Report for employees net and gross pay for a pay period

Hi Gurus
How should I approach to write a report which gives employees net pay, gross pay and cost center  for a pay period?
Do i have to use cluster tables?
As I am new to this module any help will be appreciated.
Thanks in Advance

Unless you store your payroll results in Infotypes then yes you would have to retrieve this information from the PCL2 Cluster. The Cost Center information would come from the WPBP table and the Gross and Net Pay from the RT table.

Similar Messages

  • Plant and Profit center wise Turnover and  gross profit for the Month for s

    Hi
    We need a report Plant and Profit center wise Turnover and
    gross profit for the Month for selected month and GL's
    We are using new GL. but our bi system old version.
    SAP_BW -- 7                      Patch:SAPKW70015
    BI_CONT - 703                    Patch:SAPKIBIIP7
    Do you have any idea or experiences which data source and data target required to full fill this requirement?
    Thanks
    Ramana P

    Hi
    You need to check if you really the report Plant wise and if yes, then check if the Accounting Transactions are maintained at Plant Level in your source system i.e. in R3.
    Ideally it should be Business area or Functional Area or Controlling area which are maintained in Accounting Transactions. You will also the relevant details for these Characterisitics + Profit Center in the NEW GL Accounting data sources.
    Cheers
    Umesh

  • Need a report on delivery status and response status for capaign recipients

    hi, i need to make a report on delivery status and response status for capaign recipients but cannot find them in the campaign subject area nor the campaign response subject area, any idea?
    thanks

    Correct the Campaign Response History is the report you are looking for. The fields that may be helpful to you are.
    Response status - This shows message opened, click-thru's, opt outs etc
    Delivery status - Hard bounce, soft bounce etc
    To get more details from the above results add the following.
    Response type - This will show the URL that was clicked on a click-thru in case you have multiple links tracked in one email. It will also show the reason for hard bounces. This is important because not all hard bounces will trigger the "Never Email" flag to be checked. This occurs for emails with the bounce statuses of Bad Address,
    Address Moved or Unknown Address only.

  • Newby question: I have a report that is featured and is available for Q&A and now I want to display this functionality in a web part of a site...

    Hi,
    I have a report that is featured and is available for Q&A and now I want to display this functionality in a web part of a site.
    I am using a trial right now, so I am not sure if I have all the necessary licences, but I am really new to this subject so a link to msdn page or blog item might already do the trick.
    This is what I have right now: 
    https://www.youtube.com/watch?v=rV2_m4iWxSE
    Thanks

    No that is not currently available. 
    Thanks!
    Ed Price, Azure & Power BI Customer Program Manager (Blog,
    Small Basic,
    Wiki Ninjas,
    Wiki)
    Answer an interesting question?
    Create a wiki article about it!

  • Incorrect Net and Gross Weights in Sales Order

    Hi All,
    I have a problem with weights in sales orders. The Sales Order Qty is 8,725 KG but the Net and Gross Weight is calculated as 7,634.375 KG. Below are the details of my data/config.
    Material Master Data
    Base UOM in: KG
    Net Weight: 0
    Gross Weight: 0
    Gross Weight UOM: KG
    VOV7 Configuration
    Item Category TAC: Weight/Vol is checked
    Item is a configurable material. For non configurable materials we have the Net and Gross Weight entered in the Material Master but for configurable material the Net and Gross Weights are zero. Are these values calculated by VC? If yes, What do you think would be the problem in this case? Any help would be appreciated.
    SAP Version: ECC 6.0
    Thanks,
    sckr

    Goto to material master and check the field Order Unit .
    Check waht you have maintained there?
    Thanks& Regards
    Rasik Waghela

  • HT204053 i have two apple id one for Store purchases and the other for iCloud, and i want to merge them into one, can i transfer all app from one to other ?

    i have two apple id one for Store purchases and the other for iCloud, and i want to merge them into one, can i transfer all app from one to other ?

    It is not possible to merge Apple IDs.

  • Can I use a domain for one site and mobile me for a different site?

    Can I use a domain for one site and mobile me for a different site?
    I have two sites, I would like to have up and I would like to do one through a domain and one through mobileme is this possible?

    Yes you can. You can use the CNAME method of forwarding for the first site (the top site in iWeb) and use the MMe URL for your account for the other site: http://web.me.com/YourAccount_Name/SiteName/
    OT

  • I want to set up 5 different ipods to sync from one library, but want to be able to control what is synced to each ipod and have it remember that for future synching and just look for new songs and not sync all the other music in the library

    I want to set up 5 different ipods to sync from one library, but want to be able to control what is synced to each ipod and have it remember that for future synching and just look for new songs and not sync all the other music in the library

    Click here for options.
    (58961)

  • Can I set up multiple usb hard drives- one for time machine and a second for media? Can one also print wirelessly with an old HP C6280 printer?

    Can I set up multiple usb hard drives- one for time machine and a second for media?
    Can one also print wirelessly with an old HP C6280 printer?

    Can I set up multiple usb hard drives- one for time machine and a second for media?
    Yes.
    Can one also print wirelessly with an old HP C6280 printer?
    Possibly by using an Airport Express, but depends on what type of port connection the printer requires.

