Report for converting SU01 users to EBP Users.
Hello experts,
I would like to know if there's a report that converts SU01 users to EBP users. I know there's a standard report by means of trans. USERS_GEN -> Create Users from SU01 users, but this is of no use since I can't <u><b>massively</b></u> map users to their respective Org, Unit.
Standard report only asks for ONE organizational unit...
Has anyone developed such report?
If so, please let me know and send me an e-mail to: [email protected]
Regards,
Gilberto Gallardo
Gilberto,
Hi. I have found the logic from report BBP_UM_EXAMPLE_EMPLO_CREATION quite useful.
Cheers
Rob
Similar Messages
-
SPAM effectiveness report for an internal user
Years ago on a previous product, we had a report we could run which would show the SPAM effectiveness for an individual user. This was useful for associates who felt they were receiving too much SPAM, when in reality, we were stopping 99.4% of the SPAM destined for them and the 2 they received over the past month were not devastating.
I looked through the reports available from the ESAs but do not see anything similar. We are running ESA 7.6.3-019 and SMA 7.9.0-107.
ThanksHello Mark,
in general spam efficiency reports would not work for individual, mainly because the spam detection process is not only limited to the spam engine, the major work is actually done by the reputation engine. In other words, senderbase, which on average blocks more that 90% of all connection attempts, mostly from hosts with a score of -5 or worse. By default these connections are already dropped before sender and recipients are injected, so the system is not aware who the potential spam was targeted for.
You could work around this by enabling delayed HAT rejection, which would still wait until sender and recipients are injected, before disconnecting. In this case, you can check
GUI: Monitor->Incoming Mail
specify a time range, and then enter the internal user in the search field below the main table. Or leave it empty and just hit "Search" for a list of all users, the list then can be sorted by clicking on the column names. The result table will contain entries like "Total Attemted" and "Spam Detected", and of course the results can be exported as well.
Hope that is what you are looking after.
Regards,
Andreas -
Unable to generate report for a specific user
Hi all,
I have a simple report in Agreements screen. The report is working fine when i Use another developer's id. But when i login using my Id and click the reports icon, it throws the following error.
" SBL-DAT-00382: The same values for '<?>' already exist.
If you would like to enter a new record, please ensure that the field values are unique. "
i have tried generating the report for the same agreement id. The report throws the error only when my login id is used and succesfully generating for other ids.
Pl help me understand.
Thanks
Sri978849 wrote:
Hi all,
I have a simple report in Agreements screen. The report is working fine when i Use another developer's id. But when i login using my Id and click the reports icon, it throws the following error.
" SBL-DAT-00382: The same values for '<?>' already exist.
If you would like to enter a new record, please ensure that the field values are unique. "
i have tried generating the report for the same agreement id. The report throws the error only when my login id is used and succesfully generating for other ids.
Pl help me understand.Understand that this has nothing to do with Oracle Application Express (APEX) which is the topic of this forum. Why have you posted this here? -
Report for converting the documents into the PDF format.
Hello Experts,
I need to know if any report/ T-code is available in SAP to convert the files into PDF format.
We are processsong these PDF's then into IXOS system.
Regards,
Anna.Hello ,
You may check with the below programs:
Program name Report title
RSTXCPDF Routines for Converting OTF Format to PDF Format
RSTXPDF2 Administration/Upload of type 1 and TrueType font files
RSTXPDF3 Customizing for OTF-PDF Conversion
RSTXPDF4 Help Report from CONVERT_OTFSPOOLJOB_2_PDF
RSTXPDF5 Help Report from CONVERT_ABAPSPOOLJOB_2_PDF
RSTXPDFT Test report for PDF conversion - converting standard texts to PDF
RSTXPDFT2
RSTXPDFT3 Test
RSTXPDFT4 Convert SAPscript (OTF) or ABAP Lists Spool Job by PDF
RSTXPDFT5 Test: GUI Download of Spool Request
Regards
Ramesh Ch -
Reporting Services - Content Manager shows all reports for all domain users even without permissions
I have installed
reporting services 2008 in: Site
Settings option / Security only 3 users
have added:
BUILTIN \ Administrators
System Manager
MYDOMAIN \ user1
System Manager, System User
MYDOMAIN \ user2
System Manager, System User
I have the same settings in the "start
up" folder and inside the folder
where are my reports, however if I authenticate
any user with different domain
to user1 and user2 can see all content
of the report manager can even
manage it.
