Report for inactive vendors from past 2 years
Hi,
We have a request to create a report for the vendors who are not active for last 2 years. Can anyone please advise me the points I should keep in mind to consider a particular vendor inactive. eg. if a vendor has 0 balance in table LFC1 for last 2 years, will be considered as inactive but, that vendor could have some PO's activity on it in these 2 years, which are not appearing on FI side.
Please also tell me if there is a table to find open and close POs for vendors for last 2 years.
If anyone please advise, the points to keep in mind and important tables to refer for create this report.
Quick response will be appreciated.
Thanks & Regards
Hi,
Thanks for your prompt reply, Can you please tell me where is the parameter SALDO0 in report RFKSLD00.
Quick response will be appreciated.
Thanks & Regards
Similar Messages
-
I Need Interactive Report for displaying vendor information. Based on the s
Interactive Report for displaying vendor information. Based on the selection made by the corresponding Vendor Bank Details are listed such that the line selected in the basic list was visible along with the secondary list.
hi
Hi
Use the Table LFA1 and LFB1 in the basic list
and LFBK table details in the secondary list
see the sample code related to customer Sales orders
modify it with the Vendor tables
REPORT ZTEJ_INTAB1 LINE-SIZE 103 LINE-COUNT 35(5) NO STANDARD PAGE
HEADING.
*TABLES DECLARATION
TABLES : KNA1, VBAK, VBAP.
*SELECT OPTIONS
SELECT-OPTIONS: CUST_NO FOR KNA1-KUNNR.
*INITIALIZATION
INITIALIZATION.
CUST_NO-LOW = '01'.
CUST_NO-HIGH = '5000'.
CUST_NO-SIGN = 'I'.
CUST_NO-OPTION = 'BT'.
APPEND CUST_NO.
*SELECTION SCREEN VALIDATION
AT SELECTION-SCREEN ON CUST_NO.
LOOP AT SCREEN.
IF CUST_NO-LOW < 1 OR CUST_NO-HIGH > 5000.
MESSAGE E001(ZTJ1).
ENDIF.
ENDLOOP.
*BASIC LIST SELECTION
START-OF-SELECTION.
SELECT KUNNR NAME1 ORT01 LAND1 INTO
(KNA1-KUNNR, KNA1-NAME1,KNA1-ORT01,KNA1-LAND1)
FROM KNA1
WHERE KUNNR IN CUST_NO.
WRITE:/1 SY-VLINE,
KNA1-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
KNA1-NAME1 UNDER 'NAME',
61 SY-VLINE,
KNA1-ORT01 UNDER 'CITY',
86 SY-VLINE,
KNA1-LAND1 UNDER 'COUNTRY',
103 SY-VLINE.
HIDE: KNA1-KUNNR.
ENDSELECT.
ULINE.
*SECONDARY LIST ACCESS
AT user-command.
IF SY-UCOMM = 'IONE'.
PERFORM SALES_ORD.
ENDIF.
IF SY-UCOMM = 'ITWO'.
PERFORM ITEM_DET.
ENDIF.
*TOP OF PAGE
TOP-OF-PAGE.
FORMAT COLOR 1.
WRITE : 'CUSTOMER DETAILS'.
FORMAT COLOR 1 OFF.
ULINE.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'NAME',
61 SY-VLINE,
63 'CITY',
86 SY-VLINE,
88 'COUNTRY',
103 SY-VLINE.
ULINE.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR SECONDARY LISTS
TOP-OF-PAGE DURING LINE-SELECTION.
*TOP OF PAGE FOR 1ST SECONDARY LIST
IF SY-UCOMM = 'IONE'.
ULINE.
FORMAT COLOR 1.
WRITE : 'SALES ORDER DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'SALES ORDER NO.',
40 SY-VLINE,
42 'DATE',
60 SY-VLINE,
62 'CREATOR',
85 SY-VLINE,
87 'DOC DATE',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR 2ND SECONDARY LIST
IF SY-UCOMM = 'ITWO'.
ULINE.
FORMAT COLOR 1.
WRITE : 'ITEM DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'SALES ORDER NO.',
40 SY-VLINE,
42 'SALES ITEM NO.',
60 SY-VLINE,
62 'ORDER QUANTITY',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*END OF PAGE
END-OF-PAGE.
ULINE.
WRITE :'USER :',SY-UNAME,/,'DATE :', SY-DATUM, 85 'END OF PAGE:',
SY-PAGNO.
SKIP.
*& Form SALES_ORD
*& FIRST SECONDARY LIST FORM
FORM SALES_ORD .
SELECT KUNNR VBELN ERDAT ERNAM AUDAT INTO
(VBAK-KUNNR, VBAK-VBELN, VBAK-ERDAT, VBAK-ERNAM, VBAK-AUDAT)
FROM VBAK
WHERE KUNNR = KNA1-KUNNR.
WRITE:/1 SY-VLINE,
VBAK-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
VBAK-VBELN UNDER 'SALES ORDER NO.' HOTSPOT ON,
40 SY-VLINE,
VBAK-ERDAT UNDER 'DATE',
60 SY-VLINE,
VBAK-ERNAM UNDER 'CREATOR',
85 SY-VLINE,
VBAK-AUDAT UNDER 'DOC DATE',
103 SY-VLINE.
HIDE : VBAK-VBELN.
ENDSELECT.
ULINE.
ENDFORM. " SALES_ORD
*& Form ITEM_DET
*& SECOND SECONDARY LIST FORM
FORM ITEM_DET .
SELECT VBELN POSNR KWMENG INTO
(VBAP-VBELN, VBAP-POSNR, VBAP-KWMENG)
FROM VBAP
WHERE VBELN = VBAK-VBELN.
WRITE : /1 SY-VLINE,
VBAP-VBELN UNDER 'SALES ORDER NO.',
40 SY-VLINE,
VBAP-POSNR UNDER 'SALES ITEM NO.',
60 SY-VLINE,
VBAP-KWMENG UNDER 'ORDER QUANTITY',
103 SY-VLINE.
ENDSELECT.
ULINE.
ENDFORM. " ITEM_DET
REPORT demo_list_at_pf.
START-OF-SELECTION.
WRITE 'Basic List, Press PF5, PF6, PF7, or PF8'.
