Report export webi to excel with zero values in tables

All,
I export a report from Business Objects Infoview and it doesn’t allow for showing data elements of graphs or data tables that correspond to zero value data.
When I export my report the months with no data drop from the graphs and tables. I would like the exported version of the report to show zero's in the table and no graph. My report shows the previous 3 months so if there was no data for Feb and I ran the reprot today it would only show 2 graphs and not 3.
Any assitance with this issue?
Thanks,
John

Hi,
There are options for the "save as excel" step . either a) for formatting , or b) for data
these should help.
The reason why there are 'undesirable' rows (also, merged rows / columns) is because your report document has table outlines which have been positioned 'by eye'.
When the rendering algorythm outputs it content, it's looking at pixel-level , so the relative position of borders can get messed-up. It's mainly due to slightly sloppy formatting.
Regards,
H

Similar Messages

Export webi to excel with the exact same format

Hello expert,
I develped a webi report, but when I exported it into excel file, its format is defferent from WEBI report, such as text for legend with multple lines in webi presented in one line in excel, there are a few descrepency. please tell me how can I export webi to excel with the exact same format?
Many Thanks,

Hi,
There are options for the "save as excel" step . either a) for formatting , or b) for data
these should help.
The reason why there are 'undesirable' rows (also, merged rows / columns) is because your report document has table outlines which have been positioned 'by eye'.
When the rendering algorythm outputs it content, it's looking at pixel-level , so the relative position of borders can get messed-up. It's mainly due to slightly sloppy formatting.
Regards,
H

Export Excise invoice updating with zero value

HI cin gurus.
While creating excise invoice for Exports in J1IIN , after selecting the Export button Excise values getting changed as zeros . ARE1 form coming with zero
Any reason for that.
Expecting your support
Thanks
JA

Dear Jaffer,
i think you have to apply this user exit
FUNCTION J_1I7_USEREXIT_DUTY_IN_EXPORT.
""Local Interface:
*" IMPORTING
*" REFERENCE(YVBRK) TYPE VBRK
*" EXPORTING
*" REFERENCE(SUPPRESS_CALCULATION) TYPE J_1IEXCHDR-STATUS
*If you do not want the excise duty to be calculated for a particular
*transaction then you need to mark the flag supress_calculation as 'X'
*This flag when left blank will trigger calculation of ED during j1ii
*When it is marked, the ED copied from billing will be left as it is
SUPPRESS_CALCULATION = 'X'.
ENDFUNCTION
Regards,
Anand.K

How to Display WBS's with Zero values in a report created by CJE2

Hi All,
I have created a report using CJE1 (Report painter). When I execute the report, it only shows WBS that have values. How do I display WBS elements that do NOT have values? i.e. display items with zero values. I'm certain there is a setting either within report painter or forms...
Help appreciated.
Samir

Menu>Formatting>Report Layout and then tab Rows. Check if setting under 'Treatment of zero rows' helps.
Regards
Sreenivas

Missing data when exporting webi to excel (not 65536 limit problem)

Hi guys
I just meet a problem about webi that it will miss data when exporting webi to excel.
It's not about 65536 limitation, as my webi report do some aggregration and limitation and never beyond that limitation.
Also there are 2 tabs in my reports, if I split the 2 tabs into 2 separate reports and export them separately, then problem disappeared.
Any ideas on this?

Hello Claes
according to:
http://help.sap.com/erp2005_ehp_05/helpdata/en/c1/eda0f591ec12408b25e7a1b369ca45/frameset.htm
Tools => Import and Export => Specifying the Sequence of the External Data Structure => External File Structure: Specification
Table EST07 should be part of export file. I am not sure if the packing requirement ist part of EST07.
Furthermore wirh ECC 6.0 EnhPAck3 some changes happend generally in the area of DG classification.
E.g. Dynamic dangerous goods classification. I am not sure if these changes are "included" in some sense in the EH&S data download.
With best regards
C.B.
PS: please check this link on the top:
http://help.sap.com/erp2005_ehp_05/helpdata/en/c1/eda0f591ec12408b25e7a1b369ca45/frameset.htm
Refer to "Table Assignment: Specifications"
I believe packaging requirement is part of table EST0B but this is part of the download file.
Edited by: Christoph Bergemann on Aug 27, 2011 7:12 PM
Edited by: Christoph Bergemann on Aug 27, 2011 7:13 PM

How to create rtf template to view report in Word and Excel, with numeric f

Hi,
Please help me!
How to create rtf template to view report in Word and Excel, with numeric formatted fields (like this 999 999 999,99 with spaces between numbers) and then end user be able to process those fields with Excel tools (sum, etc).
Thank you.

