Report error SCCM 2012 R2

Hi all,
We have implemented SCCM 2012 R2 with remote SQL instance, and installed reporting service point after that when we try to run report we aregetting below error.
Error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: Error has occurred during report processing ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: The
user's identity can not be assumed for the DataSource1 data source. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException: Login failed. Make sure that the username and password are correct. ---> System.Exception: Um weitere Informationen
zu diesem Fehler zu erhalten, navigieren Sie zum Berichtsserver auf dem lokalen Servercomputer, oder aktivieren Sie Remotefehler.
Microsoft.ConfigurationManagement.ManagementProvider.SmsException
Fehler bei der Berichtsverarbeitung.
Stack Trace:
   at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.GetParameters()
   at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.LoadParameters(IReport report, Collection`1 navigationParameters, IResultObject resultObject)
   at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerPresenter.Worker_DoWork(Object sender, DoWorkEventArgs e)
   at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
   at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
System.Web.Services.Protocols.SoapException
Fehler bei der Berichtsverarbeitung. ---> Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: Fehler bei der Berichtsverarbeitung. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Die Identität des Benutzers
kann für die DataSource1-Datenquelle nicht angenommen werden. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException: Fehler bei der Anmeldung. Stellen Sie sicher, dass der Benutzername und das Kennwort korrekt sind. ---> System.Exception:
Um weitere Informationen zu diesem Fehler zu erhalten, navigieren Sie zum Berichtsserver auf dem lokalen Servercomputer, oder aktivieren Sie Remotefehler.
Stack Trace:
   at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.GetParameters()
   at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.LoadParameters(IReport report, Collection`1 navigationParameters, IResultObject resultObject)
   at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerPresenter.Worker_DoWork(Object sender, DoWorkEventArgs e)
   at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
   at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)

Make sure:
You typed the correct user and password for reporting services point account at SCCM reporting services point properties.
Grant reporting services point user account the right "Allow log on locally" through Local Policy or Group Policy
http://technet.microsoft.com/en-us/library/cc756809(WS.10).aspx
Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks.

Similar Messages

Execute report error SCCM 2012 R2 CU1

Hello guys, my Customer have a SCCM 2012 R2 CU1 all part of SCCM is working exept the reporting.
I have install the reporting role and the installation succeeded on install but when I run any of the report we have an error:
Une erreur s'est produite lors du traitement du rapport. ---> Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: Une erreur s'est produite lors du traitement du rapport. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException:
Impossible d'emprunter l'identité de l'utilisateur pour la source de données 'AutoGen__5C6358F2_4BB6_4a1b_A16E_8D96795D8602_'. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException: Échec de l'ouverture de session. Vérifiez que le
nom d'utilisateur et le mot de passe sont corrects. ---> System.Exception: Pour obtenir plus d'informations sur cette erreur, accédez au serveur de rapports sur le serveur local ou activez les erreurs distantes.
Microsoft.ConfigurationManagement.ManagementProvider.SmsException
Une erreur s'est produite lors du traitement du rapport.
Stack Trace:
   at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.GetParameters()
   at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.LoadParameters(IReport report, Collection`1 navigationParameters, IResultObject resultObject)
   at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerPresenter.Worker_DoWork(Object sender, DoWorkEventArgs e)
   at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
   at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
System.Web.Services.Protocols.SoapException
Une erreur s'est produite lors du traitement du rapport. ---> Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: Une erreur s'est produite lors du traitement du rapport. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException:
Impossible d'emprunter l'identité de l'utilisateur pour la source de données 'AutoGen__5C6358F2_4BB6_4a1b_A16E_8D96795D8602_'. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException: Échec de l'ouverture de session. Vérifiez que le
nom d'utilisateur et le mot de passe sont corrects. ---> System.Exception: Pour obtenir plus d'informations sur cette erreur, accédez au serveur de rapports sur le serveur local ou activez les erreurs distantes.
Stack Trace:
   at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.GetParameters()
   at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.LoadParameters(IReport report, Collection`1 navigationParameters, IResultObject resultObject)
   at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerPresenter.Worker_DoWork(Object sender, DoWorkEventArgs e)
   at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
   at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
Do you have an idea?

Yes but, where is the place to add name and password? I have use the same account that I have take to install sccm. I have seted the name when i have installed the report role is it the place you talked?
Administration/Servers and Site System Roles in feature Reporting Service/Properties/ option: Reporting Services Point Account.

Error Report Service SCCM 2012 R2

Hy Guys,
I am having problem to generate reports in SCCM using the Report Service.
Every report that will generate displays the error below.
I am using SQL Server 2012 Sp1 to report Service.
The User I'm using this with permission of SA in the instance.
In the report Db Service he is as datareader.
Erro no processamento de relatório. ---> Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException:
Erro no processamento de relatório. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Falha na execução da consulta para o conjunto de dados 'DataSetAdminID'. ---> System.Exception: Para obter mais informações sobre este erro,
navegue até o servidor de relatório, na máquina de servidor local, ou habilite erros remotos
Microsoft.ConfigurationManagement.ManagementProvider.SmsException
Erro no processamento de relatório.
Stack Trace:
em Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.GetParameters()
em Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.LoadParameters(IReport
report, Collection`1 navigationParameters, IResultObject resultObject)
em Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerPresenter.Worker_DoWork(Object
sender, DoWorkEventArgs e)
em System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
em System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
System.Web.Services.Protocols.SoapException
Erro no processamento de relatório. ---> Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException:
Erro no processamento de relatório. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Falha na execução da consulta para o conjunto de dados 'DataSetAdminID'. ---> System.Exception: Para obter mais informações sobre este erro,
navegue até o servidor de relatório, na máquina de servidor local, ou habilite erros remotos
Stack Trace:
em Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.GetParameters()
em Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.LoadParameters(IReport
report, Collection`1 navigationParameters, IResultObject resultObject)
em Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerPresenter.Worker_DoWork(Object
sender, DoWorkEventArgs e)
em System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
em System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
Lucas Rezende Esse conteúdo e fornecido sem garantias de qualquer tipo, seja expressa ou implícita. Por favor, lembre-se de Marcar como Resposta as respostas que resolveram o seu problema. Essa e uma maneira comum de reconhecer aqueles que o ajudaram e fazer
com que seja mais fácil para os outros visitantes encontrarem a resolução mais tarde.

Hi,
Can you run the report successfully from
/Reportserver">http://<servername>/Reportserver ?
If the reports cannot run successfully, please try to fix the SSRS problem.
You could also try the steps in Garth's reply.
Remove the reporting point from CM12
Remove SSRS from SQL
Reboot the SQL server
Reinstall SSRS
Ensure the right Service package and CUs are installed on SQL.
Configuration SSRS
Ensure that SSRS works before moving forward. <aka browse to
/reports">http://<server>/reports make sure that you can see the CM12 Folder and reports
https://social.technet.microsoft.com/Forums/en-US/2b36b2a3-4871-4441-adc8-ece2e69c2c72/reporting-in-sccm-2012?forum=configmanagergeneral
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Download Reports from SCCM 2012 Using PowerShell

Hi,
I Wants to Download reports from SCCM 2012 using powershell but couldn't find a way.
I used Invoke-Cmreport but it says no reporting Service point on site code XYZ and server ABC
But Reporting Service is enabled and works fine as i can check/download report manually
Thanks

Hi,
You could have a look at the script in the blog below.
How to Download All Your SSRS Report Definitions(RDL files) Using PowerShell.
http://www.sqlmusings.com/2011/03/28/how-to-download-all-your-ssrs-report-definitions-rdl-files-using-powershell/
Note: Microsoft provides third-party contact information
to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce

Is there any report in SCCM 2012 to list out all the physcial machine and all the virtual machine?

