Report execution in batch mode

I am using Oracle reports 6.0 for Unix.
When I am executing report which is 132 columns through rwrun60 the report file created in two lines.
The first line has 1 to 80 and second line is from 81 to 132.
How do I get 132 columns in one line.
TIA,
Raj

Murthy,
you need to get the job_id of teh Run_Report_Object() call and setup a timer that fires frequently. Within the timer, check for teh job status and you will get more than ENQUEUED, which is the first status for all Reports.
Frank

Similar Messages

Report Compilation through batch mode

Hi There,
Could you please guide me how to do the 9i Report Compilation in batch mode.
I need to compile 40-50 reports at one time on each server.
We are using IBM-AIX, Win NT, and Solaris OS
Thanks

Hi,
You could look up Note 191529.1 in Metalink
http://metalink.oracle.com
Navneet.

How to run a 10g report in quiet\batch mode

Good Afternoon,
Please advise if there is a way to run a 10g report from command line.
We use 6i right now and our job scheduler runs reports using "D:\ORADEV6I\BIN\RWRUN60.EXE ..." executable in batch mode on a separate server. We plan to migrate to 10g Database, Forms, Reports. Is there a way to keep this functionality and create a "command" to request the report server to run a report?
Thank you,
Dmitri

So the server (we will call it server1) you have "Redwood Cronacle 6.0.2" installed on has a C: drive and a D: drive. On the D: drive is installed Developer 6i (D:\ORADEV6I). You can install Developer Suite 10g also on the D: drive (D:\ORADEV10G for example). After that, setup Oracle iAS on server2. The good news is you have to change very little code. You can:
Not use the iAS server at all and use the following command (similar to how you are doing it now) in Redwood:
return 'D:\ORADEV10G\BIN\RWRUN.EXE'
||' userid=:USRPWD'
||' module='
||v_path||'\'||p_module
||' batch=yes paramform=no destype=file'
||' desformat=' || v_printer_driver
||' desname=:OUTFILE'
||' cmdfile=:CMDFILE errfile=:LOGFILE';If you want to use the iAS server, you have to consider where the report will physicall exist. You can have it exist on the reports server or you can have it brought back to the client. If you bring it back to the client you will lose the ability to run this asynchronously (or in batch mode). You will have to play with some of these parameters to get it to work perfectly, but this should be a good start. These are examples of have the report results saved locally on server1...not server2:
1. Use rwclient to submit a report request
return 'D:\ORADEV10G\BIN\RWCLIENT.EXE'
||' userid=:USRPWD'
||' module='
||v_path||'\'||p_module
||' paramform=no destype=localfile'
||' desformat=' || v_printer_driver
||' desname=:OUTFILE'
||' cmdfile=:CMDFILE errfile=:LOGFILE'
||' server=server2';2. Use rwservlet to submit a report request
return 'D:\ORADEV10G\BIN\RWSERVLET.EXE'
||' userid=:USRPWD'
||' module='
||v_path||'\'||p_module
||' paramform=no destype=localfile'
||' desformat=' || v_printer_driver
||' desname=:OUTFILE'
||' cmdfile=:CMDFILE errfile=:LOGFILE'
||' server=server2';I would think that Cronacle 6.0.2 can submit a url as a job and wait for the results to be streamed back, so you could look into doing that also, in which case the url you would submit for the job would be something like:
return 'http://server2:7777/reports/rwservlet?'
||' userid=:USRPWD'
||' module='
||v_path||'\'||p_module
||' paramform=no destype=cache'
||' desformat=' || v_printer_driver
||' desname=:OUTFILE'
||' cmdfile=:CMDFILE errfile=:LOGFILE'
||' server=server2';

Running a crystal report xi in batch mode (C# runs a crystal report xi in batch mode)

<p>Does anyone know if it is possible in a C# program to submit a Crystal Report XI? </p><p>Our design is to use C# front end to prompt the user for the parameters for the report. These parameters would be stored in a table. At night the C# program would wake up and based on the parameters, the C# program would submit the crystal report to run.</p>

hi..
am using .net version 2005 and crystalreports version 9.0
i pass value from crystalreportviewer page to crystal reports design page using parameter fields but they take only first row data only...
i want to display dynamic values .. values are passed correcltly but not displayed... all fields dispalyed same value from database first row..
is there any solutions .. please reply me..
my mail id: [email protected]

Running reports 10g in batch mode in a remote server

Hi all
I have 10g AS and reports servives running in server1. I want to invoke some reports deployed in server1 from another server (server2) and create the output files (PDFs) in server 2.
Is this possible?
Any help is appreciated.

