Report font is changing when running it on OAS Server(Unix)

Hi All,
I have a problem with the font of the report that is generated on the server. The font is not the same as it is with the design time of the report. Can any one please let me know how to have the same font in the report on OAS as it had when it was designed.
regards,
Prasad.

What is the original font that is used? What is the output font that you get in the PDF? Right click on the PDF and check for the Font Properties. You will have to do Font subsetting in uifont.ali file to bring the desired font.

Similar Messages

Why does my font/text change when I switch from Classic 3D to Ray traced 3D in After Effects?

My font/text changes when I switch from Classic 3D to Ray traced 3D. Why is it doing this? Also, I cant get the font/txt to look the same after I switch from Classic to Ray traced. How can I get it to look the same?

I am pretty new to After Effects so I hope it's not my inexperience that's causing the problem. (It probably is)
I just updated to the most current version of AE.
I am on a mac pro late 2013 12GB 6 core. Running OSX 10.9.4
Okay so after looking at it a little closer, I think the color is what mostly changes. The first screenshot is the what the text look like with Classic 3D and the second screenshot is what it looks like after I change it to Ray traced 3D. Also under the "Mode" section..the pull down that says "Normal" disappears. I'm wondering why the font color is changing?

My font sizes change when I send e-mails from Apple Mail.

My font sizes change when I send e-mails in Apple Mail. Sometimes the font style changes, too.
This is unacceptable, as I use my e-mail for business applications.
Any suggestions for a fix?
Thank you.

Before you do that I must warn you that also with PC is the same.
It's not the hardware nor the software that makes the difference, because e-mail must obey to certain rules that is RFC.
Maybe what you are looking for is a message that looks like a web page.
You can find something of that kind here.
http://www.jumsoft.com/stationery/
But again, the recipient e-mail could have little differences from the original that depend on many variables
If you are curious enough to know a little more about electronic mail you can read this page
http://en.wikipedia.org/wiki/Email
P.S.
IMHO you already have the best in Hardware and software. It would be a pity to give away that gem

Report returns wrong data when run on server

Hi,
I'm runing CRS XI R2 on Windows Server 2003 SP2. When I refresh a report in the Crystal Reports XI Designer, I'm getting correct data. But when I schedule the report to run on the server it returns wrong data. The data is different from what I see when I refresh it from the designer. In the report I have running totals set up to count customers that meet a certain criteria. The report is very large. It take almost 2 hours to refresh.
I was wondering what is causing the difference in running total data between refreshing it on the designer and running it on the server. Is it returning wrong data b/c of it not reading all the records? Should I be making any changes to the server settings? I saw that under pageserver, there are options for setting the 'Minutes Before an Idle Report Job is Closed' and 'Database Records To Read When Previewing Or Refreshing a Report". Do either of those have anything to do with the report returning incorrect data when being scheduled to run on the server?
Thanks,
Kim

Hi Xuandao,
You would need to Use Cell Binding and Trigger concept to accomplish this.
Its simple, however, you would have to work on a trial and error basis to understand this concept as implementing the same is subject to your dashboard and WEBI Design.
Open you LiveOffice.
Insert your WEBI, Now, go to Object Properties of your WEBI, select the second tab that says Prompt, Here, it lists the prompts that you have for your WEBI. This would also enlist your BEx variables as well. Select this BEx variable and click on the button that says Prompt at the bottom of this window. Here, select choose Excel Data Range and click on the cell select button on the right (small button that lets you choose what cell you want to bind this prompt to), Now select a free cell that would not be even populated later on when you run the dashboard say A1 (remember the value that you select). Click on OK and again OK. The WEBI Refreshes and you can see all the prompt values at the cell A1. These are all the possible values stored for your BEx prompt variables (these values are fetched from BW system dynamically).
Now, save this LiveOffice, Go to you dashboard. Connect your dashboard to your Live office. Go to Data-> connections-> Now, select the WEBI and in the right hand pane go to Usage tab, here, Click on Trigger cell button on the right hand side and select A1 in you LiveOffice.
It should work fine.
Let me know.
Rgds,
Sreekul Nair