From what I have seen Excel can not handle 999 999 999.00. You can use 999999999.00 and then format it as you want in the xls bt you can not have values like 999 999 999.00 coming from publisher output and have functions on the values in Excel
Tim

PO with Zero value in SRM

Dear All;
We are using SRM7.0 with classic scenario i.e shopping cart is created in SRM and PO is triggered in SRM but created in ERP.
Sometimes, the buyer gets a shopping cart with several lines. After negotiation with the supplier, he agrees (the supplier) to give one of the items as free.
While converting SC to PO in SRM, the system asks to enter a price so that PO can be created in ERP. Then the buyer has to put 1 then goes to the ERP and tick the free indicator flag.
Is there a way to create a PO with Zero value from SRM?
Thanks

Hi ,
After the price is entered in the PO in SRM , delete the price conditions in the conditions tab at the item level in SRM . This will mark the free goods tick in the ECC automatically .
This works in our extended classic system .
-Hari.

Extra accouning line item in billing document with zero value

Hi,
I am using TAXINN procedure, the following accounting document has been generated during billing.This accounting document contains an extra line item with zero value.
However, There is no necessary for this line item with zero value. Can you tell me how to remove this line item?
000       50          VAT Payable                       A0             0.00
001       01          Sale within state                 A0      1,212.00
002       50          Sales f/goods-Dome.          A0      1,000.00-
003       50          ED Collected Clr.                 A0          160.00-
004       50          ED Collected Clr.                 A0              3.00-
005       50          ED Collected Clr.                 A0              2.00-
006       50         VAT Payable                      A0            47.00-
Thanks,
Kanhu

Hi
Check if there is any summarization active for billing documents generated through SD. The path for the same is:
IMG>Financial Acxounting>General Ledger Accounting>Integration>Sales & distribution
Check for table VBRK
Regards
Sanil K Bhandari

ERS generated document with zero value for SES

Hi,
I have maintained service entry sheet.
Accounting entry is generated.
When I run T code MRRL, it has generated document with zero value.
This is not a free goods PO.
Why this is happening?
Please guide on this issue.
Regards,
Piyush

Hi,
Creating an ERS zero document is an expected system behavior ,you
could create an ERS zero document by doing the following wrong
procedure:
1. Create PO with ERS falg ON.
2. Perform GR for PO.
3. Create the invoice by MIRO.(Not MRRL).
4. Run MRRL (LIV-ERS).
For every purchase order with flag 'ERS' a table entry is generated.
If a goods receipt is posted, this GR should be invoiced via ERS
(Tr. MRRL). Manually posted invoices should be avoided, because
the table entry will not be deleted. A new invoice receipt must be
created while running ERS (but with amount and quantity zero and without
FI documents) in order to give a message to the vendor because he
has sent you an invoice by mistake.
Could you please check also the note:1069215
Best regards
Erika

TCode MIR7: Dump while deleting Parked Invoice with zero value

Hi,
We had parked an Invoice using TCode MIR7 with Zero Value with reference of a PO. Now as the value of invoice is zero, we want to delete it using MIR7.
In MIR7, when we go to Invoice Document-->Delete, it results in dump. Dump is as follows:
Error analysis
    Short text of error message:
    No document found
    Long text of error message:
    Technical information about the message:
    Message class....... "FI"
    Number.............. 124
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "MESSAGE_TYPE_X" " "
    "SAPLFMPR" or "LFMPRU05"
    "FM_CO_DOCUMENT_DELETE"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which actions and input led to the error.
Information on where terminated
    Termination occurred in the ABAP program "SAPLFMPR" - in
     "FM_CO_DOCUMENT_DELETE".
    The main program was "SAPLMR1M ".
    In the source code you have the termination point in line 34
    of the (Include) program "LFMPRU05".
Any help.
Regards,
CMC Team.

