Report for equipment with characteristics and value

Dear friends,
I need to develop a report which contains fields from the equipment master like superior equipment, functional location, asset etc. as well as charcteristics and values maintained in the equipment. (Multi level equipment display) is not acceptable to client. I understand that table AUSP can be utilised for getting the characteristic value, but I am unable to find any fields from equipment master which I can use to pass on to the AUSP table. Kindly let me know if there is any other table which I can use or any other approach I can take.
Thanks and best regds
Arun

Thanks Pete for the quick response. I will check with the Abaper if he could utilise the function modules for developing the report.
best regds
Arun

Similar Messages

  • MB5B Report for Date Wise Stock and Value

    Hi,
    I am Taking MB5B Report for Date Wise Stock and Value.
    But I have one doubt all stocks is coming or not in these report like Unrestrected Stock,Return Stock.Blocked stock,Transist stock,Restrected Stock,qty Inspection Stock.
    I have another Doubt in these report three Stock type indicaters are there like these.
    1.Storage Location / Batch Stock
    2.valuated Stock
    3.Special Stock.
    But i have one doubt what is defferent these
    1.Storage Location / Batch Stock
    2.valuated Stock

    Hi Prasad,
    Yes MB5B report consider the Unrestricted, Quality, Blocked, Transit stock and restricted stock. Not sure about Return Stock.
    If you select the Storage location/Batch stock radio button then the system will display all the possible stock from the storage location and the corresponding batch also.
    If you select Valuated stock radio button then system will show only the valuated stock not the Non-valuated stock. Because Non-valuated material type is available in SAP system will not show those stock suppose if you select the Valuated stock radio button.
    Regards
    Karthick

  • Report for equipment with Asset number

    Hi
    I want report where i can get equipment number with asset number. I hecked information system. But id din't got

    Use Transaction IE05 - it is a Standard PM Module report that has Equipment number and Asset Number.

  • Report for material with sloc,qty available, and production order

    hi friends, i need advice on getting this report for material with qty and specific sloc with the corresponding Prodn order numbers. in mb51 i could get all these details except the prodn order no. could you advice me please?

    to make sure you know how to do this.
    In the material document list, hit "Ctrl+F8" on your keyboard.
    A window will pop up. Click on the button position and look for "order" in the list of available fields. That should do it.
    Rgds.

  • Report for Asset with only values (No Zero values)

    Hi All
    There is requirement where in the user wants to genenerate report for assets with  values .There should not be Zero balance assets  included in the output. In short only with values in the asset master the report needs to be generated. Can one have any idea on this .
    regards
    Navin
    Edited by: Naveen Rao on Jan 22, 2009 10:04 AM

    Hi
    Can you  please specify the report name.
    regards
    Navin

  • List of rejected sales order with quantity and value

    Hi,
    Is it possible to get the report from VA05 for the list of rejected items with value and quantity ?
    Pls help
    Thanks,
    Vijesh

    Dear Vijesh,
    VA05 I believe is a very powerful report for doing analysis at order and line item level. If your rejection criterion includes a rejection reason at line item level, yes this list from VA05 can give rejected Sales Orders with Quantity and Value.  See the screen shot below.
    I selected a list with open dates till date, I can see Sales Order number, Sales Document Type, Item Number, Material, Rejection reason, Quantity at line item level and net price.
    However, I am not sure what is the rejection criterion you use in your business and I am not sure if you use rejection reason and hence I would like to hear from you, if this explanation helps you.
    Thanks
    Nagaraj

  • BEx analyzer 7.0 Report for last 3 months and current month

    I need to create a report for a key figure (net value) and character (material), 0calday
    Output format:
    column1 : net value - previous year
    column2 : net value - current year
    column3 : net value - current quarter (separate columns for 3 months)
    column4 : net value - previous quarter (separate columns for 3 months)
    column5 : net value - current month
    column6 : net value - 1st of month to current date (separate columns for each day).
    Please help.
    Points will be assigned.
    Thanks
    Mary.