Use the thin client on server2:
http://www.oracle.com/technology/products/reports/htdocs/getstart/examples/Tools/thinclient/thinclient/Readme.html
To put the output on server2 you either have to map a drive to server2 on server1 or ftp the output from server1 to server2.
http://www.oracle.com/technology/products/reports/htdocs/faq/faq_deployment.htm#55

Compile Reports in batch mode

Hi
I finished forms compilation in batch mode forgot to ask about reports part.
I want to compile all my reports3.0 to reports 10g in batch mode by executing a batch file, please post the script for the same
Thanks

Script for batch compilation of reports in LINUX
This has all
Change the name of reports executable for reports 3 and 10g
Cheers
Priya

Forms 6i in Batch Mode - I need help..

Hello ALL.
Before I proceed migrating our 4.5 to 6i, I would like to know
how to run forms/reports 6i in batch mode. I have RDBMS 8.1.6.
running on HP-UX 11.0 and the plan is to deploy the
forms/reports6i to browser or intranet via the OAS9i/NT Server -
already installed. Currently, 60% of our applications are in
batch mode and 70% of our reports are in character mode and I
use a script to run them. Batch job example:
echo 'Job Myjob"
sqlplus -s @cretables
f45run myform term=vt220
r25run myreport paramform=NO batch=yes desttype=file
desname=myrep.lis indate=10222001
np -qhp2564 *lis <--- HP Line Printer
How do I run the above batch job using the OAS9i/NT Server?
Whar are my options? Can somebody show in me in detail/script
how to run the "example" batch job with forms 6i and reports
6i. Also, I need a detail instruction/script how to print the
reports in character mode using a local printer such line
printer.
My enourmous thank you to all of you.
Myrna Diaz
[email protected]

There is no other way.
Sorry

Compilation in batch mode

Hi
I finished forms compilation in batch mode. I want to compile all my reports3.0 to reports 10g in batch mode by executing a batch file, please post the script for the same
Thanks

Hello,
The executable rwconverter in ORACLE_HOME/bin allow to compile the RDF into REP.
Batch Compile Script for Forms, Reports, Libraries, Menus and also converting Binary to text and back (Doc ID 191529.1)
Regards

RE: Reporting after many forte tasks run in batch mode?

Actually, if you're looking for MAKEAPPDISTRIB (I assume that's how you
create distributable) you can see if the command was succesfull or not.
<<deployrep.js>> This Jscript will look for this string and it will
generate a report based on the next line in the log file.
The script assumes you have an environment variable (DESCARTES_ROOT) that
points to a folder (let's say "D:\TEST"). Under that folder you have a log
folder ("d:\test\log") which holds the deploy.log log file. You can easily
change the script to reflect your systems settings.
The generated report looks like that : <<deployrep.txt>>
Norocel Popa
Forte SysEng
(519)746-8110 x 2292
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Tuesday, March 16, 1999 11:58 AM
To: Forte-Users (Adresse de messagerie)
Subject: Reporting after many forte tasks run in batch mode ?
Hi,
I would like to know if overnight builds went okay, and therefore need to
parse the log(s).
The issue is that I don't have a proper string to look for (i.e. for
grep).
If I consider 'ERROR", then the following message won't be understandable.
There might a way to cheat with the indentation (i.e. the lines with only
two first blank chars)..
Has anyone experimented such a need ?
J-Paul Gabrielli
DTS
SYSTEM ERROR: Service object MySuperApplicationServer.MySuperMgrSO has
not been partitioned. Therefore, you cannot move it to an existing
partition.
Class: qqsp_UsageException
Error #: [1602, 606]
Detected at: qqcf_StandardConfig::MoveServiceObject at 3
Error Time: Tue Mar 16 17:39:26
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = B84E6180-D639-11D2-82F2-1863030AAA77:0x244:0x1,
taskId =
[B84E6180-D639-11D2-82F2-1863030AAA77:0x244:0x1.1]) in application
"fscript", pid 22713 on node rambo in environment SuperEnv.

