Report for personnel photo

Hi Gurus,
Can anyone let me know how do I extract a report where I can see the description of all the personsu2019 Personnel NO. who has photo attached by OAAD?.

Hi,
Pls chk this link;
Re: Employee Photo enclosing
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/erphcm/addEmployeePhotoonInfotype+0002&
Regards
CSM Reddy

Similar Messages

Standard reporting for personnel areas per org. unit

Hi all
An HR colleague asked me for a tool to display a selected organisational unit and then show what personnel area it belongs to. They are cleaning up our master data and need this kind of cross checking but I cannot come up with any list to show this.
How would you do it? Do I have to build a query for it or is there an easier way?
Regards
Jesper

Hi
Try this out
Step1.s_ph0_48000510 adhoc qurey or pqah
Step2.Go to org assignment folder
Step3.Select organizational unit for output
step4.Select personnel area for selection
Give input for Personnel area
and Execute Output
you get the results of orgunits belongs to given personnel area
all the best
partha
keep sharing andlearning

Report for employee photos / OAAD

How get PHOTOS which i have already uploaded with transaction OAAD into INFOTYPE 0002.
Our end-users need a SMARTFORM with employee data and photo of him/her.
I can not get this photos.
Best regards.

There is an ESS (Employee Self-Service) Web Dynpro component called HRESS_C_PER_PHOTO which probably has the logic to do this within. Personally, I developed my own CHiP to show this in a Side Panel.

Calling infotype 0002 in ALV report for showing employee photo

Hi all,
The requirment from business side is a report in which employees personal data shuold be shown with employee photo, I had tried for employee photo in ALV report but it didnt sucessed, then I went for other solution like calling transaction in ALV report.
In this case I am calling Infotype 0002 but the issue is that the transaction PA20 is coming with PERNR but I am not able to go directlly to infotype which shows employee Photo,please suggest any solution.
Thaks.
JAY

Hi Jay,
It is possible. Please refer the syntax for the CALL TRANSACTION
CALL TRANSACTION ta { [AND SKIP FIRST SCREEN]
                    | [USING bdc_tab [bdc_options]] }.
You can do a recording till the required page comes & call the transaction accordingly. Hope, you are aware about the same.
For example, I just had a solution to go to the roles tab in the user profile and I did as below:
    CLEAR wa_bdcdata.
    wa_bdcdata-program = 'SAPLSUU5'.
    wa_bdcdata-dynpro   = '0050'.
    wa_bdcdata-dynbegin = k_ok.
    APPEND wa_bdcdata TO it_bdcdata.
    CLEAR wa_bdcdata.
    wa_bdcdata-fnam = 'BDC_CURSOR'.
    wa_bdcdata-fval   = 'USR02-BNAME'.
    APPEND wa_bdcdata TO it_bdcdata.
    CLEAR wa_bdcdata.
    wa_bdcdata-fnam = 'USR02-BNAME'.
    wa_bdcdata-fval   = g_value.
    APPEND wa_bdcdata TO it_bdcdata.
    CLEAR wa_bdcdata.
    wa_bdcdata-fnam = 'BDC_OKCODE'.
    wa_bdcdata-fval   = 'SHOW'.
    APPEND wa_bdcdata TO it_bdcdata.
    CLEAR wa_bdcdata.
    wa_bdcdata-program = 'SAPLSUU5'.
    wa_bdcdata-dynpro   = '0100'.
    wa_bdcdata-dynbegin = k_ok.
    APPEND wa_bdcdata TO it_bdcdata.
    CLEAR wa_bdcdata.
    wa_bdcdata-fnam = 'BDC_OKCODE'.
    wa_bdcdata-fval   = '=ACTG'.
    APPEND wa_bdcdata TO it_bdcdata.
    g_opt-dismode = 'E'.
    g_opt-defsize = k_ok.
*** if user click on the User Name, call SU01
    CALL TRANSACTION 'SU01' USING it_bdcdata
                OPTIONS FROM g_opt.
Regards,
Selva K.

