Report for the List of Vendor for which no Purchase order has been created

Hi ALL
Please let me know if there is any Report for the List of Vendor for which no Purchase order has been created
regards,

Hi Prateksha Vaid ,
Go to transaction S_ALR_87012093
Select accounts with no purchases checkbox and execute
Diwakar
reward if useful

Similar Messages

In need of a report that will list all vendors for all parts in our plant.

Can anyone tell me if there is a report in SAP that we can use to list all suppliers for a given material? We are operating in SAP ECC6.0 and need a report that will list all vendors that the company has used for a given part. Is there a standard report in SAP that pulls information from purchasing info records? Woud this be a custom report? I have tried using MCE3.
Also does anybody know of any SAP consultants that can help us create custom reports

For the list of vendors for the material - Me03 if source list is maintained
For list of vendors with info record - Me1m
For list of vendors with PO - Me2l
If you can give the correct requirements then your Technical consultant will develop a report in the required format.

My 3 GS has been working fine for the last two years or so but recently it has been getting "stuck" frequently when I try to do various things - answer a phone call, switch screens, go to my mail, etc.

My 3 GS has been working fine for the last two years or so but recently it has been getting "stuck" frequently when I try to do various things - answer a phone call, switch screens, go to my mail, etc.

Hello binbingogoABC,
Shopping on BestBuy.com should be easy and fun and not fraught with the kind of trouble that you describe. I regret very much that this has been your experience.
Using the information you provided when you signed up for Best Buy Unboxed I was able to locate your cancelled orders. I have requested more information from my back-office partners. As soon as I have additional details about your situation, I will reply again to this message. In the interim, I'm sorry that I must impose upon your patience.
I'm very grateful that you wrote to us with your concerns.
Sincerely,

NEU msg's (order n order changes) for the list of PO's which do not hav msg

Hi Guru's..
Due to some problem in interface, NEU messages are not triggered..So I need to get the list of PO's for which NEU messages are not got triggered...so by getting the list of PO's I can go manually and re-trigger the message again.
The NEU message includes Orders and Order change messages..Tro NAST tabel I can get the list of PO's which has NEU messages, but I need vice versa.
Thanks for all your help in advance.

Hi Ayyalas,
sorry if im not clear....my question is not to re-trigger the message in ME9F
Say for eg. for one day 22/2/2012 - there might be lot of PO's with different Doc.types around 6K PO's created..
I need to pick the PO's which do not have NEU messages from that 6K PO's.
1. I need list of PO's which do not have NEU messages for new PO's created today.
2. I need list of PO's which has been created past, but under gone changes - NEU change messages.
Thanks.

Is there a way for the sender of an email to see if it has been read

is there a way for the sender of an email to see if the email has been read?

Some email clients allow for you to request a read receipt, but the sender also has the ability to refuse to send it as well. Much of that is controlled on the receiving end.

Delivery Document has been created - showing the status of Being Processed.

Hi All.
I am facing the following typical problem.
1. Sales order has been created - showing the status of COMPLETED.
2. Delivery Document has been created - showing the status of Being Processed.
3. Goods Issue document created successfully- showing status as COMPLETE
4. Billing Document has created successfully - showing the status as COMPLETED.
5. Customer Account got updated properly.
Query: Despite of completion of SO, DELIVERY, GOODS ISSUED, AND BILLING DOCUMENT u2013 and accounting document is cleared why the outbound Delivery document status is showing as BEING PROCESSED.
If I go T-code Vlo3n see document flow
Delivery 5080789885 being processed.
Go to VF03 document flow also it is showing
Delivery 5080789885 being processed.
Aditya

Hi ALL,
Further to my query I would like to clarify the following:
It is happening since 2004 all Bom components status (Delivery being processed) all the BOM main items header status is showing completed.
It not impacting the business, but suddenly user raise query SO, DELIVERY, GOODS ISSUED, AND BILLING DOCUMENT completed why still delivery showing as being processed.
1. I have checked at SO level -- all the line items were delivered. ie: delivery, goods issue, billing completed.
2. I checked the Header Level data completed and Item Level data being processed.
3. If I look into the each item level also it is showing as being processed.
4. Even the SALES ORDER HEADER LEVEL showing the status of Completed.
5. Removed credit check in delivery.
The only issue is OUTBOUND DELIVERY DOCUMENT: Status alone it is showing as ' Being Processed' -- surprisingly!
Aditya.

