Report for failed CATA entries

Hello Experts,
Is there any standard report to derive the CATA error log for entries which have failed to post to respective modules?
Thanks & Regards,
Preshit.

If the posting is done automatically by batch job then you should just need to check the output spools (or have them setup to be mailed automatically when it is run).
If this isn't possible then you'll need to check manually, and it varies depending on the target system.
- HR: run CAT6, which is CATA but specific for HR. Choose the relevant re-run options and execute. Any errors will be output in the log.
- Finance: similar to HR, use CAT7 and post all the documents. The output log can be extracted and will document all the errors
- Project Systems: depending on where the error occurred, either re-run the postings via CAT5 or (if the error was at the point of calculating costs against the project) use transaction COFC which will list all the errors in calculating project costs (in this case the document has been successfully posted from CATSDB to Project Systems, but the next stage has then failed and so the process is incomplete).
Regards
Simon

Similar Messages

Report for Good's Entry /Service Entry Pending for Material's/Service's

Dear Folks,
I would like to have report for the Invoices Pending of order's by Service Entry /Good's Entry .
Please share the T.Code to suppose the Same?
Thanks,
Peer Mohamed

There is no standard report available in SAP. you will need to develop a custom report for your requirement.

Report for failed delivery with reasons

Hi all,
Maybe i am blind, but I cant find a way to do an automatic report or email a report for bounced emails with details.
So I need to get a report with the email address, message number and the reason for the bounce or failure for Example: bounced by destination server. Reason: 5.1.0 – Unknown address error ('554',
Any where I can do this?
I see the bounce logs have this information, but short of ftp'ing this daily then writing a script to email this out I cant see how to do this.
It would be nice to just have a daily email report
Regards
Adam

On box - no easy way that I can think of other than what you've mentioned. You could however accomplish this (as well as any other custom reports you would want to create) with SawMill (https://www.sawmill.net).
This used to be used heavily back when the WSA was first released as on box reporting wasn't up-to-par. However, it can be used for the ESA as well.

Standard SAP reports for detailed Service Entry Sheet data

Hi All,
I am searching for standard SAP reports to extract the detailed Service Entry Sheet data out of SAP. For example, I need the deailed information like Service Entry Sheet Number, Purchase Order Number, PO line item number, short text, Posting Date, External Number, Service number, Quantity, Gross Price, Cost Object (Order or Network or WBS), Personal Number (if applicable), workday. I couldn't find any standard report. So if anyone know it, please help me.
Thanks,
Ting

Hi,
In ME2S also you can get good report by execution and by clicking SO/ PO number.( where cost object can be viewed)
If you are very much specific, go for development
Regards,
Biju K

Portal Report for failed login attempts

Hey Gurus,
I've some doubts regarind the login mechanism of SAP Portal.
1) Is it possible to capture the failed login attempts for a portal?
2) Is there any standard report available where we can have the numbar of failed login attempts to the portal for a specifc user?.
Say, If a user is trying to access portal. Firts attempt - Failed, Second attempt - Failed Third attempt - Success.
So is it possible to capture these two failed login attempts by standard way and display it to administrator thru a report?
Regards
Abhinav

SAP Security Audit can be used

Report for counting transactions (entries) on accounts

Does anyone know of a specific report that will give you the number of transactions or entries posted against a GL account (or types of acounts such as revenues) during a period of time.

BSEG table holds the information, but with a little bit of processing. This table needs to be linked with the header table BKPF, to get the period.
Or run this standard report S_ALR_87012291, to see if you can get the required number of transaction for an account and period.
FBL3N can also yield similar information. Restrict by posting dates.

Report for unreleased service entry sheet

Hi All
Is there any report where I can get list of service entry sheet numbers which are yet to be completely released.

Hi,
Use t.code ML85 and select the round box of Not Accepted under Acceptance Indicator TAB and execute and get list of unreleased SES under release code.
Or Go for a development with help of ABAPer.
Regards,
Biju K

Custom Error Report for Truested Recon in OIM 11.1.1.5

Hi,
We are planning to have a custom scheduled task to generate csv report for failed recon events. We have some 4 trusted recons (2 custom + 2 GTC) in our environement. Does a DB query would be sufficient to meet our requirement. If yes please suggest the tables that we need to consider. Please suggest whether it is a good practise and has any one implemented such before ?
We cannot go far any tool like BI publisher now so any means of generating report through custom code would be helpful.
Thanks,
DK

The RECON_EVENTS and OBJ table will be sufficient to know which resource object the recon event was for, and the status of the recon event.
-Kevin

