Report for date validity

Dear SAP Gurus,
We Have a requirement in SAP DMS, where in we maintain the reviewer and Approver in the Characteristics field, and also have a date characteristics defined,
the requirement is when the approver should be intimated well before in Hand to approve or release the document from his side.
based on this requirement it is expected that the system to display all the documents in due for approval by a Paricular approvor in advance before 15 days, 2nd report stating the list of documents still to be approved by the approver before 8 days,
and list of documents pending for approval before 2 days.
Can we delop a report based on the Field values of Additional atb characteristics, like list of document going to expire in 15, than 10, then 5 Days,
Please specify how to go about this
Priya S

Hi Gurus,
thanks for your response,
We are planning to do this funtionality may be with out use of Work Flow, as per the requirement there will be a Document admistrator who checks different documents pending for approval by different approvers, which is has to be approved in next 15 days,
and he sends a mail of those list to the concerned approver for action.
the same is done with docments which are due for approval in next 6 days,
here in CV04N we can get report based on the Approver name (if ,maintained in Additional data field)
but the problem is how can we get the report which document is has to be approved in next 15 days, or which docments are due for approval in next 6 days, ( even if i maintain date characteristic field in classification)
if some development has to be done how can we go about this Please guide.
Thanks and regards
Priya S
Edited by: Priya S on May 7, 2009 10:49 AM

Similar Messages

MB5B Report for Date Wise Stock and Value

Hi,
I am Taking MB5B Report for Date Wise Stock and Value.
But I have one doubt all stocks is coming or not in these report like Unrestrected Stock,Return Stock.Blocked stock,Transist stock,Restrected Stock,qty Inspection Stock.
I have another Doubt in these report three Stock type indicaters are there like these.
1.Storage Location / Batch Stock
2.valuated Stock
3.Special Stock.
But i have one doubt what is defferent these
1.Storage Location / Batch Stock
2.valuated Stock

Hi Prasad,
Yes MB5B report consider the Unrestricted, Quality, Blocked, Transit stock and restricted stock. Not sure about Return Stock.
If you select the Storage location/Batch stock radio button then the system will display all the possible stock from the storage location and the corresponding batch also.
If you select Valuated stock radio button then system will show only the valuated stock not the Non-valuated stock. Because Non-valuated material type is available in SAP system will not show those stock suppose if you select the Valuated stock radio button.
Regards
Karthick

LIST OF STOCK VALUES BALACE REPORTS FOR DATE WISE

Dear friends,
In MB5L T.Code we can get period wise balance reports,but client's requirement is date wise Balance report,could you help me any kind of standard reports for date wise.
Regards,
Sabhapathy R

Dear Vishal,
Thanks for your reply,mb5b only stock and documents number we can get client want to mb5l with date specific balance reports with GL account's.
Regards,
Sabhapathy R

Report for date variances between delivery and goods receipt date

dear guru ,
i search a standard report for date variances between delivery date in the purchase order and the goods receipt date.
Do you help me ?
Thanks

Hi,
Use Report ME80FN and here check the delivery schedule option in output screen.

Inputs for Data validation

Hi,
can anyone share the inputs for data validation.
Source data to SAP retail data
any validation tools?
any enay method to extract data from SAP, apart from tables
Regards,
Arun

Hi vamsi nagaraju
it depends on wich version of ECC you are using, if you are using ECC 6.0 or ECC 5.0 all records are in table FAGLFLEXT but if you are using R/3 4.7, 4.6 etc, all records are in ECMCT for consolidation purposes.
Try to run T-code F.01 for balance sheet in both versions.
which validations do you want?
regards!!

How to make Report for Data Forms ?

Dears
I need to make a report for specifice Data Form to show me who have access on this data form and the kind of security which took on dimensions members on the same data form. Just be note that the Security is assign on the Folders of data forms and is assgin by groups not users.

There is no pre-built report that will do what you're describing. Last year at KScope, Brian Marshall gave a presentation on pre-built queries to run against the Planning repository. I don't see it on the ODTUG site, but here's some SQL that might get you started. It's not exactly what you're looking for, but it's a start:
SELECT
     o.[OBJECT_NAME] AS [Secured_Object]
     ,uo.[OBJECT_NAME] AS [User_Name]
     ,CASE a.ACCESS_MODE
          WHEN 3 THEN 'Read'
          WHEN 1 THEN 'Write'
          WHEN -1 THEN 'Deny'
     END AS Access_Level
     ,CASE o.OBJECT_TYPE
          WHEN 24 THEN 'Task List'
          ELSE ot.[TYPE_NAME]
     END AS Object_Type
     ,CASE a.FLAGS
          WHEN 0 THEN 'Member'
          WHEN 5 THEN 'Children'
          WHEN 6 THEN 'Children (Inclusive)'
          WHEN 8 THEN 'Descendants'
          WHEN 9 THEN 'Descendants (Inclusive)'
     END AS Access_Level
FROM
     HSP_ACCESS_CONTROL a
INNER JOIN
     HSP_OBJECT uo ON a.[USER_ID] = uo.[OBJECT_ID]
INNER JOIN
     HSP_OBJECT o ON a.[OBJECT_ID] = o.[OBJECT_ID]
LEFT JOIN
     HSP_OBJECT_TYPE ot ON o.OBJECT_TYPE = ot.OBJECT_TYPE
ORDER BY
     o.OBJECT_TYPE
     ,o.[OBJECT_NAME]