Is there any report in SCCM 2012 to list out all the physcial machine and all the
virtual machine?
and list all VMs for each physical server.

Hi,
there is no such builtin report but you can easily crete one as all information is in the database.
http://www.scconfigmgr.com/2014/01/24/create-custom-reports-for-configmgr-2012-with-report-builder/
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

XML errors when running specific reports in SCCM 2012, using SQL Server 2008 R2 Reporting Services

I've posted this to the SCCM 2012 forum and only received one response so far that states that this is a known issue that has been discussed before and isn't easy to fix; I was not given any actual solution either. Since this involves SSRS I
thought I would try my luck here as well.
I'm having almost exactly the same problem as is referenced in this article: http://social.msdn.microsoft.com/Forums/uk/sqlreportingservices/thread/587a3319-bc54-4d30-bb3f-bb90a0c6ec50.  When
I try to run either of these reports (Computers with specific software registered in Add Remove Programs; Count of instances of specific software registered with Add or Remove Programs) I receive the XML error shown in the attached screenshot. I'm fairly
sure the problem is the same as the other admin was experiencing and I just need to remove the unprintable characters (of the application name) from the dbo.v_Add_Remove_Program column.
The error references 0xFFFF but I could not find what that exactly translates too, other than it appears to be at the end of the spectrum for Unicode characters. I used the following sql query to search for the 0xFFFF entry, but no results were found:
use CM_UV2
Select distinct
CHARINDEX(cast(0xFFFF as varchar(1)),DisplayName0),
DisplayName0
from
dbo.v_Add_Remove_Programs
Where
CHARINDEX(cast(0xFFFF as varchar(1)),DisplayName0) > 0
When I used the original hex value of 0x28 I get plenty of results returned with "(" in them so the query seems sound. One of the articles I was searching mentioned running the query manually using the Management Studio and looking for strange characters
there but I'm not sure how to do that.
Basically I just need help finding the offending character and removing it. I also need to be able to replicate this for other strings as this looks like an error that will reoccur whenever any new software appears that has weird encoding in the title.
Thank you in advance for any help given.
Über Random

Hi Uber,
This is a known issue that error occurs when running report "Count of instances of specific software registered with Add or Remove Programs" due to non-printable characters for XML. Based on internal research, the hotfix for this issue will be
included in the System Center 2012 Configuration Manager Service Pack 1.
As a workaround, you can remove the nonprintable character populated into the report parameter by referring to the following KB article:
http://support.microsoft.com/KB/914159
Hope this helps.
Regards,
Mike Yin
Mike Yin
TechNet Community Support

Error when i try execute report in SCCM 2012 R2

Hello, good morning.
Sorry for my english. Im Brazilian!
I have an environment with SCCM 2012
R2 and when I run a direct
report server I get the following error:
The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: The referenced account is currently locked out and may not be logged on to.
When I run a report I created with
report builder does not bring me
error.
Thanks!!!
Atenciosamente Julio Araujo

Hi Julio,
It seems to me that the data source, being used by this report, has some saved credentials which are not valid anymore (locked out). Edit the report to use the same datasource you use for your custom reports. Also make sure that your datasets use the correct
datasource after you change it. Do not used saved credentials in your reports unless necessary. And in case you do: use a service account of which the password never changes or expires.
Bart

There is a problem connectiong to the specified reporting Server SCCM 2012 SSRS

hi,
I'm Trying to install reporting services point SCCM 2012, I configured the
site system role without problems, but when I tried to configure the report options I get this error:
"There is a problem connectiong to the specified reporting, please check the conection and make sure SQL Reporting Service is running on the especified server. "
The reporting service is running on remote server, I'm using SQL SERVER 2008.
Two Questions:
1: Which is the cause of the error?
2: Which right permissions must have the reporting services point account?
Thanks.

Are you allowing port 1433 through the firewall?
Which release of SQL Server are you using and have you applied the relevant minimum CU? Details here
http://sccmentor.wordpress.com/2013/12/31/sql-server-site-database-configuration/
Which version of SRS is installed? If 10.50.1600.1 you will need to get this updated to above 2500 level.
http://www.mssccmfaq.de/2012/05/15/srs-not-detected-as-running/
Cheers
Paul | sccmentor.wordpress.com

Some reports in SCCM 2012 show no information

Hello!
I have ran report "Computers with low free disk space (less than specified % free)" but it shows no information regardless of that what collection I select (All systems, custom created collections).
The reports about another hardware parts show the requested information successfully, for example about processor speed, hard disk space etc.
In addition to that, the report "Computers that meet the recommended system requirements for Windows 7" does not show any information either.
For information, the Hardware inventory works fine and there are no errors related to client status.
Also in report "Logical disk space history for a specific computer" I can't select Values for "Computer name field" as it's inactive.
I can't understand why some reports don't work correctly, as in SCCM2007 all worked fine without any reports and settings customization.
Does anyone encountered with such issues? Should I extend any inventory classes or enable any ones?

I have found some information about situation with free disk space reporting on URL http://e-enfra.blogspot.com/2012/02/sccm-2012-free-disk-space-is-not.html
I hope it will help me.
But the other questions still remain.