No authorisation for Infotype0002 in cats entry

Hi All,
the project that i am working has juxt gone live today however we are facing a difficulty in CATS
There users who cannot enter into CATS entry screen
After making entries in the required fileds like DATA Entry Profile, Key date and Personnel Number it does not go to the next screen to enter the time
The error says no authorisation for Infotype 0002
we have set up same authoriiation t works fine in quality server and does not in Production
we right now checking if me missed any transport requests or do we have to change any config
the data that needs to be taken for the fields in cats screen is taken from IT0001
No one can view their personnel data,
i ahve checked the configs they seem fine in the quality and are similar in Production dunno where did we go wrong
Please help its very very urgent
Regards
Siri

Hi Siri,
1. Have you triesd the Tcode SU53 to see if additional authorizations are required?
2. You can also verify by runnning the report RPLFST01 & see if you are able to retrieve any PERNRs.
Regards,
Suresh Datti

Crystal Report Viewer fails for browser versions =10

We're using the Crystal Reports for VS2010 SP2 and get the following error when trying to generate a report in Firefox 10.0.2 and Chrome 18.0.1025.11 beta-m:
[NullReferenceException: Object reference not set to an instance of an object.]
   CrystalDecisions.Web.ViewerGlobal.get_IsNetscape6Up() +88
   CrystalDecisions.Web.CrystalReportViewer.Render(HtmlTextWriter output) +83
   System.Web.UI.Control.RenderControlInternal(HtmlTextWriter writer, ControlAdapter adapter) +27
   System.Web.UI.Control.RenderControl(HtmlTextWriter writer, ControlAdapter adapter) +8991378
   System.Web.UI.Control.RenderControl(HtmlTextWriter writer) +25
   System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +208
   System.Web.UI.HtmlControls.HtmlForm.RenderChildren(HtmlTextWriter writer) +173
   System.Web.UI.HtmlControls.HtmlContainerControl.Render(HtmlTextWriter writer) +31
   System.Web.UI.HtmlControls.HtmlForm.Render(HtmlTextWriter output) +53
   System.Web.UI.Control.RenderControlInternal(HtmlTextWriter writer, ControlAdapter adapter) +27
   System.Web.UI.Control.RenderControl(HtmlTextWriter writer, ControlAdapter adapter) +8991378
   System.Web.UI.HtmlControls.HtmlForm.RenderControl(HtmlTextWriter writer) +40
   ASP.app_filters_reportviewer_aspx.__Render__control1(HtmlTextWriter __w, Control parameterContainer) in c:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\qfmui\10eb2bd5\d0d0d3a5\App_Web_e2fg2prg.2.cs:0
   System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +109
   System.Web.UI.Control.RenderChildren(HtmlTextWriter writer) +8
   System.Web.UI.Page.Render(HtmlTextWriter writer) +29
   System.Web.UI.Control.RenderControlInternal(HtmlTextWriter writer, ControlAdapter adapter) +27
   System.Web.UI.Control.RenderControl(HtmlTextWriter writer, ControlAdapter adapter) +8991378
   System.Web.UI.Control.RenderControl(HtmlTextWriter writer) +25
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3060
If I change the user agent string in Firefox to that of Firefox 7.0.1 everything works as expected, this implies there is some logic in get_IsNetscape6Up() which is failing because the major browser version as reported by the user agent string is two digits instead of one.
We encountered a similar issue for our legacy pages containing Infragistics 2007 controls but were able to fix that by overriding the System.Web.Configuration.HttpCapabilitiesBase.BrowserCapabilitiesProvider and faking the browser version to 9.80. Crystal Report Viewer is apparently not using .Net's built in HttpBrowserCapabilities object, is there anything else I can adjust to stop the viewer failing?

hello Robert
Today must be my day. I already got a reply from PM (normally it takes a "bit" longer...). Anyhow, here is what he said:
With Firefoxu2019s release cycles, I donu2019t think weu2019ll be able to officially support the latest versions
of Firefox at every service release. We do our best to test the released versions of Firefox
that align with our releases. I donu2019t know the details but Iu2019ve heard there is a plan in place where
the support team(s) (?) will test the most recent releases of Firefox with whatu2019s currently
shipping by SAP and log bugs as necessary.
(umm, this is my - Ludek note here ) -> news to me re. support doing QA... find out something new every day. Anyhow, continuation of the message from PM:
The current plan for CR for VS2010, the SP3 release (expected in April) will support up to
Firefox 9. If there are reproducible bugs in Firefox 10 (or higher), then please enter a bug
and escalate and it will be investigated for the next available release.
I'll revisit this once SP3 is out there and do an escalation for Firefox 10 - ok?
- Ludek

How to submit a bug report for OSB? - restore fails if number of items per page is changed from the default of 30

In the OSB web gui, one of my users found that if the number of items per page is changed from the default of 30, the restore of the file will fail. He tested this using recent versions of Firefox and IE. We have verified this to also be the case using Chrome.
In a directory containing over 100,000 files, moving 30 at a time to find the one to be restored is a very frustrating user experience.
How do I file a bug report for this issue? Is there a workaround for this bug to enable my users to more easily find the file to restore without being restricted to the default of 30 items per page?