AT pf5.
PERFORM out.
AT pf6.
PERFORM out.
AT pf7.
PERFORM out.
AT pf8.
PERFORM out.
FORM out.
WRITE: 'Secondary List by PF-Key Selection',
/ 'SY-LSIND =', sy-lsind,
/ 'SY-UCOMM =', sy-ucomm.
ENDFORM.
After executing the program, the system displays the basic list. The user can press the function keys F5 , F6 , F7 , and F8 to create secondary lists. If, for example, the 14th key the user presses is F6 , the output on the displayed secondary list looks as follows:
Secondary List by PF-Key Selection
SY-LSIND = 14
SY-UCOMM = PF06
Example for AT USER-COMMAND.
REPORT demo_list_at_user_command NO STANDARD PAGE HEADING.
START-OF-SELECTION.
WRITE: 'Basic List',
/ 'SY-LSIND:', sy-lsind.
TOP-OF-PAGE.
WRITE 'Top-of-Page'.
ULINE.
TOP-OF-PAGE DURING LINE-SELECTION.
CASE sy-pfkey.
WHEN 'TEST'.
WRITE 'Self-defined GUI for Function Codes'.
ULINE.
ENDCASE.
AT LINE-SELECTION.
SET PF-STATUS 'TEST' EXCLUDING 'PICK'.
PERFORM out.
sy-lsind = sy-lsind - 1.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'FC1'.
PERFORM out.
WRITE / 'Button FUN 1 was pressed'.
WHEN 'FC2'.
PERFORM out.
WRITE / 'Button FUN 2 was pressed'.
WHEN 'FC3'.
PERFORM out.
WRITE / 'Button FUN 3 was pressed'.
WHEN 'FC4'.
PERFORM out.
WRITE / 'Button FUN 4 was pressed'.
WHEN 'FC5'.
PERFORM out.
WRITE / 'Button FUN 5 was pressed'.
ENDCASE.
sy-lsind = sy-lsind - 1.
FORM out.
WRITE: 'Secondary List',
/ 'SY-LSIND:', sy-lsind,
/ 'SY-PFKEY:', sy-pfkey.
ENDFORM.
<b>Vendor performance report</b>
See this sample code
*"Table declarations...................................................
TABLES:
EKKO, " Purchasing Document Header
CDHDR, " Change document header
SSCRFIELDS. " Fields on selection screens
*"Selection screen elements............................................
SELECT-OPTIONS:
S_EBELN FOR EKKO-EBELN, " Purchasing Document Number
S_LIFNR FOR EKKO-LIFNR, " Vendor's account number
S_EKGRP FOR EKKO-EKGRP, " Purchasing group
S_BEDAT FOR EKKO-BEDAT, " Purchasing Document Date
S_UDATE FOR CDHDR-UDATE. " Creation date of the change
" document
*" Data declarations...................................................
Field String to hold Purchase Document Number *
DATA:
BEGIN OF FS_EBELN,
EBELN(90) TYPE C, " Purchase Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created
" the Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
END OF FS_EBELN,
Field String to hold Purchase Document Header *
BEGIN OF FS_EKKO,
EBELN TYPE EKKO-EBELN, " Purchasing Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created the
" Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
END OF FS_EKKO,
Field String to hold Account Number and name of the Vendor *
BEGIN OF FS_LFA1,
LIFNR TYPE LFA1-LIFNR, " Account Number of Vendor
NAME1 TYPE LFA1-NAME1, " Name1
END OF FS_LFA1,
Field String to hold Change date and the name of the user *
BEGIN OF FS_CDHDR,
OBJECTCLAS TYPE CDHDR-OBJECTCLAS, " Object Class
OBJECTID TYPE CDHDR-OBJECTID, " Object value
CHANGENR TYPE CDHDR-CHANGENR, " Document change number
USERNAME TYPE CDHDR-USERNAME, " User name
UDATE TYPE CDHDR-UDATE, " Creation date of the change
" document
END OF FS_CDHDR,
Field String to hold Change document items *
BEGIN OF FS_CDPOS,
OBJECTCLAS TYPE CDPOS-OBJECTCLAS," Object class
OBJECTID(10) TYPE C, " Object Value
CHANGENR TYPE CDPOS-CHANGENR, " Document change number
TABNAME TYPE CDPOS-TABNAME, " Table Name
FNAME TYPE CDPOS-FNAME, " Field Name
VALUE_NEW TYPE CDPOS-VALUE_NEW, " New contents of changed field
VALUE_OLD TYPE CDPOS-VALUE_OLD, " Old contents of changed field
END OF FS_CDPOS,
Field String to hold Date Element Name *
BEGIN OF FS_DATAELE,
TABNAME TYPE DD03L-TABNAME, " Table Name
FIELDNAME TYPE DD03L-FIELDNAME, " Field Name
ROLLNAME TYPE DD03L-ROLLNAME, " Data element (semantic domain)
END OF FS_DATAELE,
Field String to hold Short Text of the Date Element *
BEGIN OF FS_TEXT,
ROLLNAME TYPE DD04T-ROLLNAME, " Data element (semantic domain)
DDTEXT TYPE DD04T-DDTEXT, " Short Text Describing R/3
" Repository Objects
END OF FS_TEXT,
Field String to hold data to be displayed on the ALV grid *
BEGIN OF FS_OUTTAB,
EBELN TYPE EKKO-EBELN, " Purchasing Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created the
" Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
WERKS TYPE LFA1-WERKS, " Plant
NAME1 TYPE LFA1-NAME1, " Name1
USERNAME TYPE CDHDR-USERNAME, " User name
UDATE TYPE CDHDR-UDATE, " Creation date of the change
" document
DDTEXT TYPE DD04T-DDTEXT, " Short Text Describing R/3
" Repository Objects
VALUE_NEW TYPE CDPOS-VALUE_NEW, " New contents of changed field
VALUE_OLD TYPE CDPOS-VALUE_OLD, " Old contents of changed field
END OF FS_OUTTAB,
Internal table to hold Purchase Document Number *
T_EBELN LIKE STANDARD TABLE
OF FS_EBELN,
Internal table to hold Purchase Document Header *
T_EKKO LIKE STANDARD TABLE
OF FS_EKKO,
Temp Internal table to hold Purchase Document Header *
T_EKKO_TEMP LIKE STANDARD TABLE
OF FS_EKKO,
Internal table to hold Account number and Name of the Vendor *
T_LFA1 LIKE STANDARD TABLE
OF FS_LFA1,
Internal Table to hold Change date and the name of the user *
T_CDHDR LIKE STANDARD TABLE
OF FS_CDHDR,
Internal Table to hold Change document items *
T_CDPOS LIKE STANDARD TABLE
OF FS_CDPOS,
Temp. Internal Table to hold Change document items *
T_CDPOS_TEMP LIKE STANDARD TABLE
OF FS_CDPOS,
Internal Table to hold Data Element Name *
T_DATAELE LIKE STANDARD TABLE
OF FS_DATAELE,
Temp. Internal Table to hold Data Element Name *
T_DATAELE_TEMP LIKE STANDARD TABLE
OF FS_DATAELE,
Internal Table to hold Short Text of the Date Element *
T_TEXT LIKE STANDARD TABLE
OF FS_TEXT,
Internal Table to hold data to be displayed on the ALV grid *
T_OUTTAB LIKE STANDARD TABLE
OF FS_OUTTAB.
