Report for CCMS Monitoring

Hi experts,
Can anyone tell me how to configure reports after the CCMS Monitoring?
Thanks.

Hi,
can u look these links
http://it.toolbox.com/wiki/index.php/Setup_Sapconnect_Email_for_RZ20
http://help.sap.com/saphelp_nw70/helpdata/en/e5/5d1741b393f26fe10000000a1550b0/content.htm
regards,
Srinu

Similar Messages

"No CEN system configured for CCMS monitoring" message

Hello,
When I want to use the reports option on central mode I receive this message:
"No CEN system configured for CCMS monitoring"
Can someone please guide me through this configuration?
Thank you in advance,
Roy

Hi Roy,
Monitoring Setup Guide will tell you how to setup CEN
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f30e51-0a01-0010-f59a-fecea2b95b2c
Regards
Juan
Please reward with points if helpful

SL Reporting for individual Monitoring objects (CPH)

Hi SLR-experts,
I would like to set up the SL Reporting for individual Monitoring objects (CPH).
I already done following:
Tcode RZ23N: Setting up a collective and reorganization schema
Tcode RZ23N: Assign a collection and reorganization schema
Unfortunately I cannot choose these objects in DSWP Setup and of course I cannot see any data in SL Report.
Can some one help with this problem?
Thank you
regards
Thom

in 2010 also it is not working, I see that your post is in 2008. let me knowif you found any resolution for this issue

What role is needed for CCMS monitor sets changing permission?

Hi Gurus,
do you know the answer?
Thank you,
Olian

Hi,
Could you please tell me which CCMS monitor you are dealing with?

Error in CCMS monitoring Batch job SAP_CCMS_MONI_BATCH_DP.