Yes there is a bug in the webtool in the current release. You can use the commandline obtool to do the restore, that is much faster and works fine.
Thanks
Rich

Test Connection failed in Crystal Reports for Eclipse using SQL Server 2008

I installed an SQL Server Express 2008 on my local PC (Window XP SP3). I downloaded sqljdbc4.jar to Crystal Reports for Eclipse
IDE library path and tried to Test Connection, but got the Ping failed message : The TCP/IP connection to the host localhost, port 1433 has failed. It said that check that an instance of SQL Server is running on the host (I saw SQL Server SQLEXPRESS is Running on my PC) and accepting TCP/IP connection at the port (I enabled TCP/IPin my PC's SQL Server Network Configuration),
and that no firewall is blocking TCP connection to the port(I turned OFF Window Firewall on my OC). Can anyone tell me how can I fix this problem ?

Hi,
Check the below thread also:
http://scn.sap.com/thread/1634856
Thanks,
DJ

Audit Report Fix (Manual Journal Entries for Inventory)

Hello!
Curious if anyone has been able to fix an inventory audit report using journal entries?
For example: if an item was on inventory account 1500 based on it's item group assignment, then say 20 items are received for $1 each, then 5 are sold at $1 then the item group is switched and now it has an inventory account of 1520 and 5 more items are issued out.
Running the audit report summarizing by accounts will show $15 as the balance in 1500 and -5 in 1520. So when we go to actually check the accounts to reconcile them at the end of a period, our inventory accounts are always off.
I have identified manual journal entries meant to 'fix' a GL account, but these have made the audit report basically unusable for reconciliation.
Is there a way to journalize a change in the inventory accounts while making the change occur in OINM as well??
I have looked through several expert empowerment sessions that acknowledge this as a problem, but do not offer any solutions.
Thanks!
Mike

Hi Mike:
Changing Item groups while inventory is on hand is a problem. I have found a way to correct this, but it is a multi step process. I would try this in DEMO first to make sure you get the proper results.
Try this.
Below is the procedure for correcting the G/L Accounts on your Inventory Audit Report It is complicated and needs to be performed when no other users are in the system. Journal entries will not correct this problem.
Here it is.
1.     Review Inventory Audit Report by Summarize by Accounts for the item.
2.     Do a Misc. Issue to remove the inventory.
3.     Review Inventory Audit Report again.
4.     Change the Acct # on the Item Group for the Inventory Item to match the negative value account number. CAUTION! Make sure that users are not performing transactions on the system when you do this.
5.     Do another Good Receipt for 1 each at price shown in Negative value account number. Enter as a positive number.
6.     Re-run the Inventory Audit to confirm that the negative account has been zeroed out.
7.     Change Item Group Inventory account to remaining positive value account number.
8.     Do an Inventory Issue for quantity of 1 each.
9.     Re-run the Inventory Audit Report for the item. All accounts should now have zero value.
10.     Change Item Group account setting back to correct account for future.
I hope it works for you.
Regards,
Vicki Smith

Report for Service Entry Sheet in MM

Hi all,
Is there standard data source & infoproviders are available for "Service Entry Sheet (ML81N)".
We need to develop a report for service receipt confirmation along with PO & Vendor payment details.
Looking forward your answers.
With regards,
MK.

HI,
Yes, WBS wise PO details showing in T-code ME2J - Purchasing Document Per Project .
Enter the above T-code and select Database Profile ' 000000000008-PO Display for WBS' then give inputs project code,WBS Element,plant,Scope fo List-'ALV'.and execute the report. Now, report showing the selected WBS Purchase documents.
Hope, it is useful for you.
Regards,
K.Rajendran

How to add column to report for entry

what does it take to add another column to a (classic) report?
I added a column to the table and view and now I need it to be in the report for data entry.
That's the problem. I got as far as getting the column in the report which was as easy as
adding it to the query, but it is not shown as
a field that could be entered. So I'm missing something. What distinguishes a field that
is enterable from a field that is not enterable? I don't see where that information is held.
similarly if I try to add a validation for it the new field does not appear in the list as it is not
viewed as a crud field. What gives it the crud magic?
I'd really appreciate it if someone can tell me.

Never mind I figured it out on my own.
(No I cant believe it either.)
Having added the column to the select statement,
What makes a newly added tabular form column be viewed as updatable is
what is in the Display As entry. (I think). Such as Text Field
or Datepicker. Those are updatable. But display as text is not updatable.
But I suspect it is also necessary under report attributes for the column
to have these filled in also.
reference table owner SOME_SCHEMA
reference table name SOME_TABLE
reference column Name COLUMN_NAME

Report for failed CATA entries

Similar Messages

Maybe you are looking for