Report for Two Position

Hello Experts,
Is their any report available by which we can know to houw many position employee is assigned & wat are they with priority.
Also , if an employee is assigned more than one position,does it data pass to PA.That means whether we will be able to see both the positon in PA30.
Thanks.
Viru.

Hi Virendra,
Have a look at the Report RHXSTR04.. Select Reporting Period.. ALL.... and the Status as 1...
When the employee is assigned to more than one position, it checks the priority and the staffing percentage....
It's either way !!!!
Staffing percentage will not be over 100%.....in any case...
In a case where employee is assigned to two positions, with staffing percentages as 50% each, then it checks the priority...
Whichever has got the Highest Priority, it will be visible in PA; infotype 0001.
1. You may test this, by assigning two positions to employee with different variables....of Priority and staffing Percentages....
2. Next, Run RHINTE30 and create a batch run.
3. Go to SM35 and execute the Batch run...
4. Finally, go to PA20 and check the Infotype 0001 to see which position appeared.
Good Luck !!!!
Kumarpal Jain.

Similar Messages

Report for two sponsors on one project

I would like to make report for two sponsors: Each of them want to see only a Cash flow (Budgeted Expense Cost and Actual Expense Cost) that is related to him/her.
It is possible to do something similar in two ways:
1. Activity Usage Spreadsheet - Spreadsheet Fields - Time interval - Cost - Budgeted Expense Cost and Actual Expense Cost
2. Activity Usage Profile - Activity Usage Profile Options: Filter by bars/curver (Expenses); Show Bars/Curves (Budgeted and Actual)
while Timescale: Show primary Dates (Type - Calendar; Date interval - Quarter/Months).
But in both way Expenses are grouped together and it is not possible to differentiate who is financing what.
Thanks!

Yes, we are only replacing image files. So--since no one here
is familiar with merge-- if we do as you suggest using Windows
Explorer, the steps will be:
1) One writer works on his/her computer's local drive and the
other writer works on his/her computer 's local drive (no shared
drive).
2) Each writer creates an Image folder on his/her computer's
local drive
3) Each writer captures (Snag-it) images from the
application, opens the captured image in Photoshop and sizes the
new image file to match the size and width, border, etc parameters
of the image in the current Help's HTML code. (writer will have to
view HTML code to get image size)
4) Each writer will copy the new image files into his/her
local drive-based Image folder--giving the new image the same name
as the image that is being replaced).
5) The image files in the first writer's Image folder are
then copied to the Image other writer's Image folder.
6) The new Image folder containing all the new image files is
copied into the RoboHelp source directory, overwriting the old
Image folder.
7) The writer with the new Image folder (containing all the
new images) then generates and publishers the RoboHelp project.
Is this correct?

New report for Cash Position (TC - FF7A)

Hi
I want to draw cash position (FF7A) report in following format:-
1) Receipt
               AR Collection
               Other
               Total Receipt
2) Disbursements
               Payroll
               Bonus
3) Accounts Payable
               Purchase
               Freight
               Other Exp
I have done the necessary configuration for Cash Management and getting result as per standard report. Can anybody let me know how to draw above report for TC - FF7A. If possible revert in detail
Regards
DD

Hi,
Please explore custom reporting option because I don't see FF7A/FF7B giving the desired output.
Manish

Report for two persons occupying one position

Can anyone provide name of standard report to see if two or more than two persons assigned to a position in SAP. We are facing the situation and need to separate out who two or three people are assigned to a position.

Hi,
Try report RHSTRU00.
Dharitree

Reports for two costing Area With one operating concern

Hi,
What are the reports I can get if I am having two different costing area for my comapnies with same operating concern
Thanks in advance for your input
CHEERS

Thanks Sreekanth ,
I want to what are the reports that will be generated. And what cannot be done if we have two controlling area instead of one.
CHEERS

Read-only report for two records

I have a table that has two records per one parent record.
I want to display these two records on a page containing read-only fields (items) of the parent record.
I was thinking of just having two regions each of which would perform a SELECT to pull it's respective record.
Would I have to create fields for each record to load the fields into and then make each field be read-only?
I did this to load one of the records into a form:
select field1, field2 into px_field1, px_field2 where...
I just wondered if there was an easier way other than creating two sets of fields to hold each record.
I tried some of the canned reports using the wizard. Easy enough to pull the two records but the formatting goes a mile to the right and this page is to be used for printing.
Thanks,

semaphore,
Have you considered using a Master Detail form. The forms have record navigation and the detail columns of the form can be altered to Display As Standard Report Column making them read only. As well, the Master part of the form can also be configured to be read or display only.
Jeff

