Report for a selection of items+batch numbers that I would have had on hand

I would like to run a report for a selection of items and batch numbers that I would have had on hand (only) for September 30th. I have run the batch numbers report but this gives me all transactions from August 1/09 to September 30/09.

Hi
If you need to know quantity onhand ,probably you need to run query against OINM tables but If you are lloking for information then I guess this batch and serial number would be handy ....
Hope this helps
Bishal

Similar Messages

Standard report(for open PO order items) with estimated Delivery dates

hi friends
i would like to know if there is any standard report(for open PO order items) with estimated Delivery dates on it.
thanks
alahari

ME2M (by material)
ME2L (by vendor)
ME2N (by number)
Use selection parameter WE101 for open GR
and scope of list EINT (scheduling lines)

How do I print a contact report for a select group?

How do I print a contact report for a select group?

You should be able to select the group instead of all contacts. Older article.
Contacts – Print Contact Information

Delivery doc creation for a selected line item of the Sales order

Hi folks,
Can any one help me in how to create a delivery order for a selected line item of the Sales order.My requirement is the request comes from the web browser where a sales document and details of the items are shown the user select one line item and request for delivery create of that particular SO doc.I have used couple of FM to create delivery but the delivery create is depend on the schedule line dates so iam unable to figure out where exactly i can distinguish between the line items.
Example:
SO:- 11193645
Line item -1 has 2 schedule line 06/11
06/13
Line iteam-2 has 1 schedule line 06/12
so if i try to create Delivery doc for date 06/12
it creates partially for line 1 and line 2.
but my requirement is i wanted to create SO for only line item 1 as i wanted to process Del Doc for only line item 1.
If you have any idea please help me.

hi ,
You can develop a customised FM to process the Idoc data .
1. Read the Idoc data into internal table for the line items which need to be delivered .
2. Run BDC for transaction 'VL01N' ( delivery creation ) through which eliminate the line items which are not in internal table and save the delivery document
Note : Because in VL01N , you specify the sales document with respect to which you want to perform delivery hence automatically all items are copied to the delivery document .
During BDC recording , select items by " MOVING TO TOP"
and then deleting the selected item
If you face problem in BDC recording , i can help u that too .

Calendar...list function shows only events for date select instead of events from that date forward.

Calendar list function shows only events for date selected....instead of events for date selected and events forward from that date. Is there a setting change needed? Help!

Hi,
Did you check that your universe object referring "Date of Completion" has Date data type?
Can you also provide the BOE verson you are using?
I remembered that the calendars were not displayed in XIR2 version.
Didier

I am no musician, but have owned an iMac now for around four years. During that time I have had Garageband installed. I have dipped in and out very occasionally as I would like nothing more than to be able to get my head around it just for my own amusemen

I am no musician, but have owned an iMac now for around four years. During that time I have had Garageband installed. I have dipped in and out very occasionally as I would like nothing more than to be able to get my head around it just for my own amusement really. I would at least like to be able to record my electric guitar with loops and tracks etc, just try to be a bit creative and see what comes out. The problem that I have is that perhaps its me, but every time I try to get to grips with this software, I just can't seem to get my head around it, even to begin to do something. I have now recently downloaded 10.0.2 which is confusing in itself, as, as far as I can ascertain that is actually version 11, but I'm not even sure about that. I have also recently purchased a Rocksmith RealTone Cable to connect my guitar. I can sometimes get a sound come out, but nothing to brilliant. And every time I try to set something up, it just doesn't seem to work out. I end up hitting buttons and controls in the simple hope that I may hit the correct control in order to get some sort of result. But I'm kind of fumbling in the dark with this. I have trawled the Internet just trying to find either a good manual or video tutorials for absolute beginners, but there just simply doesn't seem to be anything of that nature out there and what there is appears always to be very sketchy and not particularly detailed in explaining anything properly, and so I always find myself seemingly jumping in with both feet and just struggling to try and find a foothold with this on how to really begin. It is so frustrating as I can see the fantastic potential of this software, but just can't understand how to use it properly. If there is anyone out there who may be able to offer me some advice with this, I would be most grateful indeed... Many Thanks.

I have now recently downloaded 10.0.2 which is confusing in itself, as, as far as I can ascertain that is actually version 11, but I'm not even sure about that.
Version 10.0.2 is the newest version and the successor to GarageBand '11 (version 6.0.5).
The '11 is referring to the iLife '11 suit of multimedia application - the older GarageBand was a part of this bundle.
Have a look at Edgar's graphical enhanced manuals, the explain very detailed how things work and why. You can buy them as iBooks from the iBook store or directly from the page:
http://DingDingMusic.com/Manuals/

Standard Report for Payment Proposal:Open Items

Hi all
Is there any standard report for to display Payment Proposal:Open Items?
I know we can see them in F110 but I am wondering if there's other related report.
Thanks in advance.
az

Hi,
Check following report. it may help you
S_P99_41000099 - Payment List
Regards,
Jigar

Report for G/L line items with both debit & credit posting accounts

Hi,
My client requires a G/L line items report. It can be possible thru fs10n or fbl3n etc. But he wants to see both the credit and debit accounts in the same line.
for ex: if I open a expense account and show the report of individual documents, he wants to see the corresponding credit item to which bank/cash account it got credited to.
we showed them to double click on that document and goto document overview. but they dont want in that way.
they want to see all the line items with both postings in the same sheet for all line items.
valuable replies will be fairly rewarded.
thanks,
chaitanya

Hi,
U can use the following TCodes...
- S_ALR_87012287
- S_ALR_87012289
- S_ALR_87012291
But i am not sure if your client will be happy...
This is a very common req and the only solution possible is to have a customized report for the client..
Hope its clear..
Cheers
Raghu

How do I get the list index for the selected list item

How can I obtain the list index for the currently selected
element in a list item? I'm trying to move the label and value
from on list box to another by using the add_list_element built-
in and it requires the list index.
Thanks for your help...

