Report for released orders from credit block

Dear Friends,
Can you tell me any report which can give us the list of released sales orders from credit block with user ID (who released) and date (when released). If no standard report is availble then please give me the table where this data gets stored, so that I can create a query.
Thanks in Advance,
Sreehari.

Dear Krishnan,
Thank you very much for your immediate response...................
With VBUK-CMGST (D) we can get the list of orders which were released from credit block, but I require the ID and Date (who released and when relaesed).
I hope my requirement is clear.
Thanks & Regards,
Sreehari.

Similar Messages

Sales order released from Credit block, but Purchase Requistion not created

Hi,
In third party sales scenario based on Scheduline Line category configuration purchase requistion creates when the order is created. If order is blocked for credit check then purchase requistion will not be created until order released from credit.
Here my scenario is
I have two users like A and B. When A releases the order from credit block by using transaction VKM1, Sales order releasing from credit and creating Purchase requistion. But, if the order is released by B, Sales order is getting released from credit but purchase requstion is not getting created.
There is no issue from security side, we activated trace and analysed everything it is not security issue.
Thanks and Regards
Alokam Chandra Sekhar

Hi Lakshmi,
Thanks for reply. I followed your instructions, pls find my observations below.
1. Can you check the below settings:
What is the Credit status in the header status tab page of the sales order for the B's sales order?
Is it "Not approved or releasedu201D If it is not approved, you might have released the sales order in VKM3, but you might not have saved it.
Reply: We are releasing order through VKM1 and after releasing the order the status is showing as "Released".
2. Did you use the same material for B's Sales order? If it a different material check the Item category and Schedule line category whether these are same with A's sales order.
Reply: Both the orders has same information, like material Item category and scheduline category
3. Check in the Schedule line tab page --> Procurement button whether you have maintain vendor, Source determination and Info record.
Source list has been verified through ME03 transaction and vendor data maintained correctly.
I really appreciate your time and efforts on this.. looking forward some more suggestions...
Thanks and Regards
Alokam Chandra Sekhar

VKM1-- Released from Credit Block...But unable to delivery

Hi,
We have credit check activated at sale order level. Due to credit limit, few of sales order blocked for delivery. As of now confirm qty is zero ony.
We have increased credit limit and released sales order from credit block through VKM1 and got successfull messages saying "Sales Order has been released".
But in Sales order, at Header level, its still showing credit block against delivery and unable to make delivery. ( Confirm qty is zero only). Here i am just checking whether block removed or not from VKM1.
Kindly explain and confirm the above process is correct or not.
Guide us the cycle how to release zero confrimed qty SOs.
Regards,
Venkat

Hi Venkat,
It is Right to use VKM1 because where ever i faced this issue a lot while doing PGI in the Outbound Delivery.
just go to VKM1 and give the customer number and Sales Organisation and Distribution channel and Press Execute Button.
The Specific Row of Data which displays your Sales Order Number and Outbound Delivery Number.
Check the Green Color Flag to release the Block on the Sales Order and then try your rest of processing.
Thanks & Regards,
S.Saravanan.
Sap SD - Team.
Edited by: Saravanan Sambandam on May 28, 2008 9:21 AM

Report for released purchase order

Hai guru's
this is second time but i did't get any good replay please consider this, i want any standard report for released purchase order,means(i released two backdated po today next day i verify the report ME2n,those po are not display, the system take only document date not released date, now i am using CDHDR through this i got the report. but it is big process, so once check this and send your valuable solution.
Prasad

Hi Krishna,
You could use Me2N with the dynamic selection coupled with normal selection screen.
In Dynamic selection(3rd icon in screen).....you can select for which company code, release indicator as released....and save it as default variant.
hope this should solve your query
Sk.

Duplicate production order due to sales order on credit block

Dear Experts !
Need feedback on the following scenario:
- Sales order is entered for material which is produced in-house specific to the sales order (ie customer's logo is on product).
- Schedule line in sales order creates a production order specific to the sales order.
- Customer runs into credit check a few days later and consequently the schedule line in the sales order is removed due to credit block, however the linked production order still remains and is produced by factory.
- Sales order is released from credit check and a new schedule line is created resulting in another production order being released.
Any ideas on how to prevent duplication of production order?
Thanks in advance!
-Alvin

Hello,
Apologies for the confusion, let me explain it a bit more.
- Sales order is entered for material with planning strategy group of make-to-order, the schedule line initiates new production order for make-to-order material.
- A few days later - the customer goes over credit limit or has overdue invoices, etc..
- During background rescheduling (or any sales order change) the sales order gets a credit block due to static check.
- Sales order block deleted schedule line in sales order, however the production order remains active.
- Once the sales order is released from credit block, a new schedule line is created which initiates a new production order.
- Duplicate production order is now being made in shop floor.
I hope the above explains my scnario a little clearer.
Thanks and regards,
Alvin

Order Confirmation - Generate IDoc even if the order is credit block - How?