Hi All,
I am using a Sanbox system for CCMS Monitoring activities. I assigned a method CCMS_ONAlert_Email under auto reaction to the MTE class ABAP shortdumps on node System errors. So the requirement is when an alert triggered i have to receive an alert email. I just found there is an error in Batch job created for Alert monitoring, please find the error details mentioned below. Please let me know how to solve this error
Job started
Step 001 started (program RSAL_BATCH_TOOL_DISPATCHING, variant , user ID NBKIPXP)
:Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
: Kernel Error ID:
: SYSID: ES1
: SY-SUBRC: 1208
: Message: ADBC error
: SQL statement: SELECT '20110613075617',0 as DB6PMCF_PARTITION,FS_NAM
: E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
: SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/sapdata1')
: ) AS FS_CONFIG
: Database:
:caused by
:Exception CX_SQL_EXCEPTIONin class CL_SQL_RESULT_SET
: Kernel Error ID:
: DB Error: Yes
: SQL Code: 444-
: SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
: B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
: /exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
: on code: "4". SQLSTATE=42724
: DB Object Exists: No
: Duplicated Key: No
: Internal Error: 1
: Invalid Cursor: No
: Unknown Connection: No
: Connection Closed: No
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
:Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
: Kernel Error ID:
: SYSID: ES1
: SY-SUBRC: 1208
: Message: ADBC error
: SQL statement: SELECT '20110613075633',0 as DB6PMCF_PARTITION,FS_NAM
: E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
: SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/log_dir/NO
: DE0000/') ) AS FS_CONFIG
: Database:
:caused by
:Exception CX_SQL_EXCEPTION in class CL_SQL_RESULT_SET
: Kernel Error ID:
: DB Error: Yes
: SQL Code: 444-
: SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
: B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
: /exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
: on code: "4". SQLSTATE=42724
: DB Object Exists: No
: Duplicated Key: No
: Internal Error: 1
: Invalid Cursor: No
: Unknown Connection: No
: Connection Closed: No
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
:Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
: Kernel Error ID:
: SYSID: ES1
: SY-SUBRC: 1208
: Message: ADBC error
: SQL statement: SELECT '20110613075633',0 as DB6PMCF_PARTITION,FS_NAM
: E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
: SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/sapdata4/d
: b2es1/NODE0000/ES1/T0000003/C0000000.TMP') ) ASFS_CONFIG
: Database:
:caused by
:Exception CX_SQL_EXCEPTION in class CL_SQL_RESULT_SET
: Kernel Error ID:
: DB Error: Yes
: SQL Code: 444-
: SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
: B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
: /exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
: on code: "4". SQLSTATE=42724
: DB Object Exists: No
: Duplicated Key: No
: Internal Error: 1
: Invalid Cursor: No
: Unknown Connection: No
: Connection Closed: No
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
:Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
: Kernel Error ID:
: SYSID: ES1
: SY-SUBRC: 1208
: Message: ADBC error
: SQL statement: SELECT '20110613075634',0 as DB6PMCF_PARTITION,FS_NAM
: E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
: SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/sapdata2/d
: b2es1/NODE0000/ES1/T0000003/C0000001.TMP') ) ASFS_CONFIG
: Database:
:caused by
:Exception CX_SQL_EXCEPTION in class CL_SQL_RESULT_SET
: Kernel Error ID:
: DB Error: Yes
: SQL Code: 444-
: SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
: B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
: /exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
: on code: "4". SQLSTATE=42724
: DB Object Exists: No
: Duplicated Key: No
: Internal Error: 1
: Invalid Cursor: No
: Unknown Connection: No
: Connection Closed: No
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
:Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
: Kernel Error ID:
: SYSID: ES1
: SY-SUBRC: 1208
: Message: ADBC error
: SQL statement: SELECT '20110613075634',0 as DB6PMCF_PARTITION,FS_NAM
: E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
: SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/sapdata1/d
: b2es1/NODE0000/ES1/T0000003/C0000002.TMP') ) ASFS_CONFIG
: Database:
:caused by
:Exception CX_SQL_EXCEPTION in class CL_SQL_RESULT_SET
: Kernel Error ID:
: DB Error: Yes
: SQL Code: 444-
: SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
: B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
: /exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
: on code: "4". SQLSTATE=42724
: DB Object Exists: No
: Duplicated Key: No
: Internal Error: 1
: Invalid Cursor: No
: Unknown Connection: No
: Connection Closed: No
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
:Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
: Kernel Error ID:
: SYSID: ES1
: SY-SUBRC: 1208
: Message: ADBC error
: SQL statement: SELECT '20110613075634',0 as DB6PMCF_PARTITION,FS_NAM
: E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
: SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/sapdata3/d
: b2es1/NODE0000/ES1/T0000003/C0000003.TMP') ) ASFS_CONFIG
: Database:
:caused by
:Exception CX_SQL_EXCEPTION in class CL_SQL_RESULT_SET
: Kernel Error ID:
: DB Error: Yes
: SQL Code: 444-
: SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
: B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
: /exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
: on code: "4". SQLSTATE=42724
: DB Object Exists: No
: Duplicated Key: No
: Internal Error: 1
: Invalid Cursor: No
: Unknown Connection: No
: Connection Closed: No
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
:Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
: Kernel Error ID:
: SYSID: ES1
: SY-SUBRC: 1208
: Message: ADBC error
: SQL statement: SELECT '20110613075634',0 as DB6PMCF_PARTITION,FS_NAM
: E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
: SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/sapdata3/d
: b2es1/NODE0000/ES1/T0000004/C0000003.UTM') ) ASFS_CONFIG
: Database:
:caused by
:Exception CX_SQL_EXCEPTION in class CL_SQL_RESULT_SET
: Kernel Error ID:
: DB Error: Yes
: SQL Code: 444-
: SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
: B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
: /exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
: on code: "4". SQLSTATE=42724
: DB Object Exists: No
: Duplicated Key: No
: Internal Error: 1
: Invalid Cursor: No
: Unknown Connection: No
: Connection Closed: No
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
:Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
: Kernel Error ID:
SYSID: ES1
SY-SUBRC: 1208
Message: ADBC error
SQL statement: SELECT '20110613075634',0 as DB6PMCF_PARTITION,FS_NAM
E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/sapdata4/d
b2es1/NODE0000/ES1/T0000004/C0000000.UTM') ) ASFS_CONFIG
Database:
caused by
Exception CX_SQL_EXCEPTION in class CL_SQL_RESULT_SET
Kernel Error ID:
DB Error: Yes
SQL Code: 444-
SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
/exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
on code: "4". SQLSTATE=42724
DB Object Exists: No
Duplicated Key: No
Internal Error: 1
Invalid Cursor: No
Unknown Connection: No
Connection Closed: No
xception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
Kernel Error ID:
SYSID: ES1
SY-SUBRC: 1208
Message: ADBC error
SQL statement: SELECT '20110613075634',0 as DB6PMCF_PARTITION,FS_NAM
E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
: SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/sapdata2/d
: b2es1/NODE0000/ES1/T0000004/C0000001.UTM') ) ASFS_CONFIG
: Database:
:caused by
:Exception CX_SQL_EXCEPTION in class CL_SQL_RESULT_SET
: Kernel Error ID:
: DB Error: Yes
: SQL Code: 444-
: SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
: B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
: /exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
: on code: "4". SQLSTATE=42724
: DB Object Exists: No
: Duplicated Key: No
: Internal Error: 1
: Invalid Cursor: No
: Unknown Connection: No
: Connection Closed: No
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
:Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
: Kernel Error ID:
: SYSID: ES1
: SY-SUBRC: 1208
: Message: ADBC error
: SQL statement: SELECT '20110613075634',0 as DB6PMCF_PARTITION,FS_NAM
: E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
: SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/sapdata1/d
: b2es1/NODE0000/ES1/T0000004/C0000002.UTM') ) ASFS_CONFIG
: Database:
:caused by
:Exception CX_SQL_EXCEPTION in class CL_SQL_RESULT_SET
: Kernel Error ID:
: DB Error: Yes
: SQL Code: 444-
: SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
: B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
: /exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
: on code: "4". SQLSTATE=42724
: DB Object Exists: No
: Duplicated Key: No
: Internal Error: 1
: Invalid Cursor: No
: Unknown Connection: No
: Connection Closed: No
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
Job finished

