Report for Slowakia shows assets and liabilities in local currency

Hello @ all,
do someone have the idee where I can find a report in SAP information system, that show me the assts and liabilities in local und foreign currency, as a legal requirement?
Tks for help.
BR
Black

Hi,
You can try the option of running the Trail Balance for Assets and Liabilities with the Opening Balance checkbox and the other for revenue and other drawers without checking the Opening Balance.
Export the values to Excel and consolidate the reports to get the required result(if that is what is needed).
Kind Regards,
Jitin
SAP Business One Forum Team

Similar Messages

  • Opening Balance only for Assets and Liabilities in Trial Balance Report

    Hi SAP B1 members,
    Following is my query :
    I would like to see the Opening balance in the Trial Balance report only for Assets and Liabilities and not for Revenue and Expenses.Though the other details such as Debit,Cumulative balance etc should be seen for all Assets,Liabilities,Revenues and Expenses.Kindly help.

    Hi,
    You can try the option of running the Trail Balance for Assets and Liabilities with the Opening Balance checkbox and the other for revenue and other drawers without checking the Opening Balance.
    Export the values to Excel and consolidate the reports to get the required result(if that is what is needed).
    Kind Regards,
    Jitin
    SAP Business One Forum Team

  • MB5B Report for Date Wise Stock and Value

    Hi,
    I am Taking MB5B Report for Date Wise Stock and Value.
    But I have one doubt all stocks is coming or not in these report like Unrestrected Stock,Return Stock.Blocked stock,Transist stock,Restrected Stock,qty Inspection Stock.
    I have another Doubt in these report three Stock type indicaters are there like these.
    1.Storage Location / Batch Stock
    2.valuated Stock
    3.Special Stock.
    But i have one doubt what is defferent these
    1.Storage Location / Batch Stock
    2.valuated Stock

    Hi Prasad,
    Yes MB5B report consider the Unrestricted, Quality, Blocked, Transit stock and restricted stock. Not sure about Return Stock.
    If you select the Storage location/Batch stock radio button then the system will display all the possible stock from the storage location and the corresponding batch also.
    If you select Valuated stock radio button then system will show only the valuated stock not the Non-valuated stock. Because Non-valuated material type is available in SAP system will not show those stock suppose if you select the Valuated stock radio button.
    Regards
    Karthick

  • Step by Step for FICO(GL,Assets and CO) Extraction

    Hi gurus,
    I am trying to see if i can get a step by step extraction process for FICO extraction cos am abt to start a project to extract and load GL,Asset and Controlling data into a BW system.I am thinking I shd be able to get a lot of the reports needed by installing the 0FI_GL_4.
    Please any help will be appreciated and points will be awarded as well.

    please search the forum before you post a thread, there are lot of threads discussing the same topic.
    coming to steps in extraction:
    install DS
    replicate DS
    create transformation between the DS and DSO
    the same applies to DSO and cube.
    But most of the times, no delivered DS supplements the clients finacial requirement, so if thats the case you would need to enhance the DS with the additional fields that would be needed in the reporting stand point

  • Report Needed to show WBS and Profit Center on Invoices

    I need a report of open and cleared invoices that show the WBS and Profit Center.
    I have tried the FBL5N and it doesn't populate it. Any other reports out there???

    You dont have to join them. Keep both profit center and cost centre in the cube. While defining the update rules, derive profit center from cot centre.
    In the report , keep profit center and cost centre as free char.
    The users can dynamically drill down and view the report for cost centre or profit centre or both.
    Another idea is to keep profit centre as a nav attribute in the cube and in that case, you dont have to derive profit centre from cost centre in the update rules.
    Ravi Thotahdri

  • Crystal Report for VS2010 show Login when deployed

    I am having a problem with my Windows Form project in VS2010 regarding
    the SAP Crystal Reports for VS2010.
    When I deploy my project on client's PC it shows a login dialog box.
    The client's PC is in XP.
    I already installed the correct runtime in their PC.
    When the login dialog box appear and the cancel button is clicked,
    the Report shows correctly.
    But our client did not want to always see the login dialog box.
    I already try to fix it like this:
    u2022 Add connection and login info in the codes (CrystalDecisions.Shared.ConnectionInfo)
    u2022 Verify and reconnect the database
    u2022 reinstall the runtime of Crystal Report(CRRuntime_32bit_13_0_1.msi)
    But nothing works.
    I am using an XML schema to display the report, I do not directly connect
    to a database. Like this:
    CrystalReport.SetDataSource(DataSet);
    The framework I use is C#.Net 3.5.
    My project is in Windows Form.
    My Crystal Report for VS2010 version is 13.0.1
    Please help me.
    Thanks in advance.

    Moved to .NET SDK forum.
    Can you clarify? What data source are you using? Direct connection to the DB or Dataset?
    It's prompting because what ever source you are using doesn't have the proper connection method being used or the log on info is incorrect.
    Don

  • Asset history report for bunch of assets

    Hi,
    I have created an asset through the following steps
    Internal Order KO01
    Budgeting T Code KO22
    Release of Internal Order  KO02
    Creation of AUC  AS01
    Creation of PO  ME21N
    Now when I see the report AW01N for this asset, everything is available on the asset history sheet.  Likewise I need such a report where I can pull out for bunch of assets with the above history informtion like IO No, PO No etc against those assets.
    I have some 500 assets for which IO no and PO no I need against each asset.
    Please tell me the standard asset report for this.
    Regards,
    babjee

    Hi babjee,
    I think you have to use for this an internal order report (line item report?. On the internal orders all information is avaiable. I think this is the reason that you use internal orders!
    On the internal order you collect all the posting and the AUC is a cost collector for short term and when you settle it to the Final asset this is the endpoint.
    I don't have seen that the information  from KO22, KO02, ME21N are direct available in AW01N
    Paul