Standard reports For staff position In certain period

Hi experts,
My boss want to trigger all the staff position movement. Is there any standard reports to get staff position from certain period based on staff number.
Thanks in advance

Hi,
You can consider "Headcount changes" report (transaction S_L9C_94000095) where you can specify action type (e.g. Position change) and see all the activities for it.
Cheers

How to process reports with two different date fields

Morning all,
This question is somewhat similar to what I asked few days back. I created two different reports for two different departments (Credit Control and Free of Charge Control).
These two reports pull data from two different date fields and has different status check ups.
Few days back my director requested me if he can have both reports in one report. That is when I asked question from all of you regarding two reports.
Anyhow, that was created by implementing two sub reports however, the director asked me to combine the two different reports into one in such a way that the output records should be added up with each other hence one single report with all combined data of Credit Control and Free of Charges (not two sub reports in one report).
The problem here which I am getting is that, both reports uses two different date fields. I can live with two different statuses as that can be easily done within formula/RT however how to create a report with Report Selection Formula condition which looks in both date fields and produces results accordingly?
I have tried this by not putting any condition in report selection formula and ran the report, it produced total results from past 6 years.
Any ideas how to produce combined report which has two different date fields?
Many thanks in advance
Regards
Jehanzeb
What I

Charliy,
No the both dates are from two different databases, tables and fields. The Credit date field is from KLAB database under max table where as the FOC date field is from SAE database under maxmast table. Klab date is under credit2 table where as foc date is under order header table.
So its more like this:
Klab->Max-Credit2--->Credit_date
Sae->Maxmast->Order_header---Date entered.
two dates totally different tables, dbs
however, I will try your idea too and see if that works.
Regards
Jehanzeb

Reporting structure between two positions as vise versa

Hi,
Two positions for eg. AGM (A002 relationship) reporting to Deputy MG and Deputy MG (A002 relationship) reporting to AGM..as per my knowledge reporting structure between two posiitions is maintained with two different relationships i.e A002 and B002 relationship ie.if one relationship is maintained another is automatically maintained...is it possible to maintain two positions reporting to each other (A002)...Please help ASAP.....!!
Thanks

Hi Sonu,
You are asking abt a inverse relationship and yes A/B002 will do that
say AGM is the higger position and DGM is the lower so when DGM reporting to AGM it will be A/002 and when AGM reports to DGM then it will be B/002
So always the higher position is taken as A and lower is B.
Hope this clarifies ur issue.
Thanks
Swati

ALV print problems for reports with two sort fields and subtotal at each

When a report has two sort fields and subtotal at each of them, the print function is not working correctly. Please see the report below.
The second "" (single star) record (the 10 RL record) and the '*' (double star) record (the 12 RL record) are not printing.
This is happening for any standard SAP reports. Any resolution? Any OSS Notes?
     Material/Stock Code          Grade       Units Count     Unit Type     Set Position     LFT
     520085V000          7818     1     RL     A     19,682 LF
     520085V000          7818     1     RL     A     19,682 LF
*     520085V000               2     RL
     599098V000               1     RL
     599098V000               1     RL
     599098V000               1     RL
     599098V000               1     RL
     599098V000               1     RL
     599098V000               1     RL
     599098V000               1     RL
     599098V000               1     RL
     599098V000               1     RL
     599098V000          7717     1     RL     A     36,167 LF
*     599098V000               10     RL
**                    12     RL
***                    12
Thanks
Anand
Edited by: Anand Velayudhan on Feb 9, 2009 11:50 PM

Hi,
Check these OSS Notes..
Note 975777 - ALV total: Subtotals disappear from printout
Note 1039655 - ALV total: Subtotals disappear from printout II
Thanks
Naren

Unable to generate spool for two tables in report output

Hi,
I created report with two custom containers displaying two tables in output. When I execute the report in background spool is created only for one table in top custom container.
What should be done to generate spool for both the tables in two different custom containers.
Thanks,
Abhiram.