Hi,
Check following SAP notes:-
1173846 (MM) Termination when deleting prepaid logistics invoices
Reason and Prerequisites
This problem is caused by a program error.
1224772 (MM) Error message FI24 when deleting parked invoices
Reason and Prerequisites
This is due to a program error. The total amount of the parked invoice is '0'.
Regards,
Anand Raichura

Incoming payment with zero value

Good Morning,
I'm trying to do an incoming payment with zero value (Negative JE and Positive Invoice selected) but I have the error message: "Confirmation amount must be greater than zero". I have the Internal Reconciliations to do that, but I need to print an outgoing payment document (and with sequence number) with this.
I'm working with Sap Business One 2007 A SP: 01 PL: 10. This option was available in previous versions. Do you know what can I do?
Thank you.
Regards,
Susana Cunha.

Dear Ms Cunha,
I am sorry but it is not possible in 8.8 either.
However, a workaround is adding this document with a negative value (even -1 as doc total is enough) in the same payment with antoher document that carries positive value.
I tested this scenario in 8.8 and it worked because the postive document had a total document higher than the negative document.
Regards,
Marcella Rivi
SAP Business One Forums Team
Edited by: Marcella Rivi on Jun 16, 2010 4:46 PM

Is it possible to create purchase order with zero value ?

Is it possible to create purchase order with zero value ?

Hi,
There are two scenarios where the purchase order is created with zero value.
1. Standard Purchase order with Free tick indicator.
Whenever we expect a material with free of cost from vendor, we use to put the free indicator in item overview. This means the material is valuated at zero price irrespective of price control in material master. Quanitiy is updated while receipts.
Conditions tab in item detail doesnt appear.
2. Consignment PO.
While creating a purchase order for consignment, the system doesnt ask us the price and the condition tab doesnt appear in item detail.
An info record for consignment must be maintained before making the GR.
Hope i have clarified. If you want any further clarification. please do reply.

Outbound created with zero value against STO PO

Hi experts,
I have created an outbound delivery (VL10D) against STO PO. OBD has been created with zero value. in PGI correct accounting entry is getting generated. However, material price is maintained in STO PO.
Please highlight the gaps, due to which amount in OBD is coming as zero. Subsequently, in billing document zero value is appearing.
regards

probably something wrong in your price schema if you want copy the price from the STO, or you just missed to maintain the price conditions if you use special intercompany prices.
For details see OSS Note 338922 - Analysis note for cross-company transactions (delivery)
look at point 6 in this note.

Copa assessment from cost center posted with zero values

Hello all,
We are running for the first time in my clients system assessment cycle for actual values from cost center t copa
The cycle at the test run shows the values and the reciever tracing factor allright but in update run the document created with zero values
Can anyone adress me why this happnes
Thanks
Michal

Hi,
You must be getting some errors in update run, like profit center update (if new gl active) or other, please check and revert.
Br

Inventory difference.. upload with with zero value

Hi
Material : Label . Sticker
UOM     : KG
Additional UOM : EA ( 1 KG = 100 EA approx. ) normally it varies + -10%. means some times there are 90 EA in 1 KG, sometimes 110 in 1 KG.
We purchase Stickers in KGs. and Issue in EA in System . for example when user request issue 500 Ea labels. we issue 500 EA label in system, but physically we give 5 KG.
when user consumed 500 EA and , then he found 45 EA left out of those 5 KG. ( means actually there were 545 Ea in 5 KG Lables).
how we can take these 45 EA. into Inventory. ( upload quantity only ) ( with out any accounting entry \ with zero value ).
or is there any other best way to deal this. keeping in view it is impossible to count these lables while purchasing or issue.
thanks \ thomas

thanks Guru for giving time.
with this 2nd option
Option2
post a 202 movement, use external value field(may need to be customized) and give zero value there.
This has the benefit that you would not give a credit to the cost center,
and as you post the inventory for zero amount,
a new moving average price is automatically calculated and updated in material master.   "
when i tried with MB1A and 202. one thing. Cost center is compulsory second there is no filed "External Value Field" ( plz guid some steps how to customize it . ,
thanks \ thomas

Report export webi to excel with zero values in tables

Similar Messages

Maybe you are looking for