Report for issuance of raw material

Hi!!!!
Kindly suggest me the t-code where i can look for the issuance of raw material against production orders on a month basis or quarterly basis.
Thanks

Hi,
COOIS:
maybe you should apply the settings written by me in my previous message since you can see the consumption of components in this report. Paste the movement type field in the layout and you will see 261.
MB51
you can paste the field ('Order') in the layout that contains the PrdOrd no.
MB53
Run the report > pusch 'consumption' button. That's all.
You should examine these reports and try to use them. You can get the information from COOIS ( components  and from MB51.
BR
Csaba
Edited by: Csaba Szommer on Jul 23, 2008 9:45 AM

Similar Messages

  • The standard report for BOMs of a material with a selected period?

    Hi Gurus
    Is there any  standard report for BOMs of a material with a selected period?

    Hi,
    You will have to develop a report for your requirement,
    The following tables will be used for the report
    MAST-WERKS
    STPO-MATNR
    MARA-MAKTX
    STPO-BMENG
    STPO-POSNR
    STPO-IDNRK
    STPO-MAKTX
    STPO-DATUV
    STPO-MENGE
    STKO-MEINS
    STPO-AVOAU
    Regards
    Merwyn

  • Batch Traceability for Sugar as raw material during the production process

    Dear Colleague ,
    I need your support for a traceability issue in a customer on beverage sector
    See the case below:
    Batch Traceability for Sugar as raw material during the production process
    In AMSB the batch traceability in some production processes is very difficult, especially in case of sugar where tanks wherein more than one batches of the same material can be mixed. For example, in a single day almost 17-20 batches of the same material can be mixed and as the result is a composition of water and sugar the normal FIFO rule strategy cannot be applied during the component consumption.
    The raw material (sugar) is received in tank S5 at different points of time, and its content is transferred to tank B1 for storage purposes as well as for mix the sugar with other material such as water.
    At a specific moment the S5 tank contains only a single batch, while the tank B1 contains more than one batch. Tank B1 is used in order to supply the production line and the corresponding material consumption is triggered in backflush as soon as the production activity is declared (production confirmation). Along with the material consumption the batch determination takes place and a complex algorithm is applied: at a very high level, the single batch is consumed depending on its percentage inside the mix of composition and in case the this
    percentage is under a threshold level the current batch should be full used in order to avoid that it will exist for ever.
    Moreover, the good movement reversal (reversal of material consumption) and its correction lead to a complete new calculation of all the batches consumed after the original movement date/time. This means that the algorithm for batch determination should be reapplied for all the consumptions subsequent to the original movement.
    On the other hand it’s not possible to identify the mix of batches at the exit point of silos B1 because the total consumption of the material in the tank will never happen. As long as the tank level decreases it will be filled up from the tank used for receiving of sugar (S5).
    As requirement AMSB needs to post the material consumption starting from EWM, this means that EWM should be the master system in this case and the correspondingmovements have to be  transferred to ECC afterwards. This mainly because EWM  should guarantee the business continuity in case the ERP system is not available.
    AMSB asked if the scenario depicted has been implemented in some customer, in EWM system or in any other SAP solution.

    Hi ,
    At the time of consumption you can put ' * ' aestrix sign in the batch field.
    You will get list of batches of that material.select ur batch and consume the quantity.
    Regards
    Piyush

  • Report for Purchases of a Material

    Dear MM gurus
    Is there any standard SAP report for the following criteria?
    1. Material code
    2. Qty purchased and uom
    3. Value
    4. Taxes
    5. Total Purchase value
    6. Material type
    7. Vendor
    8. Material Receipt doc. 
    Appreciate your quick answer.
    Thanks
    Ravi

    No all u mentioned fields are not covered in STd Report
    Std Report covers,
    1. Material code
    2. Qty purchased and uom
    3. Value
    4. Total Purchase value
    5. Vendor.
    you have to made Zreport for that.