Hi,
Check the bellow link for your requirement.
<<link removed>>
Regards,
Goutam Kolluru.
Edited by: kishan P on Feb 2, 2012 1:50 PM

HT1391 Recently my iPod touch 4th gen. was stolen. I have had it for two years, so I don't have a warranty on it anymore. I reported it to the police, but what will apple do? This one kid reported to them that his was stolen and they gave him a new one.

Recently my iPod touch 4th gen. was stolen. I have had it for two years, so I don't have a warranty on it anymore. I reported it to the police, but what will apple do? This one kid reported to them that his was stolen and they gave him a new one. Will they do the same for me? Is there any other way I can get all my pictures from my iPod without iCloud set up? Would Apple be able to lock up my iPod so they cant use it at all? Please help me, thanks (:

ipod touch lover wrote:
Recently my iPod touch 4th gen. was stolen. I have had it for two years, so I don't have a warranty on it anymore. I reported it to the police, but what will apple do?
Nothing... why would they do anything?
Apple does not provide insurance and they are not law enforcement.

Issue with Report to get Position value for each Class ID.

Hello Experts,
m working on a report where I want Position values as on date.
for an entered date report should give position value(Amount for transaction) for each class Id.
I m trying using the exit variable but could not reach the output.
For date I created an exit variable which shoud return the latest position for each class Id.
Now this exit variable is "ready for Input" . when I debug my code it takes i_step =3 and i_vanm= " " after i_step = 1 and i_vnam = "<variablename>"
how do I go about to get the solution.
Guide me to come up with desired output.
Thanks in Adv.
Bhavna.

Hello Experts,
m working on a report where I want Position values as on date.
for an entered date report should give position value(Amount for transaction) for each class Id.
I m trying using the exit variable but could not reach the output.
For date I created an exit variable which shoud return the latest position for each class Id.
Now this exit variable is "ready for Input" . when I debug my code it takes i_step =3 and i_vanm= " " after i_step = 1 and i_vnam = "<variablename>"
how do I go about to get the solution.
Guide me to come up with desired output.
Thanks in Adv.
Bhavna.

Report for Positions by Trader in Securities

Hi,
I searched for various reports but could not find an option to select Trader in order to generate a report for positions (or journal/transactions/cash flows) in Securities.
I need a report in Securities which should have a selection for Trader and Portfolio fields among others (similar to TPM20). Is there a way in the standard SAP reports?
Thanks in advance,
Durga.

Hi,
For securities, position management is supported at maximum against ID, Security Account/Portfolio/Fund and Gen Val Class (Fund from EhP4 onwards).
Trader field is not a key figure where you can get accumulated position report.
If you wish to maintain trader wise position, the possible way out will be to map Gen Val Class or Portfolio one to one with Trader. Or develop a customized position report considering trader into consideration but condition/corporate action flows will not be under control as clarified by Ravi. Look for a customer exit code to call Trader in that case.
Regards
Prasad AV

Vertically sync time position for two or more 2D axis systems?

In DIAdem: VIEW,
Is it possible to vertically sync the time position for two or more 2D axis system charts placed above each other?
I have displayed several channels on one 2D chart, and one channel of particular interest on a separate chart above, which was very easy to do. It would be really useful to sync the time position on both charts, such that scrolling one chart also scrolls the second chart, or zooming one chart also zooms the second chart to the same area, which seems like a fairly basic thing to want to do, but I haven't found a way to do it yet.
Any help greatly appreciated!
Solved!
Go to Solution.

Hi Brad,
Yes, I have been using that method, which works fine up to a point.
But, say you have several curves displayed on the bottom chart, with the Y-Axis set to "n Y-axes", then the start of the x-axis will be further across to the right than the top chart which has only one curve displayed.
It is possible to add an empty area to the left of the top chart, to push the start of the x-axis across into alignment (see attached), but every time you add or remove a curve on the bottom chart, or the scale changes enough to add a digit, the start of the x-axis moves and the top chart needs aligning again.
I'm really after a method to lock both ends of both x-axes to the same vertical screen position, so everything stays aligned automatically?
Attachments:
chart - full.JPG ‏152 KB
chart - detail.JPG ‏145 KB

Report for Two Position

Similar Messages

Maybe you are looking for