    Hi 
      U R infoprovider should have following time characterstics 
      0FISCAL YEAR, 0FISCAL MONTH/QTR 
    column1 : net value - previous year
      On the basis of user input data derive the year and offset it by - 1 (VYEAR-1)and make a RKF for that  .
    column2 : net value - current year
      On the basis of user input data derive the year(VYEAR) and 
       make a RKF for that  .
    column3 : net value - current quarter (separate columns for 3 months)
      If QTR is there then derive the QTR on the basis of         0calday/else if month is there then determine month range       like 1-3 = Q1  4-6  = Q2 and it will be done in user exit  
    column4 : net value - previous quarter (separate columns for 3 months)
      On the same way as above u can determine the same 
    column5 : net value - current month
      On the basis of 0calday determine CALMONTH and create a      RKF for this 
    column6 : net value - 1st of month to current date (separate columns for each day).
      Create a Exit variable type range on CALMONTH for this and 
       keep the range as 01-current month(which will be derivefrom     0calday) 
    Thanks,
    Debasish

  • Anyone get a huge "Problem Report for iDVD" with hundreds of lines of information?

    Anyone get a huge "Problem Report for iDVD" with hundreds of lines of information? This happens right before the DVD would be finished burning but instead crashes and leaves the long report your have to scroll down several times to read. I had to take several screen captures of the screen to get the WHOLE report. Here is two:
    (If there is another thread on this - just answer the question or refer me to it. I'm past due on a big project. Don't have time to read all 21,000 discussions in the iDVD thread. Be kind. Thanks )

    Some things to try first:
    1. Disconnect any and all 3rd party devices that didn't ship with your mac directly from apple (both FW and USB included). 
    2. Restart your mac without any 3rd party devices attached whatsoever. That includes ext. hard drives, blue tooth devices, and any third party memory product/s. Basically, anything that doesn't come directly from apple has to go (at least while troubleshooting).
    3. Need you to dispose of the plist for iDvd also. Go to you Home folder, the one that looks like a house > Library > Preferences > com.apple.iDvd.plist and drag and drop this file/s to the trash. Make sure to first quit iDvd prior to disposing of this pref. file/s.
    4. Run apple's disc utility and repair permissions. Applicantions > Utilities > Disc Utility > Repair Permissions.
    5. Restart your mac yet again, and try iDvd one more time.
    6. If it's still at issue then please open iDvd from a separate user account and try your project one more time. If you don't know how to create a separate user account then just come on back and one of will show you how.
    Good luck.
    Message was edited by: SDMacuser

  • TS1717 Having trouble running iTunes version 11.0.2 on a Dell Laptop running Windows 7 Professional Service Pack 1.  Keep getting an error message "the software required for communicating with iPods and mobile phones was not installed correctly..." reinst

    Having trouble when I launch iTunes (version 11.0.2) on my Dell Laptop running Windows 7 Professional (service pack 1).  I get an error message indicating software required to communicate with iPod and mobile phones was not installed correctly.  Do you want iTunes to try to repair this for you?  I normally respond with OK and it immediately tells me "could not be repaired.  Please reinstall iTunes..."  I have done this a number of times to no avail.

    I also notice Quicktime is not getting installed at all.
    That one is normal nowadays (ever since the iTunes versions 10.5.x).
    The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you?
    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • Error message: "the software required for communicating with Ipods and mobile phones was not installed correctly....

    2 error messages when opening itunes: "The software required for communicating with Ipods and mobile phones was not installed correctly.  Do you want Itunes to repair this for you?"  When clicking yes another message indicates not able to remove services.  Another message is: "Service (ipod service) could not be installed.  Verify that you have sufficient privileges to install system sources."  I've uninstalled all Apple services (itunes, quicktime, apple software update, apple mobiles devices support, bonjour and apple application support and reinstalled itunes/quicktime - no change in error messages.  I cannot burn CDs using Itunes.  This all seemed to happen when I updated itunes to version 10.  I have a Windows 7 64-bit operating system on a Dell Inspiron Zino HD; the Itunes software is also 64 bit.

