Report from ME21N

Suppose we  have raised P.O for 100000 Materials on Oct 2010.
Till the date we are receiving the goods in Every alternative day , say some "n" number of  goods per day.
If  we want to check the particular  line item wise deliveries for a particular date,
how can we  check the GR for that  or how can we take report for  that without using ME22N, ME23N,
Without using Material documents and without taking any help from the ABAPERu201D.
Is it possible from ME21N,as the buyer is authorized with ME21N and dont have access to any other Tcodes.
This sounds crazy, but this is the clients requirement
Thanks

Hi
ME21N is use to create po only  ,how you get Po history from same ?
it is not possible in sap
try this code
ME2N
ME2M
ME2L
SAP1
ME80FN
OR TRY TABLE EKBE ( PO ORDER HISTORY)
Regards
Kailas Ugale

Similar Messages

  • Update was terminated while creating purchase order from ME21N

    Hi Experts,
    We are getting this dump when try to create purchase order from ME21N;
    Our system ECC 6.0 and IS-AFS (Apparel & Footwear Solution) V600 component has installed,
    How can we prevent this error,
    Regards
    Here is the dump and sm21 log,
    Runtime Errors         LOAD_PROGRAM_NOT_FOUND
    Exception              CX_SY_PROGRAM_NOT_FOUND
    Date and Time          10.10.2008 10:22:03
    Short text
         Program "RMCMS431 " not found.
    What happened?
         There are several possibilities:
         Error in the ABAP Application Program
         The current ABAP program "SAPLMCS4" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
         or
         Error in the SAP kernel.
         The current ABAP "SAPLMCS4" program had to be terminated because the
         ABAP processor detected an internal system error.
    What can you do?
         Note down which actions and inputs caused the error.
         To process the problem further, contact you SAP system
         administrator.
        Using Transaction ST22 for ABAP Dump Analysis, you can look
        at and manage termination messages, and you can also
        keep them for a long time.
    Error analysis
        An exception occurred that is explained in detail below.
        The exception, which is assigned to class 'CX_SY_PROGRAM_NOT_FOUND', was not
         caught in
        procedure "TMC2F_FROUT_CALL" "(FORM)", nor was it propagated by a RAISING
         clause.
        Since the caller of the procedure could not have anticipated that the
        exception would occur, the current program is terminated.
        The reason for the exception is:
        On account of a branch in the program
        (CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)
        or a transaction call, another ABAP/4 program
        is to be loaded, namely "RMCMS431 ".
        However, program "RMCMS431 " does not exist in the library.
        Possible reasons:
        a) Wrong program name specified in an external PERFORM or
           SUBMIT or, when defining a new transaction, a new
           dialog module or a new function module.
        b) Transport error
    How to correct the error
        Check the last transports to the R/3 System.
        Are changes currently being made to the program "SAPLMCS4"?
        Has the correct program been entered in table TSTC for Transaction "ME21N "?
        If the error occures in a non-modified SAP program, you may be able to
        find an interim solution in an SAP Note.
        If you have access to SAP Notes, carry out a search with the following
        keywords:
        "LOAD_PROGRAM_NOT_FOUND" "CX_SY_PROGRAM_NOT_FOUND"
        "SAPLMCS4" or "LMCS4F10"
        "TMC2F_FROUT_CALL"
        If you cannot solve the problem yourself and want to send an error
        notification to SAP, include the following information:
        1. The description of the current problem (short dump)
           To save the description, choose "System->List->Save->Local File
        (Unconverted)".
        2. Corresponding system log
           Display the system log by calling transaction SM21.
           Restrict the time interval to 10 minutes before and five minutes
        after the short dump. Then choose "System->List->Save->Local File
        (Unconverted)".
        3. If the problem occurs in a problem of your own or a modified SAP
        program: The source code of the program
           In the editor, choose "Utilities->More
        Utilities->Upload/Download->Download".
        4. Details about the conditions under which the error occurred or which
        actions and input led to the error.
        The exception must either be prevented, caught within proedure
        "TMC2F_FROUT_CALL" "(FORM)", or its possible occurrence must be declared in the
        RAISING clause of the procedure.
        To prevent the exception, note the following:
    sm21 log ;
    Transaction Canceled 00 671 ( LOAD_PROGRAM_NOT_FOUND 20081010102203saptest_TET_00 EYUCE 100
    Update terminated
    > Update key: F39796DD5421F1509233001E0BD601E0
    > Update module: MCE_STATISTICS_UPD_V2
    Run-time error "LOAD_PROGRAM_NOT_FOUND" occurred

