Report field position

hello
I m using report 10g..
I want to move position of field at run time and also want to set elasticity at run time... can i do that?
srw package doesnot support this. any other alternative?

No, you can't explicitly move the position at runtime. But you can influence the field-position by hiding other fields in the layout next to the one item to move with elasticity variable or shrink

Similar Messages

Inspecting report field position properties

All,
   Does a way exist to inspect a report fields properties within CR script used in a formula. I know about using code withing the X+2 buttons in the layout tool, but would like to know in a formula what the position and width of any arbitrary report field in the detail band might be.
thanks,
pf

Thanks for responding. I need to do this at run time.
    1) Suppose I had 25 columns and each was associated with a boolean report parameter that allowed the user to toggle columns off and on.
    2) Further suppose the user decided that she does not need columns 7, 12, and 20.
     I want to do the following:
         1) suppress columns 7,12,20 (this is easy)
         2) move the remaining columns 8 and greater the appropriate twips to the left.
     I can do all this now but I must "hard code" the field position into a string with delimiters which I later split into an array to use in determining the x offset (if any) for each unsuppressed column.    Life would be easier if one could just inspect the X position of any field. Please let me know if this helps in understanding the problem.
pf

I want to change the infotype 0002 field position(first name & lasname)

Dear Freinds,
I have requirement where i have to change the positions of the first name and last name , as pe standard we will see is
the lastname under that field we will se the first name . As per the user he wanted first name and then last name . I have read in sap help that it says the table T522N is the place. But before using i wanted to can i change or is there any method where i can do.
i have changed the name2 as middle name by going to cmod and changing the text label. Here it dint asked me any access key.
similary for chaning the position of the two fields can i do so please let me know if any body has done this.
regards
divya.

Hi Divya,
You can't change the position of the fields in standard SAP screens - PA30/20.
This would be repair and you need to get access key to change the 2000 screen of module pool MP000200.
T522N is used to change the name format in reports, etc. (Firstname Lastname or Lastname Firstname) It has nothing to do with the field positions in the screen of PA20/30.
Regards,
Dilek

Report for Positions by Trader in Securities

Hi,
I searched for various reports but could not find an option to select Trader in order to generate a report for positions (or journal/transactions/cash flows) in Securities.
I need a report in Securities which should have a selection for Trader and Portfolio fields among others (similar to TPM20). Is there a way in the standard SAP reports?
Thanks in advance,
Durga.

Hi,
For securities, position management is supported at maximum against ID, Security Account/Portfolio/Fund and Gen Val Class (Fund from EhP4 onwards).
Trader field is not a key figure where you can get accumulated position report.
If you wish to maintain trader wise position, the possible way out will be to map Gen Val Class or Portfolio one to one with Trader. Or develop a customized position report considering trader into consideration but condition/corporate action flows will not be under control as clarified by Ravi. Look for a customer exit code to call Trader in that case.
Regards
Prasad AV

Difference Between Inventory Audit Report & Inventory Positing List Report

Dear all,
Please tell me the difference between these twoInventory Audit Report & Inventory Positing List Report, Because I find difference , when observe Closing and Opening Stock Quantity on 1.4.10 audit report showing 610 units but on 1.4.10 posting list showing 973 units of opening stock
Why so happen ? can anybody explain............
Thank you
Komanduri

Hi......
Please read below.....
Inventory Audit:
This report provides an audit trail for the posted inventory transactions in the chart of accounts.
You use this report to make comparisons between the accounting view (inventory balance accounts)
and the logistics view (inventory value displayed by the audit report). The report explains the value changes in inventory accounts.
Inventory Posting List:
The inventory posting list provides an overview of all postings in the system, based on various selection criteria and sort options. You can generate a report for specified warehouses based on one of the following selection criteria:
Item
Business partner
Other: Enables you to specify a selection criterion such as warehouse or sales employee.
Inventory Transfer:
You use this function to transfer inventory from one warehouse to another. An inventory transfer can also be carried out as a consignment for a customer. The items are then stored in the customeru2019s warehouse and are sold from here.
You cannot change the table after it has been added. If you display an existing inventory transfer later on, none of the fields in the table are active.
You can, therefore, only correct an inventory transfer table that has not been entered correctly by entering a compensatory goods movement later.
For more detail please refer help file in SAP.....
Regards,
Rahul

Can You Use A Report Field Value In A Hyperlink?