Boot\BCD error - SCCM 2012 R2

Hi,
This is a last ditch attempt before I throw in the towel and rebuild the server.
I am running an SCCM 2012 R2 Hierarchy with two primaries and multiple distribution points.
One of our main DPs has started coming up with an error when pxe booting a windows 7 machine. This happened after a corrupt driver was added to the boot image. The driver was removed and all the DP's rolled back but the issue still remains on this server
alone. We use an IPhelper to point the pxe requests at this server.
The error message is:
File: \Boot\BCD
Status: 0xc0000098
Info: The Windows Boot Configuration Data file does not contain a valid OS entry.
I have tried the following:
1. Removing the PXE role and reapplying it.
2. Removing the Boot images and reapplying them.
3. Removing the DP altogether from the console and reapplying.
4. Removing all data from the DP and starting again.
5. Redistributing the boot images. both x86 and x64
6. creating a new boot image for both x86 and x64 and applying those.
smspxe log is as follows
D4:3D:7E:BF:11:A4, 00000000-0000-0000-0000-D43D7EBF11A4: device is not in the database.
SMSPXE 20/10/2014 09:30:44
5064 (0x13C8)
Warning: Matching Processor Architecture Boot Image (0) not found
SMSPXE 20/10/2014 09:30:44
5064 (0x13C8)
D4:3D:7E:BF:11:A4, 00000000-0000-0000-0000-D43D7EBF11A4: Not serviced.
SMSPXE 20/10/2014 09:30:44
5064 (0x13C8)
Warning: Matching Processor Architecture Boot Image (0) not found
SMSPXE 20/10/2014 09:31:04
5064 (0x13C8)
D4:3D:7E:BF:11:A4, 00000000-0000-0000-0000-D43D7EBF11A4: Not serviced.
SMSPXE 20/10/2014 09:31:04
5064 (0x13C8)
Begin validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 09:33:20
2208 (0x08A0)
Completed validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 09:33:20
2208 (0x08A0)
Begin validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 10:33:20
5012 (0x1394)
Completed validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 10:33:20
5012 (0x1394)
Found new image CAS00004 SMSPXE
20/10/2014 10:53:11 6076 (0x17BC)
ADK installation root registry value not found.
SMSPXE 20/10/2014 10:53:11
6076 (0x17BC)
Loaded C:\Windows\system32\wimgapi.dll SMSPXE
20/10/2014 10:53:11 6076 (0x17BC)
Opening image file D:\RemoteInstall\SMSImages\CAS00004\boot.CAS00004.wim
SMSPXE 20/10/2014 10:53:11
6076 (0x17BC)
Found Image file: D:\RemoteInstall\SMSImages\CAS00004\boot.CAS00004.wim
PackageID: CAS00004
ProductName: Microsoft® Windows® Operating System
Architecture: 0
Description: Microsoft Windows PE (x86)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE
20/10/2014 10:53:11 6076 (0x17BC)
Closing image file D:\RemoteInstall\SMSImages\CAS00004\boot.CAS00004.wim
SMSPXE 20/10/2014 10:53:11
6076 (0x17BC)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 10:53:40
6076 (0x17BC)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 10:53:40
6076 (0x17BC)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 10:58:12
4928 (0x1340)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 10:58:12
4928 (0x1340)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 10:59:07
4928 (0x1340)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 10:59:07
4928 (0x1340)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:00:05
4928 (0x1340)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:00:05
4928 (0x1340)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:05:24
4928 (0x1340)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:05:24
4928 (0x1340)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:06:05
4928 (0x1340)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:06:05
4928 (0x1340)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:07:15
4928 (0x1340)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:07:15
4928 (0x1340)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:07:58
4928 (0x1340)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:07:58
4928 (0x1340)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:09:31
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:09:31
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:11:58
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:11:58
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:13:52
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:13:52
4664 (0x1238)
Client lookup reply: <ClientIDReply><Identification Unknown="0" ItemKey="0" ServerName=""><Machine><ClientID/><NetbiosName/></Machine></Identification></ClientIDReply>
SMSPXE
20/10/2014 11:15:27 5064 (0x13C8)
E8:03:9A:B3:F3:8A, 163A84E0-1DD8-11B2-8000-DF82815C2DDB: device is not in the database.
SMSPXE 20/10/2014 11:15:27
5064 (0x13C8)
Getting boot action for unknown machine: item key: 2046820364
SMSPXE 20/10/2014 11:15:27
5064 (0x13C8)
Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="2046820364" ServerName=""><Machine><ClientID>47938388-164c-4bfb-8621-28b57859ad3c</ClientID><NetbiosName/></Machine></Identification><PXEBootAction
LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="PNL20009" OfferIDTime="26/02/2014 15:13:00" PkgID="PNL0000C" PackageVersion="" PackagePath="http://INTCMNCLDP001.intraining.co.uk/SMS_DP_SMSPKG$/CAS00004"
BootImageID="CAS00004" Mandatory="0"/></ClientIDReply>
SMSPXE
20/10/2014 11:15:27 5064 (0x13C8)
E8:03:9A:B3:F3:8A, 163A84E0-1DD8-11B2-8000-DF82815C2DDB: found optional advertisement PNL20009
SMSPXE 20/10/2014 11:15:27
5064 (0x13C8)
Getting boot action for unknown machine: item key: 2046820364
SMSPXE 20/10/2014 11:16:14
5064 (0x13C8)
Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="2046820364" ServerName=""><Machine><ClientID>47938388-164c-4bfb-8621-28b57859ad3c</ClientID><NetbiosName/></Machine></Identification><PXEBootAction
LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="PNL20009" OfferIDTime="26/02/2014 15:13:00" PkgID="PNL0000C" PackageVersion="" PackagePath="http://INTCMNCLDP001.intraining.co.uk/SMS_DP_SMSPKG$/CAS00004"
BootImageID="CAS00004" Mandatory="0"/></ClientIDReply>
SMSPXE
20/10/2014 11:16:14 5064 (0x13C8)
E8:03:9A:B3:F3:8A, 163A84E0-1DD8-11B2-8000-DF82815C2DDB: found optional advertisement PNL20009
SMSPXE 20/10/2014 11:16:14
5064 (0x13C8)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:26:15
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:26:15
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:27:12
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:27:12
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:27:25
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:27:25
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:28:36
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:28:36
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:29:41
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:29:41
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:30:43
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:30:43
4664 (0x1238)
Begin validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 11:33:20
4664 (0x1238)
Completed validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 11:33:20
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:33:51
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:33:51
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:35:31
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:35:31
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:37:29
6076 (0x17BC)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:37:29
