Report for collect statistics of scenarios in PI

Hi colleagues,
I would like to know if there is any specific report i can execute in my box (PI 7.1) in order to get statistics regarding:
Number of messages per scenario
Average message size per scenario
Ellapsed time
Etc
The aim is to prepare a document in which we can analyze how the system grows and which scenarios cause this growth, week after week.
I have gone over the processes EWA carries out and got nothing, couldnt execute the reports i found there.
I know I can get some of this info by means of Performance Monitoring, but i need to be able to collect all this data.
Is there a report i can use for this purpose?
Please, any help will be much appreciated.
Best regards,
David

Thanks all for your valuable input,
however that makes me realise there is no way to gather this info (scenario specific) without writing some code, am i correct?
Does anybody of you know how SAP manage the data they collect from PI through EWA tasks? Despite slight differences, this is what i want to get.
Any clue?
Thanks a lot in advance and best regards!
David

Similar Messages

COOIS Capacity report for Collective Order

Hello Expert,
Need your help & assistance. I have an issue related to collective order, COOIS report display for list Capacity.
For one collective order, when I check this COOIS>Capacity report it display only header order detail, not for dependent order.
But for another collective order for same order type & Plant, it display for both header & dependent order.
Please find the attached word doc with screenshot for the steps I am following. Please point out the reason, that I can check so that for first order also it displays both header & dependent orders in the COOIS > Capacity list.

Case:01: Wherin COOIS>Capacity list display only show for header order not dependent order
Case 02:Wherin COOIS>Capacity list display show both for header order & dependent order
Order type & Plant is same in both cases.
For detail please check .xml attached
Regards
Piyush

Dash board report for make to stock scenario?

hi friends,
Here i am having a problem that, I need to do the dash board report to display the sales and production values (quanty s , value) with particular date comparission.
some more detailed.
my client need the report with day wise production and sales values with respective of material number. I can make the report if it is make to order situation. but , this is make to stock situation. and also mentioned that values should match the G\L Account ,ref: fs10n Transaction.
plz help out ......
rewards in advance.
Regards,
Naveen M

The definition of Organization structure might not allow you to do so
Please go throught the following link in detail http://help.sap.com/saphelp_47x200/helpdata/en/f4/7d3f9344af11d182b40000e829fbfe/frameset.htm
Summary from the above link is as mentioned below
You can plan material requirements at plant level or for different MRP areas. With MRP at plant level, the system adds together stocks from all of the individual storage locations, with the exception of individual customer stock, to determine total plant stock. The requirements are combined in the planning run and procurement elements are created for these pegged requirements with unknown sources. Individual storage locations can be planned separately or be excluded from planning.
In the case of material requirements planning on an MRP area level, only the stocks from the storage locations or subcontractor assigned to the respective MRP area are taken into account. Only the requirements in this MRP area are combined and procurement elements are created for them. This enables you to plan material requirements specifically for certain areas.

Report RMMD07EX for collective MRP list

Hi all
I want to use the collective MRP list MD04 but by defining a range of plants and multiple MRP controllers at a time. SAP recommends using a report similar to RMMD07EX. This mimics MD07. Has anybody created a report for collective MRP list using MD04
thanks

How do you plan to switch from collective display to individual ? DO you plan to agregate some figures like stock for differents materials?
Have you tried the LIS, with transactions like MCBZ? This is collective Stock/ Reqmts List !

Report for Dunning

Hi Experts,
Any one has written report for Dunning.(F150)
Scenario: transcation code F150 can't be schedule; it's runs manually by users.
we need a report same as what F150 is doing so that we can schedule in job.
if any one knows report for dunning ? I know fot he payment F110, there is a sap report progarm but not for Dunning(F150).
Can anybody suggest me ??
Thanks in advnace for the help.
Regards,
Nupur

Hi Hemanth,
Customizing:
You can go the Transaction FBMP and add your Form name as well as the Print Program name.
These would be call when ever you run the dunning Program.
From the Layoutset yuo can use the PERFORM subroutine using and changing parameters which would have the Structure ITCSY.
The Form then needs to be present in the Driover Prpgram.
Please let me know if this is useful.
Regards,
Deepak