Help me, greetings
Jennyhowever if I
authenticate any user with
different domain to user1 and user2 can see
all content of the report manager can
even manage it.
Hello,
Did you means that other domain user account (Other-Domain\user3) can access reports on the Report Manager without grant any permission? As per my understanding, it is not possible. SQL Server Reporting Services uses Windows Authentication
defaultly to determine who can perform operations and access items on a report server.
Based on your description, you grant the local Administrators group and two domain users with system-level role: System Administrator. System-level role assignments grant access to global tasks and permissions that apply to a report
server site, That's may cause the user can access and manage all contents on the Report Manager.
If you want to set permissions for accessing conntents on Report Manager, you can just specify itme-level role assignments.For example, if you grant user with Browser role on a report, the user can view report and report properties, but cannot edit
report properties.
Reference:
Lesson 1: Setting System-Level Permissions on a Report Server
Lesson 2: Setting Item-Level Permissions on a Report Server
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support -
SCCM 2012 usage report for remote users
Hi,
Can someone help to get the SCCM usage report for all remote users who accessed particular application remotely on windows 7 workstation
Regards,
MadhanIf the application is something and executable that the users have to start, you can use Software Metering.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude -
Simple report for lock users not actives in last 30 days ?
Hi, we need code in SE38 simple report for lock all users not actives in last 30 days.
This sample is good but need check : user its inactive in last 30 days.
http://www.sap-basis-abap.com/abap019.htm
Thank you.You do not need a report to do this. The instance parameter
login/password_max_idle_productive
will do this for you.
Cheers
Graham Robbo -
How to create report for user in terminal licens
Dear Sir,
how to take report for terminal server license, I have windows 2008 r2, I am trying to create a report for cal per user license
it is disable.
windows 2008 r2
workgroup
citrix 6.5
thanks
saud alam
saudalamHi,
Thank you for posting in Windows Server Forum.
Agree with words of TP, to create per user CAL report server must be domain joined. You cannot create report in workgroup mode. Please check beneath article for guide.
Track the Issuance of Remote Desktop Services Per User Client Access Licenses
http://technet.microsoft.com/en-us/library/cc754625.aspx
Hope it helps!
Thanks.
Dharmesh Solanki -
LMS 4.2 compliance reports for the User-Defined Policy Groups.
Dear team,
I need your help to know if i will be able to export compliance reports in PDF or CSV for the User-Defined Policy Groups.
I have checkedk the reports tab and i was able to export compliance reports in PDF format inly for the system defined policies but i couldn't i find any option to export these reports for the a user defined compliance policy.
Kindly let me know if this is possible.
Regards,
MuhannadDears,
Do anyone have an idea about this question?
Regards,
Muhannad -
Hi,
we would like to create a daily report for checking (by user-tracking function) mac-address list on the network.
I try to use “report designer” on “report” dashboard without any success. Could you help us to provide or create a method for applying a report job every day for checking our mac-address list
Thanks in advance.you can do the following
1. -create a quick report {Reports > Inventory > User Tracking > Quick Report}
2.export the last report which I suggested and filter the MAC address you are interested in
3. you can create a Custom report {Reports > Report Designer > User Tracking > Custom Reports } as per your need.
Thanks-
Afroz
*** Ratings Encourages Contributors **** -
Error message in creating EBP users from existing SU01 users
I am getting the following error messages when i try to create EBP users from existing SU01 users using users_gen: Error during creation of user: User not created or error(s) occurred during user creation. ``Central person`` already exists for user (BBPU_MESSAGES 042). Pls what does it mean and how do i solve this?
Babalola-
The message is indicating that the user you are attempting to create was previously created in the EBP system.
First I would try to correct the user via users_gen using the "check users" option. This may repair the user, but if the user has lost the association to the org then you will need to take some manual steps to re-establish the links for the user in the org details.
If this doesn't correct it, then use transaction PP01 to correct/verify the following relationships for the user. Start with the org unit and work your way down looking for the broken link/s.
Here are the required relationships for the objects:
ORG UNIT:
Relationship Object
B 003 Position(of user)
POSITION:
Relationship Object
A 003 Org Unit
A 008 Central Person (of user)
A 008 User
CENTRAL PERSON:
Relationship Object
B 008 Position
B 207 Business Partner
B 208 User
USER:
NONE
BUSINESS PARTNER:
NONE
Hope this helps you.
b -
Error while scheduling report for SAP users
Hi All,
We have SAP authentication enabled in our BO environment. (BO XI 3.1 sp2 FP 2.6 on windows 2003 server).