I have a report field that I would like to be a link to another application. Making a report field a hyperlink to a web page was nice and simple. However, I was expecting to be able to use the value of the field in the hyperlink something like...<a href="http://mywebsite/controller?action=servlets.ReportAlertDetailListAction&key={AlertSearch.ALERT_KEY">http://mywebsite/controller?action=servlets.ReportAlertDetailListAction&key={AlertSearch.ALERT_KEY</a>}...where AlertSearch is the table name and ALERT_KEY is the field name. Is there a way to use a report field in a hyperlink? Would using a formula allow it to be dynamic? The goal is to have each row of the report link to a URL with a different parameter. I can see eventually redoing it as a drill down feature but the detail I need already exists in a separate application.Thanks,Ed

Hi Ed.
I believe the conditional formula that you would use (don't just type in the text box - press the button for the formula first).
"[http://mywebsite/controller?action=servlets.ReportAlertDetailListAction&key | http://mywebsite/controller?action=servlets.ReportAlertDetailListAction&key]=" + {AlertSearch.ALERT_KEY}
The key is toÂ use the conditional formula feature of the hyperlinkÂ feature.Â
Enjoy!Â
Â Â Â Â - Kathryn Webster (Report Design Consultant)
Â Â Â Â Â Â Â Â Â Â Kat's News: http://diamond.businessobjects.com/blog/279

Custom fields position change in srm 7.0 in Purchase Order on WebDynpro

Hi Experts,
We are upgrading to SRM 5.0 to SRM 7.0
In Purchase order screen,under account assignment,we want to see the acocunt assignment detailed view as the default view under tab "ACCOUNT ASSIGNMENT".Click on the DETAILS button and then the details show up in the bottom part of the screen.
Can anyone advise how do we change the postion of fields in the account assignment tab which are created dynamically.
My requirement is :
Rahmenkostenstelle field should come below Bahnstelle field
WebDynpro Component: /SAPSRM/WDC_UI_DO_ACC
View: V_DO_ACCOUNT_DETAIL
Thanks,
Aarthi.

Hi,
Did you manage to solve the issue? I've tried to define customizing point "Configure Generic Field Display on User Interface" with no luck.
I've even tried to enhance the corresponding WD Component for SC items detail. Field position is correct in the layout editor, but position changes when fields are rendered in runtime.
Does anybody have any idea regarding related OSS? what am I missing?
Regards

Code for reports field

Hello,
In Administration -> Setup -> Business Partners -> Countries there is a field called 'Code for Reports'. Does anyone know what this field is for? I thought it was for possibly putting in a different variation of the country code, e.g UK instead of GB to be displayed on printouts however it is not being displayed when i print preview/print.
Any advice is appreciated.
Many thanks,
Kate

Hi Gordon,
I've tried displaying code on the print layout too but this does not get pulled through either. I would like to use the 'code for reports' field to display 'UAE' instead of 'AE'. 'AE' is the default country code for United Arab Emirates which cannot be changed however the users would like to see 'UAE' instead.
Kind regards,
Kate

Multiple report fields from single physical column.

Hi Experts,
I have a physical table like below. Multiple records for a single customer id. The no of Address_type may increase in future.
Customer_id     Address_Type         Address
101                  Primary                   abcdefgh
101                  Secondary               234oij3mb4
101                  Billing                      mdmnweoij4
102................etc.
My Requirement on OBIEE is to display report as below.
Customer_ID, Primary_Address, Secondary_Address, Billing_Address.
101                 abcdefgh            234oij3mb4               mdmnweoij4
Multiple report fields ( Primary_Address, Secondary_Address, Billing_Address ) are derived from same physical column ADDRESS.
I tried to duplicate the Address column on the report thrice and added conditions like Address_Type = Primary/Secondary/Billing for those three fields respectively.
But only of the field is getting correct data and rest of duplicate columns are null.
Tried FILTER function on OBI Answers, but the function fails saying it should be used only on measures.
Thought the alternative would be to define multiple logical columns at BMM layer. Created multiple alias for same table at physical layer and correspondingly created LTS for each on a single logical table. Defined Fragmentation/Where conditions.
LTS1 - Address_Type = PRIMARY
LTS2 - Address_Type - SECONDARY
LTS3 - Address_Type - BILLING
Created multiple logical columns from each LTS like Primary_Address, Secondary_Address, Billing_Address from LTS1, LTS2, LTS3 respectively.
This time, am getting data for all the fields on the report but getting cartesian result.
Can someone guide me whether my approach is correct or any other alternate best approach to achieve the desired result.
Note: I have the data Address on multiple physical rows for a customer, rather Not in a single row. which is causing me problem.
Thanks...
Ramchand.

Hi Srini VEERAVALLI,
I have lot many other fields in the same report coming from other tables.
Does the Pivot table option for above mentioned Address fields affect other columns?
If Yes, Can there be any other alternative? Am thinking of Opaque View at Physical layer to bring all Addresses on a single row.
Thanks...
Ramchand.