Patch compliance report for all machines in collection

Good day to all,
We are trying to create a report in SCCM 2012 that will show us all missing updates on all computers in collection. But we would like to display in this report only patches which are really targeted to the machines in collection. Let me explain.
We have multiple deployment groups for patching (OSD, Servers, Client, Test waves...) and current issue we have with all build in reports is that you have to either select one of these deployments and then select a collections - but this will give you only
status for current group of patches, for another one you have to select different one. And if there is a report where you have to select only collection the it will show all updates which are in deployment (this is not nice as for OSD we are putting some extra
patches to the image and then these patches are shown as missing on all machines - but they will stay that way as we are not deploying them...yet). The ideal report for us will be to select the collection and then show all missing patches that are targeted
to that collection. This was accomplished by this query:
SELECT
vRS.NetBios_Name0 AS 'Hostname',
Count(DISTINCT vUI.ArticleID) AS 'Missing Patches'
FROM v_UpdateComplianceStatus vUCS
INNER JOIN v_CIRelation vCIR ON vUCS.CI_ID = vCIR.ToCIID
LEFT JOIN v_AuthListInfo vALI ON vALI.CI_ID = vCIR.FromCIID
INNER JOIN v_UpdateInfo vUI ON vUCS.CI_ID = vUI.CI_ID
LEFT JOIN v_R_System vRS ON vUCS.ResourceID = vRS.ResourceID
WHERE vUCS.ResourceID IN (SELECT vFCM.ResourceID FROM v_FullCollectionMembership vFCM WHERE vFCM.CollectionID = 'CAS00296')
AND vUCS.Status = '2'
AND vALI.Title LIKE 'SWU Workstations ENG%'
GROUP BY vRS.NetBios_Name0
ORDER BY 2
However, if we would like to add more columns, like Reboot Pending, Failed, Installed, Not Needed... then the report will start to show incorrect data, e.g. for machine which is fully patched and according to "Programs and Features - Show installed
updates" have 235 patches installed it will show only 198 patches installed and 10 missing.
It have something to do with JOINs between tables but we are at the end of ideas how to proceed further (we already checked the official documentation for SQL tables in new SCCM).
Have any of you created a report like this? I tried to Bing/Google for hours but most of the reports are for SCCM 2007 and showing incorrect data.

Almost all SU reports created for CM07, still apply to CM12.
http://www.enhansoft.com/

How can I have a collective AWR report for RAC database in 10gR2 and 11gR1?

Plz correct me here
awrrpt.sql takes the snapshot at the instance level and incase we have 5 instances we have to take 5 awr reports for a particular period.correct???
If above is true ,any wayout to collect a single collective AWR report for RAC database which includes information on all the instances in Oracle 10g R2 or 11gR1 ?
Thanks in advance
Gagan

I have never come across a way for this. though I can n't say it is not there.
But I guess it may not be feasible too becuase as we know the current AWR report contains data which is specific for one instance.
Various hit ratios, top events, instance effeciency reports.... what not ..
It would be really nice to see something is a new format where it lists values from each instance in a single report.. I guess such a thing Does not exiist as of now.

Custom Report for Asset Intelligence including Collection selection

Dear all,
I'm struggling with an custom report for doing the following thing.
I have labeled software with the custom label 3 in the Asset Intelligence.
I like to create a Report where i can Choose my Collection and then the Label that should be displayed.
Similar to the Report: Software 10A - Software titles with specific multiple custom labels defined.
But i like to choose more than one Label 3.
Does anybody have something like that? Its really complicated for me to edit that report.
Thanks & Regards
Flat

Hi,
You could post this question in SQL forum to see if someone there can edit the report.
The following document could help you to custom the report.
Getting Started with Report Builder
https://msdn.microsoft.com/en-us/library/dd220460.aspx
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Help,why brconnect do not collect statistics for mseg table?