C L A S S D E F I N I T I O N *
CLASS LCL_EVENT_HANDLER DEFINITION DEFERRED.
*" Data declarations...................................................
Work variables *
DATA:
W_EBELN TYPE EKKO-EBELN, " Purchasing Document Number
W_LIFNR TYPE EKKO-LIFNR, " Vendor's account number
W_EKGRP TYPE EKKO-EKGRP, " Purchasing group
W_VALUE TYPE EKKO-EBELN, " Reflected Value
W_SPACE VALUE ' ', " Space
W_FLAG TYPE I, " Flag Variable
W_VARIANT TYPE DISVARIANT, " Variant
*--- ALV Grid
W_GRID TYPE REF TO CL_GUI_ALV_GRID,
*--- Event Handler
W_EVENT_CLICK TYPE REF TO LCL_EVENT_HANDLER,
*--- Field catalog table
T_FIELDCAT TYPE LVC_T_FCAT.
AT SELECTION-SCREEN EVENT *
AT SELECTION-SCREEN ON S_EBELN.
Subroutine to validate Purchase Document Number.
PERFORM VALIDATE_PD_NUM.
AT SELECTION-SCREEN ON S_LIFNR.
Subroutine to validate Vendor Number.
PERFORM VALIDATE_VEN_NUM.
AT SELECTION-SCREEN ON S_EKGRP.
Subroutine to validate Purchase Group.
PERFORM VALIDATE_PUR_GRP.
START-OF-SELECTION EVENT *
START-OF-SELECTION.
Subroutine to select all Purchase orders.
PERFORM SELECT_PO.
CHECK W_FLAG EQ 0.
Subroutine to select Object values.
PERFORM SELECT_OBJ_ID.
CHECK W_FLAG EQ 0.
Subroutine to select Changed values.
PERFORM SELECT_CHANGED_VALUE.
CHECK W_FLAG EQ 0.
Subroutine to Select Purchase Orders.
PERFORM SELECT_PUR_DOC.
Subroutine to select Vendor Details.
PERFORM SELECT_VENDOR.
Subroutine to select Text for the Changed values.
PERFORM DESCRIPTION.
END-OF-SELECTION EVENT *
END-OF-SELECTION.
IF NOT T_EKKO IS INITIAL.
Subroutine to populate the Output Table.
PERFORM FILL_OUTTAB.
Subroutine to build Field Catalog.
PERFORM PREPARE_FIELD_CATALOG CHANGING T_FIELDCAT.
CALL SCREEN 100.
ENDIF. " IF NOT T_EKKO...
CLASS LCL_EVENT_HANDLER DEFINITION
Defining Class which handles events
CLASS LCL_EVENT_HANDLER DEFINITION .
PUBLIC SECTION .
METHODS:
HANDLE_HOTSPOT_CLICK
FOR EVENT HOTSPOT_CLICK OF CL_GUI_ALV_GRID
IMPORTING E_ROW_ID E_COLUMN_ID.
ENDCLASS. " LCL_EVENT_HANDLER DEFINITION
CLASS LCL_EVENT_HANDLER IMPLEMENTATION
Implementing the Class which can handle events
CLASS LCL_EVENT_HANDLER IMPLEMENTATION .
*---Handle Double Click
METHOD HANDLE_HOTSPOT_CLICK .
Subroutine to get the HotSpot Cell information.
PERFORM GET_CELL_INFO.
SET PARAMETER ID 'BES' FIELD W_VALUE.
CALL TRANSACTION 'ME23N'.
ENDMETHOD. " HANDLE_HOTSPOT_CLICK
ENDCLASS. " LCL_EVENT_HANDLER
*& Module STATUS_0100 OUTPUT
PBO Event
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'OOPS'.
SET TITLEBAR 'TIT'.
Subroutine to fill the Variant Structure
PERFORM FILL_VARIANT.
IF W_GRID IS INITIAL.
CREATE OBJECT W_GRID
EXPORTING
I_SHELLSTYLE = 0
I_LIFETIME =
I_PARENT = CL_GUI_CONTAINER=>SCREEN0
I_APPL_EVENTS =
I_PARENTDBG =
I_APPLOGPARENT =
I_GRAPHICSPARENT =
I_NAME =
I_FCAT_COMPLETE = SPACE
EXCEPTIONS
ERROR_CNTL_CREATE = 1
ERROR_CNTL_INIT = 2
ERROR_CNTL_LINK = 3
ERROR_DP_CREATE = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. " IF SY-SUBRC <> 0
CALL METHOD W_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT = W_VARIANT
I_SAVE = 'A'
I_DEFAULT = 'X'
IS_LAYOUT =
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
IR_SALV_ADAPTER =
CHANGING
IT_OUTTAB = T_OUTTAB
IT_FIELDCATALOG = T_FIELDCAT
IT_SORT =
IT_FILTER =
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
OTHERS = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. " IF SY-SUBRC <> 0.
ENDIF. " IF W_GRID IS INITIAL
CREATE OBJECT W_EVENT_CLICK.
SET HANDLER W_EVENT_CLICK->HANDLE_HOTSPOT_CLICK FOR W_GRID.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
PAI Event
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'EXIT'.