Report for monthly pay components for the employees

Hai Group
I want a report for all the employees monthly total wage and each individual components like basic, hra, medical, special allow etc, and also for deductions like pf, esi, pt, tax, etc.
Is standard report available or we need to go for a development for this?
Plz let me know incase the standard report available, where and is it possible to download to an excel file?
thank you

Hi Friend
In Wage type reporter screen, you can find a place called OTHER SECTIONS, next to that you can see the wage type column and down below you can find a place for object selection. Click on object section, you have find the personnel number in u2018Available objectsu201D move that to u2018Objects Selectedu2019 and try executing the report. Save this as a variant so that every time you donu2019t need to select the personnel number.
Hope this will solve your problem.
Regards
Santhosh.S

Report for bank transfers

HI Experts
I need a report for bank transfers as this Shape
Personnel number Name Bank Key Bank Account number Total amount
123 Haseeb HSBC 12334455555 16000
Please advice
Regards

Hai
Use the T.Code : s_ph0_48000510(Ad Hoc Query)
Double click on Infosets Name,
You will get selection field,Select the required field from "Bank details and basic pay "and go for output.
Whatever you asked,everything is available.
If your are having any problem in selection of fields ,let me know i will solve it.
Vincent

Report for time log on detail for each employees in SAP ABAP-HR report

hi experts,
      please help me .how to create a report for time log on detail for each employees in SAP ABAP-HR report.please help me.
                                                  thank you

Hi,
For Time Management Infotypes , If you want to read the data using macro you need to use the Macro called RP_READ_ALL_TIME_ITY
Example:
DATA: BEGDA LIKE P2001-BEGDA, ENDDA LIKE P2001-ENDDA.
   INFOTYPES: 0000, 0001, 0002, ...
                     2001 MODE N, 2002 MODE N, ...
     GET PERNR.
   BEGDA = '19900101'. ENDDA = '19900131'.
   RP_READ_ALL_TIME_ITY BEGDA ENDDA.
   IF PNP-SW-AUTH-SKIPPED-RECORD NE '0'.
      WRITE: / 'Authorization for time data missing'.
      WRITE: / 'for personnel number', PERNR-PERNR. REJECT.
   ENDIF.

HR Report for finding details for the new hires and leavers

Dear All,
I am very new to SAP HR ABAP.
Need Help
I have to create a report which fetches all the details <Details are mentioned below>
for all the
1)     New hires
2)     Leavers
in between a time range.
<Details to be fetched :~
Title
Fax
Mobile
Nationality
Domicile
Religion
Passport
Place of issue
Issue date
Valid till
Date of Hire
Action Reason
Reporting to
Date of exit interview
Leave Date
Leaving Reason
Street
Address Line2
City
District
Region
Country
Postal Code
Communication Number
Personal ID
Date Of Last Hire
Location
Job
Payroll area
OrgLvl1
OrgLvl2
OrgLvl3
OrgLvl4
Personnel Number
Date of seniority
EEBankName
Bank account no
Bank account type
PERID
Thanks a lot !!!
Joy
Edited by: joydip majumder on Jul 11, 2008 10:46 AM

Hi joy ,
you can create ur own z-report for this requirement , for this u have to read the employee data with in the date rage for   infotype 0 (Action) for hiring and leaving dates. Other related infomation u can fetch from the related infotypes tables like PA0001 etc using simple select queries.All required fields can be dispalyed in the ALV output.
Regards
Lakhan
Edited by: lakhan on Jul 11, 2008 2:35 PM

Problems setting duration for still photos and transitions in iMovie '11

I downloaded iMovie 11 from the Apps Store last night and am trying to make my first movie with it today. I use still photos exclusively.
For most - but not all - I like 5 seconds for photos and for transitions 2 seconds. I do vary this on occasion and so do not check "for all photos' or "for all transitions".
I can't get these settings to work with this version of iMovie. For example, I added a photo (5 sec) then a transition (2 sec) which changed the duration time of the photo - as it should. But when I double clicked the photo, to bring up the inspector window to change the duration of the photo, nothing happened. Then I added another photo. The duration of the first photo increased to 7 seconds and nothing I do seemed to change that.
The time increases seem random: for example, sometimes the time on the still photo increases to 6:29 sec, sometimes to 7 sec.
The duration for the transitions always remains the same - 2 sec; it's the time for the photos that jumps around. And I haven't been able to find a way to get back to 5 sec.
Before posting this, I researched and found an number of earlier posts detailing the same issues.
However, none of these posts had stars to indicate the problem was solved.
Has anyone found a solution or is this a bug that should be reported to Apple?