Hi,
To trap error message from Forte log, I usually do this
egrep '(EXCEPTION|Exception|exception|ERROR|Error|error)' filename
This takes a regular expression to 'egrep' all occurrences of "exception" or
"error" not matter they are in upper case or lower case.
Hope this help.
Regards,
Peter Sham.
-----Original Message-----
From: [email protected] [SMTP:[email protected]]
Sent: Wednesday, March 17, 1999 12:58 AM
To: Forte-Users (Adresse de messagerie)
Subject: Reporting after many forte tasks run in
batch mode ?
Hi,
I would like to know if overnight builds went okay, and
therefore need to parse the log(s).
The issue is that I don't have a proper string to look for
(i.e. for grep).
If I consider 'ERROR", then the following message won't be
understandable.
There might a way to cheat with the indentation (i.e. the
lines with only two first blank chars)..
Has anyone experimented such a need ?
J-Paul Gabrielli
DTS
SYSTEM ERROR: Service object
MySuperApplicationServer.MySuperMgrSO has
not been partitioned. Therefore, you cannot move it to an
existing partition.
Class: qqsp_UsageException
Error #: [1602, 606]
Detected at: qqcf_StandardConfig::MoveServiceObject at 3
Error Time: Tue Mar 16 17:39:26
Exception occurred (locally) on partition
"Fscript_cl9_Client",
(partitionId =
B84E6180-D639-11D2-82F2-1863030AAA77:0x244:0x1, taskId =
[B84E6180-D639-11D2-82F2-1863030AAA77:0x244:0x1.1]) in
application
"fscript", pid 22713 on node rambo in environment
SuperEnv.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

How to run a 10g report in batch mode.

Good Afternoon,
Please advise if there is a way to run a 10g report from command line.
We use 6i right now and our job scheduler runs reports using "D:\ORADEV6I\BIN\RWRUN60.EXE ..." executable in batch mode on a separate server. We plan to migrate to 10g Database, Forms, Reports. Is there a way to keep this functionality and create a "command" to request the report server to run a report?
Thank you,
Dmitri

For those of you interested in following this refer to the same thread in the Reports Forum:
How to run a 10g report in quiet\batch mode

Multiple ALV reports not working in batch mode

All,
I have a report that creates a detail and a summary ALV report in one program.
When run in the foreground it works great - runs the ALV detail first and displays it and you arrow back and then the runs the ALV summary report and displays it.
But when run in the background - I get the ALV detail report sent to the spooler but nothing for the ALV summary report. Well I do get a second report sent to the spooler but it does not have any data displayed.
I ran this in debug mode - faking out the program to believe it was in Batch Mode.
Everything appears to look correct when it does the call to ALV - the outtab table has the summary data in it.
Here is the calls to ALV:
Function Module to display report in ALV List Format
IF l_detail = 'X'.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
        i_callback_program      = l_repid
        i_callback_user_command = c_ucomm
        i_grid_title            = p_title
        i_grid_settings         = w_alv_grid
        is_layout               = w_alv_layout
        it_fieldcat             = w_alv_field
        it_sort                 = w_alv_sort
        i_default               = 'X'
        i_save                  = ' '
        it_events               = w_alv_event
        is_print                = w_alv_print
      TABLES
        t_outtab                = t_detail
      EXCEPTIONS
        program_error           = 1
        OTHERS                  = 2.
ELSEIF l_summry = 'X'.
be sure th file has the new SNO values assigned B4 calling!
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
        i_callback_program      = l_repid
        i_callback_user_command = c_ucomm
        i_grid_title            = p_title
        i_grid_settings         = w_alv_grid
        is_layout               = w_alv_layout
        it_fieldcat             = w_alv_field
        it_sort                 = w_alv_sort
        i_default               = 'X'
        i_save                  = ' '
        it_events               = w_alv_event
        is_print                = w_alv_print
      TABLES
        t_outtab                = t_summry
      EXCEPTIONS
        program_error           = 1
        OTHERS                  = 2.
ENDIF.
Maybe there something I should be calling or clearing out in the above parms when trying to create to spoolfiles from ALV in background mode.
Any suggestions are most apprecaited.
Thanks.
Scott