Hi Dinesh,
Please check the note is applicable for you [Note 978319 - DB6: Incorrectly cataloged table functions|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=978319]
so please check wheter db2<sid>user has enough permission
Thanks,
Jansi

BPM - Requirement for CCMS Setup?

Hi all,
In the BPM setup guide, it says: "The Computing Center Management System or CCMS Alert Monitor (transaction /nrz20) provides the underlying monitoring infrastructure for Business Process Monitoring."
Is there any further information on exactly what CCMS Setup is required at a minimum in the Solution Manager and in the Monitored system for BPM to function correctly?
I read the technical prerequisites which are described in SAP notes 784752 - "BPMon in SAP Solution Manager - Prerequisites" and 521820 - "Availability of Business Process Monitoring". The first note does not reference CCMS, and the second one only makes reference to it if you want to use "CCMS Monitors" in BPM.
Thanks for any guidance on this,
Regards,
John

Hi JD
To use CCMS monitoring in BPMon, 1st, please implement Note 1293668 as described in Note
521820. This note fix the problem of CCMS monitoring related problem.
>Description of note 521820
>(d) CCMS Monitor
>If you plan link any CCMS monitors from the managed systems into
>Business Process Monitoring implement SAP Note 1293668.
About the procedure, you just need to copy and past MTE from RZ20 of related system.
In more detail, please refer to the document in below.
http://www.service.sap.com/bpm
->Technical information
->->Setup Guide - Interface Monitoring
Page 78 describe the steps on CCMS monitoring setup.
(Originally this description is for one of the monitoring topic for PI area.
Create MTE for PI and by using CCMS monitoring of BPMon, include the MTE to the BPMon.
But the page above exactly describe the step that you need to do for CCMS monitoring.
This apply for your case as well).
Best Regards
Keiji Mishima

