Report for Gross Orders

Hi All,
I would like to create a report for a specific date for Gross orders.
Is there any way?
Thanks in advance.
Regards,
Rianka.

Hi,
Yours is a special requirment for which a customized report can be prepared with the help of your ABAPERS .
you have to decide how you want the programe to respond w.r.t your Input fields and what is the formate of output , then based on that you need to create and give Functional specifications (FS) to your Abapers.
In FS  you have to draft a process logic using Feilds and corresponding tables.
Please ref. SAP.Help for more Information w.r.t  FS.
reagrds
DSR
Edited by: D.Srinivasa Rao on Nov 11, 2011 12:58 PM

Similar Messages

  • Report for open order and shipped qty  summary

    Dear Folks,
               Can any one please help me.
    Report for open order summary Vs shipped quantity
    what are the related programs to it.
    throw some light on it.

    >
    arpita b wrote:
    > Dear rohit
    >    
    >     Iam asking about any report which compares or give details of open order vs shipped qty.
    >
    > Any sis report is available for this?
    Hi Arpita,
    There is no such sis report available. You will have to configure and create two seperate reports and do the comparison.
    If you want, I will send you the list of all T.codes used to generate reports in SD.
    Revert back to me if you need the same.
    Regards,
    Swapna D.

  • How to create a daily report for sales order

    hi
    how to create a daily report for sales order. what fields it must consists of. what are the tables it need?

    Hi
    You have to use the sales order tables VBAK,VBAP and VBEP
    So keep date field on selection screen
    and treat this date as Order creation data audat field in VBAK.
    based on this fetch the data from VBAK and VBAP  with the following fields like
    VBELN, KUNNR,NETWR,POSNR, MATNR,ARKTX,KWMENG,WAERS  etc and display in the report
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • Interactive Report for Pending Order

    Hi Gurus,
    Iam new to ABAP.
        I have Requirement to display the Interactive Report for Pending Order Status Report which displays pending of purchase orders for material wise and Vendor wise .Using ALV. Can Any one help ...me which table data i need to read and what are the field required.
      Thanks in advance.

    Hi G K,
    For pending order : VA05 (select open sales orders).
    cheers,
    Hema.

  • Report for internal order - year/period comparison

    I want to create a report for internal orders with year/period (from/to) comparison.
    For the present year/period i'm using CCA variables  1YRPERF (Fiscal Year/Period From) and 1YRPERT (Fiscal Year/Period To), created from field FISCPER, table RWCOOM.
    Now i want to creat a column fot the n-1 period (example: if selected current period as 009.2013 to 008.2014 the n-1 period will be 009.2012 to 008.2013), any suggestion what can I do about this?
    Regards
    Carlos Aguiar

    Hi Ajay
    This is for higher education institution that have to report by fiscal year (01-12 months) and by academic year (09.year1 to 08.year2). I have two maps to do this but the challenge is to have a unique map that by dates could retreive both information.
    I need a to have a column giving the total for example the Per/Yr 009.2012 to 008.2013 and other column with the Per/Yr -1.
    I've tried your first option but doesen't work at all because don't work with a period like 009.2013 to 008.2014. Then i made some adjustments: first column was setted to Yr (variable: 6-GJAHV to 6-GJAHB) and Per (variables: 1NPERIV to 1NPERIB). The second column was setted with Yr (variable: 6-GJAH2 to 6-GJAH2) and Per (variables: 1NPERIV to 1NPERIB). Seems to work with a few tests!
    Also i tried to creat new variables "1YRPERF" / "1YRPERT" to n-1, but had some problems with formula.
    1YRPERF have a formula: '#S012-999' and 1YRPERT formula is: '#S012'.
    To 1YRPERF-1 i've defined the formula '1YRPERF' -1, and for the Per to the formula '1YRPERT' -1, but seems to consider minus 1 period that the entry period. I've tried with -12 but didn't work too.
    Thatk's for the help!
    Regards, Carlos

  • Report for Maintenance orders-Plant Maintenance

    Dear all,
    I have some maintenance orders, in that i have done cost settlement  for few orders through KO88.I want to take a list of  settled and not settled maintenance orders.
    Is there any standard SAP reports or any way to findout setlled /not settled orders.
    Thanks in advance
    Guna

    Hi,
    you can use the T code S_ALR_87013015 - List: Actual Debit/Credit in this you can specify the order group or use multiple selection for orders and excute you can find which order got settled and which order has balance. if it is helpful pls reward me with points
    regards
    satish

  • Report for Purchase Orders didnt reach target through ALE

    Hi Experts,
    we are sending Purchase Orders to Third party system using XI.
    But some of the orders when we save its automatically  system generating output medium is PRINT so these orders not going through ALE.
    1)Can anyone please tell me why the system is generating PRINT instead of ALE distribution.
    2) is there any report for how many purchase orders created for the day and how many of them gone through successfull using ALE distribution.
    Answer will be rewarded.
    Kiran