LEAVE PROGRAM.
WHEN 'CANCEL'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form PREPARE_FIELD_CATALOG
Subroutine to build the Field catalog
<--P_T_FIELDCAT Field Catalog Table
FORM PREPARE_FIELD_CATALOG CHANGING PT_FIELDCAT TYPE LVC_T_FCAT .
DATA LS_FCAT TYPE LVC_S_FCAT.
Purchasing group...
LS_FCAT-FIELDNAME = 'EKGRP'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Purchasing Document Number...
LS_FCAT-FIELDNAME = 'EBELN'.
LS_FCAT-REF_TABLE = 'EKKO' .
LS_FCAT-EMPHASIZE = 'C411'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-HOTSPOT = 'X'.
APPEND LS_FCAT TO PT_FIELDCAT .
CLEAR LS_FCAT .
Name of Person who Created the Object...
LS_FCAT-FIELDNAME = 'ERNAM'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-OUTPUTLEN = '15' .
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Purchasing Document Date...
LS_FCAT-FIELDNAME = 'BEDAT'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Vendor's account number...
LS_FCAT-FIELDNAME = 'LIFNR'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Account Number of Vendor or Creditor...
LS_FCAT-FIELDNAME = 'NAME1'.
LS_FCAT-REF_TABLE = 'LFA1'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Vendor Name'(001).
LS_FCAT-SELTEXT = 'Vendor Name'(001).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Creation date of the change document...
LS_FCAT-FIELDNAME = 'UDATE'.
LS_FCAT-REF_TABLE = 'CDHDR'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Change Date'(002).
LS_FCAT-SELTEXT = 'Change Date'(002).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
User name of the person responsible in change document...
LS_FCAT-FIELDNAME = 'USERNAME'.
LS_FCAT-REF_TABLE = 'CDHDR'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Modified by'(003).
LS_FCAT-SELTEXT = 'Modified by'(003).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Short Text Describing R/3 Repository Objects...
LS_FCAT-FIELDNAME = 'DDTEXT'.
LS_FCAT-REF_TABLE = 'DD04T'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '15'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Old contents of changed field...
LS_FCAT-FIELDNAME = 'VALUE_OLD'.
LS_FCAT-REF_TABLE = 'CDPOS'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '12'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
New contents of changed field...
LS_FCAT-FIELDNAME = 'VALUE_NEW'.
LS_FCAT-REF_TABLE = 'CDPOS'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '12'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
ENDFORM. " PREPARE_FIELD_CATALOG
*& Form SELECT_PO
Subroutine to select all the Purchase Orders
There are no interface parameters to be passed to this subroutine.
FORM SELECT_PO .
SELECT EBELN " Purchasing Document Number
ERNAM " Name of Person who Created
" the Object
LIFNR " Vendor's account number
EKGRP " Purchasing group
BEDAT " Purchasing Document Date
FROM EKKO
PACKAGE SIZE 10000
APPENDING TABLE T_EBELN
WHERE EBELN IN S_EBELN
AND BEDAT IN S_BEDAT.
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S401(M8).
ENDIF. " IF SY-SUBRC NE 0
ENDFORM. " SELECT_PO
*& Form SELECT_OBJ_ID
Subroutine to select Object ID
There are no interface parameters to be passed to this subroutine.
FORM SELECT_OBJ_ID .
IF NOT T_EBELN IS INITIAL.
SELECT OBJECTCLAS " Object Class
OBJECTID " Object value
CHANGENR " Document change number
USERNAME " User name
UDATE " Creation date
FROM CDHDR
INTO TABLE T_CDHDR
FOR ALL ENTRIES IN T_EBELN
WHERE OBJECTID EQ T_EBELN-EBELN
AND UDATE IN S_UDATE
AND TCODE IN ('ME21N','ME22N','ME23N').
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S833(M8) WITH 'Header Not Found'(031).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_EBELN IS INITIAL
ENDFORM. " SELECT_OBJ_ID
*& Form SELECT_CHANGED_VALUE
Subroutine to select Changed Values
There are no interface parameters to be passed to this subroutine.
FORM SELECT_CHANGED_VALUE .
IF NOT T_CDHDR IS INITIAL.
SELECT OBJECTCLAS " Object class
OBJECTID " Object value
CHANGENR " Document change number
TABNAME " Table Name
FNAME " Field Name
VALUE_NEW " New contents of changed field
VALUE_OLD " Old contents of changed field
FROM CDPOS
PACKAGE SIZE 10000
APPENDING TABLE T_CDPOS
FOR ALL ENTRIES IN T_CDHDR
WHERE OBJECTCLAS EQ T_CDHDR-OBJECTCLAS
AND OBJECTID EQ T_CDHDR-OBJECTID
AND CHANGENR EQ T_CDHDR-CHANGENR.
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S833(M8) WITH 'Item Not Found'(032).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_CDHDR IS INITIAL
T_CDPOS_TEMP[] = T_CDPOS[].
ENDFORM. " SELECT_CHANGED_VALUE
*& Form SELECT_PUR_DOC
Subroutine to select Purchase Order Details
There are no interface parameters to be passed to this subroutine.
FORM SELECT_PUR_DOC .
IF NOT T_CDPOS IS INITIAL.
SORT T_EBELN BY EBELN.
LOOP AT T_CDPOS INTO FS_CDPOS.
READ TABLE T_EBELN INTO FS_EBELN WITH KEY EBELN =
FS_CDPOS-OBJECTID BINARY SEARCH.
IF SY-SUBRC NE 0.
DELETE TABLE T_EBELN FROM FS_EBELN.
ENDIF. " IF SY-SUBRC NE 0.
ENDLOOP. " LOOP AT T_CDPOS...
LOOP AT T_EBELN INTO FS_EBELN.
MOVE FS_EBELN-EBELN TO FS_EKKO-EBELN.
MOVE FS_EBELN-ERNAM TO FS_EKKO-ERNAM.
MOVE FS_EBELN-LIFNR TO FS_EKKO-LIFNR.
MOVE FS_EBELN-EKGRP TO FS_EKKO-EKGRP.
MOVE FS_EBELN-BEDAT TO FS_EKKO-BEDAT.