  • Why can't I create a report for standard price by material

    Any ideas? All reporting I have tried in SQO1 and even in SE16 returns 0 value for standard prices?
    Firstly why is this? and secondly is there another way I can pull a report by material showing standard price?
    Points awarded, many thanks

    hi,
    In MM60, u can get report for  materials having standard & moving average price based on ur input in selection screen like material,plant,material type,material group & created by only. As of my knowledge,
    there is no option to get list of materials with standard price in std.SAP.
    There are two options to generate report for materials with standard price.
    1. It is better go for customization . selection screen must contains price control field. if u enter price control like 'S' or 'V' in intial screen , report is generated.
    2. create a ABAP query for this.
    I hope this info is helpful to u.

  • TCODE for MAP of Raw material

    Dear Gurus,
    What is the transaction code to know the MAP of Raw material for a particular date. Means current I can view in the material master. But say if I want to view the MAP as at back date then what is the TCODE.
    With Regards,
    Amit.

    Hi
    You can use T Code MC.9, where you can give the period wise selection for a combination of maerial and plant. Look at the editing parameters in the change layout options and refine your search.
    Thanks & Regards
    Sanil K Bhandari

  • Production Planning for industry getting raw material from farmers.

    I am working in a process industry where i get raw material from farmers.My production(quantity and quality) is compltely depend on the quality of raw material.How can I plan this in SAP, So that I can get  good quality of raw material.

    Hi
    SAP is ERP package which provides complete integration between all the other industry modules like Finance, Materials, sales, Production and Quality.
    The present system of your Production and Quality has to be mapped in the SAP. But the data has to be flown from the present systems to sap. We built some controls for Raw material inspection for quality, it will allow only raw materials which will meets your specifications. And at any point of time you will have better control on the production also. We can can easily which raw materils are used for production etc.
    Regards.
    Balu

  • Report for historic valuation of material-MBEW and MBEWH

    Hello,
    Our client needs a report that shows the value of stock of past period, the medium price during last exercises. Actually they have a Z report that show all this data, considering the data on MBEWH. The problem is that MBEWH only is updated if there is a price change (for example MR21) or a goods receipt. This table only will be changed when in the comiing month a material have any movement of stock.
    My question, if we catch the values LFGJA and LFMON OF MBEW table we consider the last change of price, and the key for entering to MBEWH table to get the past values.
    I have checked too, the MC.9 transaction. Looks like fine too, but if we can develop a program for accessing to the S039 table, this table is transparent table and we can not get any data. The data is providing from S032 table, and I have seen, that this table sometimes contains insconsistency values or negative values.
    Is there another transaction to get our client's requeriments???
    Thanks

    Hi Ravikumar,
    Hope you are an ABAPer. If not also, you can achieve this through an ABAPer. As mentioned by others, you need to check whether your requirement is met by the standard transaction MB5B. You need to check whether this transaction gives you the exact opening and closing balance for a material. If this gives what you want, then you need to make some small enhancement in the MB5B report program so that you will be getting the result of the opening and closing stock. In this enhancement you will use EXPORT to export the result to your program where you can IMPORT it. This procedure is explained in detail in a document created in SCN dated 30th November, 2012 by Sijin Siji. Have a look in that.
    That document is descriptive and it will be helping you in solving this issue. If you have any doubts, please revert back.
    Regards,
    Abijith

  • SAP report for movement type and material type

    Hi!
    I would like to use a standard SAP report to give me a list of all the movement types (much like MB51) but instead of material I would like to select on Material type e.g. ROH. The result should for example be a list of the movement types 501 on material type ROH.
    It is urgent, if you could help me I would be very greatful!
    Sincerely
    Anders Öhrling

    Thanks for your answer!
    I have managed to join the two tables and created a report that will work, except that the amounts in local currency that is given by movement type 201 is not negative (as in MB51). I need all movement types that generate a debit must be shown as a negative value. Wo when I summarize all the movement types I end up with the value of 101 minus 201.
    Is that possible without ABAP programming?
    Sincerely Anders Öhrling