Interesting!!
I've spent a lot of hours on this too, but I have come up with a different solution perhaps because I like to vary both the image duration and the transition duration in my movies.
Here's my process:
-> Knowing that (a) I want most of the photos to be visible for 5 seconds and most transitions for 2 seconds and (b) that a transition takes half from the photo before and half from the photo after, under File>Project Properties>Photo Duration I chose 7 seconds - each photo will 'lose' a total of 2 seconds from the transitions in front and behind. I did not check either "Applies to all transitions." or "Applies to all photos." - See below for why.
-> I discovered, as you have, that all the photos have to go in before I add any transitions. This was new to me. With all previous versions of iMovie I simply added a photo then a transition then another photo one at a time. I had to fiddle with the timing adjustments, but at least I could fiddle. With this new version of iMovie I can't. Once the transition is in place, I cannot change the duration of the photo.
-> Sometimes, I want a longer or shorter duration for a photo. For example, on photos to which I apply the Ken Burns effect, I often want the image on the screen for a slightly longer time. In this case, I have to use the inspector to change the duration before I add the transitions. So I might set the time for 8 seconds; when both transitions are added, the time for this photo becomes 6 seconds, which is what I want.
-> The same applies if I want a transition to be shorter or longer than 2 seconds. If, for example, I want the duration for a transition to be 1 second, then I have to change the duration on the two linked photos to 5 1/2 seconds.
All of this requires much more prior planning than I am used to with iMovie. Right now, I working with batches of 5 or 6 photos at a time. I don't put a transition on the last photo in the batch until I have added the next group of photos. And things get really tricky if I don't like my original design. If I want to change anything, I have to take out all of the transitions linking the photos I want to work on, do the math, make the changes in the photo durations, then put the transitions back.
Perhaps I am trying to make iMovie do more than it was intended to do, I don't know. Perhaps this problem stems from the fact that I bought just iMovie 11 from the Mac Apps Store and not the entire iLife 11. Don't know that either. But at least I have found a way to make the movie look the way I want it to look.
Thanks for sharing your process. I will use it when the circumstances are right.

How can I search for duplicate photos in iPhoto libraries?

How can I search for duplicate photos in iPhoto 9.5.1 library. Installed on iMac 2.7 GHz Intel Core i5, Mavericks 10.9.5.

These applications will identify and help remove duplicate photos from an iPhoto Library:
iPhoto Library Manager - $29.95
Duplicate Annihilator - $7.95 - only app able to detect duplicate thumbnail files or faces files when an iPhoto 8 or earlier library has been imported into another.
PhotoSweeper - $9.95 - This app can search by comparing the image's bitmaps or histograms thus finding duplicates with different file names and dates.
DeCloner - $19.95 - can find duplicates in iPhoto Libraries or in folders on the HD.
DupliFinder - $7 - shows which events the photos are in.
iPhoto AppleScript to Remove Duplicates - Free
PhotoDedupo - $4.99 (App Store) - this app has a "similar" search feature which is like PhotoSweeper's bitmap comparison. It found all duplicates
Duplicate Cleaner for iPhoto - free - was able to recognize the duplicated HDR and normal files from an iPhone shooting in HDR
Some users have reported that PhotoSweeper did the best in finding all of the dups in their library: iphoto has duplicated many photos, how...: Apple Support Communities.
If you have an iPhone and have it set to keep the normal photo when shooting HDR photos the two image files that are created will be duplicates in a manner of speaking (same image) but there are only twp apps that detected the iPhone HDR and normal photos as being duplicates: PhotoSweeper and Duplicate Cleaner for iPhoto. None of the other apps detected those two files as being duplicates as they look for file name as well as other attributes and the two files from the iPhone have different file names.
iPLM, however, is the best all around iPhoto utility as it can do so much more than just find duplicates. IMO it's a must have tool if using iPhoto.

How to take report for Employee past pay results!!!

Hi Experts,
I would like to know how to generate report for employee's past pay roll, which gives information pertaining to employee's pay hike if any and other details.
Please advice...subbu14blueatgmail.com
Thank you in advance for your help.
Regards,
Subbu

Hi,
Pc00_M40_calc though you can do the live run then
go PC00_m99_CWTR here you can select the payroll period button
There you can give the payroll area and selection periods.
Then you can give the company code, and what ever you can personnel area wise and all.
Below that screen you need to select the Lay out variant.
Then you can execute that report.
Then you will get the wage types and the amount.
Any query's let me know.
Thanks and Regards,
Revathi.