6076 (0x17BC)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:39:25
6076 (0x17BC)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:39:25
6076 (0x17BC)
================= PXE Provider shutdown. =====================
SMSPXE 20/10/2014 11:42:25
4700 (0x125C)
================= PXE Provider loaded. =====================
SMSPXE 20/10/2014 11:43:19
4372 (0x1114)
Machine is running Windows Longhorn. (NTVersion=0X603, ServicePack=0)
SMSPXE 20/10/2014 11:43:19
4372 (0x1114)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:43:19
4372 (0x1114)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:43:19
4372 (0x1114)
Begin validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 11:43:19
4372 (0x1114)
Completed validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 11:43:19
4372 (0x1114)
Initializing PXEPerfObject. SMSPXE
20/10/2014 11:43:19 4372 (0x1114)
Could not load logging configuration for component ccmperf. Using default values.
SMSPXE 20/10/2014 11:43:19
4372 (0x1114)
HTTP is selected for Client. The current state is 0.
SMSPXE 20/10/2014 11:43:19
4372 (0x1114)
Client lookup reply: <ClientIDReply><Identification Unknown="0" ItemKey="0" ServerName=""><Machine><ClientID/><NetbiosName/></Machine></Identification></ClientIDReply>
SMSPXE
20/10/2014 11:43:20 4372 (0x1114)
PXE::CBootImageInfo::CBootImageInfo: key= SMSPXE
20/10/2014 11:43:20 4372 (0x1114)
PXE::CBootImageInfo::CBootImageInfo: key= SMSPXE
20/10/2014 11:43:20 4372 (0x1114)
Adding CAS00004.40 SMSPXE
20/10/2014 11:43:20 4372 (0x1114)
Adding CAS00005.45 SMSPXE
20/10/2014 11:43:30 4372 (0x1114)
Found new image CAS00004 SMSPXE
20/10/2014 11:43:44 4372 (0x1114)
ADK installation root registry value not found.
SMSPXE 20/10/2014 11:43:44
4372 (0x1114)
Loaded C:\Windows\system32\wimgapi.dll SMSPXE
20/10/2014 11:43:44 4372 (0x1114)
Opening image file D:\RemoteInstall\SMSImages\CAS00004\boot.CAS00004.wim
SMSPXE 20/10/2014 11:43:44
4372 (0x1114)
Found Image file: D:\RemoteInstall\SMSImages\CAS00004\boot.CAS00004.wim
PackageID: CAS00004
ProductName: Microsoft® Windows® Operating System
Architecture: 0
Description: Microsoft Windows PE (x86)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE
20/10/2014 11:43:44 4372 (0x1114)
Closing image file D:\RemoteInstall\SMSImages\CAS00004\boot.CAS00004.wim
SMSPXE 20/10/2014 11:43:44
4372 (0x1114)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:44:34
2028 (0x07EC)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:44:34
2028 (0x07EC)
Found new image CAS00005 SMSPXE
20/10/2014 11:44:56 4372 (0x1114)
ADK installation root registry value not found.
SMSPXE 20/10/2014 11:44:56
4372 (0x1114)
Loaded C:\Windows\system32\wimgapi.dll SMSPXE
20/10/2014 11:44:56 4372 (0x1114)
Opening image file D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
SMSPXE 20/10/2014 11:44:56
4372 (0x1114)
Found Image file: D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
PackageID: CAS00005
ProductName: Microsoft® Windows® Operating System
Architecture: 9
Description: Microsoft Windows PE (x64)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE
20/10/2014 11:44:56 4372 (0x1114)
Closing image file D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
SMSPXE 20/10/2014 11:44:57
4372 (0x1114)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:45:45
2028 (0x07EC)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:45:45
2028 (0x07EC)
Begin validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 11:45:54
4372 (0x1114)
Completed validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 11:45:54
4372 (0x1114)
PXE Provider finished loading. SMSPXE
20/10/2014 11:45:54 4372 (0x1114)
Error opening file: D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim. Win32=32
SMSPXE 20/10/2014 11:46:33
4744 (0x1288)
Retrying D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
SMSPXE 20/10/2014 11:46:33
4744 (0x1288)
Boot image CAS00005 has changed since added
SMSPXE 20/10/2014 11:46:36
4744 (0x1288)
ADK installation root registry value not found.
SMSPXE 20/10/2014 11:46:36
4744 (0x1288)
Loaded C:\Windows\system32\wimgapi.dll SMSPXE
20/10/2014 11:46:36 4744 (0x1288)
Opening image file D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
SMSPXE 20/10/2014 11:46:36
4744 (0x1288)
Found Image file: D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
PackageID: CAS00005
ProductName: Microsoft® Windows® Operating System
Architecture: 9
Description: Microsoft Windows PE (x64)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE
20/10/2014 11:46:36 4744 (0x1288)
Closing image file D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
SMSPXE 20/10/2014 11:46:36
4744 (0x1288)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:46:53
2028 (0x07EC)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:46:53
2028 (0x07EC)
Boot image CAS00005 has changed since added
SMSPXE 20/10/2014 11:47:50
4744 (0x1288)
ADK installation root registry value not found.
SMSPXE 20/10/2014 11:47:50
4744 (0x1288)
Loaded C:\Windows\system32\wimgapi.dll SMSPXE
20/10/2014 11:47:50 4744 (0x1288)
Opening image file D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
SMSPXE 20/10/2014 11:47:50
4744 (0x1288)
Found Image file: D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
PackageID: CAS00005
ProductName: Microsoft® Windows® Operating System
Architecture: 9
Description: Microsoft Windows PE (x64)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE
20/10/2014 11:47:50 4744 (0x1288)
Closing image file D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
SMSPXE 20/10/2014 11:47:50
4744 (0x1288)
================= PXE Provider shutdown. =====================
SMSPXE 20/10/2014 11:47:58
4372 (0x1114)
================= PXE Provider loaded. =====================
SMSPXE 20/10/2014 11:48:26
5008 (0x1390)
Machine is running Windows Longhorn. (NTVersion=0X603, ServicePack=0)
SMSPXE 20/10/2014 11:48:26
5008 (0x1390)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:48:26
5008 (0x1390)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:48:26
5008 (0x1390)
Begin validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 11:48:26
5008 (0x1390)
Completed validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 11:48:26
5008 (0x1390)
Initializing PXEPerfObject. SMSPXE
20/10/2014 11:48:26 5008 (0x1390)
Could not load logging configuration for component ccmperf. Using default values.
SMSPXE 20/10/2014 11:48:26
5008 (0x1390)
HTTP is selected for Client. The current state is 0.
SMSPXE 20/10/2014 11:48:26
5008 (0x1390)
Client lookup reply: <ClientIDReply><Identification Unknown="0" ItemKey="0" ServerName=""><Machine><ClientID/><NetbiosName/></Machine></Identification></ClientIDReply>
SMSPXE
20/10/2014 11:48:26 5008 (0x1390)
PXE::CBootImageInfo::CBootImageInfo: key= SMSPXE
20/10/2014 11:48:26 5008 (0x1390)
PXE::CBootImageInfo::CBootImageInfo: key= SMSPXE
20/10/2014 11:48:26 5008 (0x1390)
Adding CAS00004.40 SMSPXE
20/10/2014 11:48:26 5008 (0x1390)
Adding CAS00005.45 SMSPXE
20/10/2014 11:48:50 5008 (0x1390)
Found new image CAS00004 SMSPXE
20/10/2014 11:49:15 5008 (0x1390)
ADK installation root registry value not found.
SMSPXE 20/10/2014 11:49:15
5008 (0x1390)
Loaded C:\Windows\system32\wimgapi.dll SMSPXE
20/10/2014 11:49:15 5008 (0x1390)
Opening image file D:\RemoteInstall\SMSImages\CAS00004\boot.CAS00004.wim
SMSPXE 20/10/2014 11:49:15
5008 (0x1390)
If anyone has any further info on this please can you let me know?
Thanks so much.
Katie

