Report for Pending 103 for 105 (If GR based IV is untick condition)

Hi,
I required logic for mapping the report in Pending 103 for 105, If GR based IV is untick condition in PO.
Our business accept the material with movement type 103. After various tests (outside SAP), we post this document with movement type 105.
Normally each MIGO document has a reference document no . In case of 103 document, the reference docu no is the same no. In case of 105 document, the reference docu no is the docu no of 103.
It is noticed that for some 103 and 105 documents, the reference docu no is blank when GR based IV is not ticked in the Purchase order.
We need some logic to find the ref of 103 doc in 105 doc.
Regards,
Maddali

Thanks for your promt reply.
I have seen ME2M/ ME2L with selection parameter we104 or we105. However our client required specific report format for controlling this issue.
So I am trying for logic in this particular senarieo.
Regards,
Suresh

Similar Messages

  • Report for Pending GR for STO

    Dear All,
    can anybody reply me is there any standard report for Report for Pending GR for STO.
    if not how can i do with not developing new report ...i mean from exel or etc.
    Regards,
    Yashpal Supe

    Dear sir
    In MB5T stock in transit there you give your receiving plant . it will show the list
    Regards
    jrp

  • Report (T.CODE) for pending PO for release..VERY URENT

    Hi guru's
    First i wiil tell clearly abt my requirement, i wnt to get a report(list) of pending PO for release (i want to view the PO, but i dont want the option to release PO).In ME28 there is option to view pending PO for release and also for option to release.
    So i went to T.code ME2N, and i create a new scope of list in SPRO.
    For reporting , in SPRO i have made (pending for PO release(PPFR) in Scope of list).
    To get the exact report in Front end , any further SPRO activites is there to get a report.
    Goods solution will be highly rewardable..
    Please send me immediately.. urgent..
    Thanks
    sap-mm

    Hi
    Simple method for resolving your issue is,
    1.Goto Release PO Tcode:me29n
    2.Click Selection Variant under document overview on
    3.Click Purchase orders option
    4.Click Dynamic selection
    5.Click purchasing document header
    6.Select Subject to release option
    7.Choose yes "X" and press enter
    8.Enter company code under relevant field
    8.Create variant and save variant
    9.Execute the screen
    It will list all the pending PO's for approval.
    Reward point if it is useful.
    regards
    DVP

  • When request is submitted it goes for pending standby for long time

    Hi all,
    Does anyone have any idea about this?
    When im running oracle standard report on production its going to Pending Standby for long time and then it works normally whereas when i run the same report on clone server it directly runs without making any wait. Can anyone advice me what could be the issue related to this. Im unable to get to the root cause, so need your advice.
    Ours is 12.1.2 EBS - RAC (11.1.0.7) - HPux (11.31) env for production
    12.1.2 (EBS) -- Single node(11.1.0.7)-Hpux (11.31) env for Clone.
    thanks in advance.

    increase some processes in cuncurrent manager.
    Reagrds,

  • Open PO for pending Invoice

    what is the relavent table used to check for pending Invoice for a GR in Open PO report.

    Hi:
    You could achieve this using some link of tables from MM and accounting:
    1. MSEG
    2.BKPF
    3.BSET/BSEG
    Cheers
    Rahul

  • Report of Pending invoices

    Hi Friends
    Can you please tell me how to get a report of pending invoices for which GR s were done (also for partially done GR s).
    This should be based on Purchase Org, Purch. group, vendor wise.
    Standard reports MB5S and ME2N will not provide all the details.
    The report should include the following:
    Purch. Grooup
    Vendor     
    Vendor Name            
    Purch.Doc.   
    Item     
    Mat. Document Number       
    DC Number                  
    DC Date                     
    mat Doc. Qty.     
    OUn                     
    GR value     
    Quantit y invoiced       
    Invoice amount LC     
    Crcy
    Early reply is appreciated, as it is very urgent
    Regards
    Manthini

    Hi
    Yes. Standard reports will not give you inputs.
    It's not easy to link material documents with invoice either.
    If you are using GR based invoice verification, then fine.
    Did you check MR11 ? However, you have to be careful not to do any postings here.
    This will have PO, material document etc. But DC no--no;
    Copy this report, remove posting related code and add code to get DC no etc from MKPF for the given material document.
    Best regards
    Ramki

  • GRN Report for 103 and 105 movement

    Hi all
    IS there any report available in SAP
    Like i have done GRN with movement type 103 and 105
    So i want to know for a specific plant against specific movement type let us say
    my po is of 100 quantity
    i have done GRN for 20 qty mov type 103 and 20 qty with mov type 105
    GRN of 40 qty mov type 103 and 4 qty with mov type as 105
    grn 20 qty with mov type 103
    grn 20 qty with mov type as 103
    so i want a report material doc created for mov type 105 w.r.t 103 mov type material doc
    and only 103 material doc whose 105 is not done
    plz give me ur valuable input
    regds
    shailesh

    ya that is possible to get but not thorug standard MB51
    look do this way create a query in SQVI
    select tables MSEG and MKPF , EKBE now from this table select the field movement type as selection critera and posting date , plant etc.
    now select the field  MSEG,Movement type, PO no.
    i will give you the logic system should select the material document for movement type 105 then against this material document you can get the po now(that is already there in mb51 just change the layout) now from the purchase odere no selected you can get the material document for movement type 103 from table EKBE that is purcahse order history  . check with abaper by using this logic

  • Separate MIGO Series for 103 and 105 Movement

    Hi Experts,
    Please confirm SPRO Setting to separate MIGO Number Series for 103 and 105 Movement Type.
    Please cofirm, whether it is possible.
    Matter Urgent.
    Ishu

    Hi,
    Material Document is at Client Level, you cannot separate based on the  movment type.
    Regards
    Rewrad Points if useful

  • How to created a Report to calculate On-Hand inventory for pending sales

    hi,
        how to  created a Report to calculate On-Hand inventory for pending sales orders.for this report what are the tables and fields we have to use give me sample report.
    thank you
    radhakrishna.