ORA-01843: not a valid month . Receive this error when running report in reporting services but not when running query in BIDS

sql server 2008 r2
RS2008 r2
I can execute the query in BIDS 2008 with out a problem and I can run on our RS2005 server without a problem
But when I deploy report and run on our RS2008 server I get the error
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'NIR'. (rsErrorExecutingCommand)
ORA-01843: not a valid month
QUERY:
select * from NIR_QUARTERLY where birth_date between :PARAM1 and :PARAM2
order by PT_CODE

CAUSE
The problem is caused by not using VALID dates values in the dataset.
- This data problem was masked in the original version as the Predicate(s) used can change between versions of Oracle
- Oracle does *not* guarantee the same explain plan or the specific order of predicates used between versions of Oracle
Reviewing the EXPLAIN PLAN for both versions revealed in this case:
1) The table was partitioned
2) The EXPLAIN PLANS were not the same due to how the partitions were accessed
3) If the same query was used against a non-partitioned table using the same data, the following error would always occur
ORA-01843: not a valid month
4) The problem string value was in this case found to include the string value of '0000-00-00'
The ORA-01843 occurred when using the TO_DATE function against '0000-00-00'
There is *no* Year= '0000' Month= '00' or day = '00' -- therefore the ORA-01843: not a valid month
--Prashanth

CRIO application works in interactive mode but broken VIs reported in error log when run built application on target

I have been getting more than my fair share of grey hairs the past few days because of this. Over the past few months this almost never happened. Lately, after a seemingly minor change to some serial communications code, hardly a single build works without throwing errors like this:
#OSVers: 6.3
#OSBuild: Jun 6 2014, 09:14:16
#AppName: /c/ni-rt/system/lvrt.out
#Version: 14.0
#AppKind: AppLib
#AppModDate:
InitExecSystem() call to GetCurrProcessNumProcessors() reports: 1 processors
InitExecSystem() call to GetNumProcessors() reports: 1 processors
InitExecSystem() will use: 1 processors
starting LabVIEW Execution System 306708506 Thread 0 , capacity: 1 at [3507679466.00933790, (19:24:26.009337710 2015:02:24)]
starting LabVIEW Execution System 306708507 Thread 0 , capacity: 1 at [3507679470.59560204, (19:24:30.595601929 2015:02:24)]
starting LabVIEW Execution System 2 Thread 0 , capacity: 24 at [3507679481.25993776, (19:24:41.259937648 2015:02:24)]
starting LabVIEW Execution System 2 Thread 1 , capacity: 24 at [3507679481.25993776, (19:24:41.259937648 2015:02:24)]
starting LabVIEW Execution System 2 Thread 2 , capacity: 24 at [3507679481.25993776, (19:24:41.259937648 2015:02:24)]
starting LabVIEW Execution System 2 Thread 3 , capacity: 24 at [3507679481.25993776, (19:24:41.259937648 2015:02:24)]
Thread consumption suspected: 3 Try starting 4 threads
starting LabVIEW Execution System 2 Thread 4 , capacity: 24 at [3507679515.59324312, (19:25:15.593243004 2015:02:24)]
starting LabVIEW Execution System 2 Thread 5 , capacity: 24 at [3507679515.59324312, (19:25:15.593243004 2015:02:24)]
starting LabVIEW Execution System 2 Thread 6 , capacity: 24 at [3507679515.59324312, (19:25:15.593243004 2015:02:24)]
starting LabVIEW Execution System 2 Thread 7 , capacity: 24 at [3507679515.59324312, (19:25:15.593243004 2015:02:24)]
Thread consumption suspected: 8 Try starting 1 threads
starting LabVIEW Execution System 2 Thread 8 , capacity: 24 at [3507679515.73854351, (19:25:15.738543576 2015:02:24)]
and
#Date: TUE, FEB 24, 2015 04:47:22 PM
#OSName: VxWorks
#OSVers: 6.3
#OSBuild: Jun 6 2014, 09:14:16
#AppName: /c/ni-rt/system/lvrt.out
#Version: 14.0
#AppKind: AppLib
#AppModDate:
InitExecSystem() call to GetCurrProcessNumProcessors() reports: 1 processors
InitExecSystem() call to GetNumProcessors() reports: 1 processors
InitExecSystem() will use: 1 processors
starting LabVIEW Execution System 306708506 Thread 0 , capacity: 1 at [3507670087.84041262, (16:48:07.840412710 2015:02:24)]
starting LabVIEW Execution System 306708507 Thread 0 , capacity: 1 at [3507670092.45153570, (16:48:12.451535843 2015:02:24)]
starting LabVIEW Execution System 2 Thread 0 , capacity: 24 at [3507670103.11840487, (16:48:23.118404925 2015:02:24)]
starting LabVIEW Execution System 2 Thread 1 , capacity: 24 at [3507670103.11840487, (16:48:23.118404925 2015:02:24)]
starting LabVIEW Execution System 2 Thread 2 , capacity: 24 at [3507670103.11840487, (16:48:23.118404925 2015:02:24)]
starting LabVIEW Execution System 2 Thread 3 , capacity: 24 at [3507670103.11840487, (16:48:23.118404925 2015:02:24)]
VI_BROKEN (0): [VI "NC serial comms protocol.lvlibet Lower Temperature Limit.vi" (0x04667310)]
VirtualInstrument:etOrClearBadVILibrary - now VI is bad on [VI "NC serial comms protocol.lvlibet Lower Temperature Limit.vi" (0x04667310)]
this->flags=33563136, compilerError=6
VI_BROKEN (0): [VI "Heater Control HAL.lvclass:Write Heater Control Active.vi" (0x058c4e98)]
VirtualInstrument:etOrClearBadVILibrary - now VI is bad on [VI "Heater Control HAL.lvclass:Write Heater Control Active.vi" (0x058c4e98)]
this->flags=50340352, compilerError=6
VI_BROKEN (0): [VI "NI_LVConfig.lvlibave Config File.vi" (0x047b7e90)]
VirtualInstrument:etOrClearBadVILibrary - now VI is bad on [VI "NI_LVConfig.lvlibave Config File.vi" (0x047b7e90)]
this->flags=33563136, compilerError=6
and so on.
This is using a cRIO 9074 running CompactRIO recommended software set 14.0.1 .
These errors happen right at startup. Memory use is steady in interactive mode, about 20 MB contiguous memory is unallocated out of 128 MB. I have taken pains to prevent allocation and follow cRIO besta practices non concatenated strings array building in loops etc). CPU is 50-60% when running interactive mode.
Really at my whit's end here, I have tried the various combination of enabling / disabling debugging in the RTEXE, disconnecting typedefs etc. I have not noticed a pattern.
Regards,
MarkCG