Hello,
Is your WDS running properly? If WDS is stopped, can you start it manually?
Or you get an error like 'The service did not respond in a timely fashion'?
The symptom is so similar to that I have encountered. You referred that you have tried to remove WDS, DP, but I wonder how. Before removing WDS and DP role, try to delete corrupt package in SCCMContentLib folder.
I just recreated SCCMContentLib, and WDS did start working. I guess there are corrupt packages in the my folder as well. But another problem occur, I installed all the roles on the same server in my lab, so it is a primary site server as well. As a result,
it seems that I have to re-deploy all the packages. Not sure if there is any further problem yet. Since it is just a lab environment, it doesn't matter for me.
I hope what I have done will give you some clue.

Critical SMS_NOTIFICATION_SERVER ERROR sccm 2012 R2 WITH SQL 2012 SP1

Environement
SCCM 2012 R2
SQL 2012 SP1
On the same server
In sccm console i have in Monitoring - System Status - Component Status
critical SMS_NOTIFICATION_SERVER ERROR
Here are the two error that keep popping up
ERROR 1016
Site Component Manager failed to install this component on this site system.
Solution: Review the previous status messages to determine the exact reason for the failure. Site Component Manager will automatically retry the installation in 60 minutes. To force Site Component Manager to immediately retry the installation, stop and restart
Site Component Manager using the Configuration Manager Service Manager.
Folowing message
ERROR 4951
Site Component Manager failed to install this component, because the Microsoft Installer File for this component (bgbisapi.msi) could not install.
Refer to the BgbSetup.log, the bgbisapimsi.log, as well as the ConfigMgr Documentation and the Microsoft Knowledge Base for further information.
Here are the 2 logs
bgbsetuplog
<02/28/14 09:00:53> ====================================================================
<02/28/14 09:00:53> SMSBGB Setup Started....
<02/28/14 09:00:53> Parameters: D:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /install /siteserver:TCI-SCCMR2-LAV SMSBGB 0
<02/28/14 09:00:53> Installing Pre Reqs for SMSBGB
<02/28/14 09:00:53>         ======== Installing Pre Reqs for Role SMSBGB ========
<02/28/14 09:00:53> Found 1 Pre Reqs for Role SMSBGB
<02/28/14 09:00:53> Pre Req SqlNativeClient found.
<02/28/14 09:00:53> SqlNativeClient already installed (Product Code: {D411E9C9-CE62-4DBF-9D92-4CB22B750ED5}). Would not install again.
<02/28/14 09:00:53> Pre Req SqlNativeClient is already installed. Skipping it.
<02/28/14 09:00:53>         ======== Completed Installation of Pre Reqs for Role SMSBGB ========
<02/28/14 09:00:53> Installing the SMSBGB
<02/28/14 09:00:53> Passed OS version check.
<02/28/14 09:00:53> IIS Service is installed.
<02/28/14 09:00:53> SMSBGB already installed (Product Code: {A78E8003-2307-4B70-B7CD-1A07C0A31D21}). Upgrading/Reinstalling SMSBGB
<02/28/14 09:00:53> New SMSBGB is the same product code. This is a minor upgrade.
<02/28/14 09:00:53> Enabling MSI logging. bgbisapi.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\bgbisapiMSI.log
<02/28/14 09:00:53> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi REINSTALL=ALL REINSTALLMODE=vmaus CCMINSTALLDIR="D:\Program Files\SMS_CCM" CCMSERVERDATAROOT="D:\Program Files\Microsoft Configuration
Manager" USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<02/28/14 09:01:01> bgbisapi.msi exited with return code: 0
<02/28/14 09:01:01> Installation was successful.
<02/28/14 09:01:01> CTool::RegisterComPlusService: run command line: "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\RegSvcs.exe" /u "D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll"
<02/28/14 09:01:04> CTool::RegisterComPlusService: Failed to unregister D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll with .Net Fx 4.0
<02/28/14 09:01:04> CTool::RegisterComPlusService: run command line: "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\RegSvcs.exe" /extlb /tlb:"D:\Program Files\SMS_CCM\microsoft.configurationmanager.bgbserverchannel.tlb" "D:\Program
Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll"
<02/28/14 09:01:07> CTool::RegisterComPlusService: Failed to register D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll with .Net Fx 4.0
<02/28/14 09:01:07> Cannot register BGB server channel DLL D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll. Installation cannot continue.
<02/28/14 09:01:07> Fatal MSI Error - bgbisapi.msi could not be install
bgpisapi.log
MSI (s) (00:60) [09:01:01:660]: Product: BGB http proxy -- Configuration completed successfully.
MSI (s) (00:60) [09:01:01:661]: Windows Installer reconfigured the product. Product Name: BGB http proxy. Product Version: 5.00.7958.1000. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error status: 0.
MSI (s) (00:60) [09:01:01:665]: Deferring clean up of packages/files, if any exist
MSI (s) (00:60) [09:01:01:665]: MainEngineThread is returning 0
MSI (s) (00:04) [09:01:01:670]: RESTART MANAGER: Session closed.
MSI (s) (00:04) [09:01:01:670]: No System Restore sequence number for this installation.
=== Logging stopped: 2/28/2014 9:01:01 ===
MSI (s) (00:04) [09:01:01:674]: User policy value 'DisableRollback' is 0
MSI (s) (00:04) [09:01:01:674]: Machine policy value 'DisableRollback' is 0
MSI (s) (00:04) [09:01:01:674]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (00:04) [09:01:01:675]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (00:04) [09:01:01:677]: Note: 1: 2265 2: 3: -2147287035
MSI (s) (00:04) [09:01:01:678]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (00:04) [09:01:01:678]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (00:04) [09:01:01:679]: Destroying RemoteAPI object.
MSI (s) (00:B8) [09:01:01:679]: Custom Action Manager thread ending.
MSI (c) (3C:B8) [09:01:01:686]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (3C:B8) [09:01:01:686]: MainEngineThread is returning 0
MSI (c) (3C:B0) [09:01:01:690]: RESTART MANAGER: Session closed.
=== Verbose logging stopped: 2/28/2014 9:01:01 ===