How to change the internal order type when it has been created?

There is an internal order, when it being created, the user chose the incorrect order type and save it. but the internal order number is useful. so we just want to change the order type or delete the order to release the number. so can you give me some solutions to solve it. I can not find the way neither change the order type nor delete it. thanks very much.

You are unable to change the internal order type once an internal order has been created, however you can delete the IO if there haven't been any postings made.
In change mode (tcode KO02), go into the internal order. Go into the following menu: Edit > Deletion Flag > Set. Before you exit the IO, save the master record.
Depending upon your archiving settings, you should then be able to select the menu path: Edit > Set Deletion Indicator.
If the IO isn't deleted, you can "clobber" it by going into the IMG and deleting the IO using the function "Delete Test Data". This should only be done by a technical person to ensure that a mass-delete doesn't occur.
Please note that if the IO was an internally assigned number, you might just want to block it and re-use it later.
Hope this helps.
Kylie

How to get the list of values for a dynamic parameter using Web Services SDK?

I am struggling to get the list of values for a dynamic parameter of a report.I am using Java Web Services SDK ... I tried to use PromptInfo.getLOV().getValues() method but it does not work.First of all ... is this possible (to get the list of values for a dynamic param) using Web Services?Second of all, if this is possible, how should I do it ... it seems it works fine when running the report from CMC. It asks for DB logon info and after that it provides a list of values.Thx 

Your assumption is correct. We are trying to get the LOVs from the Crystal Report. I was not aware that this is not supported by Web Services SDK.We used Web Services SDK to integrated the Crystal Reports in our web application. We implemented some basic actions for reports: schedule, view instances, run ad-hoc reports.We encountered this problem when trying to run/schedule reports with dynamic parameters (a list of values from DB). We were unable to get the LOVs.Please let me know if you can think of an alternative to look at.Thanks a lot,Catalin

The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages: "Extensions may not function properly because it does not meet the dependency conditio

The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages:
"Extensions may not function properly because it does not meet the dependency condition."
OR
Extension Status is not consistent with extension set configuration."
The reason I opened the Extension Manager in the first place was to check to see if I had installed a third party extension. And I was presented with these warning symbols. I haven't added anything, I haven't done anything that would cause this.
Does anyone know how to fix this???
I am running OSX 10.9.5; Indesign CS6 version 8.0.2 And Adobe Extension Manager version 6.0.8.28.
Thanks in advance!
Nina

Many InDesign pre-installed extensions (Those extensions you have immediately after InDesign installation) define dependency rules in their mxi files. Dependency means that one extension works well only if one or more other extensions are installed and enabled. If this condition is not met, the yellow triangle warning will be shown.
You can select an extension with warning, click "Advanced" tag page in the lower right panel. You will see "This extension has dependency on: <extension name> ...". Check whether every extensions listed here are available and enabled. If not, enable them. Repeat these steps for all the extensions which have warning.

TC for the List of PO with GRR and PR

Dear all,
What is the TC for the List of PO with GRR ?
How to see pending list of purchase requisitions ?
Pl' tell related tables also for ABAP ?
Thanks.