    Please follow the oss note 800335
    V2 Update terminations in Purchasing transactions after upgrading or installing AFS 5.0 release.
    Other terms
    AFS, LIS, MIGO, ME22N, OLI3, S433, S431
    Reason and Prerequisites
    AFS Purchasing infostructure S431 is no longer used. S433 is the valid infostructure for the release AFS 5.0.
    Solution
    Please do the following.
    For customers upgrading to AFS 5.0 only:
    > Rebuild Infostructure S433.
    - Goto transaction: OLI3 (Statistical Set up of Infostructures)
    - Info structure to be compile: S433
    - Specify the 'Name of run'.
    - Execute.
    > Please also follow the instructions given below.
    For both Upgrade and Non-upgrade Customers:
    > Create the report 'ZDELS431'.
    - Transaction: SE38
    - Give Program name as ZDELS431.
    - Create (F5).
    - Title : 'Program to delete S431'.
    - Type  : 1 (Executable Program).
    - Status: T (Test Program).
    > Copy the program text from the note and paste in the program.
    > Save and activate the program.
    > Execute the report for all clients in Update mode.
      (Two check-boxes will appear: P_ALL_CL, P_UPDATE.
       Please check both of them).
    This report will delete all the references to infostructure S431.

  • Error publishing reports from BW

    Hi,
    I am facing some issues while publishing reports from BW system. I have taken care of all the settings mentioned in Integration Kit guide. We are using BOXI 3.1 SP3  OS:windows 2008 (64-bit)
    The error that we are getting is:
    "0000000001 An error occurred when retrieving the role metadata for YBW_BO_CONTENT_PUBLISHER. Returned with RFC code 18 and message: See RFC trace file or SAP system log for more details"
    I have enabled the trace also, still not able to find the root cause.
    Need help urgently. Thanks.
    Amit Tewatia

    Hi Startos,
    I have matched the auth. as per the admin guide, everything is fine with the role. I have checked the trace file logs, part of which is below:
    "Starting up callback server at 10.239.30.2 sapgw00 with prog-id SEGIDC8BBB5A3
    GetRfcHandle() returned with handle 0
    Connection cloning failed. Message: See RFC trace file or SAP system log for more details
    ERROR: .\job_defs.cpp 52: l_rfcDownloadRoleMdata failed with return code l_rcRfc = 18 Exception:
    Leaving job processor CPubJobGetRoleMetaData(YBW_BO_CONTENT_PUBLISHER)"
    No idea why it calling this IP. This is not the IP of our BW server. please suggest where to check for this.
    Regards,
    Amit

  • Discoverer report from OLAP

    Hi,
    We are trying to run a doscoverer OLAP PLUS report therough a URL. The help says that we need to use the workbook ID, but in the workbook property we cannot find identifier field. The URL we are forming is as shown. Please help
    http://itlinuxdevblade18.hq.emirates.com:7778/discoverer/plus?%20%20%20&us=S243191%20%20&pw=S243191%20%20&db=itlinuxdevblade18:1521:cvu10gd%20&lm=OLAP&wb=root\Users\S243191\A1

    As regards the Forms 6i.....
    Re: Calling a Disco Report from Forms
    Greetings....
    Sim

  • Calling report from form. Need PDF output

    I am calling a report from a form using RUN_PRODUCT. I need to display the form in PDF format. When the user clicks the button in the form to run the report, acrobat reader should open up and the report displayed there. Please help.
    Thanks

