Report for open purchase order quantity

Dear experts,
Is there any report for showing open purchase order quantity for which goods are not yet received?
Regards
babu

Hi
ref the blw link which will have the complete sap std reports
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erplo/sapStandardReports

Similar Messages

Report including open purchase order quantity for one storage location

Hello gurus,
I am looking for a report giving me the total/available stock and the open purchase order quantity for all materials stored in a certain storage location.
I.e. like this:
Plant 0001, storage loc. 01
Material stock open purchase order quantity
100000 200 pcs. 50pcs.
Is there such a report in SAP standard?
Thanks
Alicia

hI
U want the report like this ,
MAterial stock availablein storage location and with Open PO quantity for the same material.???
This report u can get in 2 different transaction . the n u can combine and create one custom transaction .
One is for materil stock in storage location is MB52 or MB5B
THen ME2N for open PO quantity for that material.

Report for Open Purchase Orders

how to develop a report which lists all open purchase orders for given period & plant ? plz idoint want coding .. but give me guidlines & suggestions to develop my own plz tell where could i nstart & end for this report help me sdn
Edited by: Alvaro Tejada Galindo on Jun 5, 2008 11:32 AM

Either you can use ME2N with selection parameter WE101 & Scope of list BEST
or
Go to SE16
Use Table EKPO
Use Filed name ELIKZ
If you give X list of all the delivery completed items.
If you leave blank list of all Open PO items will display.
Report showing the open Purchase orders
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Jun 5, 2008 11:32 AM

Report for Open purchase orders that contain deleted preqs

Hi All,
Is there a way to list purchase orders that may contain purchase reqs that have been deleted after PO creation?
Cheers,
Harry

Hi,
The PRs are being deleted by other persons, mainly the originator, and by closing off work orders that the PR would be associated with.
The POs are still active, although quite old. I am hastening all PO that are active against the vendors to ensure supply of the goods.
I am seeing quite a large number of POs with deleted/closed PRs. Thus indicating there is no longer a demand for the items on the po.
If i could run a weekly report to show POs with deleted PRs. I could liaise with the originators to confirm their requirement before hastening against the vendor.
Cheers,
Harry

Open Purchase Order Quantity

Hi, All,
Is there any way to know how many open purchase order quantity in the SAP system?
If I want to differentiate different business unit open purchase order, how I can do?
What's the T-code?
Thanks

Hi,
You can use ME2M, ME2N, ME2L, in the field Selection Parameters on the initial screen specify WE101 & the reports will list out all PO's for which GR is pending (i.e. Open PO's). Now you can change layout add / remove fields as per your need. You can also sub-total on plant or purchasing org. thereby getting the data you require. Also in the selection screen in the field Scope of List you can specify ALV to get an alv listing.
Hope the above answers your query.
Regards,
Vivek

Total open purchase order quantity fro a material

Hi,
Waht is the table that contain the total open purchase order quantity (on order quantity, not yet goods receipt) for a material number?

hi,
You can check the table EKPO, EKKO, and EKBE...
also for delivery schedules use the table EKET...
You also have a report ME2N for the same, use the proper selection parameter...
regards
Priyanka.P

Open Purchase Order quantity in SC PO

Hi,
Can anybody tell me open purchase order quantity in case of Subcontracting Purchase order.
what happen in case of subcontracting po with open quantity of po
Thanks and Regards
Anil Patil

Hi
Can you please more specific
1) Normally in subcontracting if ur PO is open then it means that still the assembly stock is with vendor
2) in some case if the vendor consumes more components/qty than the original BOM qty in the received
Finished Goods then you need to do subsequent adjustments
3) If u dont have any assembly components in hand for issuing the same to vendor then adjust the PO qty and close it
Regards
Amuthan M

Data Migration for Open Purchase Order

Hi, All,
Is there anyone know how to Count the volume for Open Purchase Order. What's the normal strategy for the Data Migration and Cut-over stage?
My client want to know how many Open Purchase Order in the legacy system and then determine manual or automatic data migration. If manual, how to do? If automatic, how to do? Because all materials and vendors, plants are different number. How to track? How to find out to match between new and old?
Thank you very much