APPEND FS_EKKO TO T_EKKO.
ENDLOOP. " LOOP AT T_EBELN...
T_EKKO_TEMP[] = T_EKKO[].
ENDIF. " IF NOT T_CDPOS IS INITIAL
ENDFORM. " SELECT_PUR_DOC
*& Form SELECT_VENDOR
Subroutine to select Vendor details
There are no interface parameters to be passed to this subroutine.
FORM SELECT_VENDOR .
IF NOT T_EKKO IS INITIAL.
SORT T_EKKO_TEMP BY LIFNR.
DELETE ADJACENT DUPLICATES FROM T_EKKO_TEMP COMPARING LIFNR.
SELECT LIFNR " Account Number of Vendor or
" Creditor
NAME1 " Name 1
FROM LFA1
INTO TABLE T_LFA1
FOR ALL ENTRIES IN T_EKKO_TEMP
WHERE LIFNR EQ T_EKKO_TEMP-LIFNR.
IF SY-SUBRC NE 0.
MESSAGE S002(M8) WITH 'Master Details'(033).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_EKKO IS INITIAL
ENDFORM. " SELECT_VENDOR
*& Form DESCRIPTION
Subroutine to get the description
There are no interface parameters to be passed to this subroutine.
FORM DESCRIPTION .
IF NOT T_CDPOS IS INITIAL.
SORT T_CDPOS_TEMP BY TABNAME FNAME.
DELETE ADJACENT DUPLICATES FROM T_CDPOS_TEMP COMPARING TABNAME FNAME
SELECT TABNAME " Table Name
FIELDNAME " Field Name
ROLLNAME " Data element
FROM DD03L
INTO TABLE T_DATAELE
FOR ALL ENTRIES IN T_CDPOS_TEMP
WHERE TABNAME EQ T_CDPOS_TEMP-TABNAME
AND FIELDNAME EQ T_CDPOS_TEMP-FNAME.
IF NOT T_DATAELE IS INITIAL.
T_DATAELE_TEMP[] = T_DATAELE[].
SORT T_DATAELE_TEMP BY ROLLNAME.
DELETE ADJACENT DUPLICATES FROM T_DATAELE_TEMP COMPARING ROLLNAME.
SELECT ROLLNAME " Data element
DDTEXT " Short Text Describing R/3
" Repository Objects
FROM DD04T
INTO TABLE T_TEXT
FOR ALL ENTRIES IN T_DATAELE_TEMP
WHERE ROLLNAME EQ T_DATAELE_TEMP-ROLLNAME
AND DDLANGUAGE EQ SY-LANGU.
IF SY-SUBRC NE 0.
EXIT.
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_DATAELE IS INITIAL.
ENDIF. " IF NOT T_CDPOS IS INITIAL.
ENDFORM. " DESCRIPTION
*& Form FILL_OUTTAB
Subroutine to populate the Outtab
There are no interface parameters to be passed to this subroutine.
FORM FILL_OUTTAB .
SORT T_CDHDR BY OBJECTCLAS OBJECTID CHANGENR.
SORT T_EKKO BY EBELN.
SORT T_LFA1 BY LIFNR.
SORT T_DATAELE BY TABNAME FIELDNAME.
SORT T_TEXT BY ROLLNAME.
LOOP AT T_CDPOS INTO FS_CDPOS.
READ TABLE T_CDHDR INTO FS_CDHDR WITH KEY
OBJECTCLAS = FS_CDPOS-OBJECTCLAS
OBJECTID = FS_CDPOS-OBJECTID
CHANGENR = FS_CDPOS-CHANGENR
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_CDHDR-USERNAME TO FS_OUTTAB-USERNAME.
MOVE FS_CDHDR-UDATE TO FS_OUTTAB-UDATE.
READ TABLE T_EKKO INTO FS_EKKO WITH KEY
EBELN = FS_CDHDR-OBJECTID
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_EKKO-EBELN TO FS_OUTTAB-EBELN.
MOVE FS_EKKO-ERNAM TO FS_OUTTAB-ERNAM.
MOVE FS_EKKO-LIFNR TO FS_OUTTAB-LIFNR.
MOVE FS_EKKO-EKGRP TO FS_OUTTAB-EKGRP.
MOVE FS_EKKO-BEDAT TO FS_OUTTAB-BEDAT.
READ TABLE T_LFA1 INTO FS_LFA1 WITH KEY
LIFNR = FS_EKKO-LIFNR
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_LFA1-NAME1 TO FS_OUTTAB-NAME1.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
MOVE FS_CDPOS-VALUE_NEW TO FS_OUTTAB-VALUE_NEW.
MOVE FS_CDPOS-VALUE_OLD TO FS_OUTTAB-VALUE_OLD.
READ TABLE T_DATAELE INTO FS_DATAELE WITH KEY
TABNAME = FS_CDPOS-TABNAME
FIELDNAME = FS_CDPOS-FNAME
BINARY SEARCH.
IF SY-SUBRC EQ 0.
READ TABLE T_TEXT INTO FS_TEXT WITH KEY
ROLLNAME = FS_DATAELE-ROLLNAME
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_TEXT-DDTEXT TO FS_OUTTAB-DDTEXT.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
APPEND FS_OUTTAB TO T_OUTTAB.
CLEAR FS_OUTTAB.
ENDLOOP.
ENDFORM. " FILL_OUTTAB
*& Form GET_CELL_INFO
Subroutine to get the Cell Information
--> W_VALUE Holds the value of Hotspot clicked
FORM GET_CELL_INFO .
CALL METHOD W_GRID->GET_CURRENT_CELL
IMPORTING
E_ROW =
E_VALUE = W_VALUE
E_COL =
ES_ROW_ID =
ES_COL_ID =
ES_ROW_NO =
ENDFORM. " GET_CELL_INFO
*& Form VALIDATE_PD_NUM
Subroutine to validate Purchase Document Number
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_PD_NUM .
IF NOT S_EBELN[] IS INITIAL.
SELECT EBELN " Purchase Document Number
FROM EKKO
INTO W_EBELN
UP TO 1 ROWS
WHERE EBELN IN S_EBELN.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E717(M8).
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_EBELN[]...
