Report file version too old

Hi, I hope I am in the right forum. I downloaded crystal report viewer 2008, but need to view a report that was created using an earlier version. The error message I get is as follows, " Report File version too old. This report was saved from a version of crystal report older than version 9 and cannot be viewed. To fix the problem please open and resave the report from a version of the crystal report designer application at least as recent as version 9".
How do I do this. I cant seem to get the older versions on the net anymore. Please help

The error message says "at least as recent as version 9".So, you can try with any version after 9.Following is the link to download a free trial version:
http: //www.businessobjects.com/product/freetrials.asp
You may try with Crystal Reports XI or Crystal Reports 2008

Similar Messages

FRM-92160: Web Client version too old

Hi folks,
i have been developing and running my forms using Oracle 9iDS and the Oracle 9i database. The forms are run in the browser using the version of OC4J that comes with the developer suite.
i installed Oracle 10g Application server forms and reports services recently, however i have decided not to run my forms through the application server as yet.
when i tried to run running a form, i had an error message saying
FRM-92160: Web Client version too old.
I tried looking up the error but couldn't find it anywhere.
I can't run my forms now and i do not want to go through the application server as yet.
Any suggestions as to what to do?
Thanks in advance.

I run into the same problem after upgrading my AS10g/W2k to 904011: Forms from the MiddleTier did run, but a Forms started from the DevSuite-environment would raise FRM-92160.
What worked in my case was copying the MidTier's '...\forms90\java' files over to the DevSuite, ie.
- backup [DevSuite_Home]\forms90\java to java0
- copy [MidTier_Home]\forms90\java to [DevSuite_Home]
After that, my Forms run flawlessly from both DevSuite's OC4J and the AS MidTier. I also 'upgraded' formsweb.cfg in [DevSuite_Home] from JInit 1.3.1.17 to 1.3.1.18 - works.
Cheers
Tino

Version too old error

Post Author: niketya
CA Forum: Older Products
I have never used Crystal Report so my knowledge about this product is rather poor. We are using crystal viewer in a custom made application which generates crystal reports and saves them in 1rd format. Granted we can export the documents to pdf, however people choose not to. Anyway, we are getting a new web application and it does not use Crystal Report. I have installed the CR XI viewer and when open a report file I get the following along the lines of "Version too old use version 9 to open it". Clearly the generated reports are from version 9. I was wandering If I could open these reports in Access or in a stand alone application? Many thanksNiketya

Actually the JRE/Jinit version has nothing to do with the error. The error is caused when the Forms applet (i.e. frmall.jar, frmall_jinit.jar) version is not in sync with the Forms Servlet or Runtime version.
Clear the JRE/Jinit JAR cache and retest. If this continues to fail, consider whether or not you have recently installed any patches to the Application Server. If so, you may have not successfully completed that task. If the client jar files (i.e. frmall.jar, frmall_jinit.jar) where not updated during a patch installation, the error you are seeing is likely to occur. This can also occur if the client accesses more than one minor version of an Application Server installation (i.e. 10.1.2.0.2 and 10.1.2.2).
Installing a new JRE only indirectly solves this problem. The reason is that when a new JRE is installed, the JRE cache is empty the first time it is used and therefore resembles the cache clearing recommendation noted above.
FYI: FRM-92150 Client version too new occurs, after a patch installation, when the client JAR files are updated but the Forms Servlet or Runtime is not. Again, clearing cache can sometimes solve this problem if recent patching was not attempted.

FRM-92160:Fatal error:Webclient version too old

Somebody pls assist.
I am running 11gR2 on Redhat, the forms can run on ie9 but can't on ie8. I am getting "FRM-92160:Fatal error:Webclient version too old". Anything I didn't do? I need this wotking as well on ie8.
Any help would be appreciated.
regards
Mo

Fortunately, the "Web client too old" or "Web client too new" errors are very accurate and clear. When a Forms application attempts to start, one of the first things which occurs is a verification that the client applet (frmall.jar) is of the same version as the server side runtime which is about to host it. "Web client too old", means that the client jar is of an older version than the server side runtime (i.e. frmweb.exe). This can occur if more than one Forms version has been accessed from the same server. Remember that the jar files are cached on the client (in the JRE). So, if you were to run something like v10 from serverA then attempt to run v11 from the same server, you likely would end up with a client too old error. The same would be true if you first try to run 11.1.1 then attempt to access 11.1.2 from the same machine. The issue can also occur if for some reason the jar files in the installation were not patched during a patch installation. This would be rare, but could occur if the patch installation failed during the process. It could also occur if you copies old files into the installation. This is never a good idea.
So, as mentioned, start by clearing the JRE cache and retesting.
1. Close ALL open browsers.
2. Open the JRE Control Panel (found on the Windows Control Panel).
3. On the General tab, click on "Settings..."
4. Then click on "Delete files..."
5. Then click on "Ok".
6. Exit the JRE Control Panel and retest.
Important to note is that JRE7 is NOT supported with 11.1.2.0. Be sure that you are using JRE6. If you have JRE7 installed, I would recommend closing ALL open browsers and uninstalling it. You should have only JRE6 installed before testing.

