Report format issue in OBIEE 10g sent through iBot

Hello Expert,
I have scheduled an ibot report through ibot to my official mail id. We are using Lotus notes. I am sending report as a mail body so i am selecting HTML in delivery type.
this is the report is not comming as it is , the column width is getting srinked. I have tried with to put width in Aditional formating as well. But there is not effect in the report.
Please revert.
Thanks in advance.
Niraj

Try by setting view properties like Table or Pivot table if this is not working then attach the report to a page and set the section properties and see how it works.
If this is not working then Notes might have trimming it ;)
If helps pls mark

Similar Messages

  • Report format issue  in obiee 11g  send  through Agent

    Hi,
    I have scheduled the agent to send the report to IBM Lotus notes. I need to send the report to users in text format and not an attachement.
    The report not comming as it is,the column width is getting srinked.I noticed CSS not applying in Lotus notes.
    How can i apply css to lotus notes. can anyone please suggest..
    Regards,
    944656

    Try by setting view properties like Table or Pivot table if this is not working then attach the report to a page and set the section properties and see how it works.
    If this is not working then Notes might have trimming it ;)
    If helps pls mark

  • Problem in navigating from one report to another in OBIEE 10g

    Hi,
    I am facing an issue with OBIEE 10g while applying navigation on my reports.
    Lets suppose I made a report showing list of all items(in broad categories) sold on a particular day, say Dairy, Frozen Foods, Chocolates etc.In this report there is a date prompt showing the date of sale.
    Now there are certain items that are distributed within these categories, like dairy includes milk, cheese, butter etc.
    Hence, my navigation should be like when I click on a particular item category, the control should move on to the report which has all items under that particular category and the prompt for this report should show the same date as passed in the previous report.
    But sometimes what happens is that on clicking the navigation from first report to the second one, the date is not persisting in the prompt. I say sometimes because at times the navigation does work correctly. This is a bug of Obiee or something which is giving unexpected results.
    Kindly help with your suggestions.
    Thanks
    Ankita

    Ankita,
    This is not a bug in OBIEE...I'm sure something is missing. If this is working for some cases and not working for some other case then you will need to find the root cause. Try in bits and pieces...Step by Step with some dates (unit testing). Ideally this shud work properly.
    For an instance try with OBIEE drilldown feature and not with navigation with a single sale date and observe the behavior.
    Hope its clear...

  • XI R2 To 3.1 Sp2 migration and report format issues

    Hello,
    is there a way to fix or troubleshoot report format issues after migrating to 3.1?
    We have a heavy report that the format (the way the report looks) is very important. In crytal Reports 2008 sp2 the format is OK.
    But from BOE CMC or from url reporting the report format have problems.
    Thank you
    Edited by: RUHVER BARENGI on May 18, 2010 9:47 AM
    Edited by: RUHVER BARENGI on May 18, 2010 9:48 AM

    Hi Ruhver,
    Crystal Report documents are heavily dependant on the printer driver for formatting.  If you design the report using a specific default driver than it will be dependant on that printer driver for formatting.  When you publish it to Enterprise, the same printer driver may not exist so the report will be re-formated to fit the default driver on the server, or if no driver exists, it will use an internal method to format the report. 
    Try this as a test.
    1) Open your report in the CR 2008 designer.
    2) Click on the File/Page Setup. 
    3) Select the "No Printer" option.  This tells the report to use this internal method to format the report
    4) Save this document as "Title - No Printer"
    5) Export it to Enterprise
    6) Test this report again.  Formatting should be identical in BOE vs CR.
    Keep in mind that when you change the driver in step 3, the report in the designer will re-format.  You may need to tweak the report again in order for the formatting to be as desired.
    Test this out and if you require further assistance with this, I would suggest opening a message.  This is a common issue and a support engineer could likely help you with this pretty easily.
    Hope this helps,
    Jb

