8 iMac up to my TV. So as my laptop is upgrading to snow leopard I decide to hook up the TV. I plug the cables i
-
Illustrator CS4 stürzt beim öffnen einer PDF ab / Illustrator CS4 crashes while opening a PDF
Hallo liebe Community, leider kann mir der telefonsiche support nicht weiterhelfen (Produkt ist zu alt), deshalb seid ihr nun meine letzte Chance! Nun zu meinem Problem: ich benutze seit einigen Jahren erfoglreich den Adobe Illustrator aus CS4 um PDF
-
Update 7.5.2 breaks rtsp
7.5.2 firmware update breaks H.264 streaming video. It's not NAT port forwarding because I can stream using same playlist settings via tethered phone. I'm considering reinstalling previous firmware (I think that is 7.5.1 - comments?)