Report for pending shipments, PGI and Picking

Hi All,
We have few issues with the orders not being picked, if picked some are not being able to PGI and few are not going to the Shipments process. this is creating a backlog. I was wondering if we have any Report or transaction where i can check open shipments for the last 2 weeks or, open PGI which have been picked, or deliveries which need to be picked.
Does sap has any standard report for this. Please help me.

Hi,
The mentioned reports (VL06F & VL06T) can be accessed from VL06O:
VL06F - general delivery list / List of outbound deliveries
VL06T - outbound deliveries for transportation planning
Csaba

Similar Messages

Interactive Report for Pending Order

Hi Gurus,
Iam new to ABAP.
I have Requirement to display the Interactive Report for Pending Order Status Report which displays pending of purchase orders for material wise and Vendor wise .Using ALV. Can Any one help ...me which table data i need to read and what are the field required.
Thanks in advance.

Hi G K,
For pending order : VA05 (select open sales orders).
cheers,
Hema.

Report for pending delivery

Hi Experts,
We have requirement, SAP report for pending delivery - to help customer reconcile on what is pending for deliveries.
I have used standard Tcode VL06 and VL06O but seeing all deliveries.
Kindly let me know how to configure a report or t code so that I should be able to see only pending delivery based on sales order.
Regards,

Hi DSP
If I understood your requirement correctly, you are sending the sales orders to the dispatcher, based on those sales orders dispatcher has to create the deliveries only for those items which are going to be shipped today (i.e. GI to be posted today) so that he can optimized the transporation etc.
For this requirement I think you can use VL04 transaction code and give input as shown in below screen shot. The inportant thing to note here is that, system selects only those line items from a sales order which has a GI date less than or equal to the date given in below screen.
i.e. if your sales order has a 2 line items
Line item 1 has GI date = 19.08.2014
Line item 2 has GI date = 22.08.2014
then as per below input i.e. GI date = 22.08.014 system will create a delivery for both the line items
If you give GI date = 19.08.2014 in below selection screen then system will create a delivery only for line item 1. Please try and let me know

Exit to set the automatic PGI and picking while creating outbound delivery

Hi experts,
Could anybody suggest how to set the automatic PGI and Picking while creating outbound delivery.
Currently we are settting VBUK-WBSTK field with value C. But PGI is not happening.
kindly help me.
Regards,
Ravi

Hello Parihar,
thanks for reply.
yes we know that "This process of picking and GI involves reducing the stock and allocating the goods to the delivery"
if you go for Custom program and Use FM WS_DELIVERY_UPDATE, we can do Picking and PGI.
our requirement is to do pickong and PGI while creating Delivery it self, based on this output types will be processed.

MB5B Report for Date Wise Stock and Value

Hi,
I am Taking MB5B Report for Date Wise Stock and Value.
But I have one doubt all stocks is coming or not in these report like Unrestrected Stock,Return Stock.Blocked stock,Transist stock,Restrected Stock,qty Inspection Stock.
I have another Doubt in these report three Stock type indicaters are there like these.
1.Storage Location / Batch Stock
2.valuated Stock
3.Special Stock.
But i have one doubt what is defferent these
1.Storage Location / Batch Stock
2.valuated Stock

Hi Prasad,
Yes MB5B report consider the Unrestricted, Quality, Blocked, Transit stock and restricted stock. Not sure about Return Stock.
If you select the Storage location/Batch stock radio button then the system will display all the possible stock from the storage location and the corresponding batch also.
If you select Valuated stock radio button then system will show only the valuated stock not the Non-valuated stock. Because Non-valuated material type is available in SAP system will not show those stock suppose if you select the Valuated stock radio button.
Regards
Karthick

Report for Pending GR for STO

Dear All,
can anybody reply me is there any standard report for Report for Pending GR for STO.
if not how can i do with not developing new report ...i mean from exel or etc.
Regards,
Yashpal Supe

Dear sir
In MB5T stock in transit there you give your receiving plant . it will show the list
Regards
jrp

Designing EDI Interfaces for Advance Shipment Notification and POD

Our client does not engage in manufacturing and distribution of its products and components. They have developed partnerships with companies who provide distribution, manufacturing, shipping and movement services. They have authorized Forwarding Agents to transport the shipment. However, our client monitors and controls the business operations and remains the final authority in decision making.
The distribution company does the actual delivery and sends our client shipment confirmation (EDI-856). A single IDOC (SHPCON) comes in and performs the following functions
   Update the delivery document (set picking value based on what shipped)
   Generate a shipment document (with Handling Unit Information)
    Post Goods Issue
We are facing performance issue with this kind of setup and the remedy suggested is to have multiple IDOC types to come in and create the shipment document and do the PGI separately.
I would like to hear experiences from practitioners on how they designed this requirement with other clients

Hi Prabhahar,
Try in this transaction NACE.
Select V2 for Shipping. And click output types.
Select LALE (Shipping Notification to Sold-to-party) or LAVA (Outgoing Shipping Notification) and use the Program RSNASTED for EDI processing and customize with the help of ABAPer.
Hope this helps.
Thanks
Augustine Ponraj