    Hi!
    Tables:
    VBAK - sales order header data
    VBAP - sales order position data
    VBUK - sales order status header data
    VBUP - sales order status position data
    VBELN field is the key between the tables.
    Statuses in tables VBUK, VBUP: A-uncompleted, B-partially completed, C-fully completed
    Regards
    Tamá

  • Interactive Report for Pending Order

    Hi Gurus,
    Iam new to ABAP.
        I have Requirement to display the Interactive Report for Pending Order Status Report which displays pending of purchase orders for material wise and Vendor wise .Using ALV. Can Any one help ...me which table data i need to read and what are the field required.
      Thanks in advance.

    Hi G K,
    For pending order : VA05 (select open sales orders).
    cheers,
    Hema.

  • Report for Pending MIRO

    Hi,
    I am creating a Infoset Query for Pending MIRO report means PO + Vender whose GR has done but not MIRO.
    i use EKKO and EKBE.....
    Can any other table should me used.......Please suggest !
    REgards,
    Pardeep Malik

    Hi,
    1.Goto MB5S.Execute the report.
    2.Then select current display variant, a screen will be dispalyed in this select position.It will show the column cotent
    3.Select the input u require and transfer them to the left side byclicking the < .U fields will be transferred.
    4.Then click on copy
    5.Then go to settings at the top,then sElect layout then save.
    6.Give the layuot name & save, & come out of the screen.
    7.Now again goto MB5S ,in the bottom select ur lay out and execute u will get the report based on the layout created by use.
    Date range not possible.
    murugan

  • Report for pending approval absences

    Dear all Gents ,
    I want to create report for all types of employees absences which are pending approval and approved and every thing , any one has a select statement for this please ?
    thank you

    You have to query : per_absence_attendances table for applied leave
    and HR_API_TRANSACTION Table for pending approval leave.
    Thanks

  • Report for pending delivery

    Hi Experts,
    We have requirement,  SAP report for pending delivery - to help customer reconcile on what is pending for deliveries.
    I have used standard Tcode VL06 and VL06O but seeing all deliveries.
    Kindly let me know how to configure a report or t code so that  I should be able to see only pending delivery based on sales order.
    Regards,

    Hi DSP
    If I understood your requirement correctly, you are sending the sales orders to the dispatcher, based on those sales orders dispatcher has to create the deliveries only for those items which are going to be shipped today (i.e. GI to be posted today) so that he can optimized the transporation etc.
    For this requirement I think you can use VL04 transaction code and give input as shown in below screen shot. The inportant thing to note here is that, system selects only those line items from a sales order which has a GI date less than or equal to the date given in below screen.
    i.e. if your sales order has a 2 line items
    Line item 1 has GI date = 19.08.2014
    Line item 2 has GI date = 22.08.2014
    then as per below input  i.e. GI date = 22.08.014 system will create a delivery for both the line items
    If you give GI date = 19.08.2014 in below selection screen then system will create a delivery only for line item 1.  Please try and let me know

  • MM Report - Pending GRNs for which payment not made

    Hello Friends
    Is there any report availbale to view the pending GRNs for which payment has not been made.
    Best Regards
    Vijayakumar TVN
    Note: Subject line changed
    Edited by: Jeyakanthan A on Jun 16, 2011 2:32 PM

    Hi
    Is there any report availbale to view the pending
    GRNs for which payment has not been made
    there is no standard report in sap which link GRn and payement
    yes if you want to see po history ,then try t-code ME80FN but not sure it will work in 4.7 0r not
    or developm report
    see table EKBE to check po history for GRN and Invoice ,
    then pass this invoice number into BKPF into refernce field ( invocie number +fiscal year) and you will get Fi docuement for Header there for invoice
    after that pass docuement into table  BSAK where you will get vendor payement docuemnt.( clearnce docuemnt so you will come to know wheter payement made or not
    Regards
    Kailas Ugale
    Edited by: Jeyakanthan A on Jun 17, 2011 10:54 AM

  • Report for pending GRs

    Hello Experts,
    Can we have standard SAP report which will give me the list of pending GRs for which IR is done (IR is done first). I need this report at Plant level.
    Thanks!

    Please post this in MM forum
    G. Lakshmipathi

Maybe you are looking for

  • Keyboard not working correctly

    Hi there i have and intel iMac (one of the first) and I have a bluetooth apple keyboard. I have found that if I use the num-pad to the right the hole system locks up. I can only move my mouse (USB) but not click on any thing. I have plugged in my app

  • What is the Collation Used in ?sort:......?

    Hi, What is the default collation sequence of Publisher when doing sorting using the <?sort:...?> tag? My machines are configured "US English" as the locale, and my BI Publisher user (i.e. Administrator) is configured to run in "US English" as well.

  • Haw can i change a photo into a silvery look

    i have seen some fashion portrait even nude that looks like they are painted silver color, does any body know haw to do that? thank you so much,

  • Scaling / Resizing Catalyst Components in Builder

    Hi, I'm looking at setting up the proper workflow for a large project. We envision multiple developers and multiple designers on the project. The major sticking point now is scaling and resizing the components generated by Catalyst once they're in Bu

  • Spreadsheet can't be imported.

    Spreadsheet can't be imported. The document was created with an unsupported application version. I only keep 6 of my most used spreadsheets in iCloud at the moment.  Yesterday, out of the middle of nowhere I have received the message above when I try