before calling the ALV create a separate spool for each list.
if sy-batch = 'X'.
get the print parameters with FM GET_PRINT_RARAMETERS
pass the parameters (you can change them if you like) to
NEW-PAGE PRINT ON PARAMETERS your_parameters NO DIALOG
endif.

Running Reports 6 files in Batch mode in Portal 3.0

Hai,
I want to run reports 6 files from webdb. I want to give input parameter values to the reports and then shedul them to run in batch mode. I would be grateful if u explain me the steps in detail.
Thanks,
Mathan
null

Mathan,
Actually the Reports forum may be able to help you a little more than this forum can at this point.
Sue

Reporting after many forte tasks run in batch mode ?

Hi,
To trap error message from Forte log, I usually do this
egrep '(EXCEPTION|Exception|exception|ERROR|Error|error)' filename
This takes a regular expression to 'egrep' all occurrences of "exception" or
"error" not matter they are in upper case or lower case.
Hope this help.
Regards,
Peter Sham.
-----Original Message-----
From: [email protected] [SMTP:[email protected]]
Sent: Wednesday, March 17, 1999 12:58 AM
To: Forte-Users (Adresse de messagerie)
Subject: Reporting after many forte tasks run in
batch mode ?
Hi,
I would like to know if overnight builds went okay, and
therefore need to parse the log(s).
The issue is that I don't have a proper string to look for
(i.e. for grep).
If I consider 'ERROR", then the following message won't be
understandable.
There might a way to cheat with the indentation (i.e. the
lines with only two first blank chars)..
Has anyone experimented such a need ?
J-Paul Gabrielli
DTS
SYSTEM ERROR: Service object
MySuperApplicationServer.MySuperMgrSO has
not been partitioned. Therefore, you cannot move it to an
existing partition.
Class: qqsp_UsageException
Error #: [1602, 606]
Detected at: qqcf_StandardConfig::MoveServiceObject at 3
Error Time: Tue Mar 16 17:39:26
Exception occurred (locally) on partition
"Fscript_cl9_Client",
(partitionId =
B84E6180-D639-11D2-82F2-1863030AAA77:0x244:0x1, taskId =
[B84E6180-D639-11D2-82F2-1863030AAA77:0x244:0x1.1]) in
application
"fscript", pid 22713 on node rambo in environment
SuperEnv.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

Force FM execution on batch job work process

Hi!
Is it possible to asynchronously start FM execution on batch job work process?
Additions:
CALL FUNCTION func STARTING NEW TASK taskname.
CALL FUNCTION func IN BACKGROUND TASK.
starts FM execution just on another dialog process.
Context of requirement:
There is a program that may be logically splitted into two parts:
- dialog part where data is collected from user input
- BAPI call with a tons of parameters(structures, internal tables) formed on user input
So the problem - system dump by timeout during BAPI execution.
The only solution is to execute BAPI functionality on work process without timeout limitations - batch job work process.
There may be two approaches:
- pass parameters to report and schedule its execution in background job. But here arise question how to pass these dynamic parameters? SAP memory doesn't available for background job work process and "SUBMIT WITH FREE SELECTIONS texpr" seems to be intended for LDB or anyway not for such purposes.
- force FM execution on background job work process - so how if it possible?
Appreciate your suggestions.
Regards,
Maxim.