Ccms monitoring single definition under and MTE class

Hi Guys
For CCMS monitoring under RZ20 i am looking for a way to define a node that allow me to monitor a specific definition for those mte that dinamically create those definitions from the source system, for instance
if you select MTE class: filesystem you get the list of all the filesystems, like
/db2/SM1/sapdata1
/db2/SM1/sapdata2
/var
So lets says I just want to monitor /db2/SM1/sapdata1 and not to display the rest of the filesystems on RZ20
is there a way to configure this? maybe using some kind of filter for the name.
I want to configure this for the j2ee connector service but i get a buch of connector Applications RZ20 and I just want to monitor one of those Applications
Thanks for your help.

Thanks for this good document but I think it is not enough for me. I had registered the sapccmsr agent with J2EE option but it is not monitor the database correctly on the same physical server. In the Monitoring node of server process in Visual Admin i can't find a relevant object to activate database free space monitoring. In posted document I can't find the detailed information, too. Please provide me with a detailed specific information. Many thanks.
Which service is relevant to collect database relevant data to monitor non ABAP databases like single J2EE instances oder non-SAP Databases.
Edited by: Rene Schulz on Nov 19, 2008 3:16 PM

CCMS Monitoring of Java Engine

Hi Guys and Girls,
I have configured a central system for CCMS monitoring.
I am able to see the paramters for abap part.
I have uploaded a J2ee scenario and it is running in GRMG Tcode. I have also activated ccms service in SICF.
But i am unable to see my java server nodes in RZ20 -> j2ee template monitor set.
The j2ee template looks like this.
Allsystem
-> <SID>
      |
      -> J2EE Engine
      -> J2EE Applications
      -> J2EE Logfiles
    +-> CCMS Selfmonitoring
   + ->Operating System
I can see parameter details for CCMS Selfmonitoring and Operating System.
But J2EE Engine, Applications and Logfiles and just there with no sub nodes.
am i missing some setting. Request your help on this.
Thanks and Regards,
Raghavan

Hi Raghavan,
Can you please check the note 1065754 as this can cause similar problems to what you have. Can you also check the following
CCMSPING is able to monitor if a system is accessible and if the instances are up and running (ABAP and JAVA instances)
GRMG is able to monitor if a HTTP application is up and running.
You have to install the SAPCCMSR agent to view the J2EE monitor information via the RZ20 transaction in the ABAP system
You have to install SAPCCM4X agents, to improve the CCMS monitor concept or for additional monitor functionality like using central auto-reaction methods or log file monitoring.
The J2EE availability didn't work because the old CCMSPING functionality was still used. All the systems in the availability configuration in the transaction RZ21 may be using the RFC destination "CCMS_SYSTEM_PING_
Can you change this to the new agent.
And after this please re-initialized the whole availability structure by executing the function module
SCSM_AVAILABILITY_STARTUP_METH one time manually in the transaction SE37 and activate the new CCMSPING technology in your system.
First of all I think the problem is related to the availability and you don't need the sapccm4x agent or sapccmsr to have the availability alerts in RZ20. If you want to extend this functionality, let's say
you want to get email alerts whenever one of your system is down you should install the sapccm4x agent for ABAP or sapccmsr for non-ABAP.
We have to focus only on ccmsping at this stage.
The ccmsping program (agent) only exists as Non-Unicode version and is able to work with Unicode and Non-Unicode instances.After registering the ccmsping agent it is necessary to restart the instance (or at least to reset the monitoring segment into warmup status) so the startup method for availability monitoring is able to
determine if there is an agent running registered with push option or not, because in this case other function modules have to be used.
Once check whether ccmsping is working fine?
If you get the error message when you check ccmsping like Message No. RA100
This message means 'Neither instance nor logon groups found' and it means that the ccmsping registration wasn't successfull.
its better to register with the newest version of ccmsping as per note 1013331 CCMS agents and kernel: Patches 2007
Also PLease review the Note 1065754
I hope the above helps you.
Thanks & Regards,
Pradeep Srigiri

CCMS is used for system monitoring , why should we use solution manage ?

