Report for materials which have not been cycle counted.

Hi,
Is there any report which can show me materials which have not been cycle counted and also materials which have been cycle counted with the cc date?
Sincerely,
Nicky

Hi,
   As of my knowledge, there is no standard report which can fulfill your requirement. You may go for development. Please check the similar thread: Cycle count analysis report
Regards,
AKPT

Similar Messages

  • How to find photos which have not been updated to the current Process Version?

    How can I search and/or filter to find photos which have not been updated to the current Process Version?  I would like to get a list of the photos rather than going through them one by one and looking for the lightening bolt.

    Thank you!  As my memory fades, it is good to know that my memory is backed up with you and others on this forum!

  • I have followed all the directions for downloading but have not been able to download Photoshop.

    I have followed all the directions for downloading but have not been able to complete the downloading.   Message was "Adobe Application Manager failed to install.

    You will have to provide system information for people to even be able to begin to give you advise.
    Mylenium

  • IOS 7 - why does my iphone 4S say I have purchased items which have not been transferred?

    I downloaded iOS 7 to iTunes (11.1) and synced my iPhone (4S), but when I try to update, I get an alert saying that I have puchased items on my iPhone which are not in my iTunes library and that I should transfer them before upgrading.   I have synced several times, but I still get this warning.  Why is this happening, and what should I do about it?

    I found the answer here. https://discussions.apple.com/message/23036528#23036528

  • Can you close Material Codes/Groups which have not been used for a while?

    Is it possible to close material codes/groups when they are no longer required? This would be similar to putting a date on Cost Centres in finance which then restrict the availability of use.

    before putting deletion flag please be sure the stock in those material is ZERO
    now rather than using MM06 use
    WSE1
    here you can block n put deletion flag for material
    and to remove deletion flag use
    WSE8

  • How to see the generic users in 11.5.10 which have not been enddated

    Hi all,
    Can anybody let me know how to see the generic users in 11.5.10 who are not enddated?
    Thanks.

    if I understand you correctly, you're looking for the all the out-of-the-box accounts.
    You could use something like this:
    select * from fnd_user
    where start_date = to_date( '01/01/1951','mm/dd/yyyy')
    or where creation_date = the apps install date
    Be warned that many of these accounts are used internally and shouldn't be end-dated.

  • For over 2 weeks now,i have not been able to use my itunes on my 2 laptops. it been giving me an error report of invalid signature.

    For over 2 weeks now,i have not been able to use my itunes on my 2 laptops. it been giving me an error report of invalid signature.

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Need to change my Apple ID to a gmail address in preparation for a move and I have not been able to determine how to change this ID in iCloud?  I had to revert to my old ID which will not be any good in a few weeks.

    Need to change my Apple ID to a gmail address in preparation for a move outside the US.  When I did this, it did not change in iCloud and I have not been able to determine how to change this ID in iCloud for either my Mac or iPad?  I had to revert to my old ID which will not be any good in a few weeks.  Does anyone know how to make the iCloud settings changes?

    Welcome to the Apple Community.
    Start here, change your country if necessary and go to manage your account.

  • Report for material  which not consumed during C015

    HI ALL,
    "I required a report for material which material are not
    consumed at C015 production confirmation time against actual consumation (order wise , part no wise & date wise )"
    its v urgent
    good suggesstion reward with valuable points.

    Amit,
    I think your problem is that you want to monitor when users are deleting the goods issue while confirmation. So you would have to know if for a confirmation qty of 100, the planned consumption should have been 100 but the actual consuption is 50.
    So you would want to relate the confirmation qty with the planned and actual consumption.
    In COOIS Remt, qty and Withdrawal qty will show the total reqmt and actual withdrwal. Hope this will not be helpful if I understand correctly.
    You have to create a simple query joining tables AFVV with RESB. Calculate the planned consuption for the confirmation qty. This along with the actual consuption will help to give what you are looking for.
    I am right ?
    Ram

  • List AD accounts that have not been used for months?

    Hello,
    I use oldcmp.exe to show me what computers have not been used for months and I can disable them, but I wish to do the same for users Active Directory accounts, is this possible?
    We use AD 2003
    Thanks