    Hi
    Have you configured the PO Output type/messages with the Medium as 'A'(ALE)
    otherwise the system willd efualt take 1(print) as default medium.
    Check the NAST table entries for that date created Output type of PO's
    for all of them the Medium(NACHA) field should be A
    then all will go through ALE
    check them.
    Regards
    Anji

  • Report for purchase orders - like ME80FN

    Hello,
    is there a way to get a report of purchase orders which have been released for stock and for customer orders.
    I tried ME80FN, but there is no column available such like account-assignment-category where I could separate the orders for stock from the customer ones.
    Any ideas?
    Thx a lot!
    Cheers Wolf.

    account assignment category is available in dynamic selection
    So you can at least execute ME80FN per account assignment category, even the field itself is not shown in the final report.

  • Report for Production orders with name of Customers

    Dear Expert,
    Kindly suggest to view the production orders with customer numbers for which the sales orders is created.
    I tried in MB51 with layout settings but the customer number comes out be blank despite the sales order number is populated for an production order.
    Kindly suggst a way or any report in the system  to get the corresponding information of production order number and corresponding customer name mentioned in the sales order .
    Thanks in advance for your help and inputs..
    Best regards,
    Nitish jain

    Nitish,
    MB51 is a Material Document list.  Many production orders exist that have no entries in this report, so it would be an unlikely candidate to be a solution for your requirement..
    The standard production order reporting tool is COOIS.  The output for MTO orders can be configured to display Sales order and Item and Soldto.
    Obviously, displaying even the customer order number in COOIS is impossible in a MTS scenario.
    In addition, a user experienced in using SAP Query  (SQVI or SQ01/SQ02/SQ03) could also create a production order report without having to know ABAP, by properly linking tables AFKO, AUFK, AFPO (production order data) with VBAK (sales order header data) to get customer number, and KNA1 to get customer name..
    If you are not expert in SAP Query, I suggest you discuss this requirement with a local ABAPer.
    If you are feeling like educating yourself in the wonders of SAP query, try this doc.  Although old, SAP query hasn't changed very much since this document was written.
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVQUE/BCSRVQUE.pdf
    Rgds,
    DB49
    Edited by: Dogboy49 on Apr 20, 2010 10:47 PM

  • Missing Parts report for Purchase Orders

    Hey Gurus,
    We are running the availability check for Purchase orders and the user group is wondering if there is a standard Missing Parts report in SAP similiar to transaction CO24 for Purchase Orders so that they can view all of the Purchase orders with missing parts.
    As a side note,  we are using subcontracting purchase orders.

    didn't get a response.

  • I need help in Report for production orders for my customer.

    Hi All
    I have scenario where plant A needs the following report for Material XXX which has setting as Stock Trnasfer order from Plant B.
    Need report withthe following details, Storage Unit number, Material No, Quantity, Planned Order Date in plant A,  Date Produced in plant B, Date Received by Plant A. 
    Please tell me if there is any standard report to take the following details. Scenario is that the header material YYY in Plant A has one material XXX as BOM component. Now this material has setting as Stock transfer from Plant B. On creating a plan order for Header material it will create a Plan order in plant B for component XXX. The above said detail is required for component XXX in plant A.

    Dear
    Did you explore the report in CO46-Order Progress Report based on Sales Order /Material /Production Order
    Or COOIS/COHV  for your requirement.Here you can get the Planned Order Details and also Production Order Details .
    Regards
    JH
    Edited by: Jiaul Haque on Sep 27, 2010 2:57 PM

  • Report for Sales orders with the consumed credit limit value

    Dear Gurus,
    In my company, the credit check is at sales order level. We want a report which shows up the credit value consumed from the credit master by Sales order.
    Going into the details, Say Credit limt is setup for a customer at Credit master for 10000 $.
    I want a report showing Sales order 59235 has consumed 500 $, Sales order 59277 has consumed 1500 $, Sales order 59333 has consumed 2500 $.
    Is their a report in standard SAP for the above functionality. If not, any ideas of how to achieve it?
    Thank you for your responses.
    Regards,

    Hi,
    Try the following transaction codes
    S_ALR_87012218
    FDK43
    F.31
    But if you want to a report like what you explained in thread i think in standard not available we need to develop a customized one.
    Regards

  • Report for sales order

    I need to create a report for all sales order that have line items with a Material Tax Class '2' - One time exemption. Tax will require a report that identifies/displays all line items with Tax Classification = '2'.
    Report layout specifics:
    Bill-To
    Ship-To
    Order No.
    Tax classification
    Internal Item Notice Text.
    For bill-to, ship-to, order no are all fields of structure KOMK, but I need to know which table it comes from so I retrieve the data by a select statement to display this. Can anyone guide me on this ? Thanks in advance !!!
    Nimesh

