Report for field sammg and refnr in two step picking

Hello Experts,
I have configure two step picking which is working fine.
But my concern is when I create a group from deliveries using VL06P, an five digit number (23717) is generated. But while putting same group number in LT72 screen for analysis or doing LT0E, I am getting en error that "this group number is not existing in system.
Then I have to go to SE16 and search in table T311. Then I found that there are two group number in this table which technical name are REFNR and SAMMG. So I have to pass 23717 in SAMMG field and note down the number (17) from REFNR field and process with REFNR number.
So is there any report whether I can get the same (when I pass SAMMG number I will get REFNR number) because my business user don't have access to SE16 again it is not acceptable to business.
Or is there anyway by which I can assign same number to both SAMMG and REFNR, so that my client will refer only one number in stead of two number.
I am hereby attaching one test data. Kindly go through it and revert to me with your analysis.
Best Regards,
Raghu Nayak.

as an standard SAP you should be able to process the group number(23717) it seems there is some other setting / customization or you are following any additional steps in your system which generates the another number in Group (REFNR) field of T311 as in my case i am getting the same number in both the Group field
Have a look on the below mentined existing wiki which was shared earlire by SCN member Susheel Tiwari / Pankaj Agarwal
Two Steps Picking Process in SAP-WM

Similar Messages

Report for daily production and daily sales quantities

Can you Please any body let me know what fields and tables should I pick to generate a report for sales qty and production qty for a material on daily basis. we are using PP PI

Hi,
You can use table MSEG for that purpose. Try BUDAT-MKPF as one of the selection parameters and use
MBLNR-MKPF = MBLNR-MSEG
MJHAR-MKPF = MJHAR-MSEG
Sort the results in ERFMG-MSEG and ERFME-MSEG using
BWART-MSEG = 101 minus 102 (for production)
SOBKS-MSEG = E
BWART-MSEG = 601 minus 602 (for sales).
Above stuff might be useful to you for your development requirement provided you are having Sales Order specific production.
Thanks & Regards,
Abu Arbab A

Report for Asset number and its Purahcse order number

Hello Friends,
Please give me details of report for Asset number and its Purchase order number .
Regards
Nilesh Vakil

hi,
GO to ME2N...
use SHIFT + F4..
there check for the acc. assign cata. field and input the asset and execute..
Regards
Priyanka.P

Drill Down reports for Profit Centers and Segments

Hello Experts
I would like to down load the "Drill down reports for profit center and segments". I have found standard SAP documentation through (http://help.sap.com/erp2005_ehp_05/helpdata/EN/46/f6fc4e7a7569b5e10000000a114a6b/frameset.htm ).
As per the given guidelines, i have beening trying to down load from client 000, the spool request is showing finished (with out any error and in one / two seconds) .. but the reports are appearining in SAP Easy Acess.
I have checked with Basis team, whethere i have restrictions with my userid. Even with Basis id also, we are being unable to activate these reports.
Does it required any configuration / licence issues before i need to lookinto before download?
Kindly revert
Regards
Anil Kumar

Hello Experts
This is solved. However, i am mentioning the solution here for further references
Before downloading the drill down reports, we need to activate the business funciton "FIN_GL_CI_1" through T.Code SFW5
Regards
Anilkumar

HT4314 I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

Hi Jamesdwills,
Welcome to the Support Communities!
If you are using the same Apple ID on both devices, the Game Center profile should be the same.
Check out this information from the iPad User Guide. Try signing out of the Game Center on both devices and then sign back in with the correct Apple ID:
Using Game Center
http://support.apple.com/kb/ht4314
Game Center settings - iPad User Guide
http://help.apple.com/ipad/7/#/iPad9a13d039
Game Center settings
Go to Settings > Game Center, where you can:
Sign out (tap your Apple ID)
Allow invites
Let nearby players find you
Edit your Game Center profile (tap your nickname)
Get friend recommendations from Contacts or Facebook
Specify which notifications you want for Game Center. Go to Settings > Notifications > Game Center. If Game Center doesn’t appear, turn on Notifications.
Change restrictions for Game Center. Go to Settings > General > Restrictions.
Cheers,
- Judy

Standard report for cheq incomming and chq ougoing.

