Report for open process orders
Dear SAP experts,
As the period of the process order from open to close is not short, will take 1 or 2 months in our business case, so we want to find a report which can get the information just like the output of KSPP(for planned orders) .
I tried to analysis the logic of program KSPP, and it seems the function modules based on the planned orders only.
Is there any way to get the similar report for open process orders?
Many Thanks,
Lisa Yao
Is there any clues?
Similar Messages
-
Standard report(for open PO order items) with estimated Delivery dates
hi friends
i would like to know if there is any standard report(for open PO order items) with estimated Delivery dates on it.
thanks
alahariME2M (by material)
ME2L (by vendor)
ME2N (by number)
Use selection parameter WE101 for open GR
and scope of list EINT (scheduling lines) -
New Report for Opens Sales order and P.O from Plant and S.Loc
Dear Gurus
We have repory requiement for Open sales order and P.O to deliver from particular plant and S.Loc.
If you have already developed this kiond of report help me inthis case.
Thanks
ramkiclosed
-
Error for open process order when BOM alternative is not found
Dear colleagues,
When I open process order. BOM alternative is selected according to the production version. But when BOM alternative is not found system gives only information message and I can open process order, I want to prevent open process order when there is no BOM alternative according to the production version. Because the Bom can be deleted after creation production version.
Thanks for your helping,Hi,
U need to use an enhancement at the creation of order to check the active status of the bom and restricting the order creation when BOM status is inactive.
see whether following enhancement is useful for your scenario:
PPCO0006 Enhancement & EXIT_SAPLCOZF_003
Please confirm.
Regards
Suri -
Dear all,
I need to create a open sales order report. Could you please tell me from which table i can get open sales order. Its standard report is VA05 and also I checked in table VBBE. but all record which i get from VA05 are not visible in VBBE table. It means VBBE doesnt carry all pending open records.
Please guide me from which table i can get it or what is the sriteria to get it?
Thankyou very much in advance
Punnet Sharmahi,
my logic goes like this:
Note: Open cursor is used since we are dealing with huge amnt of data:
* Select orders based on their Delivery status
SELECT vbeln
FROM vbuk INTO TABLE git_vbuk
WHERE lfstk = 'A' OR lfstk = 'B' .
* Filter selected orders
* Selection using open cursor
DATA: lwa_op_sal_ord1 TYPE gt_comtab.
IF sy-subrc = 0.
OPEN CURSOR c1 FOR
SELECT vbap~matnr
FROM vbap INNER JOIN vbak
ON vbap~vbeln EQ vbak~vbeln
FOR ALL entries IN git_vbuk
WHERE vbap~vbeln = git_vbuk-vbeln AND
vbak~vbtyp = 'C'.
DO.
CLEAR lwa_op_sal_ord1.
FETCH NEXT CURSOR c1 INTO CORRESPONDING FIELDS OF lwa_op_sal_ord1.
IF sy-subrc = 0.
APPEND lwa_op_sal_ord1 TO li_op_sal_ord1.
ELSE.
CLOSE CURSOR c1.
EXIT.
ENDIF.
ENDDO.
ENDIF.
here filter orders based on 'A' and 'B' from VBUK...
then frm header table VBAK get order for vbtyp ='C'.
now li_op_sal_ord1 will have open sales orders..
Moreover as per ur query y do u need the item data frm VBAP as u are only concerned abt VBELN.
If u need item u hv 2 run another select.
regards,
ags -
Hi..
my client want the report for all open sales orders in following manner :
CUSTOMER NAME ITEM 1 ITEM 2 ITEM 3 ITEM 4
Customer 1 23 45 54 76
Customer 2 10 20 30 50
Customer 3 40 10 30 10
TOTAL 73 75 114 136
please let me know the sql query which i can put in crystal report to creat this report
Regards
RakhihI rAK
HERE IS UR QUERY FOR OPENSALES ORDER I THINK THIS WILL SOLVE UR PROB
SELECT T0.[DocNum], T0.[DocDate], T2.[CardCode], T2.[CardName], T0.[DocTotal],
(T0.[GrosProfit]/(T0.[DocTotal]-T0.[GrosProfit])*100)'PROFIT%', T2.[CntctPrsn], T2.[Phone1], T3.[GroupName]
FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry
INNER JOIN OCRD T2 ON T0.CardCode = T2.CardCode
INNER JOIN OCRG T3 ON T2.GroupCode = T3.GroupCode
WHERE T0.[DocTotal]!= T0.[GrosProfit] and T0.[DocStatus] ='O'
GROUP BY T0.[DocNum], T0.[DocDate], T2.[CardCode], T2.[CardName], T0.[DocTotal],
T0.[GrosProfit], T2.[CntctPrsn], T2.[Phone1], T3.[GroupName]
REGARDS
JENNY -
Report for open purchase order quantity
Dear experts,
Is there any report for showing open purchase order quantity for which goods are not yet received?