JC,
Sounds a bit early to be making decisions about the realization phase. It doesn't sound like you have finished the Blueprinting phase yet, much less the testing phase.
Anyhow, in my experience I typically use LSMW (Legacy system migration workbench) to load MM master data (material masters), Inventory (WIP, RM, FG, etc) Purchasing Master data (Vendors, Purchase Info Records, Source Lists, Quota Arrangements), and Purchasing transactional documents (POs, PurReqs, Scheduling Agreements, etc). Depending on the complexity and volume of data, it may be necessary to write custom programs to load the data. You will find this out during your requirements gathering.
It is uncommon but possible to load all of these data manually. I have never run across a client that wants to pay a consultant's hourly rate to sit at a terminal to peck away loading master data, so if the client intends to have his own users enter the data manually, the project manager should make provision that there will be qualified TRAINED client employees available for this data entry. I did help with a portion of a conversion once manually; of Sales Credits, but there were only about 30 SD docs to load. I did this the evening before go-live day, while I was waiting for some of my LSMW projects to complete in the background.
A good opportunity to 'practice' your data loads is right after you have completed your development and customization, and you have gotten the approval from the client to proceed from the pilot build to the full test environment. Once you have moved your workbench and customization into the client's test environment, but before integration testing, you can mass load all, or a substantial portion of your conversion data into the qual system. You can treat it like a dry run for go-live, and fine tune your processes, as well as your LSMW projects.
Yes, it is good practice to generate comparisons between legacy and SAP even if the client doesn't ask for it. For Purchase orders on the SAP side, you could use any of the standard SAP Purchasing reports, such as ME2W, ME2M, ME2C, ME2L, ME2N. If these reports do not meet the requirements of the client, you could write a query to display the loaded data, or have an ABAPer write a custom report.
You didn't ask, but you should also do comparisons of ALL loaded data - including master data.
It sounds like you are implying that the client wants YOU to extract the legacy data. For an SAP consultant, this is not very realistic (unless the legacy system is another SAP system). Most of us do not understand the workings of the myriad legacy systems. The client is usually expected to produce one or more legacy system technical experts for you to liase with. You normally negotiate with the technical expert about every facet of of the data migration. In addition, you will liase with business users, who will help you and the implementation team to logically validate that the final solution (turnkey SAP production system, fully loaded with data) will meet the client's business needs.
Finally, you mentioned how do you track the mapping of master data between legacy and SAP. There are many ways to do this. I normally try to get the legacy person do the conversion on his end, eg, when he gives you the load file, you would like to have already translated the master data and inserted the SAP relevant values into the file. If this is not possible, I usually use MS Access databases to maintain a master map, and I perform the mapping on a PC. If your data package is small, you can probably get by using MS Excel or similar.
Good Luck,
DB49

Report for open process orders

Dear SAP experts,
As the period of the process order from open to close is not short, will take 1 or 2 months in our business case, so we want to find a report which can get the information just like the output of KSPP(for planned orders) .
I tried to analysis the logic of program KSPP, and it seems the function modules based on the planned orders only.
Is there any way to get the similar report for open process orders?
Many Thanks,
Lisa Yao

Is there any clues?

Standard report(for open PO order items) with estimated Delivery dates

hi friends
i would like to know if there is any standard report(for open PO order items) with estimated Delivery dates on it.
thanks
alahari

ME2M (by material)
ME2L (by vendor)
ME2N (by number)
Use selection parameter WE101 for open GR
and scope of list EINT (scheduling lines)

Report for released purchase order

Hai guru's
this is second time but i did't get any good replay please consider this, i want any standard report for released purchase order,means(i released two backdated po today next day i verify the report ME2n,those po are not display, the system take only document date not released date, now i am using CDHDR through this i got the report. but it is big process, so once check this and send your valuable solution.
Prasad

Hi Krishna,
You could use Me2N with the dynamic selection coupled with normal selection screen.
In Dynamic selection(3rd icon in screen).....you can select for which company code, release indicator as released....and save it as default variant.
hope this should solve your query
Sk.

