Report for Users Personal Time Zone Set.

Hi All,
Is there any report or transaction code, which can give me the list of users with their Personal Time Zone set by Individual on the ECC 6.0 system?
Thank You in Advance.

You are assuming that there is a standard report but so far no-one can recollect it.
Have you done the following:?
1. Identified the relevant field
2. In SE84 do a "where used" on that field to ID the tables it is in
3. Looked in all those tables
If it's directly in a table then that will help, if it's stuck in a structure then that's not so good.
You could also do a trace via ST05 to see what tables are referenced or updated when you make the change

Similar Messages

  • Critical: Personal Time Zone not showing up for users

    Hi Experts,
    There's a issue that we are facing regarding time zones for users. Even  after maintaining Personal time zones of users in there SU01, users are not able to see data in the system as per there local time zone. It is still showing in the default time zone. Is there paramter that is to be maintained for putting personal time zone into effect.
    Regards
    Rasheed

    Hi Rasheed,
    Usually when Timezone customizations are performed, the display is only converted on the screen for the end user. The actual data in DB still refers to System time zone... This conversion (Display) is supported for only a few objects like Notifications, confirmations and orders... Usually objects like change documents, logs, archived data and workcenter data does not have this conversion functionality...
    In this case, i dont think we have timestamp in MB51 as its only posting dates that get logged... You can consider posting a query in MM forum to get answers on customizations but from a security standpoint i dont think we have any way to attain this requirement....
    ~Sri

  • Same user has different time zone setting in Analytics & BI Publisher

    Hi All,
    i am using OBIEE 11.1.1.3.0 now,
    1) when login to http://localhost:9704/analytics, the time zone setting is (GMT+08:00) Taipei,
    2) when login to http://localhost:9704/xmlpserver, the time zone setting is [GMT-11:00] Midway Island, Samoa,
    it is different, why? and i can't even modify the time zone setting in BI Publisher.
    Regards,
    Makson

    do you know how does the default time zone setting come from?It comes with the installation itself default. or it will be related to some database timezone that will be taken by BI.
    default time zone values can be changed with variables that have been newly introuduced system session variables like TIMEZONE in OBIEE 11g
    TIMEZONE --> Contains the time zone of the user, typically populated from the LDAP profile of the user.
    By,
    KK
    Edited by: KK on Oct 29, 2010 3:07 AM

  • Regional Settings - User Profile Time Zone

    The user profile property time zone will only apply to the users My Site. How can you apply that time zone to the web application or site collection? So that a user from San Francisco will see calendar events on the main intranet in PST, rather than
    CST.

    Hi Peter,
    Per my knowledge, if the time zone in the user profile is different from the time zone in the site, the time displayed in the site will be in the format based on the time zone setting in user profile.
    After changing the time zone in user profile, it needs some time to save the changes back to SharePoint, so there will be some time delay of changing the time format in the site.
    Please also make sure that the Always use my personal settings is selected in user profile.
    Even though the time zone is not changed in the site, the time format will change based on the time zone setting in user profile if the user chooses a different time zone in his user profile.
    Thanks,
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

  • Is PGI date beased on system date or user profile time zone date?

    Hi All,
    When doing PGI what date system will take as Actual good issue date ? whether the System Date or User local Time zone date which maintained in User profile. If you have any idea on this please share.
    Regards,
    Lakshmikanth

    Hi,
    You need to check with the basis team for settings this to your local time.
    You can also check the field Personal time zone of the user in t.code SU01. I am not sure this will update the timings in the database when the user performs some action.
    Regards

  • How to use different xsl's for user first time logon in OAM

    Hi,
    We have a requirement to use different stylesheets (xsls) for employees and customers in OAM. How we can configure different XSLs for user first time logon to OAM (i.e for change password and configuring challenge and responses).
    Any pointers on this is appreciated.
    Thanks in advance..
    Srikanth

    XSLs displayed are controlled by the StyleCookie. So if you can set the value of this cookie to be different front customers and employees, they will see different styles.
    You can do this in various locations -> from the web server, from the url, custom plugins, etc....
    -Raj

  • Time zone setting

    I can't seem to locate a time zone setting for Adelaide South Australia on my nano. It's available as a city on the clock but not for me to select as my time zone...am i missing something here!?!
    Cheers,
    Neil

    Yes I have the same problem. It's strange that you can select Adelaide in clock section but not in the time zone. It's also silly that you can't select the GMT offset manually.
    Apple, is there any way around this? How about a patch that would fix this problem?
    Yev

  • Time Display reverts back to automatic time zone setting after I  set it to manual

    Time Display reverts back to automatic time zone setting after I  set it to manual

    That's probably an issue with '''cookies''' rather than with clearing browsing history. Are you clearing your cookies, too?
    If you want to continue clearing your cookies when Firefox closes, look for an extension that will save the cookie for a preference like that one
    [https://addons.mozilla.org/en-US/firefox/search/?q=cookies&cat=all&lver=any&pid=1&sort=&pp=20&lup=&advanced= AMO search for "cookies" extensions]

  • Daily report for user sessions in oracle10g database

    I would like to genarate the daily report for user sessions in oracle10g database
    daily report of how many of sessions present in oracle database for each user

    Thanks for link ( I know you always post the oracle document link here)
    But I am expecting scripts( someting like logon trigger and logg off trigger) to genarate the user session report.