Hi EDI Experts,
I have a simple requirement. I have no requirement set up in the output determination procedure for Order Confirmation. At this scenario, i am getting outbound 855 IDoc for all the orders except, the orders with Credit block on it.
The client wants to send out the order even if it is credit blocked. Is there a way that i can do this?? Any suggestions ??? Your views are most welcome.
Thanks and Waiting for youy replies,
Creasy Matt

Hi,
I'm not sure, whether it is apt to ur requirement.
We can remove the Credit block by configuring the 'Sales Order Types'.
from the Tcode: VOV8,
Select ur order type (OR), click on the details icon
there u can find the 'Delivery block' at the Shipping tab.
thanks\
Mahesh

How to list Sales Order with credit block

Hi, Gurus,
I really don't know how to list sales orders with credit block?
Is there any way for end user to do it?
If so, is it possible to list SO with credit block for certain period of time such as one month?
Any help would be appreciated.

HI
Check T-Code VKM2 (Released documents)
You need to check VKM1 (Blocked Documents)
Sorry before i gave wrong information , myself i corrected VKM2 for released not for blocked list (Due to non Availability of SAP access )
Regards,
Prasanna
Edited by: prasanna_sap on Feb 7, 2012 7:12 AM

Check if the Sales Order is credit block.

Hello Everyone,
I have a requirement related to third party sales order and delivery. In the first system, a sales is created and then the PO gets created. Upon the creation of the PO a IDOC gets generated. The inbound IDOC in the other system triggers and a sales order gets created. The requirement is that if sales order in the first system is on credit block then automatically the sales order in the second system should go on delivery block.
The solution that I have thought is that when the IDOC gets created after PO generation there itself add a flag to IDOC in case of credit block in sales order. BUT HOW TO CHECK CREDIT BLOCK of the SALES ORDER IN THE CUSTOMER EXIT?
Any help is appreciable.

Hi Rahul,
Need some more clarification on why sales order is created in the second system, if it is a third party process ?
are you creating delivery from the corresponding sales order of second system to replenish sales order of first system ?
are you using standard IDOC type for creating Sales order from PO ?, if so check the Corresponding Function module which may have user exists
check Function module : IDOC_OUTPUT_ORDRSP
At first system, if the sales order is credit block you can restrict creation of PR-->PO in the first system itself, this is a standard Functionality
This would be easier than looking for user and coding in IDOC function module
try and revert
thanks
santosh

How to create a daily report for sales order

hi
how to create a daily report for sales order. what fields it must consists of. what are the tables it need?

Hi
You have to use the sales order tables VBAK,VBAP and VBEP
So keep date field on selection screen
and treat this date as Order creation data audat field in VBAK.
based on this fetch the data from VBAK and VBAP with the following fields like
VBELN, KUNNR,NETWR,POSNR, MATNR,ARKTX,KWMENG,WAERS etc and display in the report
<b>Reward points for useful Answers</b>
Regards
Anji

Report for stock transfer from plant to plant

Hi,
Is there any standard report for stock transfer from plant to plant .
If not is there any enhancements to get the above report.
Regards,
Ravindranath.