Report for Pending 103 for 105 (If GR based IV is untick condition)

Hi,
I required logic for mapping the report in Pending 103 for 105, If GR based IV is untick condition in PO.
Our business accept the material with movement type 103. After various tests (outside SAP), we post this document with movement type 105.
Normally each MIGO document has a reference document no . In case of 103 document, the reference docu no is the same no. In case of 105 document, the reference docu no is the docu no of 103.
It is noticed that for some 103 and 105 documents, the reference docu no is blank when GR based IV is not ticked in the Purchase order.
We need some logic to find the ref of 103 doc in 105 doc.
Regards,
Maddali

Thanks for your promt reply.
I have seen ME2M/ ME2L with selection parameter we104 or we105. However our client required specific report format for controlling this issue.
So I am trying for logic in this particular senarieo.
Regards,
Suresh

Report for Pending MIRO

Hi,
I am creating a Infoset Query for Pending MIRO report means PO + Vender whose GR has done but not MIRO.
i use EKKO and EKBE.....
Can any other table should me used.......Please suggest !
REgards,
Pardeep Malik

Hi,
1.Goto MB5S.Execute the report.
2.Then select current display variant, a screen will be dispalyed in this select position.It will show the column cotent
3.Select the input u require and transfer them to the left side byclicking the < .U fields will be transferred.
4.Then click on copy
5.Then go to settings at the top,then sElect layout then save.
6.Give the layuot name & save, & come out of the screen.
7.Now again goto MB5S ,in the bottom select ur lay out and execute u will get the report based on the layout created by use.
Date range not possible.
murugan

Report for pending approval absences

Dear all Gents ,
I want to create report for all types of employees absences which are pending approval and approved and every thing , any one has a select statement for this please ?
thank you

You have to query : per_absence_attendances table for applied leave
and HR_API_TRANSACTION Table for pending approval leave.
Thanks

Report for Material at subcontract AND PO number

We are preparing for Inventory verification at subcontractors.
My boss believes it would be easier for the SC vendor if we could supply the PO number for which the material was shipped.
I haven't found such a report. Is there one?
If you know the tables and links, I can write a ABAP query
Thank you for any help that can be provided.
Althea

Hi,
ME2O works fine if you want to track which subcontracting PO's are still open and what is the current stock at vendor.
ME2ON is another version of the same basic ME2O report.
Try also MBLB - Stocks at subcontractor.
As far as PO to 541 link is concerned, I do not think it is possible to find it unless there is some specific business process being followed which is supported by custom code.
The reason is that when you issue against 541, you are simply providing materials to vendor that the vendor needs.
There might be multiple open SC POs for same material/batch and there is no point in tracking against a particluar PO. Its the same material/batch the vendor receives.
When you post a PGR for a SC PO, then the stock from vendor premises is consumed by 543 and the track to your SC PO is maintained.
I tried maintaining EBELN as required in OMJJ for 541 but still no MSEG-EBELN is populated. Maybe I am missing something.

New Report for Opens Sales order and P.O from Plant and S.Loc

Dear Gurus
We have repory requiement for Open sales order and P.O to deliver from particular plant and S.Loc.
If you have already developed this kiond of report help me inthis case.
Thanks
ramki

closed

How to take a report for the assigned transaction and activity in a role

Hi Colleagues,
I want to take a report for the assigned transaction with activity for all roles, which are assigned to the users,
Transaction list for a role i can able to take it from SUIM but not able to take the ACTVT for the role.
Please suggest how to take this information.
BR,
Jai

Hi Jaikumar from the post :
I think you have reached the state of finding the USER to ROLE relationship
Take the output to an excel,
COPY just the roles column exactly in order do not rearrange , use AGR_1251 like other experts have mentioned
insert the roles copied from you buffer and execute, the output will have multiple entries for each role take the output to an EXCEL again , make it unique and match the outputs between both the EXCELS.
It will be a little tricky to do this, but I think you are proficient in MS EXCEL.
This is one of the ways to do , there are many other ways to do it.

Report for shedule vs supply and report for opening stock at back date.

Dear All Guru,
please can anybody reply me is there any standard report is available for
1) Report for shedule vs supply
2) and report for opening stock at back date.(ex- opening stock at last month 16th july or two months back on 10th may
pl suggest if any standard report is available or how we can data for this
Regards,
Vimlesh

Hi,
To see the opening stock at a particular date use T.Code: MB5B,
To see the scheduled quantity & delivered quantity use table EKET with the filed names MENGE & WEMNG.
Regards,
Prabu

P & L report for current period,YTD and previous YTD

I am trying to create a P & L report with the columns for current period,YTD and previous YTD, I have include the measures as the key of columns, which by using period or YTD we can retrieve the current period and YTD column, is there as easy way to get the previous YTD? although I can get it by using evtim to het every month and calculate the previous YTD.

resolved, just need to bring both time and measures in the columns

Report for pending shipments, PGI and Picking

Similar Messages

Maybe you are looking for