Problem not fixed SORRY GUY'S
Environement
1 SERVER
WINDOWS SERVER 2012 R2
SQL SERVER 2012 SP1
SCCM 2012 R2
ERROR in system center
Message ID 1016
Site Component Manager failed to install this component on this site system.
Solution: Review the previous status messages to determine the exact reason for the failure. Site Component Manager will automatically retry the installation in 60 minutes. To force Site Component Manager to immediately retry the installation, stop and restart
Site Component Manager using the Configuration Manager Service Manager.
Message ID
4951
Site Component Manager failed to install this component, because the Microsoft Installer File for this component (bgbisapi.msi) could not install.
Refer to the BgbSetup.log, the bgbisapimsi.log, as well as the ConfigMgr Documentation and the Microsoft Knowledge Base for further information.
BGPSETUP.LOG
<03/05/14 09:49:33> ====================================================================
<03/05/14 09:49:33> SMSBGB Setup Started....
<03/05/14 09:49:33> Parameters: D:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /install /siteserver:TCI-SCCMR2-LAV SMSBGB 0
<03/05/14 09:49:33> Installing Pre Reqs for SMSBGB
<03/05/14 09:49:33>         ======== Installing Pre Reqs for Role SMSBGB ========
<03/05/14 09:49:33> Found 1 Pre Reqs for Role SMSBGB
<03/05/14 09:49:33> Pre Req SqlNativeClient found.
<03/05/14 09:49:33> SqlNativeClient already installed (Product Code: {D411E9C9-CE62-4DBF-9D92-4CB22B750ED5}). Would not install again.
<03/05/14 09:49:33> Pre Req SqlNativeClient is already installed. Skipping it.
<03/05/14 09:49:33>         ======== Completed Installation of Pre Reqs for Role SMSBGB ========
<03/05/14 09:49:33> Installing the SMSBGB
<03/05/14 09:49:33> Passed OS version check.
<03/05/14 09:49:33> IIS Service is installed.
<03/05/14 09:49:33> SMSBGB already installed (Product Code: {A78E8003-2307-4B70-B7CD-1A07C0A31D21}). Upgrading/Reinstalling SMSBGB
<03/05/14 09:49:33> New SMSBGB is the same product code. This is a minor upgrade.
<03/05/14 09:49:33> Enabling MSI logging. bgbisapi.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\bgbisapiMSI.log
<03/05/14 09:49:33> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi REINSTALL=ALL REINSTALLMODE=vmaus CCMINSTALLDIR="D:\Program Files\SMS_CCM" CCMSERVERDATAROOT="D:\Program Files\Microsoft Configuration
Manager" USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<03/05/14 09:49:41> bgbisapi.msi exited with return code: 0
<03/05/14 09:49:41> Installation was successful.
<03/05/14 09:49:41> CTool::RegisterComPlusService: run command line: "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\RegSvcs.exe" /u "D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll"
<03/05/14 09:49:43> CTool::RegisterComPlusService: Failed to unregister D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll with .Net Fx 4.0
<03/05/14 09:49:43> CTool::RegisterComPlusService: run command line: "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\RegSvcs.exe" /extlb /tlb:"D:\Program Files\SMS_CCM\microsoft.configurationmanager.bgbserverchannel.tlb" "D:\Program
Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll"
<03/05/14 09:49:45> CTool::RegisterComPlusService: Failed to register D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll with .Net Fx 4.0
<03/05/14 09:49:45> Cannot register BGB server channel DLL D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll. Installation cannot continue.
<03/05/14 09:49:45> Fatal MSI Error - bgbisapi.msi could not be installed.
<03/05/14 09:49:45> ~RoleSetup().
BGBISAPI.LOG
=== Verbose logging started: 3/5/2014 9:49:33 Build type: SHIP UNICODE 5.00.9600.00 Calling process: D:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe ===
MSI (c) (08:C0) [09:49:33:974]: Resetting cached policy values
MSI (c) (08:C0) [09:49:33:974]: Machine policy value 'Debug' is 0
MSI (c) (08:C0) [09:49:33:974]: ******* RunEngine:
           ******* Product: D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi
           ******* Action:
           ******* CommandLine: **********
MSI (c) (08:C0) [09:49:33:974]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (08:C0) [09:49:33:974]: Grabbed execution mutex.
MSI (c) (08:C0) [09:49:34:021]: Cloaking enabled.
MSI (c) (08:C0) [09:49:34:021]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (08:C0) [09:49:34:025]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (C4:E4) [09:49:34:039]: Running installation inside multi-package transaction D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi
MSI (s) (C4:E4) [09:49:34:039]: Grabbed execution mutex.
MSI (s) (C4:E8) [09:49:34:045]: Resetting cached policy values
MSI (s) (C4:E8) [09:49:34:045]: Machine policy value 'Debug' is 0
MSI (s) (C4:E8) [09:49:34:045]: ******* RunEngine:
           ******* Product: D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi
           ******* Action:
           ******* CommandLine: **********
MSI (s) (C4:E8) [09:49:34:047]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (C4:E8) [09:49:34:053]: Note: 1: 2203 2: C:\Windows\Installer\inprogressinstallinfo.ipi 3: -2147287038
MSI (s) (C4:E8) [09:49:34:057]: SRSetRestorePoint skipped for this transaction.
MSI (s) (C4:E8) [09:49:34:058]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer 3: 2
MSI (s) (C4:E8) [09:49:34:060]: File will have security applied from OpCode.
MSI (s) (C4:E8) [09:49:34:065]: SOFTWARE RESTRICTION POLICY: Verifying package --> 'D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi' against software restriction policy
MSI (s) (C4:E8) [09:49:34:065]: SOFTWARE RESTRICTION POLICY: D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi has a digital signature
MSI (s) (C4:E8) [09:49:34:067]: SOFTWARE RESTRICTION POLICY: D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi is permitted to run because the user token authorizes execution (system or service token).
MSI (s) (C4:E8) [09:49:34:067]: MSCOREE not loaded loading copy from system32
MSI (s) (C4:E8) [09:49:34:077]: End dialog not enabled
MSI (s) (C4:E8) [09:49:34:077]: Original package ==> D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi
MSI (s) (C4:E8) [09:49:34:077]: Package we're running from ==> C:\Windows\Installer\3897f9.msi
MSI (s) (C4:E8) [09:49:34:080]: APPCOMPAT: Uninstall Flags override found.
MSI (s) (C4:E8) [09:49:34:080]: APPCOMPAT: Uninstall VersionNT override found.
MSI (s) (C4:E8) [09:49:34:080]: APPCOMPAT: Uninstall ServicePackLevel override found.
MSI (s) (C4:E8) [09:49:34:081]: APPCOMPAT: looking for appcompat database entry with ProductCode '{A78E8003-2307-4B70-B7CD-1A07C0A31D21}'.
MSI (s) (C4:E8) [09:49:34:081]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (C4:E8) [09:49:34:094]: Note: 1: 2262 2: MsiFileHash 3: -2147287038
MSI (s) (C4:E8) [09:49:34:094]: Machine policy value 'DisablePatch' is 0
MSI (s) (C4:E8) [09:49:34:094]: Machine policy value 'AllowLockdownPatch' is 0
MSI (s) (C4:E8) [09:49:34:094]: Machine policy value 'DisableLUAPatching' is 0
MSI (s) (C4:E8) [09:49:34:094]: Machine policy value 'DisableFlyWeightPatching' is 0
MSI (s) (C4:E8) [09:49:34:095]: APPCOMPAT: looking for appcompat database entry with ProductCode '{A78E8003-2307-4B70-B7CD-1A07C0A31D21}'.
MSI (s) (C4:E8) [09:49:34:095]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (C4:E8) [09:49:34:096]: Transforms are not secure.
MSI (s) (C4:E8) [09:49:34:096]: PROPERTY CHANGE: Adding MsiLogFileLocation property. Its value is 'D:\Program Files\Microsoft Configuration Manager\logs\bgbisapiMSI.log'.
MSI (s) (C4:E8) [09:49:34:096]: Command Line: REINSTALL=ALL REINSTALLMODE=vmaus CCMINSTALLDIR=D:\Program Files\SMS_CCM CCMSERVERDATAROOT=D:\Program Files\Microsoft Configuration Manager USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE
SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1 CURRENTDIRECTORY=D:\Program Files\Microsoft Configuration Manager\bin\x64 CLIENTUILEVEL=3 MSICLIENTUSESEXTERNALUI=1 CLIENTPROCESSID=5384
MSI (s) (C4:E8) [09:49:34:096]: Product Code passed to Engine.Initialize:           '{A78E8003-2307-4B70-B7CD-1A07C0A31D21}'
MSI (s) (C4:E8) [09:49:34:096]: Product Code from property table before transforms: '{A78E8003-2307-4B70-B7CD-1A07C0A31D21}'
MSI (s) (C4:E8) [09:49:34:096]: Product Code from property table after transforms: '{A78E8003-2307-4B70-B7CD-1A07C0A31D21}'
MSI (s) (C4:E8) [09:49:34:096]: Product registered: entering maintenance mode
MSI (s) (C4:E8) [09:49:34:096]: Determined that existing product (either this product or the product being upgraded with a patch) is installed per-machine.
MSI (s) (C4:E8) [09:49:34:096]: Product {A78E8003-2307-4B70-B7CD-1A07C0A31D21} is admin assigned: LocalSystem owns the publish key.
MSI (s) (C4:E8) [09:49:34:096]: Product {A78E8003-2307-4B70-B7CD-1A07C0A31D21} is managed.
MSI (s) (C4:E8) [09:49:34:096]: MSI_LUA: Credential prompt not required, user is an admin
MSI (s) (C4:E8) [09:49:34:096]: PROPERTY CHANGE: Adding ProductState property. Its value is '5'.
MSI (s) (C4:E8) [09:49:34:096]: PROPERTY CHANGE: Adding ProductToBeRegistered property. Its value is '1'.