There are some webi reports based on BW Bex queries that we are trying to run on behalf of certain SAP end users. This we are doing using "schedule for" option.
Now what is happening here is if the end user has logged in once in BO system ,it runs fine. But in case user has not logged in to BO (using infoview etc.) ,it throws error saying "incomplete logon data" . Also if user changes or reset his password in BW and if he doesn't login to infoview after that ,system throws another error "Name or password incorrect (repeat logon)".
Based on these observation, we are suspecting if BO system uses stored SAP users credentials while scheduling report for them based on their last login.
Would like to mention here that we have checked option "automatically import users".
Please advice if this behavior is normal or we are missing some setting.
Thanks in advance,
ChandraHi All,
Any pointers or suggestions for this issue ??
Is there a setting/option avialable in CMC which could resolve these errors.
Or, user has to login once to infoview in all circumstances to avoid these errors.
Thanks,
Chandra -
In R12, can payroll user enter expense report for employees via web-based?
Hi,
In R12, can payroll user enter expense report for employees via web-based screen? Previously in 11i, it can be done via the Expense Report forms.
Appreciate advise on this.
Thanks in advance.
Regards,
Shiau ChinHi Anne,
Please see page 42 of the [url http://download.oracle.com/docs/cd/B34956_01/current/acrobat/120oieig.pdf]iExpenses Implementation and Admin Guide for R12 . If you are unable to enter the ID as per the guide, I would suggest raising an Service Request with Oracle Support.
Cheers, Pete -
Standard report for solve inconsistencies with user SAP.
Dear Experts.
We have a problem with a user(ZEST) that in the portal when I open a service(application) display a blue Window of Internet Explorer without display information.
We have copied this user((ZEST) TO (ZEST2 )with the same roles , however this user new work fine.
My question is:
There are a standard report for solve inconsistencies?
We have deleted the user and have created it of new, however this not work.Run the t-code SA38
Specify the name POWL_D01
In selection screen specify the user id in USER field of which your facing issue
Click on Execute
Run the T-code SA38
Specify the name POWL_WLOAD
In selection screen specify the user id in User input field of which your facing issue
Click on Execute
Now you check it issue will solve. -
How to create a jobsteps for a new user to run a report on portal
Hello Experts,
Is there any program that automatically creates a jobsteps for the new users for
a role??
My company BW roles are mapped with R/3. so whenever a new user is created in a R/3 role
it comes and maps with BW Role and creates that users automatically in BW.
Now the problem is if any new users are created in r/3 and mapped with BW. the report
fails to run for the new users unless and until they really login in to the system.
For ex: I have 5 new users which are created in R/3 and properly mapped with BW. But
report fails to runs for the new users.
ERROR: Jobs step fails for the User X
Is there any programe that automatically creates a jobsteps for the new users??
Please advice.
Thanks in advance,
HarishHello Kedar,
Do you manually add a new users to the role??
How the reports run for new users in your company??
Thanks,
Harish
Maybe you are looking for
-
How to Start a color in the middle of a cell in the table & end in next cel
Hai, I am developing a project in VB6 and the databse in MsAccess, i prepared the Report in HTML, Based on 2 Fields called Nextti & Duration Field I am coloring the Background of cells in the report table. Actually the Color should start and end insd
-
Plugins Failed to Load after AE Update
After updating to 11.0.2.12 I receive this error when starting After Effects. XDCAMH.prm ImporterFastMPEG.prm ImporterMPEG.prm All three failed to load.
-
Why does the FP 10 work with firefox but not with IE8
I down loaded the folowing for xp FP uninstall, FP plugin and FP debug from the link in one of your replys. now I can watch youtube with firefox but not with IE8. you asked me before if i was using 16 bit. whats that mean and how do I find out? plea
-
Help Please: Unable to download images in e-mail
Hi, I am a new Blackberry user and I recently purchased a new Blackberry 8900 on T-mobile (USA). I am having a number of issues with e-mail. I am using a Blackberry Enterprise Server to connect to my personal e-mail which is hosted by the third part
-
HT6114 How to reboot iMac from white screen
How do I reboot my iMac from a white screen I have done Command R and have tried to reinstall but I am getting a msg that the disc is lock