Dear All,
urgent one please.
Is any standard report for cheque incomming and cheque ougoing with document wise.
if so pls suggest me.
awaiting your valuable suggestions.
Thanks & Regards,
satishkumar.m

Hi,
my doubt is in.tr.code fb02 and after putting doc type bp(bank payables) after executing that i will get screen showing details ie., doc no., year, type do.date and posting date.
my client wants outgoing cheq details ie., to who we have issued the cheques with cheque no, date, and bank.
if we go to drilldown report of fb03 we r getting but each and every entry they cant go and drilldown it..
we cheked in fchn but that requirement wont suit to my client..
can any one suggest me.
thanks & regards,
satishkumar.m

Find table reference for field FAEDT and ZINSZ

Hi all,
can anybody tell me the table name for field FAEDT and ZINSZ
Thks
Shailesh

Hi,
Try in this table J_3RFTAX_EXTRD
34th FAEDT and 88th ZINSZ
Regards
Bala Krishna

Where can i activate a delivery report for my sms and mms?

where can i activate a delivery report for my sms and mms?
I dont seem to find it on my Iphone 5.
Its unacceptable!
Also a sound for missed calls seems to be missing to !!!
Unacceptable!
Can somebody help me please?
[email protected]

Unbelieveble and unacceptable.
Every simple phone has a delivery report....
Big dissapointment
Iphone never again.
thanks anyway

Standard report for Reconciliation report for Asset Accounting and GL

is ther any standard report for Reconciliation report for Asset Accounting and GL

hi
functional specification r reqired for this issue
regards
venkataswamy

I have purchased the Acrobat pro subscription for 1 year and have followed the steps to install it. But when i go to start it, It crashes and it does this every time! I have restarted my mac pro and also restarted in safe mode but it just doesn't work! PL

I have purchased the Acrobat pro subscription for 1 year and have followed the steps to install it. But when i go to start it, It crashes and it does this every time! I have restarted my mac pro and also restarted in safe mode but it just doesn't work! PLEASE HELP!!

Hi jim1287,po
Check for the latest updates. Installing latest updates should resolve this problem.
Also, try to ran disk repair using safe mode in Mac, for instructions please visit: http://support.apple.com/kb/PH14204
Try enabling root user profile on mac and try to check. OS X Mavericks: Enable and disable the root user
Regards,
Ajlan Huda.

WM - Two Step Picking

Hi experts,
I have a problem with a program I'm creating.
In this program I'm doing a call transaction to LT03 for an outbound delivery.
When I do that, the message number L3 720 "2-step picking relevance will be removed since no relevant group" which is normally a Warning Message is appearing as an error message.
When I go through debugging, in the code, it also appears as a warning message, but when I execute it online it appears in red.
Does any one has an idea on that issue ?
Thanks in advance.
Best regards,
Remi

Hi,
Thanks for your reply.
All the materials go through a two step picking process in my business process.
So each time I create a picking process, It is put in customizing that the field "Relevant for 2 step picking" is marked by default.
The problem that I have is when I want to do a picking without the 2 step process.
It is a warning standard message, and It's working fine online but when I'm doing it through function module L_TO_CREATE_DN, instead of a warning message, the systems shows it as an error message and does not let me go through the rest of the process.
Moreover when I go through the debugging function the message is MESSAGE W720 where W is "Warning".
I don't understand why online, the system gives me a warning message and through function module, the system gives in the code a warning message that appears as an error message on screen.
I anyone has an idea it would help me.
Thanks.
Remi

TWo-Step Picking

Hi,
We have a requirement to perform two step pick - that is the system needs to create Two TO's
1. one for the picking material from the racks into a interim location in our case it would be Tub's - so the first part is confirmed when the material gets picked from the rack into tub.
2. Once the material is all picked the tub's are moved into Packing area -- where the material is once again verified and packed and in this process the user confirm the second leg. which moves it into the interim storage type of 916
3. After the two to's are confirmed they system should let the user perform the PGI.
I did check the documentation for Two-Step Picking on the SDN and have done the config accordingly but now the system is throuwing up error while converting the delivery into TO it says the grouping has not been done.
Not sure what am i missing - could you let me know the steps that need to followed to get this working.
Regards
Havish