CCMS is used for system monitoring , why should we use solution manage ?
Whats the relationship between CCMS system and SolMan?
Thank you .

hi,
I just want to ask a question. At our client we have solution manager and CCMS. There is data in CCMS I can extract, it is loading on BW side ok the same number of recs, but the problem on CCMS cubes says there are the same number of record in the cube and also showing as the data is ready for the reporting. But when I run the report and view the data as listcube it is empty.
ANy of you have the situation like this cube say it has the data but when do th BEX or infocube contents the cube is empty nothing in there. The same thing is happening with hourly, 15 minute and daily cubes.
Anyhelp on this matter is appreciated

Reporting and Report tools for CCM

Can anyone point me in the right direction or give me some suggestions on reporting in CCM. To be a little more specific; for example if a few users complain they are tryin to make outbound calls, and getting a busy signal, is there any reporting tool that I can use to pinpoint the problem or eventually be able to say, hey we need another phone line, etc...
Also. User calls can complains that the calls they are making lack in quality, how do I report on this or research?

In order to determine if there are any records in the Structured Query Language (SQL) database, complete these steps:
Choose Start > Programs > SQL > Enterprise Manager > Microsoft SQL Servers > SQL Server Group.
Choose Publisher Server > Databases.
Choose CDR > Tables. Right-click the CallDetailRecord table.
Choose Open Table > Return All Rows. Determine if there are any records.
If many records appear, complete this procedure to remove records from ART:
Choose Programs > SQL Server > Query Analyzer. Log in and choose ART database.
Run these queries:
delete from Tbl_Load_History
delete from Tbl_Dump_PkID
delete from Tbl_Error_Id_Map
delete from Tbl_Billing_Data
delete from Tbl_Billing_Error
delete from Tbl_Dump_CallDetailRecord
delete from Tbl_Dump_CallDetailRecordDiagnostic
This forces ART to get all the old CDRs into ART in the next scheduled loading time. By default, CDR data is loaded every day from midnight to 5 a.m.
Restart the CDR Insert and DBL Monitor Services from CCM Administration > Application >Cisco CCM Serviceability >Tools > Control Center.
Refer to the How can I manually purge the ART database? section of CallManager Issue Resolution with CDR and ART FAQ for more information.
Note: Information deletes from the ART database but not from the CDR.
Note: If you do not see any records, there are no CDR entries for that time and date range. Determine if conditions are met for CDR generation. CDR records are generated in these circumstances:
The service parameters CdrEnabled and CallDiagnosticsEnabled are set to True.
The call is established and has a talk duration greater than 0.
The call fails and has a cause code that reflects the error.
In order to set the service parameters, choose Service > Service Parameters, and make sure that the service parameters CdrEnabled and CallDiagnosticsEnabled are set to True in all of the Cisco CallManager servers, both publisher and subscriber.

Setup and configuration for system monitoring and IT Reporting for Java sys

Hi all,
How to setup and configuration for system monitoring and IT Reporting for Java system ?
How to connect Java system to Solman system?
Regards,
Neni

HI,
What is your OS? You can use SAPCCMSR.exe to monitoring IT Reporting Java system on Solman.
Go to solman rz21 create a csmreg user. and configuration fil for agent. copy configuration fil on usr/sap/ccms/..
Go to comman line cd ../user/sap/xxx/sys/exe/.../ wite SAPCCMSR.00 -R pf=< ...../sys/profile/instans profile> .
You can se agent on rz10 and use this connaction on rz20 to monitoring and IT Reporting Java system on Solman.
I hope this help