  • Z report for opening qty of material date wise

    I have to develop a zreport which will calculate date wise opening  stock of material   and closing stock of that material at particular
    location ( not to use standard reports)
    I have to display sale qty and stock transfer qty  date wise.
    Similarly receipt qty  date wise.
    For sale qty, stock transfer qty and receipt calculation are date wise ok. But problem is to get date wise opening and closing stock of particular material.
    is it possible to get location wise material wise date wise opening stock list  in z report.
    Thanks

    Hi Ravikumar,
    Hope you are an ABAPer. If not also, you can achieve this through an ABAPer. As mentioned by others, you need to check whether your requirement is met by the standard transaction MB5B. You need to check whether this transaction gives you the exact opening and closing balance for a material. If this gives what you want, then you need to make some small enhancement in the MB5B report program so that you will be getting the result of the opening and closing stock. In this enhancement you will use EXPORT to export the result to your program where you can IMPORT it. This procedure is explained in detail in a document created in SCN dated 30th November, 2012 by Sijin Siji. Have a look in that.
    That document is descriptive and it will be helping you in solving this issue. If you have any doubts, please revert back.
    Regards,
    Abijith

  • Re: report for lead time of material

    Dear Gurus,
    I just want to know is there report to see the lead time of material. Kindly suggest me which is the t-code available
    Regards,
    Rajashekar

    Hi,
    You can see the lead time in Report- MCE7 (T Code) for material analysis, here yo will get lead time delivery time of material as per Material group, Vendor,purchase Org. If you want to get material number ,after results displayed choose from menu settings > characteristic display > key & description (or just key) , then
    choose from menu settings > column width and extend the length to e.g. 59 (18 material number + space + 40 description)An alternative way is building query  taking into consideration Table MARC. Thanking you.

  • REPORT FOR SOURCE LIST OF MATERIAL WITH VENDOR DESCRIPTION

    Dear All
    Let me know is any transaction where i will get the material source list similar as me03 transaction but
    with vendor name also .
    Regards,
    Rajendra Sawant.

    Hi Rajendar,
    I am sorry but the vendor name cannot be displayed in this or any other T-code.
    Or you can select the Vendor code for which you want to see the vendor name and clik on the Vendor tab above.
    Rwd if helpful.
    Regards,
    Robin.

  • App for tracking inventory, raw material, expenses, sales, etc.

    I'm on the verge of starting a simple business (if all goes well). I will be producing simple things like candles, eventually essential oils, etc, but may also sell things NOT produced from raw materials. I'm wondering if anyone has a recommendation for the best app for keeping inventory of raw materials & items produced by them, as well as keeping track of cost & sales of those things. Something simple, yet that's not lacking the essentials.
    Thanks.

    Hi Surya
    I guess you would be using Price Control V.. In that case, even a standard cost estimate wont help you
    If Price Control is V - Then you can take some cue from the appended thread... Product Costing-Overhead inclusion in Inventory standard cost without PPV
    refer the reply from Chetan especially.. You need to have the 4 cond types in MM Pricin procedure.. however, only one of them (base Price) would post offset to GR IR and not the other 3...
    You may think of using a routine as said by Althea
    As regards activating raw mat cost estimate - KKPAN - Functions > raw mat > Activate
    br, Ajay M
    Edited by: Ajay Maheshwari on Sep 23, 2011 7:18 PM

  • Introduction of Tolerrance for consumption of Raw material in a batch.

    Hi gurus,
    can i introduce tolerrance to the raw materials that are consumed in batches while production order comsumption.This is because, we feel that during Production Order consumption the one batch is not sufficient to confirm the Production Order and either a second batch is consumed or a stock correction is done.
    Thanks.
    naveen.

    Hi ,
    At the time of consumption you can put ' * ' aestrix sign in the batch field.
    You will get list of batches of that material.select ur batch and consume the quantity.
    Regards
    Piyush

  • Standard report for the cost of raw materail in production of finished good

    Is there any standard report for calculation of raw material cost from the production order of finished goods.?
    plz help in this issue.
    Thanks.

    closed

Maybe you are looking for