Transaction code to view PO list, you can see it in ME2M,ME2L
Transaction code to view PR list ME5A
Full MM Transaction Codes Flow with table
Purchase Requisition ME51N (Table - EBAN) RFQ to Vendor - ME41 (EKPO, EKKO) Raising Quotation - ME47 (EKPO, EKKP) Comparison of Price - ME49 (EKPO, EKKO) Creation of PO - ME21N (EKPO, EKKO, EKBE, EKPN, EKKN, EKPV) Goods Receipt - MIGO (MSEG) Invoice (Bill PAssing) - MIRO (BSEG) Goods Issue - MIGO (MSEG) Physical Inventory - MI01( Create doc) (ISEG)
MI04 (Enter Count) (ISEG)
MI07 (Post) (ISEG)
Regardsv
venkadesh
reward if helpful

How to create a matchcode for the list of Customers "Group key" KNA1-KONZS

Hi All,
with reference to the creation of "Group key" KNA1-KONZS for Customers,
I'd like to know if is possible to create a matchcode for the list of Customers "Group key" created.
Thanks
Gandalf

Hi
MAINTAIN THE GROUP KEY IN GENERAL DATA ---CONTROL DATA SCREEN
If the customer or the vendor belongs to a group, you can enter a group
key here. The group key is freely assignable.
If you create a matchcode using this group key, group evaluations are
possible.
KNA1-KONZS
Cya
udayakumar

Event for the List Box in ALV Grid Control

Hello,
I have the below urgent requirment.
I have an ALV Grid Control built using ABAP Objects. In the grid, I have few fields and one of these fields is a List Box. Depending on the values selected, I need to enable or disable some fields. So, is there any event for the List box in ALV Grid Control.
For ex: I have 2 Fields, Designation and Commission. The designation field is a List Box field having 'Software Engineer' and 'Manager' as values. When I select 'Software Engineer', the commission field should be disabled. When I select 'Manager', the comission field should be enabled.
Early reply is hightly appreciated.
Priya