Hello MarkCG,
What minor changes did you make to the serial communication code? Posting the VI or a screenshot of the VI with the modifications which caused the RTEXE to stop functioning could be useful to troubleshoot the issue.
Regards,
J_Bou

Min Mx planning report gives an error when run with RE-Stock yes.

Hi All,
We are going to implement Min Max planning for the first time.However when we test it at org level with Re-Stock parameter YES it gave an error.
what are the additional setups need to be done for it?
It works fine when running with re stock no.and gives the out put of the report accurately.
Thanks.
MPH

Hi Garry,
These are the parameters and error codes are also given.
P_ORG_ID='328'
P_LEVEL='1'
P_SELECTION='3'
P_CAT_SET_ID='1'
P_CATG_STRUCT_ID='101'
P_SORT='1'
P_D_CUTOFF='2009/07/03 00:00:00'
P_D_CUTOFF_REL='0'
P_S_CUTOFF='2009/07/03 00:00:00'
P_S_CUTOFF_REL='0'
P_USER_ID='5411'
P_RESTOCK='1'
P_DD_LOC_ID='32488'
P_NET_UNRSV='1'
P_NET_RSV='1'
P_NET_WIP='1'
P_INCLUDE_PO='1'
P_INCLUDE_MO='1'
P_INCLUDE_WIP='1'
P_INCLUDE_IF='1'
P_INCLUDE_NONNET='2'
P_LOT_CTL='3'
P_DISPLAY_MODE='1'
P_SHOW_DESC='2'
P_PUR_REVISION='2'
*MSG-00069: Calling INV_MMX_WRAPPER_PVT.exec_min_max from Before Report Trigger
MSG-00070: INV_MMX_WRAPPER_PVT.exec_min_max returned an error:
REP-1825: Before Report trigger returned FALSE.*