Hi Maxim,
Look at this example program where the user can run it online to enter the input values in the selection screen and then the program just goes into background mode, basically achieved by submitting the same program again skipping the selection screen. This is one more option for you.
REPORT ztest.
PARAMETERS: p_vbeln LIKE vbak-vbeln,
            p_bkrun NO-DISPLAY.
DATA: ls_vbak LIKE vbak.
DATA: v_answer,
      v_jobcount LIKE tbtcjob-jobcount.
IF p_bkrun IS INITIAL.
*-- not background processing
    CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
         EXPORTING
              textline1      = 'This may time out.'
              textline2      = 'Do you want to run in background?'
              titel          = 'Warning!!!'
              cancel_display = space
         IMPORTING
              answer         = v_answer.
    IF v_answer = 'J'.
*-- run in the background
      CALL FUNCTION 'JOB_OPEN'
           EXPORTING
                jobname          = 'ZTEST'
           IMPORTING
                jobcount         = v_jobcount
           EXCEPTIONS
                cant_create_job = 1
                invalid_job_data = 2
                jobname_missing = 3
                OTHERS           = 4.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE 'E' NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        EXIT.
      ENDIF.
*-- submit the program in the background
      SUBMIT ztest
        WITH p_bkrun = 'X'
        WITH p_vbeln = p_vbeln
        USER sy-uname
        VIA JOB 'ZTEST' NUMBER v_jobcount AND RETURN.
*-- close the job
      CALL FUNCTION 'JOB_CLOSE'
           EXPORTING
                jobcount             = v_jobcount
                jobname              = 'ZTEST'
                strtimmed            = 'X'
           EXCEPTIONS
                cant_start_immediate = 1
                invalid_startdate    = 2
                jobname_missing      = 3
                job_close_failed     = 4
                job_nosteps          = 5
                job_notex            = 6
                lock_failed          = 7
                OTHERS               = 8.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE 'W' NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      EXIT.
    ELSE.
      CLEAR v_answer.
    ENDIF.
ENDIF.
CHECK v_answer IS INITIAL.
SELECT SINGLE * FROM vbak
                  INTO ls_vbak
                 WHERE vbeln = p_vbeln.
IF sy-subrc <> 0.
    WRITE:/ 'Invalid Order Id.'.
ENDIF.
END-OF-SELECTION.
CHECK v_answer IS INITIAL.
IF p_bkrun IS INITIAL.
    WRITE:/ 'Here is the result running the program in foreground.'.
ELSE.
    WRITE:/ 'Here is the result running the program in background.'.
ENDIF.
WRITE:/ ls_vbak-vbeln,
          ls_vbak-vkorg.
Let me know if you have any questions.
Srinivas