MSI (s) (C4:E8) [09:49:34:096]: Entering CMsiConfigurationManager::SetLastUsedSource.
MSI (s) (C4:E8) [09:49:34:096]: Specifed source is already in a list.
MSI (s) (C4:E8) [09:49:34:096]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (C4:E8) [09:49:34:096]: Machine policy value 'DisableBrowse' is 0
MSI (s) (C4:E8) [09:49:34:096]: Machine policy value 'AllowLockdownBrowse' is 0
MSI (s) (C4:E8) [09:49:34:096]: Adding new sources is allowed.
MSI (s) (C4:E8) [09:49:34:097]: Package name retrieved from configuration data: 'bgbisapi.msi'
MSI (s) (C4:E8) [09:49:34:099]: Note: 1: 2262 2: AdminProperties 3: -2147287038
MSI (s) (C4:E8) [09:49:34:099]: Machine policy value 'DisableMsi' is 1
MSI (s) (C4:E8) [09:49:34:099]: Machine policy value 'AlwaysInstallElevated' is 0
MSI (s) (C4:E8) [09:49:34:099]: User policy value 'AlwaysInstallElevated' is 0
MSI (s) (C4:E8) [09:49:34:099]: Product {A78E8003-2307-4B70-B7CD-1A07C0A31D21} is admin assigned: LocalSystem owns the publish key.
MSI (s) (C4:E8) [09:49:34:099]: Product {A78E8003-2307-4B70-B7CD-1A07C0A31D21} is managed.
MSI (s) (C4:E8) [09:49:34:099]: Running product '{A78E8003-2307-4B70-B7CD-1A07C0A31D21}' with elevated privileges: Product is assigned.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding REINSTALL property. Its value is 'ALL'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding REINSTALLMODE property. Its value is 'vmaus'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding CCMINSTALLDIR property. Its value is 'D:\Program Files\SMS_CCM'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding CCMSERVERDATAROOT property. Its value is 'D:\Program Files\Microsoft Configuration Manager'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding USESMSPORTS property. Its value is 'TRUE'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding SMSPORTS property. Its value is '80'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding USESMSSSLPORTS property. Its value is 'TRUE'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding SMSSSLPORTS property. Its value is '443'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding USESMSSSL property. Its value is 'TRUE'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding SMSSSLSTATE property. Its value is '0'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding CCMENABLELOGGING property. Its value is 'TRUE'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding CCMLOGLEVEL property. Its value is '1'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding CCMLOGMAXSIZE property. Its value is '1000000'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding CCMLOGMAXHISTORY property. Its value is '1'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding CURRENTDIRECTORY property. Its value is 'D:\Program Files\Microsoft Configuration Manager\bin\x64'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding CLIENTUILEVEL property. Its value is '3'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding MSICLIENTUSESEXTERNALUI property. Its value is '1'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding CLIENTPROCESSID property. Its value is '5384'.
MSI (s) (C4:E8) [09:49:34:100]: Machine policy value 'DisableAutomaticApplicationShutdown' is 0
MSI (s) (C4:E8) [09:49:34:104]: PROPERTY CHANGE: Adding MsiRestartManagerSessionKey property. Its value is '1ea81ab83bbb7c48a58c04b46f112051'.
MSI (s) (C4:E8) [09:49:34:104]: RESTART MANAGER: Session opened.
MSI (s) (C4:E8) [09:49:34:104]: PROPERTY CHANGE: Adding MsiSystemRebootPending property. Its value is '1'.
MSI (s) (C4:E8) [09:49:34:104]: TRANSFORMS property is now:
MSI (s) (C4:E8) [09:49:34:104]: PROPERTY CHANGE: Adding PRODUCTLANGUAGE property. Its value is '1033'.
MSI (s) (C4:E8) [09:49:34:104]: PROPERTY CHANGE: Adding VersionDatabase property. Its value is '200'.
MSI (s) (C4:E8) [09:49:34:106]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming
MSI (s) (C4:E8) [09:49:34:106]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\Favorites
MSI (s) (C4:E8) [09:49:34:108]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Network Shortcuts
MSI (s) (C4:E8) [09:49:34:109]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\Documents
MSI (s) (C4:E8) [09:49:34:109]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Printer Shortcuts
MSI (s) (C4:E8) [09:49:34:110]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Recent
MSI (s) (C4:E8) [09:49:34:111]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\SendTo
MSI (s) (C4:E8) [09:49:34:111]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Templates
MSI (s) (C4:E8) [09:49:34:111]: SHELL32::SHGetFolderPath returned: C:\ProgramData
MSI (s) (C4:E8) [09:49:34:112]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Local
MSI (s) (C4:E8) [09:49:34:114]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\Pictures
MSI (s) (C4:E8) [09:49:34:124]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools
MSI (s) (C4:E8) [09:49:34:128]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
MSI (s) (C4:E8) [09:49:34:129]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs
MSI (s) (C4:E8) [09:49:34:131]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
MSI (s) (C4:E8) [09:49:34:132]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
MSI (s) (C4:E8) [09:49:34:135]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Administrative Tools
MSI (s) (C4:E8) [09:49:34:137]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
MSI (s) (C4:E8) [09:49:34:138]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
MSI (s) (C4:E8) [09:49:34:139]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Start Menu
MSI (s) (C4:E8) [09:49:34:141]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\Desktop
MSI (s) (C4:E8) [09:49:34:144]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Templates
MSI (s) (C4:E8) [09:49:34:144]: SHELL32::SHGetFolderPath returned: C:\Windows\Fonts
MSI (s) (C4:E8) [09:49:34:144]: Note: 1: 2898 2: MS Sans Serif 3: MS Sans Serif 4: 0 5: 16
MSI (s) (C4:E8) [09:49:34:156]: MSI_LUA: Setting AdminUser property to 1 because the product is already installed managed and per-machine
MSI (s) (C4:E8) [09:49:34:156]: MSI_LUA: Setting MsiRunningElevated property to 1 because the install is already running elevated.
MSI (s) (C4:E8) [09:49:34:156]: PROPERTY CHANGE: Adding MsiRunningElevated property. Its value is '1'.
MSI (s) (C4:E8) [09:49:34:156]: PROPERTY CHANGE: Adding Privileged property. Its value is '1'.
MSI (s) (C4:E8) [09:49:34:156]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
MSI (s) (C4:E8) [09:49:34:156]: PROPERTY CHANGE: Adding USERNAME property. Its value is 'Windows User'.
MSI (s) (C4:E8) [09:49:34:156]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
MSI (s) (C4:E8) [09:49:34:156]: PROPERTY CHANGE: Adding Installed property. Its value is '00:00:00'.
MSI (s) (C4:E8) [09:49:34:156]: PROPERTY CHANGE: Adding DATABASE property. Its value is 'C:\Windows\Installer\3897f9.msi'.
MSI (s) (C4:E8) [09:49:34:156]: PROPERTY CHANGE: Adding OriginalDatabase property. Its value is 'D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi'.
MSI (s) (C4:E8) [09:49:34:156]: Machine policy value 'MsiDisableEmbeddedUI' is 0
MSI (s) (C4:E8) [09:49:34:156]: EEUI - Disabling MsiEmbeddedUI due to existing external or embedded UI
MSI (s) (C4:E8) [09:49:34:156]: EEUI - Disabling MsiEmbeddedUI for service because it's not a quiet/basic install
MSI (s) (C4:E8) [09:49:34:159]: Note: 1: 2205 2: 3: PatchPackage
MSI (s) (C4:E8) [09:49:34:159]: Machine policy value 'DisableRollback' is 0
MSI (s) (C4:E8) [09:49:34:159]: User policy value 'DisableRollback' is 0
MSI (s) (C4:E8) [09:49:34:159]: PROPERTY CHANGE: Adding UILevel property. Its value is '2'.
MSI (s) (C4:E8) [09:49:34:159]: PROPERTY CHANGE: Adding QFEUpgrade property. Its value is '1'.
=== Logging started: 3/5/2014 9:49:34 ===
MSI (s) (C4:E8) [09:49:34:161]: Note: 1: 2203 2: C:\Windows\Installer\inprogressinstallinfo.ipi 3: -2147287038
MSI (s) (C4:E8) [09:49:34:161]: PROPERTY CHANGE: Adding Preselected property. Its value is '1'.
MSI (s) (C4:E8) [09:49:34:161]: APPCOMPAT: [DetectVersionLaunchCondition] Launch condition already passes.
MSI (s) (C4:E8) [09:49:34:163]: PROPERTY CHANGE: Adding ACTION property. Its value is 'INSTALL'.
MSI (s) (C4:E8) [09:49:34:163]: Doing action: INSTALL
Action start 9:49:34: INSTALL.
MSI (s) (C4:E8) [09:49:34:165]: Running ExecuteSequence
MSI (s) (C4:E8) [09:49:34:165]: Doing action: SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61
MSI (s) (C4:E8) [09:49:34:166]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61'
MSI (s) (C4:E8) [09:49:34:167]: PROPERTY CHANGE: Adding SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61 property. Its value is 'C:\Windows\SysWOW64\'.
Action start 9:49:34: SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61.
MSI (s) (C4:E8) [09:49:34:167]: Doing action: System64Folder.F65FD590_5BEA_48BE_8408_26F7244E8B61
Action ended 9:49:34: SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61. Return value 1.
MSI (s) (C4:E8) [09:49:34:169]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'System64Folder.F65FD590_5BEA_48BE_8408_26F7244E8B61'
MSI