"Selected report cannot be loaded" when running published crystal analysis

Hi,
When running published crystal analysis reports (*.car) within Crystal Enterprise 10 i receive the message below. This is happening to all published crystal analysis reports. Can open the reports fine within Crystal Analysis Professional itself.
"Crystal Analysis Professional - The selected report cannot be loaded because one or more required parameters do not have an assigned value. "
any assistance would be appreciated
tks.

If I memory servers, you have to open the Crystal_Regwiz2003.msm in the .NET deployment project. One of the properties of the msm was Keycode (or similar). You entered the keycode here. To find your keycode; in VS2003 IDE, go to the Help | About screen. You will see one of the installed components as Crystal Reports and the keycode will be on the right of that. Copy the keycode from here, paste in the above.
For more details see the article Crystal Reports and Visual Studio .NET - Application Deployment.
- Ludek
Follow us on Twitter
Got Enhancement ideas? Try the SAP Idea Place
Share Your Knowledge in SCN Topic Spaces

Opening Balances changes when running business rules

Good morning,
We are experiencing problems with the opening balance calculation (Flow: F100) when running the consolidation business rules in BPC 10.1.
For example, in 2013.12, Entity 1111 and Account C_ENL_DIV, the ending balance (Flow: F900) is 180.000 euros. When we run the copy opening balance package, the opening balance (F100) for 12.2014 is 180.000 euros, what which is correct.
The problem comes when some consolidation rules are executed, for example, AU_DIVCTA. For the previous case, we can see that the opening balance changes, previously it was 180.000 euros, coinciding with the final balance of 12.2013 and now the cell is empty, what which is incorrect. This occurs for more than one business rule.
The definition for the AU_DIVCTA business rule, is the next one. You can see that this do not affect to the opening balance in any case.
We attached an Excel where you can see this and much more similar cases the definition for the business rule AU_DIVCTA:

Hi,
Looks like the substitution variables its looking for are missing.
Can you check that?
Regards,
Amol

Font style changes when making a book in iphoto

I am trying to make a book and the inner cover I wrote a little about our vacation. I wanted to make the font size larger so I clicked on the settings button below and this window popped up with "cover title:" "Cover Subtitle:" etc with the font style/Plain/and font size. When I went to change the "Flap Body" font size to make it larger to a size 14 and then clicked ok everyone of those options went from Helvetica Neue to the next font in the list which is ugly. I try to set it to Helvetica Neue and then they all change to another font??????? I ended up just doing open apple z to undo to the original. I use iphoto 7.1.4 and I use the 10.4.11 operating system. I have an imac g5 powerpc. It's not a life or death situation but it is annoying that I cannot change the font size of one thing without having it change the font style of all the options. Any suggestion would be great!!

I once overshot the limit by marking too many photos to fit within 99 pages, but I could never figure out how to fool the application and had to give up trying to add those 14 extra photos.
I asked a friend (who practically lives in Terminal) if he had any way of modifying that limit, but he reminded me that if their printing services are set up to bind books and bill for only 99 pages, fooling the application might be useless if the service only prints me a 99 page book and discards the additional pages.
I can understand that you wouldn't want to let people print 1000 page books, but I sent feedback anyway to allow me to increase the limit. Anyone know of any service that lets you print beyond iPhoto's limits?

Font Size changing when I reply to an email from a coworker only

I am having a problem. Typically when I reply to an email, all font sizes and colors are exactly how they are supposed to be. However, there is one person that the font size and font style changes everytime I reply.
Please tell me how to fix this to match everything else.
Thanks.

Hi,
As this issue seems mostly related to mailing (Exchange part) you can place your question in our Exchange Forum as they can solve your issue in more appropriate way. For your convenience here placing the link for
Exchange Forum.
Thanks for your Understanding & Support!
Regards.