Incorrect combinations for personnel area and personnel subare

Hi all,
we are getting incorrect combinations for personnel area and personnel subarea in the Target and as well in report.
we are using standard datasources 0PERS_AREA_TEXT and 0PERS_SAREA_TEXT, we are extracting only masterdata text from ECC, Not maintaining Attibute and Hierarchy for personnel area and personnel subarea.
we created (Actions overview) report on top of standard DSO 0PA_DS12 extracted from data source 0HR_PA_1,
Actually some of employees are changed on xxxx.xx.xx date from one personnel area to another personnel area with respective subarea's, but here employee personnel area are coming correctly but not for subarea.
what i need to do now?
can any one help out in this..
Thanks in advance.
Thanks,
Sri

Hi,
In this context we will have two senarios.
1. Displaying the Personal Area and Personal Sub Area from Transactional data.
2. Displaying from Master Data.
If you choose Scenario 1 then, Personal Area and Personal Sub Area will be shown as per ECC entry. But in second scenario, If one Personal area or Personal Sub Area changed over a period of time that will effect the historical data also.
For Example if your Personal Sub Area changed on Apr 1, 2011.
Scenario 1: Report will be as per ECC Data ( from Apr 1, 2011 onwards it will show new Personal Sub Area).
Scenario 2: Report will show new Personal Sub Area of Personal Area for entire data.
Hope this will help you.
Regards,
Chenna.

Upload Personnel Photos

Hi,
I will make the integration with the time attendance machines and I want to know what is the field name and what is the table storage the personnel photos on database.
I have followed the given steps below:
1. Create a number range for SAP Archive Link :
IMG>Basis Components>Basis Services>SAP Archive Link>Basic Settings>Maintain number ranges.
Tcode: OANR
Create range 01 from 0000000001 to 9999999999 without the external number flag.
2. Document type HRICOLFOTO must exist with document class JPG.
IMG>Basis Components>Basis Services>SAP Archive Link>System Settings>Maintain document types.
Table: TOAVE
Tcode: OAC2
3. Document type HRICOLFOTO must be linked to object type PREL and IT0002.
IMG>Personnel Management>Personnel Administration>Tools>Optical Archiving>Set up Optical Archiving in HR.
View: V_T585O,
In all three columns there are minuses, don't put a flag in the check box.
4. Check which content repository (Archive) is linked to document type HRICOLFOTO and object type PREL.
IMG>Basis Components>Basis Services>SAP Archive Link>Basic Settings>Maintain Links.
Table: TOAOM_C,
Tcode: OAC3
5. Create this content repository with storage type FILE archive.
IMG>Basis Components>Basis Services>SAP Archive Link>Basic Settings>Maintain content repositories.
Tcode: OAC0
Storage type FILE archive can be attained by clicking on the field Storage type and clicking somewhere else in the screen with the right mouse button. Choose Possible entries and only then you get a list of all values. FILE Archive is entry number 08. Choose Version no. 0031 and Archive path something.*
Now in 5th step ;
I have Create a new repository A2 ; In that
Content Rep. : A2 (A custom repository)
Description : Employee Photos
Document Area: ArchiveLink
Storage type: R/3 database
Rep. Sub-Type: Normal
Version no. : 0046 Content Server version 4.6
Contents table: SDOKCONT1
Phys. path : /usr/sap/(SYS-ID)/SYS/global/
My Issue is when I try to upload photo from OAAD I found the warning message:
HTTP error: 401 Unauthorized
Message no. CMS025
Diagnosis
Error in accessing via HTTP
401 Unauthorized
what should I do now??
Edited by: Mohamed Ayman on Oct 3, 2011 11:57 PM

Its is due to below
Transaction SICF, select: default_host - sap - bc - contentserver.Select the function to display/change the service.Make sure that a user is defined.
If no user is defined, then use transaction SU01 to create a new user.Use the "System" user type.Assign the SAP_ALL and SAP_NEW profiles to the user.

Standard hr reports for health plans

Hi Experts,
Can any one please tell me the standard hr reports for health plans for infotype 0167.
Thank you.
Regards,
Admir.
Points will be rewarded.

Follow this path from the main SAP menu:
Human resources -> Information System -> Reports -> Personnel management -> Benefits. Then you can select from reports under the topics of Participation, Cost and contributions, or Statistics. I hope this helps.
- April King

Standard reports for Global employment

Hi ,
Are there any standard reports for Global employment.
for eg. at Home country, I would like to know the Host country details like country code, personnel area etc.
Would they work with the authorizations available at the home country ie to display host country org. assignment.
Regds
SK

Hi SK,
Actually home country & host country asignemnt you can store in in IT710. Check it might help you.
Regards,
Purnima

Report for personnel photo

Similar Messages

Maybe you are looking for