REPORT ZTEST1234 MESSAGE-ID ZZ .
DATA: G_GRID TYPE REF TO CL_GUI_ALV_GRID.
DATA: L_VALID TYPE C,
 V_FLAG,
 V_DATA_CHANGE,
 V_ROW TYPE LVC_S_ROW,
 V_COLUMN TYPE LVC_S_COL,
 V_ROW_NUM TYPE LVC_S_ROID.
DATA: OK_CODE LIKE SY-UCOMM,
 SAVE_OK LIKE SY-UCOMM,
 G_CONTAINER1 TYPE SCRFNAME VALUE 'TEST',
 GS_LAYOUT TYPE LVC_S_LAYO.
DATA:BEGIN OF ITAB OCCURS 0,
 VBELN LIKE LIKP-VBELN,
 POSNR LIKE LIPS-POSNR,
 COMISN(10),
 CELLCOLOR TYPE LVC_T_SCOL, "required for color
 DROP(20),
 HANDLE_STYLE TYPE LVC_T_STYL,
 END OF ITAB.
* CLASS lcl_event_handler DEFINITION
CLASS LCL_EVENT_HANDLER DEFINITION .
PUBLIC SECTION .
 METHODS:
**Hot spot Handler
 HANDLE_HOTSPOT_CLICK FOR EVENT HOTSPOT_CLICK OF CL_GUI_ALV_GRID
 IMPORTING E_ROW_ID E_COLUMN_ID ES_ROW_NO,
**Handler to Check the Data Change
 HANDLE_DATA_CHANGED FOR EVENT DATA_CHANGED
 OF CL_GUI_ALV_GRID
 IMPORTING ER_DATA_CHANGED
 E_ONF4
 E_ONF4_BEFORE
 E_ONF4_AFTER,
**Double Click Handler
 HANDLE_DOUBLE_CLICK FOR EVENT DOUBLE_CLICK OF CL_GUI_ALV_GRID
 IMPORTING E_ROW E_COLUMN ES_ROW_NO.
ENDCLASS. "lcl_event_handler DEFINITION
* CLASS lcl_event_handler IMPLEMENTATION
CLASS LCL_EVENT_HANDLER IMPLEMENTATION.
*Handle Hotspot Click
METHOD HANDLE_HOTSPOT_CLICK .
 CLEAR: V_ROW,V_COLUMN,V_ROW_NUM.
 V_ROW = E_ROW_ID.
 V_COLUMN = E_COLUMN_ID.
 V_ROW_NUM = ES_ROW_NO.
 MESSAGE I000 WITH V_ROW 'clicked'.
ENDMETHOD. "lcl_event_handler
*Handle Double Click
METHOD HANDLE_DOUBLE_CLICK.
ENDMETHOD. "handle_double_click
**Handle Data Change
METHOD HANDLE_DATA_CHANGED.
 DATA: X_CHANGE TYPE LVC_S_MODI,
 X_FINAL TYPE ITAB,
 L_FLAG,
 LS_OUTTAB LIKE LINE OF ITAB.
 DATA: LS_EDIT TYPE LVC_S_STYL,
 LT_EDIT TYPE LVC_T_STYL.
 LOOP AT ER_DATA_CHANGED->MT_GOOD_CELLS INTO X_CHANGE.
 IF X_CHANGE-FIELDNAME = 'DROP' AND X_CHANGE-VALUE = 'S/W ENGINEER'.
 LS_EDIT-FIELDNAME = 'COMISN'.
 LS_EDIT-STYLE = CL_GUI_ALV_GRID=>MC_STYLE_DISABLED.
 LS_EDIT-STYLE2 = SPACE.
 LS_EDIT-STYLE3 = SPACE.
 LS_EDIT-STYLE4 = SPACE.
 LS_EDIT-MAXLEN = 8.
 INSERT LS_EDIT INTO TABLE LT_EDIT.
 INSERT LINES OF LT_EDIT INTO TABLE LS_OUTTAB-HANDLE_STYLE.
 MODIFY ITAB INDEX X_CHANGE-ROW_ID FROM LS_OUTTAB TRANSPORTING
 HANDLE_STYLE .
 else.
 LS_EDIT-FIELDNAME = 'COMISN'.
 LS_EDIT-STYLE = CL_GUI_ALV_GRID=>MC_STYLE_ENABLED.
 LS_EDIT-STYLE2 = SPACE.
 LS_EDIT-STYLE3 = SPACE.
 LS_EDIT-STYLE4 = SPACE.
 LS_EDIT-MAXLEN = 8.
 INSERT LS_EDIT INTO TABLE LT_EDIT.
 INSERT LINES OF LT_EDIT INTO TABLE LS_OUTTAB-HANDLE_STYLE.
 MODIFY ITAB INDEX X_CHANGE-ROW_ID FROM LS_OUTTAB TRANSPORTING
 HANDLE_STYLE .
 ENDIF.
 ENDLOOP.
 CALL METHOD G_GRID->REFRESH_TABLE_DISPLAY
 EXCEPTIONS
 FINISHED = 1
 OTHERS = 2.
 IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
ENDMETHOD. "HANDLE_DATA_CHANGED
ENDCLASS. "LCL_EVENT_HANDLER IMPLEMENTATION
*& Global Definitions
DATA: G_CUSTOM_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER,"Container1
 G_HANDLER TYPE REF TO LCL_EVENT_HANDLER. "handler
*- Fieldcatalog for First and second Report
DATA: IT_FIELDCAT TYPE LVC_T_FCAT,