Hi Ravi,
U can use the tcode MB51 and their u can give the input as 301 if it is 1 step in the mvt type or use 303 and 305 for 2 step transfer. and generate the report.
if u want the list of stock transport orders then use tcode ME2N and the input parameter as item category "U" and generate the report.
hope it wud have answered ur question
Reward if useful
Shawn

Report for internal order - year/period comparison

I want to create a report for internal orders with year/period (from/to) comparison.
For the present year/period i'm using CCA variables 1YRPERF (Fiscal Year/Period From) and 1YRPERT (Fiscal Year/Period To), created from field FISCPER, table RWCOOM.
Now i want to creat a column fot the n-1 period (example: if selected current period as 009.2013 to 008.2014 the n-1 period will be 009.2012 to 008.2013), any suggestion what can I do about this?
Regards
Carlos Aguiar

Hi Ajay
This is for higher education institution that have to report by fiscal year (01-12 months) and by academic year (09.year1 to 08.year2). I have two maps to do this but the challenge is to have a unique map that by dates could retreive both information.
I need a to have a column giving the total for example the Per/Yr 009.2012 to 008.2013 and other column with the Per/Yr -1.
I've tried your first option but doesen't work at all because don't work with a period like 009.2013 to 008.2014. Then i made some adjustments: first column was setted to Yr (variable: 6-GJAHV to 6-GJAHB) and Per (variables: 1NPERIV to 1NPERIB). The second column was setted with Yr (variable: 6-GJAH2 to 6-GJAH2) and Per (variables: 1NPERIV to 1NPERIB). Seems to work with a few tests!
Also i tried to creat new variables "1YRPERF" / "1YRPERT" to n-1, but had some problems with formula.
1YRPERF have a formula: '#S012-999' and 1YRPERT formula is: '#S012'.
To 1YRPERF-1 i've defined the formula '1YRPERF' -1, and for the Per to the formula '1YRPERT' -1, but seems to consider minus 1 period that the entry period. I've tried with -12 but didn't work too.
Thatk's for the help!
Regards, Carlos

MM:Release Strategy for Release Order again Approved Contract

Hi,
Release strategy for Release Order is required or not against approved contrat??
As fas as I know once the contract is approved, release order is not required to approve again.
This is the standard setting from SAP or We need to do some setting for this??
In my support project I have studied the release procedure and found that, same release strategy and release Group has been used for Purchase Order and Contract.
Please let me know if anyone have faced this rquirement or I have to go for Z development for this requirement.
Thanks you.

Hi Lalita,
Thank you for your quick suggestion.
yes definitely the release stratergy and release group should be set up separately but here both are same
that is the reason this is picking of the same release procedure again evenif the contract is approved.
we have following release characterstic for the release procedure.
1) Purchasing Group
2)Total Net Order Value
3)Order Type
4)Purchase Organisation
5)Material Group.
I think for the above characterstic we must a separater value for PO and Contract but Currently all are merge
in this only
But Can you tell me "Release Order should be subjected to release procedure" this is correct or not .
If yes then what is the base for this, I mean is it working on the concept that " If do relevent
release characterstic value is found then no release procedure and this is treated as autorelease in sap"
Thanks you.

Release orders from quotations

Hi Experts,
i trying to create release orders from quotations, but im unable to find the field which contains release orders in the popup which appears when we create with reference.
Note : I am able to create release orders from contacts.
thanks.
Raghu

U create an order with reference to Quot. and release orders for contracts.
Cheers!!!
Anupam

'No Lines Released. No exception reported. Release Order Concurrently'

Hi,
I am trying to Release a Sales Order in Oracle Apps Version 11.0.300. But while releasing Sales Order its giving an Error that 'No Lines Released. No exception reported. Release Order Concurrently'.
Please suggest what is the reason behind this error and want is the solution for it so that the Sales Order can be released successfully.
Thank You.
Regards,
Meghana.

I am trying to Release a Sales Order in Oracle Apps Version 11.0.300. But while releasing Sales Order its giving an Error that 'No Lines Released. No exception reported. Release Order Concurrently'.
Please suggest what is the reason behind this error and want is the solution for it so that the Sales Order can be released successfully.I do not see any errors reported in MOS website.
Please log a SR and see if Oracle support can help (since your application release, is not longer supported).
Thanks,
Hussein

Report for open order and shipped qty summary

Dear Folks,
           Can any one please help me.
Report for open order summary Vs shipped quantity
what are the related programs to it.
throw some light on it.

>
arpita b wrote:
> Dear rohit
>
>     Iam asking about any report which compares or give details of open order vs shipped qty.
>
> Any sis report is available for this?
Hi Arpita,
There is no such sis report available. You will have to configure and create two seperate reports and do the comparison.
If you want, I will send you the list of all T.codes used to generate reports in SD.
Revert back to me if you need the same.
Regards,
Swapna D.

Report for released orders from credit block

Similar Messages

Maybe you are looking for