ENDFORM. " VALIDATE_PD_NUM
*& Form VALIDATE_VEN_NUM
Subroutine to validate Vendor Number
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_VEN_NUM .
IF NOT S_LIFNR[] IS INITIAL.
SELECT LIFNR " Vendor Number
FROM LFA1
INTO W_LIFNR
UP TO 1 ROWS
WHERE LIFNR IN S_LIFNR.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E002(M8) WITH W_SPACE.
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_LIFNR[]...
ENDFORM. " VALIDATE_VEN_NUM
*& Form VALIDATE_PUR_GRP
Subroutine to validate the Purchase Group
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_PUR_GRP .
IF NOT S_EKGRP[] IS INITIAL.
SELECT EKGRP " Purchase Group
FROM T024
INTO W_EKGRP
UP TO 1 ROWS
WHERE EKGRP IN S_EKGRP.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E622(M8) WITH W_SPACE.
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_EKFRP[]...
ENDFORM. " VALIDATE_PUR_GRP
*& Form FILL_VARIANT
Subroutine to fill the Variant Structure
There are no interface parameters to be passed to this subroutine
FORM FILL_VARIANT .
Filling the Variant structure
W_VARIANT-REPORT = SY-REPID.
W_VARIANT-USERNAME = SY-UNAME.
ENDFORM. " FILL_VARIANT
<b>Reward if usefull</b> -
Annual tax report for customer/vendor (Italy) - RFIDITCVL program
Hello,
we're using the Annual tax report for customer/vendor (Italy) in the ECC 6.0 version but we've the following problems:
- We only see a list of records in the List error section, where the field "Group" is not valued, so we don't know if the list is really an error list or not.
- We don't see anything in the results list
Do you know if there is some OSS Note we can apply or some customizing activity we have to do. Thank you.
MariaHi,
Use Report MIR5
MIR5 - Display List of Invoice Documents
You can use the report Display List of Invoice Documents (RMMR1MDI; transaction code MIR5) to display a list of the invoice documents.
In addition to the existing program Invoice Overview (transaction code MIR6), here you have extended selection criteria and display options:
o Gross invoice amount
o Unplanned delivery costs
o Currency key
o Exchange rate
o Entry date
o Entry time
o Choice between invoice and credit memo
o One-time customer with a one-time account
In the Invoice Overview program you can also change invoices, whereas in this report you only have display options.
By entering the following data you can increase your selection criteria:
o Entry type
o Invoice status
o Restrictions
Output: -
In the output list, the report displays the numbers of the posted and the parked invoice documents. The system does not display invoice documents that do not have a corresponding FI document, for example, invoice documents that are planned for verification in the background, or that have already been verified with errors.
From the output list, you can display the following:
o Invoice document
o FI document or list of FI documents
If more than one FI document is assigned to an invoice document, then you can display a list of all corresponding FI documents.
o List of all follow-on documents for an invoice document. -
Report for stock transfer from plant to plant
Hi,
Is there any standard report for stock transfer from plant to plant .
If not is there any enhancements to get the above report.
Regards,
Ravindranath.Hi Ravi,
U can use the tcode MB51 and their u can give the input as 301 if it is 1 step in the mvt type or use 303 and 305 for 2 step transfer. and generate the report.
if u want the list of stock transport orders then use tcode ME2N and the input parameter as item category "U" and generate the report.
hope it wud have answered ur question
Reward if useful
Shawn -
Withholding Tax Report for the Vendor
Hi Friends,
I want to use the report S_PL0_09000447 - Withholding Tax Report for the Vendor, in the selection paramaters the field "Country Variant" is mandatory but in this list i cannot find the relevent country code here.
Could any one please let me know where to maintain this?
Regards,Dear Sapref,
the documentation for that report says:
To use the report for additional countries, select an appropriate
variant as reference; hide the country-specific heading by selecting the
field Country not in heading and entering the required country in the
field Additional heading.
Please be kindly informed that You can use an existing country variant which may match the closest to
your requirement.
Aas far as I know there is no country validation between the company code's country and
the country variant.
Please be kindly informed that You can use the generic report: RFIDYYWT.
I hope this can help You.
Mauri -
Annual Tax Report for Customers/Vendors
Hello,
I am trying to use S_ALR_87012379 report but it does not exist in 6.0 release (it appears in 4.5 release)
Is there any other report to obtain "Annual Tax Report for Customers/Vendors"?
Thank you very muchHello,
I have tried S_ALR_87019598 and S_ALR_8709598 and they do not exist. -
Annual tax report for customer/vendors(RFIDITCVL
Hello,
I am running Annual tax report for customer/vendors and it appears no data in the list.
Then the system says:
"1 files created successfully"
Why is there no data in the list?
Thank you very muchHello,
I have tried S_ALR_87019598 and S_ALR_8709598 and they do not exist. -
BEx Report: How to get Inactive Customers from past 2 years
Hi Gurus,
Our requirement is to develop a BEx report to display inactive customers (Customers who does not have any sales from past 2 years)
We have a Multi-provider which has Invoice Cubes with all transaction data. the Multi provider does not contain Customer master info object, It Contains only Invoice cubes for Euro and North America.
Now we need to build a report on top of this Multi provider and achieve the inactive customer logic.
I request anyone who have worked on this kind of report, please help me with this.
Please note that we are using BI 7.
Thanks and Regards,
Rama.Thanks all for you replies,
Rahul, We have Customer infoobject in the invoice cube, but not the customer master data infoobject itself separately.
So we have to use the customer infoobject included as part of the invoice cubes.
there is a similar concept called Slow moving Material.. which can be achieved in a similar way..
There is an example in Sap help portal on this. Not sure how we can do that for Inactive customers..
Any more ideas welcome.
Thanks and appreciate all your efforts to contribute to this..
Regards,
Rama. -
SAP Report for Material purchased from Vendors
Can anyone tell me if there is a report in SAP that we can use to list all suppliers for a given material? We are operating in SAP ECC6.0 and need a report that will list all vendors that the company has used for a given part. Is there a standard report in SAP that pulls information from purchasing info records?
Also does anybody know of any SAP consultants that can help us create custom reports?
Edited by: TonyMart on Oct 20, 2011 2:46 PM
Edited by: TonyMart on Oct 20, 2011 2:47 PMHi,
There is not standard report for ageing... You have to develop a custom one if you are talking in terms of GR/IR...