 X_FIELDCAT TYPE LVC_S_FCAT,
 LS_VARI TYPE DISVARIANT.
* START-OF_SELECTION
START-OF-SELECTION.
SELECT VBELN
 POSNR
 FROM LIPS
 UP TO 20 ROWS
 INTO CORRESPONDING FIELDS OF TABLE ITAB.
END-OF-SELECTION.
IF NOT ITAB[] IS INITIAL.
 CALL SCREEN 100.
ELSE.
 MESSAGE I002 WITH 'NO DATA FOR THE SELECTION'(004).
ENDIF.
*& Form CREATE_AND_INIT_ALV
* text
FORM CREATE_AND_INIT_ALV .
DATA: LT_EXCLUDE TYPE UI_FUNCTIONS.
CREATE OBJECT G_CUSTOM_CONTAINER
 EXPORTING CONTAINER_NAME = G_CONTAINER1.
CREATE OBJECT G_GRID
 EXPORTING I_PARENT = G_CUSTOM_CONTAINER.
* Set a titlebar for the grid control
CLEAR GS_LAYOUT.
GS_LAYOUT-GRID_TITLE = TEXT-003.
 GS_LAYOUT-STYLEFNAME = 'HANDLE_STYLE'.
GS_LAYOUT-ZEBRA = SPACE.
GS_LAYOUT-CWIDTH_OPT = 'X'.
GS_LAYOUT-NO_ROWMARK = 'X'.
GS_LAYOUT-CTAB_FNAME = 'CELLCOLOR'.
 CALL METHOD G_GRID->REGISTER_EDIT_EVENT
 EXPORTING
 I_EVENT_ID = CL_GUI_ALV_GRID=>MC_EVT_MODIFIED.
CREATE OBJECT G_HANDLER.
SET HANDLER G_HANDLER->HANDLE_DOUBLE_CLICK FOR G_GRID.
SET HANDLER G_HANDLER->HANDLE_HOTSPOT_CLICK FOR G_GRID.
 SET HANDLER G_HANDLER->HANDLE_DATA_CHANGED FOR G_GRID.
DATA: LS_CELLCOLOR TYPE LVC_S_SCOL. "required for color
DATA: L_INDEX TYPE SY-TABIX.
"Here i am changing the color of line 1,5,10...
"so you can change the color of font conditionally
LOOP AT ITAB.
 L_INDEX = SY-TABIX.
 IF L_INDEX = 1 OR L_INDEX = 5 OR L_INDEX = 10.
 LS_CELLCOLOR-FNAME = 'VBELN'.
 LS_CELLCOLOR-COLOR-COL = '6'.
 LS_CELLCOLOR-COLOR-INT = '0'.
 LS_CELLCOLOR-COLOR-INV = '1'.
 APPEND LS_CELLCOLOR TO ITAB-CELLCOLOR.
 MODIFY ITAB INDEX L_INDEX TRANSPORTING CELLCOLOR.
 LS_CELLCOLOR-FNAME = 'POSNR'.
 LS_CELLCOLOR-COLOR-COL = '6'.
 LS_CELLCOLOR-COLOR-INT = '0'.
 LS_CELLCOLOR-COLOR-INV = '1'.
 APPEND LS_CELLCOLOR TO ITAB-CELLCOLOR.
 MODIFY ITAB INDEX L_INDEX TRANSPORTING CELLCOLOR.
 ENDIF.
ENDLOOP.
* setting focus for created grid control
CALL METHOD CL_GUI_CONTROL=>SET_FOCUS
 EXPORTING
 CONTROL = G_GRID.
* Build fieldcat and set editable for date and reason code
* edit enabled. Assign a handle for the dropdown listbox.
PERFORM BUILD_FIELDCAT.
PERFORM SET_DRDN_TABLE.
* Optionally restrict generic functions to 'change only'.
* (The user shall not be able to add new lines).
PERFORM EXCLUDE_TB_FUNCTIONS CHANGING LT_EXCLUDE.
**Vaiant to save the layout
LS_VARI-REPORT = SY-REPID.
LS_VARI-HANDLE = SPACE.
LS_VARI-LOG_GROUP = SPACE.
LS_VARI-USERNAME = SPACE.
LS_VARI-VARIANT = SPACE.
LS_VARI-TEXT = SPACE.
LS_VARI-DEPENDVARS = SPACE.
CALL METHOD G_GRID->REGISTER_EDIT_EVENT
 EXPORTING
 I_EVENT_ID = CL_GUI_ALV_GRID=>MC_EVT_MODIFIED.
**Calling the Method for ALV output
CALL METHOD G_GRID->SET_TABLE_FOR_FIRST_DISPLAY
 EXPORTING
 IT_TOOLBAR_EXCLUDING = LT_EXCLUDE
 IS_VARIANT = LS_VARI
 IS_LAYOUT = GS_LAYOUT
 I_SAVE = 'A'
 CHANGING
 IT_FIELDCATALOG = IT_FIELDCAT
 IT_OUTTAB = ITAB[].
* Set editable cells to ready for input initially
CALL METHOD G_GRID->SET_READY_FOR_INPUT
 EXPORTING
 I_READY_FOR_INPUT = 1.
ENDFORM. "CREATE_AND_INIT_ALV
*& Form EXCLUDE_TB_FUNCTIONS