  • Error  in reports after upgrade from OBIEE 10g to 11g :  [nQSError: 14025]

    Hi All, We upgraded RPD and web catalog from OBIEE 10g to 11.1.1.5. I see the following error while running few reports.
    Error: State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A
    general error has occurred. [nQSError: 43113] Message returned from OBIS.
    [nQSError: 14025] No fact table exists at the requested level of detail:
    When I add an user under BIAdministrator Application role and login, all the reports work correctly.
    I verified Oracle BUG fix (11850704) document and tried to make changes as suggested.
    Please suggest me if this issue is related to 10g to 11g RPD upgrade or are we missing any privileges?
    Also should I add every user to BIAdministrator role to avoid this issue?
    Thanks in Advance

    Hi,
    First of all i am not familiar on linux box.
    I tried in windows environment the rpd is deployed with out any errors.
    But i ran the ua.bat file in the following path
    \MWHOME\Oracle_BI1\bin\ua.bat.
    while i am running in oracle_common\bin\ua.bat is not responding in my local system.
    Please Mark if it helpful.
    Thanks

  • Grid lines appear in bold format in Graphs - OBIEE 10g

    Dear Experts,
    I am facing an issue with the grid lines in the graphs in reports.
    All the graphs in reports(webcat) are appearing with 'bold GRID lines' instead of normal grid lines which in turn is affecting the look and feel of the graphs in the webcat. Is there any way to eliminate this by setting any parameter in XML files?
    I am using OBIEE 10g version. Kindly let me know your inputs so as to eliminate this bold grid lines in all the graphs.
    Thanks,
    Sam.

    Hi,
    Refer this and it might be help you.
    Re: Remove grid lines by default in chart view
    Thanks,
    Satya

  • Reporting format Issue .. Result  row Count Display...URGENT!!!!

    Hello All,
    Need solution for my issue in reporting,
    This is my Report format
    Date              A/c number   Kf1   Kf2 Kf3
    01.06.07            123         10    20   0
                       234          20    30   30
                       456          50    0  25
                       789           0   25   0
                       Result       80   75  55  
    01.07.07            124         10    0  10
                        134         30   30  30
                        457         40    0   0
                        788         0   25  10
                       Result       80   55  50
    Now my requirement is to display Count in the result row as
    Date             A/c number    Kf1  Kf2 Kf3
    01.06.07        123            10   20   0
                    234            20   30  30
                    456            50    0  25
                    789             0   25   0
                    Result          3    3   2  
    01.07.07        124            10    0  10
                    134            30   30  30
                    457            40    0   0
                    788             0   25  10
                   Result           3    2   3
    and to be more precise this is my requirement
    Date        Kf1  Kf2 Kf3
    01.06.07     3    3   2
    01.07.07     3    2   3    
    I made key figure Calculate Result as Count <> 0 and Calculate single value as Supress Result for each key Figure and A/c Number No display I got result like this showing all data as blank, however the rows will exist.
    Date          Kf1  Kf2 Kf3
    01.06.07                                                                               
    3    3   2  
    01.07.07                                                                               
    3    2   3
    But I need my result should be like this
    Date        Kf1  Kf2 Kf3
    01.06.07     3    3   2
    01.07.07     3    2   3   
    How can I Acheive this either by work Book Or  by Query ,
    Please help me
    Thanks for all ur support in advance
    Sai.

    Hello Boujema,
    I Created formula variable replacement path  in the same way you mentioned but this is irrespective to KF giving the Characteristic Account Number count...
    Hello All,
    please go through my requirement
    this is my report
    Date        AC no  Kf1 Kf2
    01.06.07     XXX   10  12
                 yyy   15  10
                 zzz    5   0
               result  30  22
    If I remove Ac no from this it gives me a result as summation
    Date        Kf1 Kf2
    01.06.07    30  22
    In the same way the KF should give me count of the accounts
    Date        Kf1 Kf2
    01.06.07    3    2
    But I am getting now as If I mention Count<> 0 in KF properties
    Date        Kf1 Kf2
    01.06.07     1    1
    If I place Account Number in report which I dont want to Then i will get count
    Date        AC no  Kf1 Kf2
    01.06.07     XXX   10  12
                 yyy   15  10
                 zzz    5   0
                Result  3   2
    Hope you understand my requirement and come up with any solution.
    Thanks for your help,
    Sai.