    I dont know where that tab is either. I will have to find out and let you know. For now I just left it out and I have written the following code - please let me know if this looks right according to the requirement.
    REPORT ZMAT_TAX_REPORT .
    TABLES: VBAK, VBPA, VBAP, MLAN, KOMK.
    DATA: begin of jtab occurs 0,
            kunnr like vbak-kunnr,
            vbeln like vbak-vbeln,
            parvw like vbpa-parvw,
          end of jtab,
          wa_vbak like vbak occurs 0 with header line,
          wa_vbpa like vbpa occurs 0 with header line,
          wa_vbap like vbap occurs 0 with header line.
    PARAMETERS: TAXM1 like MLAN-TAXM1 default '2'.
    select single taxm1 from vbap into vbap-taxm1 where TAXM1 = MLAN-TAXM1.
    if sy-subrc eq 0.
      if vbap-taxm1 = '2'.
        select single * from vbak into wa_vbak
                        where kunnr = komk-kunre.
        select single * from vbpa into wa_vbpa
                        where parvw = komk-kunwe.
        select single * from vbap into wa_vbap
                        where taxm1 = mlan-taxm1.
        move wa_vbak-kunnr to jtab-kunnr.
        move wa_vbak-vbeln to jtab-vbeln.
        move wa_vbpa-parvw to jtab-parvw.
      endif.
      if sy-subrc eq 0.
        if not jtab[] is initial.
          write:/(95) sy-uline.
          format color col_heading intensified on.
          write:/1 sy-vline,
                 2 'Bill-To',
                 21 sy-vline,
                 3 'Ship-To',
                 21 sy-vline,
                 4 'Order No.',
                 21 sy-vline.
          write:/(95) sy-uline.
          loop at jtab.
            write:/1 sy-vline,
                   2 jtab-kunnr,
                   21 sy-vline,
                   3 jtab-parvw,
                   21 sy-vline,
                   4  jtab-vbeln,
                   21 sy-vline,
                   95 sy-vline.
          endloop.
        endif.
      endif.
    endif.

  • What is equivalent ASCP report for Planned Order&Order Reschedule Report

    What is equivalent report for Supply Chain Planned Order Report & Supply Chain Order Reschedule Report
    We are currently on MRP and running Supply Chain Planned Order Report successfully. We are planning to go to ASCP(Decentralized) next month ,what is the equivalent reports in ASCP?
    Edited by: SanDan on Jan 9, 2013 1:57 PM

    Hi ,
    You can explore the Planning Detail Report which you can run against your ascp plan. However there are few standard reports available in ascp. I suggest you can explore option of building custom report which will be best suited to your business needs (i.e. using Discoverer or if you are also implementing obiee you can build a custom report based on standard views or noitex views (- for ascp)
    Regards
    narendra

  • Report for Sales Order Change History   CDPOS and CDHDR

    How to take a report of the data for the Sales Order Change history for a particular period of time. It is required to take a report of all the Sales Orders for which the basic price has been changed. Please let me know the procedure. I could not get the data from the table CDPOS and CDHDR
    Helpful answer would be rewarded.
    Regards
    Praveen

    Dear Praveen Kumar
    Have you tried with VBAP where sale order details at item level would be stored.
    Moreover, to my knowledge, there won't be any changes as for as pricing is concerned at sale order level but there is at billing level.  Normally, any price increase / decrease would reflect in billing.  So why dont you to table join through SQVI VBAP (for sale order details) and VBRP (for billing details) so that you can compare the selling price in sale order with billing. 
    Thanks
    G. Lakshmipathi

Maybe you are looking for

  • Server index page not coming up on any m/c except server installed m/c.

    Hello All, I have installed NW 7.0 SR3(SP14) stand alone  JAVA WAS. Every thing went fine but when i try to open index.html page of server from any machine i cant open it but it ends up in error" Page Cannot be displayed" But i can open index.html pa

  • Loading various addresses in CRMXIF_PARTNER_SAVE_M

    Hi, Can I upload multiple adresses in E101_EI_BUPA_POSTAL_ADDRESS and E101BUS_EI_STRUC_ADDRESS while uploading BP data through LSMW? if so, then how do we distinguish lets say Invoice to part address/Sold to party address... etc while populating the

  • NODIM help

    hi Guys    I need to know the NODIM functionality...I mean , I already knew that NODIM will supress the Units and Currencies ...One of my report has the order 100005555 which I can see in the Cube and the key figure values are all zero...But when I e

  • Java Transport of Copies

    Hello Experts, Is it possible to send Transport of Copies for Java transports since they technically don't have their changes assigned to the tasks below the transport but instead at the transport level? How can you send Transport of Copies for Java

  • Audobe Audition 2.0

    I have Adobe Audition 2.0 on discs.  I recently purchased a new laptop and it does not have a disc drive.  Is there anyway to download 2.0 ; I have the serial number for the discs? Thanks