Regards
babuHi
ref the blw link which will have the complete sap std reports
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erplo/sapStandardReports -
Report for Open Purchase Orders
how to develop a report which lists all open purchase orders for given period & plant ? plz idoint want coding .. but give me guidlines & suggestions to develop my own plz tell where could i nstart & end for this report help me sdn
Edited by: Alvaro Tejada Galindo on Jun 5, 2008 11:32 AMEither you can use ME2N with selection parameter WE101 & Scope of list BEST
or
Go to SE16
Use Table EKPO
Use Filed name ELIKZ
If you give X list of all the delivery completed items.
If you leave blank list of all Open PO items will display.
Report showing the open Purchase orders
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Jun 5, 2008 11:32 AM -
Need Standared report for Open Sales order for all customers
VA05 is not useful as it gives this list for individual customers.
We need to see a list of all open orders for asll customers in one report only.
Thanx in advance.Hello,
did you try with transaction SDO1 - Orders Within Time Period? If it doesn't fit your requirements I suggest you to create a query.
Best regards,
Andrea -
Report for Open purchase orders that contain deleted preqs
Hi All,
Is there a way to list purchase orders that may contain purchase reqs that have been deleted after PO creation?
Cheers,
HarryHi,
The PRs are being deleted by other persons, mainly the originator, and by closing off work orders that the PR would be associated with.
The POs are still active, although quite old. I am hastening all PO that are active against the vendors to ensure supply of the goods.
I am seeing quite a large number of POs with deleted/closed PRs. Thus indicating there is no longer a demand for the items on the po.
If i could run a weekly report to show POs with deleted PRs. I could liaise with the originators to confirm their requirement before hastening against the vendor.
Cheers,
Harry -
Target Vs Acual Cost Comparison for multiple process orders
Dear SAPians,
I want to take a report for target vs actual cost for all process orders and product cost collectors created in a particular period. I have checked the standard report KKBC_ORD that serve my purpose but for a single order. I want the same report for multiple process orders and product cost collectors.
Is there any standard report or should I create a report painter report. I have tried to create a report painter report based on library 7KO, but target cost was not showing for selected order.
Kindly suggest.
ShiraziTarget Costs are available in library 601 for internal orders (and can be used for process/production orders).
Regards,
Adrian -
Report for open order and shipped qty summary
Dear Folks,
Can any one please help me.
Report for open order summary Vs shipped quantity
what are the related programs to it.
throw some light on it.>
arpita b wrote:
> Dear rohit
>
> Iam asking about any report which compares or give details of open order vs shipped qty.
>
> Any sis report is available for this?
Hi Arpita,
There is no such sis report available. You will have to configure and create two seperate reports and do the comparison.
If you want, I will send you the list of all T.codes used to generate reports in SD.
Revert back to me if you need the same.
Regards,
Swapna D. -
Data Migration for Open Purchase Order
Hi, All,
Is there anyone know how to Count the volume for Open Purchase Order. What's the normal strategy for the Data Migration and Cut-over stage?
My client want to know how many Open Purchase Order in the legacy system and then determine manual or automatic data migration. If manual, how to do? If automatic, how to do? Because all materials and vendors, plants are different number. How to track? How to find out to match between new and old?
Thank you very muchJC,
Sounds a bit early to be making decisions about the realization phase. It doesn't sound like you have finished the Blueprinting phase yet, much less the testing phase.
Anyhow, in my experience I typically use LSMW (Legacy system migration workbench) to load MM master data (material masters), Inventory (WIP, RM, FG, etc) Purchasing Master data (Vendors, Purchase Info Records, Source Lists, Quota Arrangements), and Purchasing transactional documents (POs, PurReqs, Scheduling Agreements, etc). Depending on the complexity and volume of data, it may be necessary to write custom programs to load the data. You will find this out during your requirements gathering.
It is uncommon but possible to load all of these data manually. I have never run across a client that wants to pay a consultant's hourly rate to sit at a terminal to peck away loading master data, so if the client intends to have his own users enter the data manually, the project manager should make provision that there will be qualified TRAINED client employees available for this data entry. I did help with a portion of a conversion once manually; of Sales Credits, but there were only about 30 SD docs to load. I did this the evening before go-live day, while I was waiting for some of my LSMW projects to complete in the background.