FRM-92160: WEB Client Version too old & Vis R12.0.4 invalid objects

Hello all,
I'm installing Vision R12.0.4 in a server. That server used to contain Vision R12.0.0 which I upgraded to R12.0.4 but still had some invalid objects (I already submitted that problem in another thread). I installed the new vision instance to the same folder used to contain R12.0.0 vision after remove the old installation.
After all installation steps completed I tried to connect from my laptop but I got this error message :
FRM-92160: WEB Client Version too old
Had tried to uninstall all java from my laptop but still had the same error message. I had oracle form & report developer 6i and 10g in my laptop. Tried to remove that installation and cleaned the registry but failed to delete LEGACY_ORACLE_LOAD_BALANCER_GO_CLIENT and some other objects.
I checked the installation and found 35 invalid objects, do APPS compile and left with 32 invalid objects. Here are the invalid objects :
OWNER     OBJECT_NAME
APPS     IGCBG_CC_NUMBER_METHODS
APPS     IGCFG_CC_NUMBER_METHODS
ORDSYS     ORDIMGEXTCODEC_PKG
ORDSYS     ORDIMG_PKG
SYS     XMLGENFORMATTYPE
SYS     LCR$_ROW_LIST
SYS     LCR$_ROW_UNIT
SYS     AQ$_SRVNTFN_MESSAGE
SYS     AQ$_REG_INFO
SYS     AQ$_REG_INFO_LIST
SYS     DBMS_SUMADV
SYS     AQ$_REG_INFO_LIST
SYS     DBMS_XPLAN_TYPE
SYS     DBMS_XPLAN_TYPE_TABLE
SYS     AQ$_DESCRIPTOR
SYS     AQ$_SRVNTFN_MESSAGE
SYS     AQ$_EVENT_MESSAGE
SYS     AQ$_REG_INFO
SYS     AQ$_SRVNTFN_MESSAGE
SYS     MSG_PROP_T
SYS     AQ$_DESCRIPTOR
XDB     servlet-list46_T
XDB     servlet52_COLL
XDB     servlet47_T
XDB     xdbconfig58_T
XDB     servlet-config-type42_T
XDB     webappconfig65_T
XDB     sysconfig59_T
XDB     XDB$RESOURCE_T
XDB     protocolconfig60_T
XDB     sysconfig59_T
XDB     xdbconfig58_T
XDB     httpconfig64_T
XDB     protocolconfig60_T
XDB     httpconfig64_T
How to solve those problems? Thanks.

The following views will remain invalid in 12.0.4:
APPS IGCBG_CC_NUMBER_METHODS
APPS IGCFG_CC_NUMBER_METHODS
This is documented in 12.0.4 Release Note:549389.1
under "Installation and Upgrade Customers"Thanks for the info. At least it solved 2 of my problem rows :P
anyway, I'm sorry that I can't tried to solve the problem anymore cause the storage was needed for another installation so I'd to remove this problem instance. Maybe if I can try it again I'll let you all know. Thanks

FRM-92160 web version too old

Hi guys,
I had installed oracle 9i and developer6i on the server and configue IIS .When i access through client,if win 98 is installed on client it gives FRM-92160 web version too old error but on client where win2000 is installed ,it works.Any help??

Check if you have the correct version of Jinitiator on your Win 98 machine.

File Version too new for FCP6

I just bought FCS2 which came with FCP6.0.1. The lessons on a DVD in an Apple certified manual (purchased separately) won't load -- message "File version too new for the application". I've updated my software but 6.0.1 is as recent as I can get.

You are probably missing other updates required to bring Final Cut up to a newer version.
If you go to Software Updates in the finder menu (uner the Apple Icon) you will get a list of other pieces that need to be intalled before upgrading to the newer versions of Final Cut. Could be QT element, Pro Application Support, or others (do not recall all the updates since 6.01 was released, but I needed to add a few.)
As always make sure to back up your system along the way in case you need to role things back for some reason.

HT202879 downloaded new version of pages now I cannot open my old files-message-too old to open ?

downloaded new version of pages now I cannot open my old files-message-this document is too old to open ?

Pages 5 will not open Pages '08 files.
Pages '08 should still be in your Applications/iWork folder.
Peter

Why do I get "Version too old to administer message" with CS5?

I am using CS5 with Windows 7 to administer and edit six websites.
With five sites, I have no problem accessing Administrator dialogue box. With one site I get a message saying "Your version is too old to Administer this website." The error cropped up very recently, after I contacted my server, who sent me a new connection key. (I believe my server only has CS3 and have noted comments re compatibility.)
I tried making a new connection via CS5.-- connection works fine but the same error message crops up when I go to the Administer option.
I don't know if this is related to another problem that initially led me to contact my server:
I do a lot of updating on this site -- www.commentopia.com - When I attempt to publish, i keep getting an error message:
"Contribute encountered a network or file system error. Please try again etc." When I try again, the page publishes with no problem...
I encounter the same error message with my other sites and also get pages published only on second attempt.
Any thoughts will be welcome.
Thanks,
Errol

HHow did you solve this problem?