Urgent - How to change Item category for Open Purchase Order

Hi Team,
Lil bit tricky issue.
My client has asked us to change the existing Item Category values, Combinations, Category Set etc. Its been changed and uploaded successfully.
The question here is how we need to handle the category for Open Purchase Order. How to update the same.
Do we need to do manually or any other way ?
Please advice
Regarads,
John

Hi John,
This is reallly a tricky issue!
I guess you cannot change the category of an existing PO's.
This field will be greyed out once we save the form...there were no profiles/other setups to enable this field.
For all new PO's since you have changed the new category value that should not be a issue.
Lets wait for some of our colleuges opinion.
I guess PO cancel should be the final option if we dont hear any new work arounds.
Thanks
-Arif.

Idea/Suggestion for Report on Open Purchase Orders

Note: coding is not necesary
give me an idea /suggestions how to develop a report which lists all open purchase orders not acknowledged for different vendors plz if u give me step by step procedure it will help me in developing
Title edited by: Alvaro Tejada Galindo on Jun 5, 2008 11:23 AM

Hi kumar,
   DEFINITION :A standing/open order is a Purchase order which has been issued to a vendor, against which specified purchases may be made for a specified period of time. When repeated purchases of the same type of supply items are expected, multiple purchase requisitions may be eliminated by submitting one purchase requisition to establish a standing/open order. This request must be accompanied by a justification memorandum. Standing purchase orders are issued for supply type items and services only.
JUSTIFICATION : Request for standing/open orders are approved by the Director of Purchasing, provided they are sufficiently justified. Purchases made by the standing/open order method are often more expensive, and should be considered carefully.
LOGIC: Open purchase orders meanse,the purchase order not realse due to some reasons.
     The purchase order table EKPO (or) EKKO.
        You find the both tables
         fields:          LOEKZ = Deletion Indicator.
                            ELIKZ = Delivery completion.
          You checks above fields NOTEQUAl to SPACE
            example:   LOEKZ   NE ' '
                            ELIKZ NE ' '
                 above fields equal to space that orders realsed.
example: select * from ekpo
                              into itab
                              where ebeln = pametervalue
                                 and loekz ne ' '
                                 and elikz ne ' '.
            Above statment excutes dipalys the open purchase orders.
       Thaks,
       sreddy.

Report with open Purchase orders and open Goods Receipt (without invoices)

Dear All,
We require a report in purchasing which will show:
1. open purchase orders
2. open goods receipts
We do not want POs and GRs that have been created into invoices to be included in the report.
At the moment we tried ME2N with RECHNUNG in selection parameters but it includes invoices. We have tried other selection parameters and reports but the results are not helpful.
I have also checked SDN but there is no correct answer. Most of them specify the ME2N with RECHNUNG as a solution but this does not work for us.
Any help would be appreciated.
G.

Hi,
Try ME2N, Select WE101....Also Select ALV
go to next screen....Go to change layout
Select to be deliverd(Qty) and Value, also to be invoice(Qty) & Value.
Hope Help U!
Regards,
Pardeep Malik

Interactive report for vendorwise purchase order details

Hi Experts,
I am trying to create vendor wise purchase order interactive report, if i click any of vendor detail it has to call display vendor screen for selected vendor or if i click any of purchase details it has to open purchase order details..
can any body explain...

hi arun,
use at line-selection
example,
at line-selection.
if sy-ucomm = 'PICK'.
if wa_lifnr is not initial.
    set parameter id 'LIF' field wa_lifnr.
    set parameter id 'BUK' field wa_bukrs.
    set parameter id 'EKO' field wa_ekorg.
    call transaction 'XK03'. endif.
if wa_ebeln is not initial.
    set parameter id 'BES' field wa_ebeln.
    call transaction 'ME23N' and skip first screen.
endif.
endif.
Regards,
Logan

Report for open purchase order quantity

Similar Messages

Maybe you are looking for