  • Auto To working for one material and not working for other material

    Hi,
    Hope everybody is doing fine.
    I have configured the auto TO. Its working fine for one material and not working for the other material. I checked the material master and wm 1,2 views have the same fileds / values. What could be wrong?
    I didn't setup the back ground processing job. Is that is affecting it?
    thanks for any help.
    regrads,
    KHAN

    Thnaks,
    You are right but then what could be wrong? Its working for one material and not working for otehr material? Any clue?
    Appreciate your time charlie

  • F4 for employee select options in WD for abap application

    Hi,
    I have defined a select option for employee selection in my WD for abap application. The only problem is that I cannot get a f4 help button to be displayed. I have defined the select option using the following code :
    wd_this->m_wd_select_options = wd_this->wd_cpifc_select_options( ).
    init the select screen
    wd_this->m_handler = wd_this->m_wd_select_options->init_selection_screen( ).
    create a range table that consists of this new data element
    lt_range_table = wd_this->m_handler->create_range_table(
    i_typename = 'PERNR_D' ).
    add a new field to the selection
    wd_this->m_handler->add_selection_field(
    i_id = 'PERNR_D'
    it_result = lt_range_table
    i_read_only = read_only ).
    I have tried adding entries for the parameter help_id but still cannot get a f4 button.
    Thank you in advance for any assistance provided.

    Hi,
    Try this.
    DATA lo_interfacecontroller TYPE REF TO iwci_wdr_select_options .
    lo_interfacecontroller = wd_this->wd_cpifc_select_options( ).
    DATA lo_r_helper_class TYPE REF TO if_wd_select_options.
    lo_r_helper_class = lo_interfacecontroller->init_selection_screen( ).
    Creating range table
    DATA lt_range TYPE REF TO data.
    CALL METHOD lo_r_helper_class->create_range_table
    EXPORTING
    i_typename = ''PERNR_D'
    RECEIVING
    rt_range_table = lt_range.
    Disabling the global options
    CALL METHOD lo_r_helper_class->set_global_options
    EXPORTING
    i_display_btn_cancel = abap_false
    i_display_btn_check = abap_false
    i_display_btn_reset = abap_false
    i_display_btn_execute = abap_false.
    Adding the selection field
    CALL METHOD lo_r_helper_class->add_selection_field
    EXPORTING
    i_id = 'PERNR_D'
    I_OBLIGATORY = ABAP_TRUE
    i_value_help_type = if_wd_value_help_handler=>CO_PREFIX_SEARCHHELP
    I_VALUE_HELP_ID = 'PREM'
    it_result = lt_range.
    Check this artcle for more details which uses VBELN as select option with search help.
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/103e43d5-fdb8-2d10-90ab-b5e8532cbc04

  • HT200197 NO audio using Apple TV for streaming materials, and YES audio for Mac stored ones; what gives?

    NO audio using Apple TV for streaming materials, and YES audio for Mac stored ones; what gives?

    Hello Cravate,
    The following article provdies some useful troubleshooting that can help resolve audio issues with your Apple TV.
    Apple TV (2nd and 3rd generation): Troubleshooting audio issues
    http://support.apple.com/kb/TS5150
    Cheers,
    Allen

  • After updating to iOS 6 my iPod Touch 4th.Gen is virtually unusable ... does anyone know how to sue Apple since they gave no warning about iOS 6 being for iPad optimisation and a killer  for iPods ?

    After updating to iOS 6 my iPod Touch 4th.Gen is virtually unusable ... does anyone know how to sue Apple since they gave no warning about iOS 6 being for iPad optimisation and a killer for iPods ?  Before I throw away my iPod Touch does anyone know if Apple intends to rectify their obnoxious disregard for iPod users by issuing another 'upgrade' which will allow iPods to work without the constant system crashes that iOS 6 has caused ?

    Contact a lawyer if you want to sue.
    Otherwise try:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Possible to make an item editable for certain users and read only for other

    Is it possible to make an item editable for certain users and read only for others?
    I've been able to accomplish this by taken the select statement that I used to define an authorization scheme, placing it in the Read Only condition of the item. However, I would like to simply reference the authorization scheme to utilize caching, and to help keep things cleaner for future maintenance.
    Is it possible to reference an authorization scheme in an item condition similar to the way another item can be referenced by preceding it with a colon (i.e. :P1_First_Name)?

    Thank you, your suggestion worked.
    It would be nice on a future release of APEX if a drop-down box existed under the Ready Only section that would allow an existing Authorization Scheme to be selected or negated when applying the Read Only attribute to a form item.

  • Smartform for printing picklist and control ticket for productiono order

    Hello all,
    Is there any standard smartform for PICK LIST AND CONTROL TICKET for PRODUCTION ORDER....?
    Thanks,
    Chaitanya
    Edited by: oskchaitanya on Aug 23, 2010 3:06 PM

    There is no specific Program for the Control cycle  print.
    You can use the FM PK_KANBANCARD_PRINT.  This is configured using the Transaction PKMC. ( This is like NACE for PP )
    You can copy this and create a cutom one and assign it in PKMC. Take the Help of Functional Consultant for help on this transaction
    Thanks!
    Ashok

Maybe you are looking for