Version too old to administrate site

We have four administrators for our site, due to its large
size. One of the administrators downloaded the trial version of CS3
to test it out. Now, since she used the administration features
with that version, none of the rest of us can use the admin
features with our version (3.1). It says "Your version of
Contribute is too old to administer this website. Please use a
newer version of Contribute, or contact another administrator."
Any way to fix this, other than upgrading?

If you kept a backup of the "_mm" folder on your site you
might could overwrite the newer copy of the folder.
Short of this I don't think you have any other options other
than upgrading. When upgrading the Administrative functions
Contribute CS3 makes changes to the formatting of the XML files
where the site infromation is stored.

Frm-92160 web version too old error

plz suggest the solution to overcome from it

Actually the JRE/Jinit version has nothing to do with the error. The error is caused when the Forms applet (i.e. frmall.jar, frmall_jinit.jar) version is not in sync with the Forms Servlet or Runtime version.
Clear the JRE/Jinit JAR cache and retest. If this continues to fail, consider whether or not you have recently installed any patches to the Application Server. If so, you may have not successfully completed that task. If the client jar files (i.e. frmall.jar, frmall_jinit.jar) where not updated during a patch installation, the error you are seeing is likely to occur. This can also occur if the client accesses more than one minor version of an Application Server installation (i.e. 10.1.2.0.2 and 10.1.2.2).
Installing a new JRE only indirectly solves this problem. The reason is that when a new JRE is installed, the JRE cache is empty the first time it is used and therefore resembles the cache clearing recommendation noted above.
FYI: FRM-92150 Client version too new occurs, after a patch installation, when the client JAR files are updated but the Forms Servlet or Runtime is not. Again, clearing cache can sometimes solve this problem if recent patching was not attempted.

Synch with desk top using OS X 10.6.8. Won't recognise iPad, which it says has iTunes version too old. How do I update iPad?

I have a desk top upgraded to OS X 10.6.8. Now won't recognise/synch iPad, which it says needs to have iTunes version 11.1 or later. Why hasn't iPad updated or how can I do it manually?

What do you need to update on your iPad? Which model do you have and and which iOS version? If you have an iPad 2 or newer with at least iOS 5 you can update the operating system over your WiFi by going to Settings > General > Software Update.

Error stating mail version too old after 10.6.8 update

I upgraded 3 Intel Macs to Snow Leopard. A Macbook, Mac Pro and an iMac. After the upgrade I ran software update and updated to 10.6.8. This worked without issue on the Macbook and Mac Pro.
However, on the iMac, when I open mail, I get the following message:
You have Mail version 4.2 (1078/1084). It can’t be used on Mac OS X Version 10.6.8 (Build 10K549). For more information, click the Help button.
I've tried reinstalling Mail from the Optional Installs on the Snow Leopard install disk. I've also moved the com.apple.mail.plist to the desktop. None of this is making any difference.

Good call here. I had already done all updates, no new updates were available, that's what was so confusing, mail should have been updated. Then I looked all over for a way to get to find a version of Mail 4.5, no dice.
I spend all day on Windows at work and then come home and forget things like the ability to grab an Application from another machine and drag it to my desktop. That suggestion did the trick and I'm back in business.
Thanks

Modify UUT report file name

Hello,
I use TesStand 3.1 in Batchmode with 4 Testsockets and generate a XML Testreport for every UUT with the serial number in the file name.
I leave the "Enter UUT Serial Number" dialog boxes at the begin empty.
After that i read out the Serial Number of my UUTs at the runtime via CAN and use the "PostUUT-Callback" to modify the "Parameters.UUT.SerialNumber".
Because of that the UUT Serial Number appears in the Report Header.
But the report filename is always "Report[NO_UUT_SERIAL_NUM0][date][time].xml".
Is it possible to modify the "UUT Serial Number" in the Report File Name, too?
Thanx for your answers!
Greetz ALIEN

We modify the report name to include error count, Model, build, etc. but it requires that the Report be complete at that point (file no longer locked by TestStand).
In order to do this, you'll need to create a Sequence (with no Process Model) to call the test sequence using Subsequence call with the "Run Sequence in a New Execution" selected in the "Specify Module", Multithreading selection ring.
There may be other ways to do what you're attempting, but this gives you freedom to rename the file.
Mike

FRM-92160: Fatal error: web client version is too old

Hi All,
We have upgrade the forms and reports from version from 11.1.2.0.0 to 11.1.2.1.0 so the existing applet (11.1.2.0) still there the cache casing the the "FRM-92160: Fatal error: web client version is too old" issue (The new applet version is 11.1.2.1). but this can be resolved by clearing the java cache.
As the the end user count is huge, is there any other possible way to get the cache clear when they access the URL for the first time.
Thanks in Advance
Salai

Hi
maybe you can change default setting in client (user) java option .
path like ( control panel > java > General > temporary internet files > setting button > unchecked keep temporary file )

Report file version too old

Similar Messages

Maybe you are looking for