  • How to update time zone setting in Aperture 2

    When you install Aperture 2 you specify a time zone. However, I can't figure out how to change Aperture's time zone setting. I used to live on EST, so most of my photos are in EST. But since then I've moved to HST (Hawaii Standard Time) and purchased a MacBook and Aperture 2. I'm now trying to import photos taken in EST and can't seem to import them with the correct EST date/time. I changed my MacBook settings to EST and the date/time in the import window shows the label "EST" but the time has been adjusted to 5 hours ahead, which is HST. It is still adjusting the time from EST to HST even though my MacBook is setup to EST at this moment in time.

    Have you tried changing the date time settings in your camera?
    Tony

  • Is there any standard report for employee Personal information.

    hi
    is there any standard report for employee Personal information regarding
    Persoanal No.
    Name of employee.
    Designation.
    Department.
    Joining Date.
    Birthdate.
    Basic Salary.
    DA.
    HRA.
    Thanks

    Hi,
    Refer to
    Tcode S_AHR_61016369 - Employee List
    And for payroll result refer to Function module "HRCM_PAYROLL_RESULTS_GET"
    Hope that helps.
    Regards
    Mr Kapadia
    ***Assigning points is the way to say thanks in SDN.***

  • My iCal is off by 1 hour - same time zone setting

    Help!  I've been through numerous forum posts regarding iCal quirks and I can't find a solution to my problem.
    I use MS Outlook at my work and sometimes, I send myself an appointment on my home account so I can see the same personal appointment on both calendars.  Today, I set an event for tomorow morning 9AM on MS Outlook and I invited myself on my icloud.com account.
    When I received the meeting invitation for 9AM, it shows that the originator (me) sent the invitation for 9AM in the time zone I was sending it from but on my iCal the time the meeting shows up is 8AM.  It's off by 1 hour.
    I've verified all my time settings in my computer and I can't find any setting that will move the time to the correct time.
    The time zone where I'm sending the Outlook invitation is set to GMT-5:00 Eastern Time.  I used the 'set time zone automatically' feature in the Mac System Prefs and the city next to where I'm located is automatically detected.  The location is coming up within a confirmed time zone that is GMT-5:00 Eastern Time.  The two calendars should match but they're off by 1 hour.
    Any suggestions on what I might try to fix the problem?

    Over the weekend my computer shut down due to battery running out, which I now know dumps all Mail accounts.  Between this issue with the time zone and the loss of my Mail data I have switched to Outlook 2011.  It has been a bit of a pain to re-setup a mail program but my meetings are now making it to my calendar correctly.  Of course outlook and iCal don't play friendly either so I have to drag and drop to get things onto my calendar but at least I'm making it to my meetings at the appropriate times.
    Mine time issues were with webex meetings.  Thanks for confirming that it wasn't my system alone.

  • Performance Problem when executing the report for the first time.

    Hi,
    We have a Zreport...to improve the performance i created Index on few Data Base table..before my changes it used to take more than 15 minutes after the changes it taking less than 1 min for the same variant and for other variants also.
    But when executing the first in morning its taking the same time more than 15 min.Please let me know how to increase the performance when executing first time also,
    Thanks,
    Kiran.

    Hi all,
    Appreciate your valuable replies...
    @ Thomas: i do accept with your solution running a background job..but user is not accepting for it..thanks for your reply.
    @Siegfried Boes  : for testing purpose Im running this manytimes..but for user they may
    require when ever they need to know open oders.the volume of the data is barongs 300-350 at
    max.
    @Brad Bohn  : After creating the index the repose time reduced to half ...i hope  i have
    created a right index.
    Observation here...I executed the report in production system more than 5 times it took the
    same time, my changes are still in quality..so i think may be for selecting the right index
    its taking this much time.and for the next time is taking right index n doing it so it taking
    less.
    Do you accept it?.if so Please let me know how to explicitly say the select statement to
    use my index.
    Thanks,
    kiran.

  • Standard report for User defined feild in order operation

    Hi all,
    do we have any standard report? for User defined field in order operation. actually we have User defined field in task list and same could be reflected in order operation. so i am using those user defied field to record extra info in maintenance order.  i am wondering how to get the reports . do we have any standard reports?
    thanks
    Amit kushwaha

    Dear Amit
    I have utilised 3 user fields & activated order enhancement tab. I could find these three fields in report IW37N & IW49N. I m using ECC 6.0 EHP4. Try to set the layout & look for  fields - user field for quantity in the layout. For this please maintain some data in these user fields of some orders and then check for those orders in t code- IW37N & IW49n.
    Shakti

  • Reports for User's T-code.

    Hi All,
    I want to know is there any report to find the what are all the  T-code user has in his user master data.I want to generate this report for bulk user at a time.I can see in SUIM where we can generate for single user not for Bulk user.Please suggest me right solution,Guru!
    thanks in advance!
    Naveen

    I met CSI at a kongress a few weeks ago and pressed them a bit on how this works. Eventually they fezzed up about the table read but mentioned that in the next release being developed it would be different...
    Problems with this is that the FM has a couple of limitations, so you cannot read all tables correctly... so you end up reading some of the wrong ones or taking the easy ones.
    Another option is to let the database itself do the hard work, to get back to the performance aspect.
    Anyway, for neither of these two do you need any tcode, so indeed we are drifting off topic...

Maybe you are looking for