  • Report for Material at subcontract AND PO number

    We are preparing for Inventory verification at subcontractors.
    My boss believes it would be easier for the SC vendor if we could supply the PO number for which the material was shipped.
    I haven't found such a report.  Is there one?
    If you know the tables and links, I can write a ABAP query
    Thank you for any help that can be provided.
    Althea

    Hi,
    ME2O works fine if you want to track which subcontracting PO's are still open and what is the current stock at vendor.
    ME2ON is another version of the same basic ME2O report.
    Try also MBLB - Stocks at subcontractor.
    As far as PO to 541 link is concerned, I do not think it is possible to find it unless there is some specific business process being followed which is supported by custom code.
    The reason is that when you issue against 541, you are simply providing materials to vendor that the vendor needs.
    There might be multiple open SC POs for same material/batch and there is no point in tracking against a particluar PO. Its the same material/batch the vendor receives.
    When you post a PGR for a SC PO, then the stock from vendor premises is consumed by 543 and the track to your SC PO is maintained.
    I tried maintaining EBELN as required in OMJJ for 541 but still no MSEG-EBELN is populated. Maybe I am missing something.

  • Report for pending shipments, PGI and Picking

    Hi All,
    We have few issues with the orders not being picked, if picked some are not being able to PGI and few are not going to the Shipments process. this is creating a backlog. I was wondering if we have any Report or transaction where i can check open shipments for the last 2 weeks or, open PGI which have been picked, or deliveries which need to be picked.
    Does sap has any standard report for this. Please help me.

    Hi,
    The mentioned reports (VL06F & VL06T) can be accessed from VL06O:
    VL06F - general delivery list / List of outbound deliveries
    VL06T - outbound deliveries for transportation planning
    Csaba

  • New Report for Opens Sales order and P.O from Plant and S.Loc

    Dear Gurus
    We have repory requiement for Open sales order and P.O to deliver from particular plant and S.Loc.
    If you have already developed this kiond of report help me inthis case.
    Thanks
    ramki

    closed

  • How to take a report for the assigned transaction and activity in a role

    Hi Colleagues,
    I want to take a report for the assigned transaction with activity for all roles, which are assigned to the users,
    Transaction list for a role i can able to take it from SUIM but not able to take the ACTVT for the role.
    Please suggest how to take this information.
    BR,
    Jai

    Hi Jaikumar from the post :
    I think you have reached the state of finding the USER to ROLE relationship
    Take the output to an excel,
    COPY just the roles column exactly in order do not rearrange , use AGR_1251 like other experts have mentioned
    insert the roles copied from you buffer and execute, the output will have multiple entries for each role take the output to an EXCEL again , make it unique and match the outputs between both the EXCELS.
    It will be a little tricky to do this, but I think you are proficient in MS EXCEL.
    This is one of the ways to do , there are many other ways to do it.

  • Report for shedule vs supply and report for opening stock at back date.

    Dear All Guru,
    please can anybody reply me is there any standard report is available for
    1) Report for shedule vs supply
    2) and report for opening stock at back date.(ex- opening stock at last month 16th july or two months back on 10th may
    pl suggest if any standard report is available or how we can data for this
    Regards,
    Vimlesh

    Hi,
    To see the opening stock at a particular date use T.Code: MB5B,
    To see the scheduled quantity & delivered quantity use table EKET with the filed names MENGE & WEMNG.
    Regards,
    Prabu

  • P & L report for current period,YTD and previous YTD

    I am trying to create a P & L report with the columns for current period,YTD and previous YTD,  I have include the measures as the key of columns, which by using period or YTD we can retrieve the current period and YTD column, is there as easy way to get the previous YTD? although I can get it  by using evtim to het every month and calculate the previous YTD.

    resolved, just need to bring both time and measures in the columns

  • BEx analyzer 7.0 Report for last 3 months and current month

    I need to create a report for a key figure (net value) and character (material), 0calday
    Output format:
    column1 : net value - previous year
    column2 : net value - current year
    column3 : net value - current quarter (separate columns for 3 months)
    column4 : net value - previous quarter (separate columns for 3 months)
    column5 : net value - current month
    column6 : net value - 1st of month to current date (separate columns for each day).
    Please help.
    Points will be assigned.
    Thanks
    Mary.

    Hi 
      U R infoprovider should have following time characterstics 
      0FISCAL YEAR, 0FISCAL MONTH/QTR 
    column1 : net value - previous year
      On the basis of user input data derive the year and offset it by - 1 (VYEAR-1)and make a RKF for that  .
    column2 : net value - current year
      On the basis of user input data derive the year(VYEAR) and 
       make a RKF for that  .
    column3 : net value - current quarter (separate columns for 3 months)
      If QTR is there then derive the QTR on the basis of         0calday/else if month is there then determine month range       like 1-3 = Q1  4-6  = Q2 and it will be done in user exit  
    column4 : net value - previous quarter (separate columns for 3 months)
      On the same way as above u can determine the same 
    column5 : net value - current month
      On the basis of 0calday determine CALMONTH and create a      RKF for this 
    column6 : net value - 1st of month to current date (separate columns for each day).
      Create a Exit variable type range on CALMONTH for this and 
       keep the range as 01-current month(which will be derivefrom     0calday) 
    Thanks,
    Debasish

  • Report for equipment with Asset number

    Hi
    I want report where i can get equipment number with asset number. I hecked information system. But id din't got

    Use Transaction IE05 - it is a Standard PM Module report that has Equipment number and Asset Number.

Maybe you are looking for