Raghav -
0vendor - flag for inactive vendors
Hello Experts,
I have a requirement for a flag in 0VENDOR Infoobject to find the inactive vendors.
This falg should be set for those vendors who have no Purchase order/ Logistic Invoice created in the past 18 months.
Is it possible to get the desired result through 2LIS_02_ITM or 2LIS_02_INV? If yes then how this can be achieved through trasformation?
Thanks,
JaibirHi,
Ideally this does not constitute as master data, since you are checking vendors based on transactional data namely purchase orders.
What you can do is create a report with restricted key figure with restriction on cal month(document date) for the last 18 months. You will therefore get the vendors which are active for the last 18 months.
Another way that I can think of is to create a DSO, which holds the vendor no and date of invoice/po loaded from a datasource say 2lis_02_scl or 2lis_02_hdr(anything which gives you the document date and the vendor number).
When you activate the datasource request the active table will then hold the last date for an order for that vendor. Then load data from this active table to the infoobject. Create a field say no of months in the info object.. While loading to the infoobject , calculate the no. of months between the document date and the current date.
Please note that these are all ideas and I cannot guarantee that this will work.....would be nice if it did tho.
Hope this helps.
Regards. -
Balance Confirmation Report for multiple vendors
Hi all,
I have developed report in FI which gives details about opening balance,fiscal year, document number, posting date and amount in the output.In selection screen I am passing single values of fiscal year(GJAHR), vendor(LIFNR) and company code(BUKLRS). This report is working fine for single vendor but now I need to change it for multiple vendors. I tried but not getting desired result in the output.
Following is code for single vendor in selection screen.
SORT t_bsikbsak BY bukrs belnr gjahr buzei.
LOOP AT t_bsikbsak.
t_pre_bal-netpr = t_bsikbsak-dmbtr.
t_pre_bal-sgtxt = 'Opening Balance'.
IF t_bsikbsak-shkzg EQ 'H'.
t_pre_bal-netpr = t_pre_bal-netpr * -1.
ENDIF.
COLLECT t_pre_bal.
ENDLOOP.
LOOP AT t_pre_bal.
itab-netpr = t_pre_bal-netpr.
itab-sgtxt = t_pre_bal-sgtxt.
APPEND itab.
ENDLOOP.
SORT t_bseg BY bukrs belnr gjahr buzei.
CLEAR itab.
LOOP AT t_bseg.
ON CHANGE OF t_bseg-bukrs OR t_bseg-belnr OR t_bseg-gjahr.
READ TABLE t_bkpf WITH KEY bukrs = t_bseg-bukrs
belnr = t_bseg-belnr
gjahr = t_bseg-gjahr.
IF sy-subrc IS INITIAL.
itab-budat = t_bkpf-budat.
itab-belnr = t_bkpf-belnr.
itab-gjahr = t_bkpf-gjahr.
ENDIF.
ENDON.
IF t_bseg-koart = 'K' AND t_bseg-lifnr = s_lifnr.
itab-sgtxt = t_bseg-sgtxt.
READ TABLE t_bsak WITH KEY bukrs = t_bseg-bukrs
belnr = t_bseg-belnr
gjahr = t_bseg-gjahr.
IF t_bseg-shkzg EQ 'H'.
t_bseg-dmbtr = t_bseg-dmbtr * -1.
ENDIF.
itab-netpr = itab-netpr + t_bseg-dmbtr.
ELSEIF t_bseg-hkont = '0044100040'. " G/L for INTEREST EXPENSES
itab-inamt = t_bseg-dmbtr.
ELSEIF t_bseg-hkont = '0012300060'. " G/L for TDS ON INTEREST
itab-tdamt = t_bseg-dmbtr.
ENDIF.
AT END OF bukrs.
append_flag = 'X'.
ENDAT.
AT END OF belnr.
append_flag = 'X'.
ENDAT.
AT END OF gjahr.
append_flag = 'X'.
ENDAT.
IF append_flag = 'X'.
APPEND itab.
CLEAR itab.
CLEAR : append_flag.
ENDIF.
ENDLOOP.
Closing Balance
LOOP AT itab.
t_temp-netpr = itab-netpr.
t_temp-sgtxt = 'Closing Balance'.
COLLECT t_temp.
ENDLOOP.
CLEAR itab.
LOOP AT t_temp.
itab-netpr = t_temp-netpr.
itab-sgtxt = 'Closing Balance'.
APPEND itab.
ENDLOOP.
Kindly provide some input how to do it for multiple vendors in same code otherwise provide some suggestions for new code.
Thanks in Advance.waiting for response.
Thanks & Regards,
Harshada PatilHi,
Thanks for quick response.Following is the structure of internal tables which I am using in this program.
TYPES : BEGIN OF ty_bsikbsak ,
bukrs TYPE bsik-bukrs,
lifnr TYPE bsik-lifnr,
umsks TYPE bsik-umsks,
umskz TYPE bsik-umskz,
augdt TYPE bsik-augdt,
augbl TYPE bsik-augbl,
gjahr TYPE bsik-gjahr,
belnr TYPE bsik-belnr,
buzei TYPE bsik-buzei,
zuonr TYPE bsik-zuonr,
shkzg TYPE bsik-shkzg,
dmbtr TYPE bsik-dmbtr,
END OF ty_bsikbsak.
TYPES : BEGIN OF ty_bkpf ,
bukrs TYPE bkpf-bukrs,
belnr TYPE bkpf-belnr,
gjahr TYPE bkpf-gjahr,
bldat TYPE bkpf-bldat,
budat TYPE bkpf-budat,
stblg TYPE bkpf-stblg,
stjah TYPE bkpf-stjah,
END OF ty_bkpf.
TYPES : BEGIN OF ty_bseg ,
bukrs TYPE bseg-bukrs,
belnr TYPE bseg-belnr,
gjahr TYPE bseg-gjahr,
buzei TYPE bseg-buzei,
koart TYPE bseg-koart,
shkzg TYPE bseg-shkzg,
dmbtr TYPE bseg-dmbtr,
sgtxt TYPE bseg-sgtxt,
hkont TYPE bseg-hkont,
lifnr TYPE bseg-lifnr,
END OF ty_bseg.