* text
* -->PT_EXCLUDE text
FORM EXCLUDE_TB_FUNCTIONS CHANGING PT_EXCLUDE TYPE UI_FUNCTIONS.
* Only allow to change data not to create new entries (exclude
* generic functions).
DATA LS_EXCLUDE TYPE UI_FUNC.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_COPY_ROW.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_DELETE_ROW.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_APPEND_ROW.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_INSERT_ROW.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_MOVE_ROW.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_COPY.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_CUT.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_PASTE.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_PASTE_NEW_ROW.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_UNDO.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
ENDFORM. " EXCLUDE_TB_FUNCTIONS
*& Form build_fieldcat
* Fieldcatalog
FORM BUILD_FIELDCAT .
DATA: L_POS TYPE I.
L_POS = L_POS + 1.
X_FIELDCAT-SCRTEXT_M = 'Delivery'(024).
X_FIELDCAT-FIELDNAME = 'VBELN'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = L_POS.
X_FIELDCAT-NO_ZERO = 'X'.
X_FIELDCAT-OUTPUTLEN = '10'.
X_FIELDCAT-HOTSPOT = 'X'.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
L_POS = L_POS + 1.
X_FIELDCAT-SCRTEXT_M = 'Item'(025).
X_FIELDCAT-FIELDNAME = 'POSNR'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = L_POS.
X_FIELDCAT-OUTPUTLEN = '5'.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
L_POS = L_POS + 1.
X_FIELDCAT-SCRTEXT_M = 'Drop'(025).
X_FIELDCAT-FIELDNAME = 'DROP'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = L_POS.
X_FIELDCAT-OUTPUTLEN = '5'.
X_FIELDCAT-EDIT = 'X'.
X_FIELDCAT-DRDN_HNDL = '1'.
X_FIELDCAT-DRDN_ALIAS = 'X'.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
L_POS = L_POS + 1.
X_FIELDCAT-SCRTEXT_M = 'Comissn'(025).
X_FIELDCAT-FIELDNAME = 'COMISN'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = L_POS.
X_FIELDCAT-OUTPUTLEN = '10'.
X_FIELDCAT-EDIT = 'X'.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
ENDFORM. " build_fieldcat
*& Module STATUS_0100 OUTPUT
* text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'MAIN100'.
SET TITLEBAR 'MAIN100'.
IF G_CUSTOM_CONTAINER IS INITIAL.
**Initializing the grid and calling the fm to Display the O/P
 PERFORM CREATE_AND_INIT_ALV.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
 WHEN 'BACK'.
 LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form SET_DRDN_TABLE
* text
FORM SET_DRDN_TABLE.
DATA:LT_DRAL TYPE LVC_T_DRAL,
 LS_DRAL TYPE LVC_S_DRAL.
LS_DRAL-HANDLE = '1'.
LS_DRAL-VALUE = 'S/W Engineer'.
LS_DRAL-INT_VALUE = 'S/W Engineer'.
APPEND LS_DRAL TO LT_DRAL.
LS_DRAL-HANDLE = '1'.
LS_DRAL-VALUE = 'Manager'.
LS_DRAL-INT_VALUE = 'Manager'.
APPEND LS_DRAL TO LT_DRAL.
**Setting the Drop down table for Reason Code
CALL METHOD G_GRID->SET_DROP_DOWN_TABLE
 EXPORTING
 IT_DROP_DOWN_ALIAS = LT_DRAL.
ENDFORM. " set_drdn_table
Regards
vijay