  • Report Graph issue  in OBIEE 11.1.1.6

    Hi All,
    Reports with graphs which were working in OBIEE 11.1.1.3 and OBIEE 11.1.1.5 are not working in OBIEE 11.1.1.6.
    It displays only table views and in graph section it only displays prompt values without the graph.
    I have tried these reports from line to bar and bar to line but did not work..Only worked if i go for a pie chart.
    Most of the reports have failed bcoz of this issue in OBIEE 11.1.16?
    Did anyone face this prob?
    Is it a know bug?
    Thanks

    Hi 913804
    I am amazed you found the browser certification of OBIEE 11.1.1.6 I could not find it anywhere in the documentation nor from metalink personell.
    Regarding the graphs not showing, we found this to be an issue with IE and not with Firefox. First make sure you have followed the upgrade step listed in
    3.9.11.2 Updating Oracle Business Intelligence Catalogs from http://docs.oracle.com/cd/E23943_01/doc.1111/e16793/patch_set_installer.htm#PATCH250. Then the last resort was to recreate the graph component in each report from scratch. As you say pie charts are unaffected.
    Regards,
    Nick.

  • Write back  issue in obiee 10g

    Hi all,
    While updating data in DB using obiee 10g i am getting an error system is not able to read the template while updating.
    i have put the template in \OracleBI\web\msgdb\customMessages folder . Can anyone please suggest what might be the problem .
    below is the XML template i am using.
    <?xml version="1.0" encoding="utf-8" ?>
    <webMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
    <webMessageTable lang="en-us" system="writeBack" table="Messages">
    <webMessage name="WriteBack_Update">
    <XML>
    <writeBack connectionPool="WBC">
    <insert></insert>
    <update>UPDATE test SET COL3='@{c2}' WHERE COL1=@{c1}</update>
    </writeBack>
    </XML>
    </webMessage>
    </webMessageTable>
    </webMessageTables>
    Please help.

    Hi,
    Insert query is not mandatory.
    But you need to include a space between <insert> </insert>. So that s how it works. Check the xml with space in between the insert tag and it will work fine.
    This will resolve your problem. Please award if its helpful/useful to you.
    Regards
    MuRam

  • Report Links issue in obiee 11g

    hi all,
    we are using obiee 11.1.1.5 version. we are facing issue with report links. when there is no data in the dashboard, the dashboard is displaying only Refresh button, it is not displaying Export and Print(even though we customized the report links to display Refresh, Export, Print). when there is data in the dashboard it is displaying Refresh, Export and Print as expected. Is this product limitation or a bug in obiee.

    You need to repost this in the OBI-EE forum.

  • Crystal Reports Formatting issues when exporting to Word Editable document

    Version: CR XI, I am editing a document exported from CR to Word Editable
    When exporting to a Word Editable (.rtf) document the formatting changes.  For example: lines that were drawn in the report do not come across, there  is a tab in front of each line and a carriage return at the end of each line and spacing and justification formatting are not the same.  Is there a way to export to Word Editable and keep the formatting integrity? This report was developed by a third party but I can edit it if needed.

    Pages 5 is, as an early reviewer put it, "an unmitigated disaster." Not only does it lack some 100 feautres that are present in Pages 09 (4.3), it is also VERY buggy, A quick look through these discussions will reveal a painful litany of data corruption, files that cannot be opened, lost data, and other anomalies. Links do not export reliably to PDFs, and, as you've discovered, export to .docx format is unreliable. Sadly, the best advice is to trash Pages 5.1 and use Pages 4.3 or — yes, it's come to that — Word instead.