I found "MSEG" table`s statistics is too old.
so i check logs in db13,and the schedule job do not collect statistics for "MSEG".
Then i execute manually: brconnect -c -u system/system -f stats -t mseg -p 4
this command still do not collect for mseg.
KS1DSDB1:oraprd 2> brconnect -c -u system/system -f stats -t mseg u2013f collect -p 4
BR0801I BRCONNECT 7.00 (46)
BR0154E Unexpected option value 'u2013f' found at position 8
BR0154E Unexpected option value 'collect' found at position 9
BR0806I End of BRCONNECT processing: ceenwjre.log 2010-11-12 08.41.38
BR0280I BRCONNECT time stamp: 2010-11-12 08.41.38
BR0804I BRCONNECT terminated with errors
KS1DSDB1:oraprd 3> brconnect -c -u system/system -f stats -t mseg -p 4
BR0801I BRCONNECT 7.00 (46)
BR0805I Start of BRCONNECT processing: ceenwjse.sta 2010-11-12 08.42.04
BR0484I BRCONNECT log file: /oracle/PRD/sapcheck/ceenwjse.sta
BR0280I BRCONNECT time stamp: 2010-11-12 08.42.11
BR0813I Schema owners found in database PRD: SAPPRD*, SAPPRDSHD+
BR0280I BRCONNECT time stamp: 2010-11-12 08.42.12
BR0807I Name of database instance: PRD
BR0808I BRCONNECT action ID: ceenwjse
BR0809I BRCONNECT function ID: sta
BR0810I BRCONNECT function: stats
BR0812I Database objects for processing: MSEG
BR0851I Number of tables with missing statistics: 0
BR0852I Number of tables to delete statistics: 0
BR0854I Number of tables to collect statistics without checking: 0
BR0855I Number of indexes with missing statistics: 0
BR0856I Number of indexes to delete statistics: 0
BR0857I Number of indexes to collect statistics: 0
BR0853I Number of tables to check (and collect if needed) statistics: 1
Owner SAPPRD: 1
MSEG
BR0846I Number of threads that will be started in parallel to the main thread: 4
BR0126I Unattended mode active - no operator confirmation required
BR0280I BRCONNECT time stamp: 2010-11-12 08.42.16
BR0817I Number of monitored/modified tables in schema of owner SAPPRD: 1/1
BR0280I BRCONNECT time stamp: 2010-11-12 08.42.16
BR0877I Checking and collecting table and index statistics...
BR0280I BRCONNECT time stamp: 2010-11-12 08.42.16
BR0879I Statistics checked for 1 table
BR0878I Number of tables selected to collect statistics after check: 0
BR0880I Statistics collected for 0/0 tables/indexes
BR0806I End of BRCONNECT processing: ceenwjse.sta 2010-11-12 08.42.16
BR0280I BRCONNECT time stamp: 2010-11-12 08.42.17
BR0802I BRCONNECT completed successfully
the log says:
Number of tables selected to collect statistics after check: 0
Could you give some advices? thanks a lot.

Hello,
If you would like to force the creation of that stats for table MSEG you need to use the -f (force) switch.
If you leave out the -f switch the parameter from stats_change_threshold is taken like you said correctly:
[http://help.sap.com/saphelp_nw70ehp1/helpdata/EN/02/0ae0c6395911d5992200508b6b8b11/content.htm|http://help.sap.com/saphelp_nw70ehp1/helpdata/EN/02/0ae0c6395911d5992200508b6b8b11/content.htm]
[http://help.sap.com/saphelp_nw70ehp1/helpdata/EN/cb/f1e33a5bd8e934e10000000a114084/content.htm|http://help.sap.com/saphelp_nw70ehp1/helpdata/EN/cb/f1e33a5bd8e934e10000000a114084/content.htm]
You have tried to do this in your second example :
==> brconnect -c -u system/system -f stats -t mseg u2013f collect -p 4
Therefore you received:
BR0154E Unexpected option value 'u2013f' found at position 8
BR0154E Unexpected option value 'collect' found at position 9
This is the correct statement, however the hyphen in front of the f switch is not correct.
Try again with the following statement (-f in stead of u2013f) you will see that it will work:
==> brconnect -c -u system/system -f stats -t mseg -f collect -p 4
I hope this can help you.
Regards.
Wim

Pull out Report for all configured Collection veriables in SCCM 20007

Hi All,
I have tried many ways but failed to pull out a report on collection veraiables.
It would be great, if someone could suggest how to pull out a report for all collection veriables which are configured.
Thanks
Regards, Dan

Hi,
Check if this link helps :
http://it.peikkoluola.net/2013/09/30/display-a-sccm-collection-variable-and-its-value/
~ Räjeésh M | Blog:
ScorpITs | Please remember to 'Mark as Answer' or 'Vote as Helpful' on the post that helps. It helps others reading the thread and recognizes useful contributions.

Business scenario for collective orders

Hello folks,
Can somebody explain the business scenario associated with collective orders? why we need collective orders? what is the business requirement that calls for collective orders?
Regards,
Sravan Kumar

You may create several production orders from several planned orders, provided that the planned orders exist in the same plant and belong to the same MRP controller. This is called collective order conversion.
A collective order is a linking together of planned orders or production orders over several manufacturing levels.
Every production order has its own routing and order number.
When you are in the collective order structure, you can edit an individual order, a subtree, or the entire collective order.
Goods movements are not required for sub-assemblies. The material is passed on directly to the next
order up.
The special procurement key determines whether direct production is involved.
Since no goods movements are required for sub-assemblies, this means that you have less data to maintain. Goods movements are only required for the leading order and for components whose special procurement key does not stipulate that direct production should be used.
Changes to dates and quantities affect all related orders.
The actual costs of the production process are more realistic because they are not influenced by the
predefined price in the material master.
Master Data.
Special procurement key "52" on MRP 2 view
Individual Collective Flag MRP4 view
Bills of material and routings at each assembly level
Any structure possible