    See the second box of  Troubleshooting issues with iTunes for Windows updates.
    tt2

  • HT201365 hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me

    hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me i try all other method restore ' upgrade etc but none work plz say what i do if u find some solution tham msg me on [email protected]

    First, we're not Apple here (Apple does not participate in this forum).  We're only users like you.
    The previous owner has not given you the correct ID and password for you to use.
    If the iphone has iOS version 7, then read through the following...
    http://support.apple.com/kb/HT5818

  • Hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me i try all other method restore ' upgrade

    hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me i try all other method restore ' upgrade etc but none work plz say what i do if u find some solution tham msg me on
    iPhone 4S

    oenkz33 wrote:
    this does not help at all for the second owner, after making the first owner id with careless, sorry for my english ...
    Careless? Possible, but unlikely. Most likely the phone was stolen from the first owner. It would be a VERY careless iPhone owner who did not erase their personal information from a phone before selling it, and to do that it is necessary to disable Activation Lock. In most places in the world knowingly using stolen property is a crime, so the fact that the phone doesn't work may be the least of one's risks.

  • When I click on itunes, it tells me that thesoftware required for communicating with ipods and mobil phones was not installed properly. I have not changed anything on my computer so I'm not sure what I should do? Help

    Help, When I click on itunes on my computer it tells me that the software required for communicating with ipods and mobil phone was not installed properly. I havent' changed anything. Does anyone know what I should do? Thanks

    See the second box of Troubleshooting issues with iTunes for Windows updates.
    tt2

  • I'm sorry, I have to convert the mov file. for use with fce and / or imovie11, better ProRes422 or intermediate codec?

    I'm sorry, I have to convert the mov file. for use with fce and / or imovie11, better ProRes422 or intermediate codec?

    FCE only used AIC for HD.
    Al

  • The software required for communicating with ipod and mobile phones was not installed correctly

    ok i've seen this in several threads and haven't found one with an anwser. the software required for communicating with ipod and mobile phones was not installed correctly. of course when you tell it to repair it does not. this has happened several times now and only cure i have found is uninstalling itunes and reinstalling. works for maybe a few weeks then does the same thing and i start all over again with uninstall and reinstall. i tunes version 10.4.1.10  64 bit running on windows 7 64 bit and trying to sync with Iphone 3gs - so anyone have a fix for this or am i stuck reinstalling itunes every few weeks???

    "The feature you are trying to use is on a network resource that is unavailable.  Click OK to try again, or enter an alternative path to a folder containing the installation package "iTunes64msi"
    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Maybe you are looking for

  • How to include variable inside XML Fragment in assign ?

    HI..how are you today. i need to assign an XML Fragment...like this into a variable: <tns:pCmds>put @Encoded_Filename@</tns:pCmds> <tns:pCmds>bye</tns:pCmds> that Encoded_Filename is a variable..but of course..it is taking the whole put ...as a strin

  • Battery drain with IOS 6 update

    Hi, I've seen already quite a few posts on this and I just want to confirm that i'm also experienceing a dramatic reduction in battery life. I updated this morning my iPhone 4, and the battery didnt make to 3 pm. (Normally lasted until night time, wi

  • My Firefox / Google start page has lost the buttons that allow me to "search the web" or "look at pages from UK". How can I get these back?

    These are the selection button just under the window where you enter what you are searching for and above the "Google Search" button. They used to be there but have disappeared!

  • No email again

    Whats going on with icloud, no emails again!! I'm in London and over the past few weeks have been getting intermittent service and today 4th Oct nothing again. No email on any devices and again when logging into i cloud via web browser nothing, I hav

  • MacBook can't do much of anything without freezing

    My computer is a MacBook 13in 10.5.8 and I've never had any problems with it. I keep it up to date with any of the updates needed and I recently put MacScan on there to make sure there wasn't any funny business going on. I've noticed lately that it s