Message displayed: System extension cannot be used The system extension "//System/Library/Extensions/AppleUSBEthernetHost.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update.

Received following message during installation of an iTunes update today (9/16/14): System extension cannot be used. The system extension “//System/Library/Extensions/AppleUSBEthernetHost.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update. What is to be done about it?

Thanks for the reply. I'm not experienced in the inner workings of the iMac system and its programs, so please follow my train of thought as I try to find and understand your reply.
You wrote that I should check out "Please see - AppleUSBEthernetHost.kext error on installing iTunes update" and I did so.
There I found your reply of 9/1014 7:06 PM to j'ski stating: "There is a larger thread here which you may want to follow - system extension cannot be used AppleUSBEthernetHost.kext ."
And an earlier Post by Greg Earle of 9/10/14 5:57 PM stating: " You would have been better off doing open /System/Library/Extensions and then finding the AppleUSBEthernetHost.kext kernel extension icon in the Finder window that came up and moving it to the Trash."
And a subsequent Post on 9/15/14 at 2:59 PM by Rob Maurer stating: "This method worked perfectly for me. I am on a Mac Pro running Mountain Lion. Dragged the kext file to trash (I use EasyFind. Found the file, Revealed in Finder, dragged to Trash, entered admin password when requested). Downloaded iTunes 11.4 from the website. Installed from that download. Checked for that kext file in EasyFind again and found it had a creation date of 7/29/14 (the trashed one had a creation date from 2009). No more error messages. ITunes opens fine. Everything good. Will not update on my MacBook Pro until they fix this issue.
All of which leave me wondering - what is your answer/recommendation? Do I drag the kext file to trash, download iTunes 11.4 from the website and install it from that download, check for that kext file again to see if it has a later date than the initial one? And, if so, seed if iTunes opens okay or not? And if so, do not update iTunes again until Apple fixes whatever is wrong?

Exit for CO02-FOR QUANTITY FIELD FOR THE LIST OF LINE ITEMS

Hi,
Can anyone just let me know the user exit to code the authority check for the quantity field in CO02 for the screen SAPLCOMK.
The quantity assigned for the list of items should not be changed by the user.
For this in which exit should i go and write the code?
Regards,
P.S.Chitra

CCOWB001 Customer exit for modifying menu entries
COIB0001 Customer Exit for As-Built Assignment Tool
COZF0001 Change purchase req. for externally processed operation
COZF0002 Change purchase req. for externally procured component
PPCO0001 Application development: PP orders
PPCO0002 Check exit for setting delete mark / deletion indicator
PPCO0003 Check exit for order changes from sales order
PPCO0004 Sort and processing exit: Mass processing orders
PPCO0005 Storage location/backflushing when order is created
PPCO0006 Enhancement to specify defaults for fields in order header
PPCO0007 Exit when saving production order
PPCO0008 Enhancement in the adding and changing of components
PPCO0009 Enhancement in goods movements for prod. process order
PPCO0010 Enhancement in make-to-order production - Unit of measure
PPCO0012 Production Order: Display/Change Order Header Data
PPCO0013 Change priorities of selection crit. for batch determinati
PPCO0015 Additional check for document links from BOMs
PPCO0016 Additional check for document links from master data
PPCO0017 Additional check for online processing of document links
PPCO0018 Check for changes to production order header
PPCO0019 Checks for changes to order operations
PPCO0021 Release Control for Automatic Batch Determination
PPCO0022 Determination of Production Memo
PPCO0023 Checks Changes to Order Components
STATTEXT Modification exit for formatting status text lines
hi check your field where it is present
if it header then check with the description header most probably the first must be your exit

I used to share one apple ID/account with my ex but made a new one for myself recently and logged out of the old one but when I try to update my iBooks it asks for the old account's password(which my ex changed by now)

I used to share one apple ID/account with my ex but made a new one for myself recently and logged out of the old one but when I try to update my iBooks (only happens with this app)it asks for the other account's password(which my ex changed by now). I don't understand why this happens when I'm logged into my account and it only happens with that app. Please help, I need to update. :/

Content (apps, music, ibooks, films etc) is tied to the account that originally downloaded it, so if the iBooks app was downloaded using the account that you used to share with your ex then only that account can download updates to it. As it's a free app you could delete it and re-download it under your own account - and then re-download your ibooks into it (or copy the books to your computer's iTunes first via File > Transfer Purchases and then sync them back to the app).

Report for the List of Vendor for which no Purchase order has been created

Similar Messages

Maybe you are looking for