RM06ENP0 - SAP SURGERY REPORT for geting valid condition price in CONTRACT

Hello All
Has any one run this report RM06ENP0 everyday in the SAP ECC system ?.
any one experienced difficulty ?challenges?
is this report is mandatory to obtain correct and valid price from the condition?...
Muthu

Hi
Please clarify my doubts, which are given at ***
It will be better if you create Pricing Report for the necessary condition table of your access sequence
M_LA - Create Condition List
M_LB - Change Condition List
M_LC - Display Condition List
M_LD - Execute Condition List
In M_LA, in initial screen, enter Pricing Report Code(*** I am not getting the pricing report code in the drop down, if i want to create them how can I create)
and description and press enter,
here select "MATNR" (Material) and then Press enter,
here select the condition table for which you have maintained the condition record and Press enter,
here set the positions of the fields and save the report and then execute in M_LD and from here you can download details to Excel file.
Your help is appreciable
Thanks and Regards
KVK

#ERROR message in report for date format conversion

Dear Collegues,
Why is it that I get #ERROR message (instead of date value) in my report when I use the formula
=ToDate(UserResponse("Enter End Date:");"dd.MM.yyyy") ??
When I only write UserResponse("Enter End Date:") I get the appropriate date, f.ex 5/12/2009. This is american standard for 5th of may, I need to see it like 12/05/2009.
If I try to just enter the date object behind the prompt ([Settlement Date]) i get message #MULTIVALUE even though I have promptet for 1 special date...
Is there another formula I can use to get the right format? I can't adjust the format using properties, it doesn't make any difference, the settings I put in there.
Regards Silje

Thank you for the very quick answer! Using FormatDate() I get an error message while validating the formula:
The expression or sub-expression at position 12 in the FormatDate function uses an invalid data type. (WIS 10037)
I tried making a variable inside BO called [End Date] = userResponse("Enter End Date:") but I get the same error message then. Creating a variable you can only choose between Dimension, Measure and Detail, not Date. Is that some of the reason?
Finally I tried FormatDate([Settlement Date]; "dd.MM.yyyy"). Validating the formula I get the message that the formula is correct, but in the report the field containes message #MULTIVALUE...
SILJE

How to select a single row in a report for data entry?

Hello All, and Greetings.
I am a newcomer, with no experience in Apex, and in need of help.
I have to generate a report with some read-only columns and two write columns. These will be the result of a SQL query.
For the sake of robustness in data entry, a row has to be selected prior to data update. The document specifies that a radiobutton for each row be present, and the corresponding row selected accordingly by clicking its radiobutton. There could be any number of rows returned in the report, which means that the number of radiobuttons will vary dynamically according to the number of returned rows.
1. So my question is, how do I construct the page to do this? Please remember I am a newbie, so detail will be appreciated.
2. Another question is, how do I change the fonts and colours of the names displayed along with the listboxes?
Thank you very much for your attention. Any help will be warmly received.
With regards,
Arindam.

You may find this article useful: http://balusc.blogspot.com/2006/06/using-datatables.html
P.S: please don't reply with "but I cannot read and write code, I can only drag'n'drop!".

Function for Date Validation

Hi,
Can anyone tell me a Function Module to Valdate Date?
Thanks & Regards
Sheela

Thanks for the Quick response.
But i want a FM which will validate Every Date entered(Date format)
Thanks Once again
Regards
Sheela

Cost Breakdown Report for Date Range

Hi Guys,
i have 6 payrolls running and all of them while running for this report is working fine but for specified payroll it's not working the strange thing that it's working On TEST and not working in Production, can any one of you tell me about the prerquezt for solving or tracking this issue.
BestRegards,

but for specified payroll it's not working
==========================
What is not working can you little specific.
Thanks

How to add column to report for entry

what does it take to add another column to a (classic) report?
I added a column to the table and view and now I need it to be in the report for data entry.
That's the problem. I got as far as getting the column in the report which was as easy as
adding it to the query, but it is not shown as
a field that could be entered. So I'm missing something. What distinguishes a field that
is enterable from a field that is not enterable? I don't see where that information is held.
similarly if I try to add a validation for it the new field does not appear in the list as it is not
viewed as a crud field. What gives it the crud magic?
I'd really appreciate it if someone can tell me.