View Reports for individual Collections

Hello,
Is there a way to view Reports for individual Collections? When I review my Usage Reports or look at Reports within the PSM I only get a break down of total user actions per day for the whole site. I don't see a way to view data for just a single Collection. It would be extremely helpful to me and my faculty if we could see reports or stats for specific Collections. For example, if I could see total subscriptions and downloads for HIST1010. It'd be even better if we could view totals for whole months rather than each day of the month but at this point any data about a whole individual Collection would be great. Any help in viewing the data in this way is really appreciated.
Thanks!
Nikki
Multimedia Tech
Roane State Community College

Hi Syd,
Thanks so much for your prompt reply. I was able to use your directions to pull stats for the last few weeks for the faculty member who requested this info.
My dream (if Apple is reading) would be to view monthly stats and have that information attached to each course so faculty members could view and sort that information on their own. This would be especially helpful because as our site continues to grow and I continue to encourage faculty to manage their own content, the ability to access the data on their Collections would provide great feedback on how their ocntent is being used. Being able to see how frequently the content they're taken the time to make is being used could be empowering.
Anyway, thanks again for assisting with how to access the data that is currently available.
Best,
Nikki

I dont have data in "Client status summary" report for servers in server collection, but get data from our Windows 7?

Hi,
I dont have data in "Client status summary" report for servers in server collection, but get data from our Windows 7?
So and idea of way I dont get data from or servers? Missing client setting for servers?
/SaiTech

Hi,
I do see the server in Server collections in "Monitoring--Client Status--Client Activity" but not in reports like "Clients with failed client check details" i get "No Data Available"?
/SaiTech

How to collect STATISTICS for my jsp pages

Hola gurus.
I'd like to collect statistics for my website, for example on my main page and certain other pages. Ideally I'd like to code it myself rather than using an external tool.
Has anybody done this, or can u recommend an approach ?
Here's my thoughts so far:
1. Since I dont want to slow down the presentation of my pages, the first idea is to position the code after the </HTML> tag.
<HTML>
</HTML>
<% MyGreatApp.addStatisticForPageVisit(pageName); %>
So, even if the action of updating the statistics takes 1 second, my web page won't be delayed by 1 second (right ? or should I multi-thread it ?)
2. I can keep a memory cache of pages viewed versus session id's, so that my statistics can reflect distinct user sessions (instead of "page visits" which can be misleading if a user clicks 50 times on the one page).
Maybe there is a neat java caching class that I can use.
3. I can then "save" my cache of statistics to the db periodically (say, every 5 minutes) to reduce db load. (?) I'm using mysql for my app already.
Any help / guidance greatly appreciated !
Thanks for the help java community you r great.

Sure, we do it. Every time the user requests one of a certain set of pages, we write a record to a table in a database. That's all. No mucking about with threads or caches or anything like that. If you have a database setup where it takes 1 second to write a record, you need to get that fixed right away.
As for session ID versus user ID, it depends on what you need. We just log the user ID so we can see who is using what applications, but your requirements may differ. There's nothing preventing you from logging both. Also, I do not know whether session ID's are unique over a long period of time, but logging the date and time of access should help you to deal with that problem if it exists. Basically, don't put too much logic into your logging code, just throw records out at the database. Any filtering or selection should be done on the back-end system that analyzes the logs.
PC²

Table & Fields for Collection Amount

Hi,
I want to create an ABAP report for invoice Vs. Collection. But getting stuck in 1 scenario.
Case: I have raised 2 invoices for a same client.
   Inv No.        Date.          Amount
10000001    23.03.2009     100.00
10000011    15.04.2009     300.00
But I got a single collection cheque of Rs. 400/-
So I need to clear the 2 invoices against the collected cheque & pass a single entry in F-28.
After that my report show the values as
   Inv No.        Date.          Amount    Chq No.     Chq Date.       Chq Amt.     Outstanding.
10000001    23.03.2009     100.00      1021        25.04.2009        400.00         -300.00
10000011    15.04.2009     300.00      1021        25.04.2009        400.00         -300.00
Which shows all total a wrong information.
For collection amount I am choosing BSAD Table with WRBTR Field.
Please suggest how to resolve this issue, where can I find the field in which table, which can tell me the bifurcation of collection.
Thanks,
Bidhu

Collect all amounts from document type for collections, then collect all amounts from invoice document type. then you will be able to compare both amount.
The invoice amount should be sellected from both BSAD and BSID while the amount for collection should be selected in table BSAD.
Hope this help.

Report for collect statistics of scenarios in PI

Similar Messages

Maybe you are looking for