Report with all monitors & their threshold for a server for SCOM 2007 R2

Hi,
I need a report with all monitored monitors & rules with their effective threshold for SCOM 2007 R2. I tried few scripts & tools mentioned on different blogs, but not getting anything.
Any help in this regard would be highly appreciated.
TIA

This would be a custom report, which is not available to my knowledge. You need to consider overrides, and this is the crux of the situation. What you can do is open the pack in MPViewer, and export the pack which will contain the thresholds. And you could
also create an override view, in My Workspace, based on the pack you are interested in.
Otherwise, it will be a custom TSQL query or stored procedure, that you may incorporate into your custom report.
Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)

CCMS monitoring for adapter engine

Hi,
We have configured CCMS monitoring for Adapter Engine for our client.
In RZ20 im able to see the alerts come up,with the default data that the system provides.
1. I need to send a mail when the alert is triggerred, but if I try to set the autoreaction method, it is greyed out and I get a info saying that the adpter engine node cannot be changed. How do I get over this?
2. Incase im able to set the autoreaction method , I want to send additional information like communication channel name etc in the alert message. How can I change the text in the alert email?
Thanks
Shakthi

Hello!
Please check the blog entry below
Configuration for forwarding Alerts as Emails
Configuration for forwarding Alerts as Emails

Configuring CCMS alerts for Availablity Monitoring

Hi All,
We are in the process of configuring availablity monitoring in central system (solution Manager 7.0 with SP stack 23) to monitor all systems (ABAP,Java,Dual Stack, Trex,DMS,etc) in landscape.
As a first step, we have registered CCMS agents in monitored (ABAP) system and connected to central system (Solman)
All the required RFCu2019s have been defined for data transfer between monitored and central system
In RZ20,i could see the availablity as 100% for the defined moniored system under SAP CCMS Technical Expert Monitors>All Contexts on Local Application Server>CCMS self monitoring >CCMS agents>CCMSPING.hostname
Not sure whether above path is the place where in we look for alerts
Please clarify the below points
i) how to configure the email alerts (in RZ20) from the central system when monitored system is down
ii) the path in which I can find the alerts in RZ20 for that monitored system or how to add the monitored system incase if that doesnt exists
iii) MTE class under which analysis, auto reaction method to be assigned ?
iv). data collection method and frequency
v). Which MTE class to be used to assign the Autoreaction method (CCMS_test_mail alredy defined)
Appreciate your quick response on this
Thanks,
vadi

Hi All,
Thanks a lot for your reply.
Still i m having an issue in handling the RZ20 alerts managemnent
In RZ20,
i) i able to see the added monitoried system id under the node CCMS Monitor templates>Availablity & performance overview>Availablity-->monitored sys id
ii) When i click on open staus for the above node turns to green color
ii) when i click on current status the node turns to grey color
I am not sure whether the data collection is being passed since it doesnt turn red when the system is down
However the dispatching jobs are active in both CEN and monitored (000 client) systems
Appreciate your response
Thanks,
Vadi

CCMS monitoring for SAPconnect based on Error Message Numbers

Hi,
We are trying to use the CCMS monitoring to produce alerts for SAPconnect based specific Error Message Numbers for emails for example, however the monitoring function or data collection method for SAPconnect (BCOMAL_SXDS) does not provide that level of granularity. Has anybody faced this same problem and can provide a recommendation for this?
Thanks,
Javier

Hello,
You can see the message details in SE91.
In FI, you can control the message number in OBA5. Normally message numbers are issued like this
AA165
First two digits (alpha) is called application area next digits are called message number.
Sometimes, you may not be able to see the messages in OBA5, in such case you need to go to OBMSG transaction code and include the message number to your application area, then you need to come to back to OBA5 to make it information / warning / switch off / error (as the case may be)
Regards,
Ravi

Report for CCMS Monitoring

Similar Messages

Maybe you are looking for