Never mind I figured it out on my own.
(No I cant believe it either.)
Having added the column to the select statement,
What makes a newly added tabular form column be viewed as updatable is
what is in the Display As entry. (I think). Such as Text Field
or Datepicker. Those are updatable. But display as text is not updatable.
But I suspect it is also necessary under report attributes for the column
to have these filled in also.
reference table owner SOME_SCHEMA
reference table name SOME_TABLE
reference column Name COLUMN_NAME

Form Data Validations

Imagine there is a field called "Username" ,"Password" and "Submit button".
I want to implement following validations on click of "Submit" button.
1 . Please enter Username.
2. Username should have a length of 10 characters.
3. Please enter Password.
I want the validation procedure in 2 ways.
1. The process of validation by indvidual criteria
Example:
displaying each validation message by validating all bussiness criteria one by one.
That is in the above "Username" will be validated first.
If user enters value it will check for number of characters less then 10.
If this is passed then need to check for password entry.
2. Validating complete form at once
Validating complete form for all bussiness conditions and displaying them at once.
Please provide any links for data validations.

Hey Raghu,
you can implement a method like checkFields() in the "@@begin others" part of your view which returns a boolean value. When you press the "SUBMIT"-button it is checked whether every mandatory field is filled with the correct data. There you can implement the logic of your query.
Here is an example for the method <b>checkFields()</b>:
/** Checks whether the mandatory input fields are filled with regular data. */
private boolean checkFields()
     if ( wdContext.currentFreightrequestElement().getTitleInputField() == null ||
               wdContext.currentFreightrequestElement().getTitleInputField().trim().length() == 0 )
          wdComponentAPI.getMessageManager().
               reportContextAttributeMessage(wdContext.currentFreightrequestElement(),
               wdContext.nodeFreightrequest().getNodeInfo().getAttribute(ATTRIBUTE_TITLE_INPUT_FIELD),
               IMessageFreightRequestComponent.ERROR__01,
               null,
               false);
          return false;
The important thing is the <b>reportContextAttributeMessage()</b> which highlightens a field you want to check.
In the action-part you can use parts of the following code:
boolean success = false;
     if ( checkFields()) {
          success = wdThis.wdGetRequestComponentController().executeSave();
     if (success == true)
          IWDControllerInfo controllerInfo = wdControllerAPI.getViewInfo().getViewController();
          String dialogText = wdComponentAPI.getTextAccessor().getText("TEXT_03");
          IWDConfirmationDialog dialog =
               wdComponentAPI.getWindowManager().createConfirmationWindow(dialogText, controllerInfo.findInEventHandlers("createNewRequest"),wdComponentAPI.getTextAccessor().getText("TEXT_04"));
          dialog.addChoice(controllerInfo.findInEventHandlers("returnToWelcomeView"), wdComponentAPI.getTextAccessor().getText("TEXT_05"));
          dialog.setTitle(wdComponentAPI.getTextAccessor().getText("TEXT_02"));
          dialog.show();
So far,
Domingo

Data Validation in Excel 2007

I have three drop down lists that I have already made dependent on the first list selection using the INDIRECT formula. Is there a way to make the selection in the two following dropdowns Depth & Thickness select cells within the data
list rather than the complete list?
Material
Depth
Thickness
UPVC
250mm                        25mm
Aluminium
225mm
22mm
Timber
200mm
19mm
Steel
175mm
16mm
Other
150mm
Other
The example maybe that the user selects
Aluminium then the Depth dropdown list will only show
225mm,
175mm and
Other rather than the complete list, this will also restrict the Thickness dropdown would
restrict its list as well.
Once these selection is made they will be used in a separate cell to calculate a cost. So if
Aluminium,
225mm,
Other is selected then there is a rates table that will return
the cost of that selection. Any suggestion on how to do this would also be helpful.

The source range for data validation of type List must be contiguous, so you cannot show individual, non-contiguous entries from the list. So it's better to create a list of available depths for each material, and name the ranges for example Depth_UPVC,
Depth_Aluminium, etc.
For example (using fictitious values):
Let's say the dropdown for Material is in cell D2; you can then use =INDIRECT("Depth_"&D2) as source for the Depth dropdown.
Similar for Thickness.
Let's say you have a rates table on a sheet named Rates with material in A2:A100, depth in B2:B100, thickness in C2:C100 and the corresponding rate in D2:D100.
Material, depth and thickness are on the current sheet in D2, E2, F2. The corresponding rate is given by the following array formula, confirmed with
Ctrl+Shift+Enter:
=INDEX(Rates!$D$2:$D$100,MATCH(D2&E2&F2,Rates!$A$2:$A$100&Rates!$B$2:$B$100&Rates!$C$2:$C$100,0))
Regards, Hans Vogelaar (http://www.eileenslounge.com)

Validation For Date,String and Date in a reports Region

Apex 4
Good day to all apex users How do I validate a apex_item.text if the value is string the user can only input a string value if it is number then the user can input numbers only and if it is a date the user can only input a date values?

APEX_ITEMS are not part of the default apex gui... In fact they are just functions which returns html.
You can however do some stuff with the attributes parameters. You can find some cool stuff over here: Re: Validation For Date,String and Date in a reports Region
If you want apex validation you need to create a page validation and loop over your apex_items with apex_application.g_f0x
Br,
Nico

Report for date validity

Similar Messages

Maybe you are looking for