Help with Linking A Report in SCCM 2012

I've got a report that shows us Flash Players Versions by Count. I'd like to be able to create a linked report that shows the specific computers that have a specific version. The current report looks like this
I'd like to be able to click on a link in the Version column that would display the result of this somehow.
Are any SCCM 2012 reporting gurus out there that have done something like this?
For example, I'd like a link from the Version field to run a report that
Orange County District Attorney

My first recommendation is to adjust the query you are currently using as it will only show you x86 software titles.
As for how to do it, that is easy (sort of). Write your two reports,Make sure that your second report have prompts of everything that you want to pass to it.
Now are you sign BIDS or RP to create your reports? You need to know this as it is a lot harder to do this with RB vs BIDS.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Missing reports in SCCM 2012

Hi
I have problem with Reports in SCCM Console, it missing ..
I have done following;
I have add myself in permission in the website
http://SQLSERVERNAME/Reports as roles
Browser
ConfigMgr Report Administrators
ConfigMgr Report Users
Content Manager
My Reports
Publisher
Report Builder
I have also add the Role, Reporting Service Point.
The Reporting Services Configuration Manager is joined to my database ReportServer. The database is native and log-in as Windows Account, my admin account.
There is more I can checked ?
-- Sokoban3 --

Hi
I have created AD Acount, ReportsUser with Administrative rights and add all permission in http://reportserver/Reports.
I got same error, Could
not retrieve the reporting service name for instance "MSSQLSERVER"
Maybe is the problem to get contact to SQL Server?
I don't understand what /ReportServer
is... ??
//Sokoban3

Software center permissions error, SCCM 2012

I'm getting a strange error in the software center. The applications and packages deploy without any problems but users receive an error when trying to install the application or package through software center. They receive the error "Insufficient
Permissions for Software Installation" and "Your IT department has set restrictions for this software that prevent it from installing on your computer". I have attached the screenshot. We are running SCCM 2012 on Server 2008 R2 with SQL Server
2008 R2 on a separate server. If this is something that is configured on the server I don't remember ever doing it but I can't find that error anywhere on Google so I'm kind of at a loss for the moment. Again, any help is greatly appreciated. Thanks.
Über Random

Oddly encountering this error as well on an HP MT41 with EWF turned on. Under the local Administrator account.
Installs are set to "All Users".
SCCM 2012r2 CU3 Environment.
This is my SCNotify and SCClient Log exerpts
SCNotify
Executing WMI query: Select * From CCM_ClientAgentSettings (Microsoft.SoftwareCenter.Client.Data.WmiConnectionManager at ExecuteQuery)
SCClient 12/31/2014 11:58:05 AM 1 (0x0001)
SCClient
DialogBase base constructor called for Microsoft.SoftwareCenter.Client.Pages.BasicMessageDialog, isNotify = False (Microsoft.SoftwareCenter.Client.Pages.DialogBase at .ctor)
SCClient 12/31/2014 11:58:45 AM 1 (0x0001)
Executing WMI query: Select * From CCM_ClientAgentSettings (Microsoft.SoftwareCenter.Client.Data.WmiConnectionManager at ExecuteQuery)
SCClient 12/31/2014 11:58:45 AM 1 (0x0001)
BasicMessageDialog: displaying to user = Insufficient Permissions For Software Installation (Microsoft.SoftwareCenter.Client.Pages.BasicMessageDialog at .ctor)
SCClient 12/31/2014 11:58:45 AM 1 (0x0001)
BasicMessageDialog: user clicked ok (Microsoft.SoftwareCenter.Client.Pages.BasicMessageDialog at ButtonOK_Click)
SCClient 12/31/2014 12:00:03 PM 1 (0x0001)
So, from that, I took I should look in WMI, here is the contents of the properties of CCM_ClientAgentSettings.
ROOT\CCM\ClientSDK\CCM_ClientAgentSettings
=====================================
COMPUTER : MyTestUnit
CLASS : CCM_ClientAgentSettings
=====================================
BrandingTitle : MyCompanyNameHere, INC
DayReminderInterval : 7200
DisplayNewProgramNotification : True
EnableThirdPartyOrchestration : 0
HourReminderInterval : 900
InstallRestriction : 0
OSDBrandingSubtitle :
ReminderInterval : 28800
SUMBrandingSubtitle :
SuspendBitLocker : 0
SWDBarndingSubtitle :
SystemRestartTurnaroundTime : 600
Thoughts?
EDIT: Found this in the SCCM Documentation Library doc file (Feb 1, 2013).
Why do I see an error message about insufficient permissions from a Windows Embedded device when I try to install software from Software Center?
You can install applications only when the write filter on the Windows Embedded device is disabled. If you try to install an application on a Windows Embedded device that has write filters enabled, you see an error message that you have insufficient
permissions to install the application and the installation fails.

Software Update error - SCCM 2012 SP1

HI,
I have SCCM 2012 SP1 installed on Windows server 2008 R2 server. I have configured SUP role and tried sync from sccm console. I get the below error.
LOg:
WSUS sync running~ $$<SMS_WSUS_CONFIGURATION_MANAGER><01-30-2014 14:11:42.047+00><thread=3840 (0xF00)>
WSUS sync running~ $$<SMS_WSUS_CONFIGURATION_MANAGER><01-30-2014 14:12:42.255+00><thread=3840 (0xF00)>
Microsoft.SystemsManagementServer.WSUS.WSUSMSPException: WSUS sync failed with UssCommunicationError: ~~ at Microsoft.SystemsManagementServer.WSUS.WSUSServer.IsSyncRunning() $$<SMS_WSUS_CONFIGURATION_MANAGER><01-30-2014 14:13:12.462+00><thread=3840
(0xF00)>
Done using DEVSWAD\SWDTR-SRV-CMPATCH credentials~ $$<SMS_WSUS_CONFIGURATION_MANAGER><01-30-2014 14:13:12.478+00><thread=3840 (0xF00)>
Failed to set Subscriptions on the WSUS
. Error:(-2146233088)Unknown error 0x80131500~ $$<SMS_WSUS_CONFIGURATION_MANAGER><01-30-2014 14:13:12.478+00><thread=3840 (0xF00)>
STATMSG: ID=6603 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=DCMPSTPV01.devswad.net SITE=SCW PID=2764 TID=3840 GMTDATE=Thu Jan 30 14:13:12.479 2014
I have configured proper proxy account which can connect to microsoft website and the port i have configured in proxy to allow is
80 and 443. I feel the port i need to allow may be i am not sure 8530 and 8531. Or 80 and 443 is fine. Please help
Regards, Pratap

It says to check WCM.log which i posted above
wsync log:
Sync failed: WSUS update source not found on site SCW. Please refer to WCM.log for configuration error details.. Source: getSiteUpdateSource $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 14:02:14.118+00><thread=4388 (0x1124)>
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=DCMPSTPV01.devswad.net SITE=SCW PID=2764 TID=4388 GMTDATE=Fri Jan 31 14:02:14.119 2014 ISTR0="getSiteUpdateSource" ISTR1="WSUS update source not found on site SCW. Please
refer to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 14:02:14.122+00><thread=4388 (0x1124)>
Sync failed. Will retry in 60 minutes $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 14:02:14.122+00><thread=4388 (0x1124)>
Setting sync alert to active state on site SCW $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 14:02:14.123+00><thread=4388 (0x1124)>
Sync time: 0d00h00m00s $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 14:02:14.132+00><thread=4388 (0x1124)>
Wakeup for a polling cycle $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:14.495+00><thread=4388 (0x1124)>
Starting Sync $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.157+00><thread=4388 (0x1124)>
Performing sync on retry schedule $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.163+00><thread=4388 (0x1124)>
Read SUPs from SCF for DCMPSTPV01.devswad.net $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.577+00><thread=4388 (0x1124)>
Found 1 SUPs $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.830+00><thread=4388 (0x1124)>
Found active SUP DCMPSTPV01.devswad.net from SCF File.~ $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.833+00><thread=4388 (0x1124)>
Sync failed: WSUS update source not found on site SCW. Please refer to WCM.log for configuration error details.. Source: getSiteUpdateSource $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.876+00><thread=4388 (0x1124)>
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=DCMPSTPV01.devswad.net SITE=SCW PID=2764 TID=4388 GMTDATE=Fri Jan 31 15:02:15.882 2014 ISTR0="getSiteUpdateSource" ISTR1="WSUS update source not found on site SCW. Please refer
to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.892+00><thread=4388 (0x1124)>
Sync failed. Will retry in 60 minutes $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.912+00><thread=4388 (0x1124)>
Setting sync alert to active state on site SCW $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.915+00><thread=4388 (0x1124)>
Sync time: 0d00h00m01s $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:17.024+00><thread=4388 (0x1124)>
Next scheduled sync is a retry sync at 31/01/2014 16:02:15 $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:17.151+00><thread=4388 (0x1124)>
Regards, Pratap

Report error SCCM 2012 R2

Similar Messages

Maybe you are looking for