Hi,
You can`t get the Index for the selected item..
you can get the Value of then Tlist using :Block.ListName .
maybe theis code will help you..
PROCEDURE pr_PasarElementos(ls_Origen           varchar2,                    ls_destino          varchar2,          cValor                    varchar2 default null) IS
     nCont_Orig     number := 0;
     nCont_Dest     number := 0;
begin
nCont_Orig := GET_LIST_ELEMENT_COUNT(ls_Origen);          nCont_Dest := GET_LIST_ELEMENT_COUNT(ls_destino);
     Add_List_Element(ls_destino,nCont_Dest+1,cValor,cValor);
     for rec_Orig in 1..nCont_Orig loop
     if GET_LIST_ELEMENT_VALUE(ls_Origen,rec_Orig) = cValor then
     delete_list_element(ls_Origen,rec_Orig);
     end if;
     end loop;
end;
you can call the procedure with :
pr_pasarElementos('control.ls_activos','control.ls_inactivos',:CONTROL.ls_activos);
here I`m working with the Value equal to the Label... you would need to look for the Label of the origin (ls_Origen) list using the Value (cValor) you already have.
I hope this help you.

Can I change my call picture to something different then the lock screen for numbers that don't have a photo assigned?

Hi,
I have Picture A set as my lock screen picture and certain people in my contacts have a picture assigned to them. However, I would like to assign Picture B to all other callers as well as have numbers not in my contact list come up as Picture B.
Is there a way to do this other than just assigning Picture B to ALL other contacts? Because that still wouldn't work for numbers that call me/I call that are in my my contact list.
Thanks,
P

It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.

Report for GR/IR line items - with PO details - profit center wise

Hi
My client uploaded stock and instead of using MIRO, directly passed the journal entry
Consumption
To Vendor
Now, the original entry of
Stock
To GR/IR
remains.
How can I make the GR/IR account nil and also remove the open items in the corresponding Purchase Order ?
Thanks in advance.

Hi,
You can use a substitution to update the field through FI. Use GGB4 for wirting a substitution you may need some ABAP coding to substitute PO no and line items in the assignment field. rule would be Co code =XXX and GL account =xxx and Posting date earlier than =xxxx then concatenrate EBELN and EBELP in Assigment field Zounr.
Then execute FBL3N and edit the assignment field by selecting all the documents and then save it you should see the PO line items populated. You can leave the substitution on or you can remove it after updating,
Regards
K.R

Is it possible to create a report for script selections?

I am using UCCE version 8.5 and programming with Internet Script Editor. I would like to know which options callers are selecting in my script. I know how to do this by monitoring the script. I would like to have it captured in a report so that I do not have to remain logged in while monitoring the script. I can get the information for the skill group from CUIC. The information I am looking to capture happens in the script before it gets to the skill group.
Thanks,
Dale

Maybe I am not understanding your question, the simple answer is Call Types, one of the functions of Call Types is to obtain call counts through various paths in the script. You do want to be careful with where you place Call Types in your script, Call Types are used both for Call counts and Service Level calculations.

Inventory report for the selection of requisitioner and MRP controller

Hello Experts,
Can someone please help me with a standard Inventory report in which we can give input thr requistioner and MRP controller
regards,
YK

Hi,
You will get the requisition no. from EKKO (provided PO has been created otherwise you won't get any record). Find out PO & item no. for the requisition item. Then you can check EKBE table whether GR has been posted or not. If GR has not been posted then there won't be entry in EKBE for that PO & item.
Regards,
Rakesh

Report for conditions per line item in Billing document

Hi all,
Is there any report that can tell me all the price conditions that are allocated to a billing document line item? I am talking about the actual conditions relevant for a line item, not only conditions that have a condition record setup.
So I would like to key in billing document number, the line item and get a report of all conditions that are allocated to that line item in the specific billing document.
If there is no such standard report, does anyone know what tables to link?
Thanks in advance,
Lars

Hi,
Tables VBRK and VBRP. And with field VBRK-KNUMV go to table KONV to obtain the data of all conditions.
Regards,
Eduardo

Hey, I don´t know why or what but while I was using my mac, the icloud locked my mac and now asking for a PIN lock with 4 numbers that I never set up before... What a need to do to fix it??

Hey I just want to use my mac but I can´t sign up it because asking me for a PIN LOCK that I don´t have any idea...
Case ID: 471327240

If your Mac was locked with Find My Mac, you'll have to take it to an Apple store or authorized service provider to have it unlocked. You will need to bring the necessary paperwork to prove that it is yours. From http://support.apple.com/kb/TS4006:
"Only Apple retail stores or Apple Authorized Service Providers can unlock computers protected by a firmware password, such as passwords set with Find My Mac.
If you cannot remember the firmware password for your computer, schedule a service appointment with either an Apple Retail Store or an Apple Authorized Service Provider. If you plan to visit an Apple Retail store, make areservation at the Genius Bar (only available in some countries)."

Report for a selection of items+batch numbers that I would have had on hand

Similar Messages

Maybe you are looking for