    sorry for slightly belated reply. I've used another version of this script that doesn't have the GUI interface on it, this will make it easier for you to run from a scheduled task.
    copy the code and make the relevant changes to the top section of the script as the comments explain. This will send and email with a link to the report generated.
    #Script designed to search AD for inactive user accounts, mark them as inactive and move them to a specific OU then disable them
    #Script can be run in the following formats
    # 1. Report only
    # 2. Report and move account
    # 3. Report, move and disable
    #Uses quest powershell tools which can be downloaded from http://www.quest.com/powershell/activeroles-server.aspx
    #Version 2.0
    #Added email functionality
    #Denis Cooper
    #Setup script Variables
    #Change the setting from True to false to alter the way the script runs (only one option can be true)
    $ReportOnly = "True" #Generates a CSV file showing all inactive user accounts
    $ReportandMove = "False" #Generates a CSV report, moves the users to a specific OU
    $ReportMoveDisable = "False" #Generates a CSV report, moves the users to specific OU, and sets the description
    #Set the period of inactivity in days
    $InactiveFor = "90"
    #Specify the OU to search for inactive users - us AD CN if searching enire AD
    $SourceOU = "OU=Users,DC=MyDomain,DC=Int"
    #Specify the destination OU to move inactive users to is using report and move or report move disable script options
    $DestinationOU = "OU=Inactive Users,DC=MyDomain,DC=Int"
    #Don't mark anyone with the the specified prefix in the description field to inactive - DND stands for Do Not Disable and is specified
    #in the users account description field for accounts which may not be used to login so will show as inactive but that you don't want to disable
    #must leave the * after the word for wildcard matching
    $DescriptionPrefix = "DND*"
    #Specify the description to set in the computer account on ReportMoveDisable option
    $Description = "Account disabled due to inactivity on $Today"
    #Specify the path to create the csv file (make sure the folder exists)
    $ReportFile = "\\server\share\InactiveUsersReport.csv"
    #Get todays date and store it in the $today variable
    $Today = Get-Date
    #Email Settings
    $SMTPServer = "smtp-server-name" #replace this with your internal smtp server
    $FromAddress = "[email protected]" #replace this with your from address
    $ToAddress = "[email protected]" #replace this with your TO address
    $CCAddress = "[email protected]" #replace this with your TO address
    $Subject = "This is your subject line" #replace this with the subject line for the email
    $MessageContent = "
    Hello,
    Please find a link to the latest report containing users that have been inactive for $inactivefor days
    $ReportFile
    Please take the appropriate action.
    Thanks you,
    IT
    #NO CHANGES BELOW THIS LINE
    Function SendEmail {
    $messageParameters = @{
    Subject = $subject
    Body = $messagecontent
    From = $fromaddress
    TO = $ToAddress
    CC = $CCAddress
    SmtpServer = $SMTPServer
    Send-MailMessage @messageParameters
    #Generates a report showing inactive users
    Function ReportOnly {
    $inactiveUsers | Export-Csv $ReportFile
    $count = $inactiveUsers.Count
    Write-Host -ForegroundColor White "$count inactive users were found and are being processed"
    SendEmail
    Invoke-Item $ReportFile
    #Generates report and moves accounts to desitnation OU
    Function ReportandMove {
    $inactiveUsers | Export-Csv $ReportFile
    $count = $inactiveUsers.Count
    Write-Host -ForegroundColor White "$count inactive users were found and are being processed"
    Invoke-Item $ReportFile
    $inactiveUsers | foreach {
    Move-QADObject $_ -NewParentContainer $DestinationOU
    #Generates report, moves accounts to destination OU, disables the account and sets the description
    Function ReportMoveDisable {
    $inactiveUsers | Export-Csv $ReportFile
    $count = $inactiveUsers.Count
    Write-Host -ForegroundColor White "$count inactive users were found and are being processed"
    Invoke-Item $ReportFile
    $inactiveUsers | foreach {
    Disable-QADUser $_
    Set-QADUser $_ -Description $Description
    Move-QADObject $_ -NewParentContainer $DestinationOU
    #Runs the script
    #Finds all inactive user accounts which are in an enabled state and store them in the variable $inactiveusers
    $inactiveUsers = Get-QADUser -SizeLimit 0 -SearchRoot $sourceOu -NotLoggedOnFor $InactiveFor -Enabled | Where-Object {$_.description -notlike $DescriptionPrefix}
    #Checks which script to run
    If (($ReportONly -eq "True") -and ($ReportandMove -eq "True" -or $ReportMoveDisable -eq "True")) {
    Write-Host -ForegroundColor RED "Only one run condition is allowed, please set only one run value to True and the others to false"
    Break
    If ($ReportONly -ne "True" -and $ReportandMove -ne "True" -and $ReportMoveDisable -ne "True") {
    Write-Host -ForegroundColor RED "No valid run condition was specified, please set only one run value to True and the others to false"
    Break
    If ($ReportONly -eq "True") {
    Write-Host -Foregroundcolor Green "Script running in report only mode."
    Write-Host -Foregroundcolor Green "Checking for accounts inactive for $inactivefor days in the OU $SourceOU"
    Write-Host -Foregroundcolor Green "The report will open automatically once complete, or you can find it here $ReportFile"
    ReportOnly
    If ($ReportandMove -eq "True") {
    Write-Host -Foregroundcolor Green "Script running in report and move mode."
    Write-Host -Foregroundcolor Green "Checking for accounts inactive for $inactivefor days in the OU $SourceOU"
    Write-Host -Foregroundcolor Green "The report will open automatically once complete, or you can find it here $ReportFile"
    Write-Host -ForegroundColor Green "Any inactive accounts will be moved to this OU $destinationOU"
    ReportAndMove
    If ($ReportMoveDisable -eq "True") {
    Write-Host -Foregroundcolor Green "Script running in report, move and disable mode."
    Write-Host -Foregroundcolor Green "Checking for accounts inactive for $inactivefor days in the OU $SourceOU"
    Write-Host -Foregroundcolor Green "The report will open automatically once complete, or you can find it here $ReportFile"
    Write-Host -ForegroundColor Green "Any inactive accounts will be moved to this OU $destinationOU and disabled and their description updated"
    ReportMoveDisable
    This link should help you create a scheduled task to run the script
    http://dmitrysotnikov.wordpress.com/2011/02/03/how-to-schedule-a-powershell-script/
    Regards,
    Denis Cooper
    MCITP EA - MCT
    Help keep the forums tidy, if this has helped please mark it as an answer
    My Blog
    LinkedIn:

  • BAPI for Finding Materials which have Classification Characteristics

    Hi,
    Does anyone know of an RFC or BAPI to return a list of materials which have a specific Classification Characteristic
    Most of the functions I've found will return the all the classification characteristics if you know the material number and the class.
    The other search tools and reports all seem to work with the SAP GUI and are quite interactive. I need to be able to execute an RFC or BAPI without SAP GUI.
    In my case, I know the Class Type and Class and I know the characterstic and attribute value but need a list of matching materials.
    Thanks
    Paul

    Hi Ashok
    Actually my requirement is that i want to post the Vendor expenses thro' Vendor Portal and for that Validation will not helps us.
    So thro' BAPI 's only we can post the expenses ...........
    I suppose that its clear for you now.
    Revert
    Regards
    Praveen

  • I have been charged several times for items I have not ordered or received...Paradise Cove App

    I have been charged several times for items I have not ordered or received...Paradise Cove App.
    On a few dates I have attempted to purchase items on Paradise cove...then been billed several times for items I never received.
    please remove these charges.
    Tony Starace

    Select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History on your computer.

  • HT4644 I'm experiencing a similar problem with an LG Flatron monitor which my MBP no longer recognizes  I've tried installing the updates listed above but have not been succesful. Everytime I get a message saying that this software is not supported on my

    I'm experiencing a similar problem with an LG Flatron monitor which my MBP no longer recognizes.  I've tried installing all the updates listed above but have not been succesful. Everytime I get a message saying that this software is not supported on my system. Can anyone tell me why I can't install the updates?

    Hello Philly,
    I believe that when you reset your ipod(command given from the computer, right?)  touch WHILE the ipod was updating, It cleared the system in the middle of writing files, thus corrupting(equivalent of cutting of in the middle of a sentence) the basic running system.
    I suggest you go to an apple store and ask for a technical diagonosis in person. they may offer to help if the problem is fixable. If your ipod is still under warrenty, i would guess it would be free/low cost.
    ~Remember, I am just giving an educated guess on limited information

  • HT203167 I ordered and paid for a movie without being on wifi or connected to my laptop.  I have not been able to down load the movie that I paid for so how do I get it down loaded?

    I have a couple of questions.  I down loaded a movie when I was not hooked up to wifi or connected to my laptop.  I was charged for the movie but I have not been able to down load it or find it anywhere in my account. 
    Question:
    1.  Where do I find this movie and how do I get it down loaded to my I Pad?
    When I signed in to ask this question I had to go through a lot of sign in problems and also create a user name that is completely different that any of the sing in information that I have used previously.   Which create a lot of questions:
    1.  Why did I have to create a user name that I never had to do before?
    2.  Will this change the sign in process in the future?
    I will appreciate the answers to these questions
    Thank you very much.

    yes it could well do if your bank thinks there is something going on that is not from you they will block it. I have had this problem before, I would of thought they would of phoned me but they don't do that.
    If I was you I would go to my bank make sure they are not doing anything like that. If they say it's all fine then i would phone up apple them self or go into my local apple store, as they should be able to look at what there servers are saying why it's not working.

  • MM-Report to see the materials which is not used from last 3 months

    Dear All,
    I want to find out the materials which are not used from last 3 months.Is there any report?
    Thanks
    Vishal

    Hi
    check MB5B
    give material and plant there
    select valuates stock radio button and NON-Hierarchical representation layout  on selection screen
    give last three month duration period on selection screen and execute report
    and see total  Goods receipt and total goods issue for material
    Regards
    kailas ugale

Maybe you are looking for