Crystal Reports Field Explorer not showing

Hi,
I am using Visual Studio 2003 with the bundled version of Crystal Reports. It has always worked fine until recently the Field Explorer tool bar does not show up anymore when I open a Crystal Report for development. I have uninstalled the entire Visual Studio and reinstalled the Visual Studio but it still will not show the Crystal Reports Field Explorer. However, if I install the Visual Studio on a completely different computer it works fine. Anyone have any idea what could be causing this problem on my main computer? Could it be a setting somewhere in the Visual Studio? I cannot find any information on this problem.
Thanks,
Razzle

Ok, I figured out what the problem was. It was something wrong in my Windows profile. So I deleted my Windows profile and created a new one and it is working now.
Razzle

MSS Competence Report by Position not working in portal

Hi,
We have developed a custom R/3 report which is "Competence Report by Position". This report need to be accessed via Reporting iview of the portal.
And in portal we have added new object Selection criteria "Position by Operational Org units ".
Once we select this report in the portal and in next step we select the Object selection criteria "Position by Operational Org units " and click on Report Result we are getting the object selection screen saying Please specify an object type(this is in IAC window)
instead we want the report to be shown directly.
We suspect that due to some issue position value is not going into the program and so it is asking for object type again.
Please suggest are we missing something here?
Backend version :ECC 6.0
Thanks
Raj

Yes, but I am using 10.5.2. I was charged for 2 season passes of a show. When I hit "report a problem" it takes me to the support page. Within the support pages I used "Express Lane" to open a case. I am awaiting their email back. I am just hoping they don't tell me to use the "report a problem" again.

Dynamically set report field value

In my old classic VB project, I was able to set a report field value using the following simple line of code.
someReport.SomeField.SetText u201Cabcu201D
This was nice and simple, now with crystal reports .Net I do the following:
((TextObject)someReport.SectionX.ReportObjects["SomeField"]).Text = u201Cabcu201D;
Itu2019s simple enough but seems too elaborated compared to the good old VB6.
Not that is a big deal but is there a simpler way (Classic VB6 style) to set a field on a report without me having to create my own utility method to u201Csimplifyu201D things?
Thanks.

Perhaps using a formula?
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Public Class Form1
Inherits System.Windows.Forms.Form
Dim Report As New CrystalReport1()
Dim FormulaFields As FormulaFieldDefinitions
Dim FormulaField As FormulaFieldDefinition
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
FormulaFields = Report.DataDefinition.FormulaFields
FormulaField = FormulaFields.Item(0)
FormulaField.Text = "[formula text]"
CrystalReportViewer1.ReportSource = Report
End Sub
Other than that, InProc RAS, but if the solution you have is complicated, you ain't seen nothing yet
- Ludek

Problem in Screen field position ( Module pool )

Hi Experts,
We changed the screen field position ( GUI ) of SAP standard module pool program. we had taken the access key from SAP and modified the layout.
Our Problem : We had transported these change request to Quality and Pre Production. The changes are transferred correctly in Quality . when coming to Pre Production the changes are not visible on the screen.
Checks Performed : 1. We had analyzed the Transport request - They are imported correctly.
2. We had rechecked the layout that we had changed its good and correct.
Can you experts help me out in identify the exact solution for this problem.
- Best Regards,
Sudhakar Puppala
Edited by: CRM Sudhakar on Sep 16, 2010 11:25 AM

Hi, no idea can be given without having a look..
but just check the screen layout in the pre-production itself..instead checking transport..

Text data source for the field Position(PLANS)

Hi Experts,
I have an infoobject ZPOSITION which i am using in a cube for this i can able to display key values but i want to display text for this ZPOSITION. The source for this field is Position(PLANS) which i have tacken from pa0001 table.
I have an another infoobject 0HRPOSITION for this i have already loaded data using data source 0HRPOSITION_TEXT.
Is there any other text datasources for this field Position(PLANS)?
And
Is it possible to load data from one info object to another info object?
Regards,
Sridhar.K

Hi Sridhar,
Check out in the infotype PA0001 for the check table for this field. In this table you will have the description for the field PLANS (Position).
I request you to catch hold of functional HR team member to know where the text value for the Position (PLANS) is stored. You can get the info from them immeadiatly.
After knowing the table where the text values for Position (PLANS) are stored, you have to create a text datasource using RSO2 transaction and replicate in BW and load data from the R/3 table.
Hope this helps you.
Regards,
Saravanan.

Making dynamic links from report fields

Is there a way to make report fields link to differnt websites? I can't use the 'link' tool in 'editing' option of making the report because the link will not be the same for each record in the database. The field itself is actually the address of the website I want to be able to link to. So essentially, what I want to do is something like: ..but this does not work. Does anyone know if this is possible??
Thanks!

You can use SQL report to do this:
Suppose the column which contains the web addressed is called url_column, your SQL
will be something like
select htf.anchor(url_column, name) from the_table
Then in the Column Formatting page,
set the "Display as" for column url_column as HTML.
Run the report and the values form that column will be a url which links to other web sites
null

Report field position

Similar Messages

Maybe you are looking for