Font size changes when pasting ito new layer

Since I updated Phothoshop to CC a strange error occures. When I copy text from one layer and paste it into a new layer the font size changes. I have tried resetting the texttool but this has no effect. Does anybody know what the solution to this problem can be?
OS 10.9.4, CC 2014

This should not happen.
Try duplicating the layer with Ctlr + J...

Error when running "J2ee SDK" - j2ee server

Hi,
When running: C:\j2sdkee1.3.1\bin>j2eeadmin I get the follwoing error:
Binding: < JMS Cnx Factory : TopicConnectionFactory ,
Binding: < JMS Cnx Factory : QueueConnectionFactory ,
Starting web service at port: 8000
Starting secure web service at port: 7000
J2EE SDK/1.3.1
LifecycleException: null.open: java.net.BindExcepti
JVM_Bind
at org.apache.catalina.connector.http.HttpCon
ctor.java:1116)
at org.apache.catalina.startup.Embedded.start
at com.sun.web.server.WebService.start(WebSer
at com.sun.web.server.WebServer.start(WebServ
at com.sun.enterprise.server.J2EEServer.start
796)
at com.sun.enterprise.server.J2EEServer.run(J
at com.sun.enterprise.server.J2EEServer.main(
java.lang.RuntimeException: null.open
at com.sun.enterprise.server.J2EEServer.run(J
at com.sun.enterprise.server.J2EEServer.main(
J2EE server reported the following error: null.open
Error executing J2EE server ...
Please advise.
Thanks,
Gabi

405 errors in the HTTP cycle
Any client goes through the following cycle:
* Obtain an IP address from the IP name of your site (your site URL without the leading 'http://'). This lookup (conversion of IP name to IP address) is provided by domain name servers (DNSs).
* Open an IP socket connection to that IP address.
* Write an HTTP data stream through that socket.
* Receive an HTTP data stream back from your Web server in response. This data stream contains status codes whose values are determined by the HTTP protocol. Parse this data stream for status codes and other useful information.
This error occurs in the final step above when the client receives an HTTP status code that it recognises as '405'.
Resolving 405 errors - general
405 errors often arise with the POST method. You may be trying to introduce some kind of input form on your Web site, but not all ISPs allow the POST method necessary to process the form.
All 405 errors can be traced to configuration of the Web server and security governing access to the content of the Web site.

How to change report displayname at runtime when run from the report server?

hi all,
with the reportviewer widget in a winforms app, i'm able to change report displayname at runtime by handling thesubmittingparametervalues event like so:
        private void reportViewer1_SubmittingParameterValues(object sender, ReportParametersEventArgs e)
            string po = e.Parameters["Order"].Values[0];
            this.reportViewer1.ServerReport.DisplayName = "Load Out - " + po + " - " + DateTime.Now.ToShortDateString();
question: how do i achieve the same thing when the report is run via the ssrs reportserver website?
thanks for any tips,
sff

Hi sherifffruitfly2,
According to your description, you want to change the display name of report in Report Manager. Right?
In Reporting Services, we can't make the report file name dynamically. But we have Build-in Fields to show report name and execution time in a report. We can add a textbox and put in the expression below:
="Load on- "+Globals!ReportName+" "+Globals!ExecutionTime
It will show the report name with execution time when we run the report:
Reference:
Built-in Collections in Expressions (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Report Generation Toolkit error when running exe not vi

Unknown System Error in Get Report Settings.vi->Get Current Font.vi->Excel Easy Table (str).vi->insert table and save file.vi->80x test suite.vi
1. The above is an error I get from my exe
2. I do not get this error when just running the vi.
3. On several report gen functions cohersion dots are on my refnum input. Is this the cause of my problem with the exe?
I guess there is an another learning curve when dealing with the app builder.
Any suggestions would be appreciated.
Thanks
Brian
CLAD
Brian

forget what i wrote. it was my vi.
funny, most of the time it aint LabVIEW causing the problem but the program itself.
Brian

Report font is changing when running it on OAS Server(Unix)

Similar Messages

Maybe you are looking for