A good opportunity to 'practice' your data loads is right after you have completed your development and customization, and you have gotten the approval from the client to proceed from the pilot build to the full test environment. Once you have moved your workbench and customization into the client's test environment, but before integration testing, you can mass load all, or a substantial portion of your conversion data into the qual system. You can treat it like a dry run for go-live, and fine tune your processes, as well as your LSMW projects.
Yes, it is good practice to generate comparisons between legacy and SAP even if the client doesn't ask for it. For Purchase orders on the SAP side, you could use any of the standard SAP Purchasing reports, such as ME2W, ME2M, ME2C, ME2L, ME2N. If these reports do not meet the requirements of the client, you could write a query to display the loaded data, or have an ABAPer write a custom report.
You didn't ask, but you should also do comparisons of ALL loaded data - including master data.
It sounds like you are implying that the client wants YOU to extract the legacy data. For an SAP consultant, this is not very realistic (unless the legacy system is another SAP system). Most of us do not understand the workings of the myriad legacy systems. The client is usually expected to produce one or more legacy system technical experts for you to liase with. You normally negotiate with the technical expert about every facet of of the data migration. In addition, you will liase with business users, who will help you and the implementation team to logically validate that the final solution (turnkey SAP production system, fully loaded with data) will meet the client's business needs.
Finally, you mentioned how do you track the mapping of master data between legacy and SAP. There are many ways to do this. I normally try to get the legacy person do the conversion on his end, eg, when he gives you the load file, you would like to have already translated the master data and inserted the SAP relevant values into the file. If this is not possible, I usually use MS Access databases to maintain a master map, and I perform the mapping on a PC. If your data package is small, you can probably get by using MS Excel or similar.
Good Luck,
DB49 -
Self Updating Report of Open Sales Orders (Maybe Crystal )
I want a self updating report of Open Sales Order. I want it to refresh constantly. I know that it could be an alarm but it would be executed every # minutes and dont want to. Any ideas ? I dont know Crystal Reports enough but is it posible ?
Hi ,
If I were you , I will not be crazy looking at my sales order in every 1 minutes ..I would train my users to check at least 15 minutes.
I understand what u are trying to do;you want that customer will see the latest open SO created ..but 15 minutes is good enough time .
I think you have to check if database size grows up big time ..so far no report has come to me from my clients for this set up .
make sure you are not saving an alert into database
If you are using multiple alerts , I will atleast monitor my database for a while to see i encounter performance issue ..
So far for one alert at every 15 minutes ..i think u should be fine ..
Hope this helps
Bishal -
BOM Explosion for Multiple Process Orders
Hi,
I hope someone can assist me with the following: Is there a report I can run or transaction I can do to have BOM explosion for multiple Process Orders? I would like to input process orders for a week and see the BOM details per PO.
ThanksDear Sukendar,
1.For this requirement you have to go for a Z report and you can give the Functional Spec's to prepare
this report to your ABAP consultant.Prepare the input format,logic of the program and the output format.
In the logic part you can make use of this Functional Modules's CSAP_MAT_BOM_READ or
CSEP_MAT_BOM_READ or CS_BOM_EXPLOSION or CS_BOM_EXPL_MAT_V2 .
2.Using CEWB helps you to identify all the material that's having the BOM,but here the report does not
shows you the level by level by BOM for a FERT.
Check and revert back.
Regards
Mangalraj.S
Maybe you are looking for
-
How do I find the password for my iMac on version 10.7.4?
How do I find the password for my iMac on version 10.7.4?
-
I have develop a pie chart for Category Sales. If i click on one of the pie (Category) it should open a tabular report where it shows the sale of products in that category. How can i implement this in OBIEE dashboard?
-
Hello, I am aware that we use concept of Message Flows for communication between activities in two different pools. Now let me say i have 5 activities and Pool A and 5 in Pool B. Now message flow is generic in between pools. How do i define t
-
HT3371 Battery charge has drastically decreased in last month or so...
It's gone from holding a 6-7 hour full charge to a 2-3 full charge. Furthermore, it's jumping from estimated time range. One minute it can say I have 2+ hours, five minutes later, 1:30 minutes. This is with display at just level 6 brightness, and all
-
Flash 8 - How do i make a sound occur when the car hits the item
In the car game i am working on, I now got a point system set up so the car hits different items and the points rise but i want the sound clip i have downloaded to play when the car hits the items.. http://thebackyardchampion.deviantart.com/#/d48zgkl