DATA : t_bsik TYPE TABLE OF ty_bsikbsak WITH HEADER LINE.
DATA : t_bsak TYPE TABLE OF ty_bsikbsak WITH HEADER LINE.
DATA : t_bsikbsak TYPE TABLE OF ty_bsikbsak WITH HEADER LINE.
DATA : t_bkpf TYPE TABLE OF ty_bkpf WITH HEADER LINE.
DATA : t_bkpf2 TYPE TABLE OF ty_bkpf WITH HEADER LINE.
DATA : wa_bkpf TYPE ty_bkpf .
DATA : t_bseg TYPE TABLE OF ty_bseg WITH HEADER LINE.
DATA: BEGIN OF t_pre_bal OCCURS 0,
netpr TYPE bseg-dmbtr,
sgtxt TYPE bseg-sgtxt,
lifnr TYPE bseg-lifnr,
END OF t_pre_bal.
DATA: t_pre_bal1 LIKE t_pre_bal.
DATA: BEGIN OF t_temp OCCURS 0,
netpr TYPE bseg-dmbtr,
sgtxt TYPE bseg-sgtxt,
lifnr TYPE bseg-lifnr,
END OF t_temp.
DATA: BEGIN OF itab OCCURS 0,
gjahr LIKE bsik-gjahr,
belnr LIKE bsik-belnr,
budat LIKE bkpf-budat,
sgtxt LIKE bseg-sgtxt,
lifnr LIKE lfa1-lifnr,
netpr LIKE bseg-dmbtr, " Net Amount
inamt LIKE bseg-dmbtr, " Interest Amount
tdamt LIKE bseg-dmbtr, " TDS Amount
END OF itab.
RANGES: r_budat FOR bkpf-budat.
I have Included vendor(LIFNR) in all these structures.Now I am using three internal tables to hold opening balance, Closing balance and line item accounting documents from bseg table respectively.here, I need to collect all these three internal tables into one internal table according to vendor(LIFNR) with it's opening balance, accounting documents and closing balance. can anyone guide me through this so that I can collect all these three internal tables into single one.
Thanks & Regards,
Harshada Patil
Edited by: Harshada.up on Feb 15, 2011 9:33 AM -
Need BAPI or custom report for the Vendor partial clearing like in F-44
Hi exports,
My requirement is for creating a Z-Report for Vendor partial clearing like it happening in t-code F-44.
But I didn't find any BAPI or any report for doing partial vendor clearing inside my report.
Kindly suggest me any BAPI or some code such that I can able to clear those open items from my report.
Or suggest me any process such that i can achieve this.
Thanking you
PravasiniHi, Sagar:
Nice to see your thread here
No matter what kind of transactions you are using, finally, there will be a document posted in General Ledger Accounting, which is what you want. So to read the result, you can always try function module, like FI_DOCUMENT_READ.
Hope it will help.
Best Regards, Lawrence -
I've lost my contacts, texts and photos from past year! Help!
Tried to update my 3G today, but now I've lost all of my Pictures, Contacts an Texts from over the past year. Help!! Please! How do I recover any of this, pictures are most important
Thank you in advance!!You should have been importing all pics taken with the iphone regularly as you would any digital camera, most especially before any update.
If for some reason you have failed to do this, then they are likely gone. You can try restoring from backup.
You should have been syncing your contacts to your computer regularly.
If for some reason you have failed to do this, then they are likely gone. You can try restoring from backup. -
Automatic payment process for a vendor from different company code
Dear Friends,
We have a situation here to process automatic payment for a vendor which belongs to our subsidiary.
The scenario is explained below.
Our main company code A pays for a particular vendor (Eg. V1) from company code B.
When processing automatic payment for company code A, the vendor V1 from comapny code B need to be selected for payment and the DME file generated should include the payment for V1 aswell.
I know that we can set up a company code as paying company code for others but the situation here is only to process payment for one particular vendor (not all) from the other ccode.
I would appreciate your advise in this matter.
Regards,
AJ.Dear all,
Our situation is when we run the payment run for company code A it should also select the vendor V1 from company code B because the payment for vendor V1 has to be paid from the house bank of Ccde A. Cocde B is in different country and uses different house bank.
Is there any way to make the house bank of ccde A to pay for the vendor V1?
Regards,
AJ. -
Configuration for consolidated check for same vendor from different company
Hi All,
My company is trying to print a single check for same vendor with same vendor number in multiple company code.
The Automatic payment parameters has all company codes where the vendor is having open items.
But when payment run is carried out and the check is printed, there are more than 1 check printed for the same vendor corresponding to the cleared invoices.
One company is paying for all other companies and still multiple checks are printed.
Can someone help with some lead to resolve this issue.
Points will be assigned for helpful tips and answers.
Thanks alot in advanceHi,
i understood ur problem so dont worry.... solution is there in sap
while confiqure automatic payment program in FBZP give paying company code payment transaction give company code what check through you want to pay that ....ofter that payment will go through this company code check only
may be this information is useful to you
Maybe you are looking for
-
How to include text as HTML elements (see DOMElement)
I am working with Flash PRO CC v. 14.0. to convert my Flash website to HTML5 / javascript I have converted a file to the HTML5 Canvas I am very happy that the new Flash Pro has the feature to convert to HTML5 canvas HOWEVER: In my original .FLA file
-
Please hekp me reinstate my itunes library and playlists after my attempt to compress the windows music folder to save hard disk space. I have gone back to the music folder and unchecked the compression box and it looks like the music is reapperaing
-
Apple genius not helpful, maybe posters will answer my questions
I recently went to my local Apple Store to talk to a 'Genius' about my 80gb ipod classic that will not sync more than 200 songs before freezing. My 'Genius' asked if I had a Mac or PC at home and I said PC and without missing a beat he smugly suggest
-
Problems drawing images form another class
Ok as the title says I'm having trouble drawing images from a different class. I have a class that represents a plane and it has a draw' method that draws its .gif image. public void draw (Graphics g) g.drawImage(planepic , xPos, yPos, null) then in
-
Hi Experts, I am facing a wiered problem. I am getting the date from the data base and converting the date into string (format MM/DD/YYY). Here is the method I am using to convert date to String. public static String expandedDate(java.sql.Date p