Hi Sudhir,
Thanks for the reply, I did create a Group for type " K ".
The above error comes up while creating the TO (for stock Removal), but srprsingly when i run the LT72 it says the group does not exist.
I have done the following:
LE> WHM-> Activities->Transfers-> Set Up 2 Step picking --- put in the details for the WH as required
LE> WHM-> Interfaces--->Shipping ---> Two-Step picking -
put in the details for the WH as required
Created a Delivery --- VL10b
Created A group for the above delivery -
VG01
Now when I check for Group under LT72 is says the group does not exist
also when i try to create the TO for the group it throws up the as per my earlier post.
Could you guide me what is the mistake am doing
Regards
Havish

Two step picking modification

Hi all,
Three simple questions on two step picking:
1) When I delete a pick TO inthe first step of two step picking process the status of pick step on the group still reamains completed and I cannot create pick TO again. How to sort out this?
2) If the pick TO is not created yet I'd like to add another TR to the group. But I didn't find a change group transactions. Once the group is created, it looks like no modification is possible but editing two step relevance on some group's item. How it is expected to do this?
3) How to set a storage type not relevant for two step picking? I've seen that only materials can be set as relevants for two step picking.
Best Regards

Hi
Let me explain how two step picking works
Within the 2-step picking process the first step can be repeated many
times because changes of the assigned deliveries may occur or the
requested quantities are not completely available the first time but
the 2nd step the actual picking is done once and marks the completion
of the process. This cannot be repeated for the reference number. If
there are individual delivery changes the TO can be created using LT03
but the multiple processing is no longer possible.
TO confirmation takes place only when the stock is completely moved.
It would not make sense to confirm the movement and then to the
allocation step. The two-step picking process is
1. Pick step (Where stock is picked from the source bin)
2. Allocation step (Where stock is allocated in the destination bin)
3. Confirmation (Where the picker confirms that the movement has been
completed)
You either carry out the first two steps seperately (2 -step picking)
or at the same time. Either way, the confirmation always takes place
last. Hope the above helps to clarify.
Regards,
Ramana
Edited by: A.L.V Ramana on Dec 18, 2009 1:05 PM

Two-Step picking in Lean WM.

Hi all!
Is it possible to configure two steps picking when you have a Lean WM implanted? My client wants to explore the possibility to use this functionality in his warehouse, but he has a lean WM, not a full one.
I have configured IMG --> Logistics Execution --> Warehouse Management --> Interfaces --> Shipping --> Two Step Picking
In my tests, I have grouped the deliveries and when try to create the correspondent TO, system sends a message saying that it is not possible in a Lean WM.
We are using SAP ECC 6.0
Thanks for any help.

Hi
Lean warehouse management implement for the warehouse where proper storage bin (High rack structure or location management) are not available and user want to do the picking using pick list. In this case there is a dummy bin defined in the system which helps the user to group the deliver and create a transfer order.
To leverage the 2 step picking functionality of warehouse management you should have proper location management ( Warehouse management) activated.
Hope this will help
Regards
Manish

Warehouse Managment (Two-Step Picking)

Hi,
This is with reference to Two-Step picking procedure, which is not getting activated. Though we have done all customization required for TR and Deliverys as well, as referred in the documentation provided by the SAP. The settings done are as follows.
01)     Activation of Two-Step picking at WM Global level.
02)     Transfer Requirement control
03)     Transfer type control
04)     In article master, relevant for two step picking.
05)     At Storage type search level.
Now when try to initiate the process with transaction LT41 putting shipment type i.e. A (Stock Removal) system displays a message No data available for the specified criteria or if thru LT0E, system asks for a group in WM.
But when we go and try to create the single TO thru Delivery using t_code (LT03) system displays an information message, i.e. Two step picking relevancy will be lost.
Regards,
Aquil Husain

Hi Aquil
Have you set up Group processing for TR and Deliveries?
In order to manage 2-step picking you have to work with groups / collective picking
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm
Have a look at the help to review the process
Regards
Steve

Report for field sammg and refnr in two step picking

Similar Messages

Maybe you are looking for