Help needed in consuming BTQueryAUI query in batch mode

Hi Friends,
I am trying to consume BTQueryAUI in a custom function module. I have a requirement where in when i receive a external ref nbr, i need to update the status of crm service request to completed. We have already built logic to store the external nbr info in AET field on Service request and enhance inbox search to take give the results accordingly. now when i try to consume the query service with standard query parameters in batch mode..its not working..
REPORT ZTEST_CSOCRM.
DATA : ob_oref           TYPE REF TO zcl_im_z_badi_inbox_search,
C_ITEM_1O                TYPE CRMT_AUI_MAP_ITEM_TYPE VALUE 'ONEORDER',
   l_param1o_tab   TYPE crmt_name_value_pair_tab,
   is_name         type standard table of CRMT_NAME_VALUE_PAIR,
   wa_name         like line of is_name,
      l_sort_1o_tab   TYPE crmtt_aui_sorting,
       lv_result_1o TYPE REF TO cl_crm_bol_entity_col.
data QUERY_1O type ref to CL_CRM_BOL_QUERY_SERVICE.
CONSTANTS:
abap_true      TYPE abap_bool VALUE 'X',
abap_false     TYPE abap_bool VALUE ' '.
data: c_BTQueryAUI          TYPE crmt_ext_obj_name
                                    VALUE 'BTQueryAUI',
       c_query1o              TYPE crmt_ext_obj_name VALUE 'BTQueryAUI',
      ob_query                    TYPE REF TO
                                    cl_crm_bol_query_service,
ob_result                   TYPE REF TO if_bol_bo_col,
ob_core                     TYPE REF TO cl_crm_bol_core,
         lr_aui_dq        TYPE REF TO cl_crm_aui_advquery_service,
         lr_aui           type ref to cl_crm_aui_query_service.
wa_name-name = 'ASSIGNEDTYPE'.
wa_name-value = '0000'.
append wa_name to is_name.
wa_name-name = 'DATETYPE'.
wa_name-value = '0001'.
append wa_name to is_name.
wa_name-name = 'MAINCATEGORY'.
wa_name-value = 'ZBGW'.
append wa_name to is_name.
wa_name-name = 'SORTEDBY'.
wa_name-value = '0000'.
append wa_name to is_name.
wa_name-name = 'SORTEDBY2'.
wa_name-value = '0000'.
append wa_name to is_name.
wa_name-name = 'TIMEPERIOD'.
wa_name-value = '0000'.
append wa_name to is_name.
wa_name-name = 'ZZFLD000006'.
wa_name-value = '0000012345'.
append wa_name to is_name.
wa_name-name = 'DESCRIPTON'.
wa_name-value = '*test*'.
append wa_name to is_name.
l_param1o_tab = IS_NAME.
ob_core = cl_crm_bol_core=>get_instance( ).
        ob_core->start_up( 'ALL' ).
TRY.
      query_1o = cl_crm_bol_query_service=>get_instance( c_query1o ).
    CATCH: cx_crm_unsupported_object.
ENDTRY.
query_1o->set_query_parameters( EXPORTING it_parameters = l_param1o_tab
                                              iv_convert    = abap_false ).
lv_result_1o ?= query_1o->get_query_result( ).
        ob_query = cl_crm_bol_query_service=>get_instance( c_BTQueryAUI ).
ob_query->set_query_parameters( EXPORTING it_parameters = l_param1o_tab
                                              iv_convert    = abap_false ).
lv_result_1o ?= ob_query->get_query_result( ).

Tried obtaining the output using SQL and the result is as follows:
SQL> WITH T AS
2 (
3 SELECT 1 COL1 FROM DUAL
4 UNION
5 SELECT 2 COL1 FROM DUAL
6 UNION
7 SELECT 3 COL1 FROM DUAL
8 UNION
9 SELECT 4 COL1 FROM DUAL
10 UNION
11 SELECT 5 COL1 FROM DUAL
12 UNION
13 SELECT 8 COL1 FROM DUAL
14 UNION
15 SELECT 9 COL1 FROM DUAL
16 UNION
17 SELECT 10 COL1 FROM DUAL
18 UNION
19 SELECT 13 COL1 FROM DUAL
20 UNION
21 SELECT 14 COL1 FROM DUAL
22 UNION
23 SELECT 15 COL1 FROM DUAL
24 UNION
25 SELECT 16 COL1 FROM DUAL
26 UNION
27 SELECT 23 COL1 FROM DUAL
28 UNION
29 SELECT 24 COL1 FROM DUAL
30 )
31 SELECT OUTPUT FROM
32 (
33 SELECT DECODE(COL3,NULL,COL1, COL2) || '-' || LEAD(DECODE(COL3,NULL,COL3, COL1)) OVER (ORDER BY DECODE(COL3,NULL,COL1, COL2)) OUTPUT FROM
34 (
35 SELECT COL1, LEAD(COL1) OVER (ORDER BY COL1) COL2, LAG(COL1) OVER (ORDER BY COL1) COL3 FROM T
36 )
37 WHERE
38 (COL2 - COL1 > 1 OR COL2 IS NULL OR COL3 IS NULL)
39 )
40 WHERE OUTPUT != '-';
OUTPUT
1-5
8-10
13-16
23-24

Report execution in batch mode

Similar Messages

Maybe you are looking for