  • Date Prompt Format issue in OBIEE

    Hi,
    I am using a Date column in a Dashboard prompt. When i select a date in Calendar its showing up the Date in a correct format *'D/M/YYYY'*. But as soon as i click on GO button the format changes to *'YYYY-MM-DD HH:MM:SS'*.
    This format is passed to report and report throw an error *'A date value was expected (received "2010-01-26 00:00:00")'*.
    I searched metalink and blogs and got a patch to resolve this issue. But still after running that patch i am getting the same error. None of the workarounds given are working.
    Please respond if you have any solution for this.
    Thanks
    Swami

    Hi,
    What is the data format for the colum, you are comparing with the dashboard prompt, in the Answers request? Specify it to custom and use [FMT:dateShort] for Custom Date Format.
    Thanks
    Mahesh

  • Report format issue.,

    Hi all
    I have below values to create report. can anyone provide any inputs to get the format which i given below please.
    Chars:           customer, calmonth.
    Key Figures: value, quantity, total (calculated key figure already defined)
    *Expecting format:*
                             January       |                February      |                   March                           
                       value    quantity |         value    quantity  |      value      quantity    |    TOTAL  
    customer
    cust1
    cust2
    cust3
    cust4
    Waiting for any inputs.
    Thanks
    swetha

    Hi Swetha,
    Welcome to SDN  !!!!
    Put the 0CALMONTH in the cloumns (Which is on ur righthand side in the query designer) and restrict it with values Jan,Feb and March.In the default created structure put all your Key figures like quantity ,total (again on the riight hand side) and in the rows drag the customer .
    This shud satisfy your requirement.The Colmonth and KFs n Column and Customer in Rows.
    Also check the format what u want in the Query dsigner itself after u drag and dropt eh KFs and Chars,the system itself proposes the format ,just below the Column and next to Rows.Do try out this to get ur format.
    rgds
    SVU123
    Edited by: svu123 on Apr 5, 2011 8:51 PM

  • BEx Reporting Format Issue

    Hi,
    I need to create a HR-BW BEx report in the following format.
    For each employee number, i need to display following 3 rows of information:
    For example, for employee number: Emp1, following 3 rowd should be present.
    01 Year Of Experience                                            
    02 Years of service                                                
    03 Years in Entitlement for annual holidays              
    I am having required data is available in the InfoProvider from the source system. Can you please help me, how can i create the BEx report in the above specified format?
    Thanks!
    Best regards,
    Venkata.

    Venkata,
    It is very easy to create such report.
    1. Open the BEx Query Designer
    2. IF you are using 7.0 you will see tabs with Filter and Rows/Colum
    3. Goto Rows/ Column
    4.You must be using KEy Figures for Years of Exp, Years of  Service
    drag those in the rows
    5. SAve the query and execute it using the BEx Analyzer. Open Query.
    Ask some ones help for the Name spacing standards you follow in your organization
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30db8c61-25d3-2b10-2998-a5937f7b783d
    Hope this helps.

  • Financial Reporting Formatting Issue

    Hi Experts,
    I have 10 columns out of that
    1st column have 3 character strings
    2nd column have 30 character strings
    3rd column have 60 character strings
    And so on.... every column having different count of character strings
    I can set columns width for each one but I am looking for an option like "auto fit"(what we have in Planning web forms) to set column width for all columns of
    in my Financial Report.
    Please let me know if there is such type of option in FR
    Thanks & Regards,
    User8921306

    Hi,
    Thanks for your response... but I am looking for option like "Auto Fit"(what we have in Planning web form to formate the columns) with that we can give respective column size based on length of the string each column contains... If there is any option in FR then let me know.
    Thanks & Regards,
    user8921306

Maybe you are looking for