    Thanks for the response. The first part worked. I am able to get the output in PDF format. In the 2nd part where I want to open acrobat and display the output, I am having some trouble with the code. When I compile, it says
    win_api_environment.read_registry must be declared. Is there some package I need to attach?
    Also, in the After reports trigger, how do I pass vFile (I am assuming this is the PDF file name)?
    Thanks
    The first thing you'll want to do is pass parameters to the report IE DESTYPE, DESNAME and DESFORMAT where these could be FILE, 'c:\temp\report' and PDF.
    Then, you can try this piece of code I wrote (with some help from other people at Metalink and here) sometime back. Now, I call it from forms, but in your case, you'd have to run it in the after report trigger. Since with RUN_PRODUCT you don't know when the report is finished, if you did it from the form, it wouldn't work correctly.
    PROCEDURE OPEN_PDF(vFile IN VARCHAR2)
    IS
    vcServerApp varchar2(40);
    vcServerTag varchar2(600);
    vcCommand varchar2(2000);
    iArgPos pls_integer;
    dummy NUMBER;
    BEGIN
    -- 1 get the Server App for .PDF files
    vcServerApp := win_api_environment.read_registry('HKEY_LOCAL_MACHINE\SOFTWARE\CLASSES\.PDF','',true);
    -- 2 get the executable
    vcServerTag := 'HKEY_LOCAL_MACHINE\SOFTWARE\CLASSES\'||
    vcServerApp||'\SHELL\OPEN\COMMAND';
    vcCommand:= win_api_environment.read_registry(vcServerTag,'',true);
    -- 3 Sort out how to specify the Filename
    iArgPos:= instr(vcCommand,'%1');
    if iArgPos = 0 then --no substitution Var on the command line
    vcCommand := vcCommand||' '||vFile;
    else
    vcCommand := substr(vcCommand,1,(iArgPos-1))||
    vFile||substr(vcCommand,(iArgPos+2));
    end if;
    -- 4 Run using Winexec (or Host if preferred).
    win_api_shell.winexec(vcCommand);
    EXCEPTION
    when no_data_found then
    abortt('Acrobat Reader was not found! Please consult with your help desk to install it and try again.','N');
    END;
    Chad
    I am calling a report from a form using RUN_PRODUCT. I need to display the form in PDF format. When the user clicks the button in the form to run the report, acrobat reader should open up and the report displayed there. Please help.
    Thanks

  • Stop the report from firing until the user clicks the Go button?

    Hi All,
    Is there a way to stop the report from firing until the user clicks the Go button? At the moment it is populating when I open the dashboard page. I found something online that said i could use the Page Options>Save Current Settings> For Others.. but even though i am signed in as an administrator i only see a For Me.. option. Also, even after setting this option i would like to be able to hit the 'Go' button to run the report and have it uncollapse the section. Is this possible?
    Thanks

    Thanks for the replies,
    In my report i am trying to constrain the report to todays data only. However the only prompt i have is for another column. If i place a filter on the date column with Year=0000 it will not change with the prompt selection and so will never return any results. Is there any other way?
    It seems wasteful to fire a request to the database onload of the page. Is there an option to only fire a request what the prompts are entered? I will be using a stored proc which needs parameters to run the request so it would be good to be able to set the report to not run until it has parameters entered
    Thanks

  • Print a report from Application Express direct to a CUPS Printer

    Hi all, I'm new to this technology, is it possible to print a report from Application Express directly to a CUPS Printer? Can someone tell me in laymans terms how to do it? I find the terminology and documentation less than helpful.

    Jeremy,
    BI Publisher handles submitting reports directly to a CUPS printer. However, the APEX integration doesn't currently integrate with that portion of BI Publisher.
    Here's an options:
    Use the Java API of BI Publisher to build a custom Java program that would do this for you. Delivering to CUPS is part of the Java API.
    Bryan

  • Print Message Report from Mobile

    Hello...
    We need modify standard mobile infrastructure java code...
    We need print some report from Mobile Front-end.
    Is possible to print all MESSAGE data that we can see from front-end of mobile infrastructure 2.5 ???
    thank you very much
    Stefano

    I haven't really done much enhancements on MAM 2.5, but Im sure sami will let you know where to add the code, or you can review the MAM enhancement guide on the CD.
    In regards to printing the PIOS API is pretty simple. If you are using a laptop to print to a normal printer then you can just use the Win32 Drivers..(installed via driver addon from web sap console.)If you are using the handheld you will need to find the appropriate drivers.
    Here is some code I used in one of my applications:
                   <i>Connector conn = Connector.getInstance();
                   DriverInfo[] driverInfo = conn.listDrivers(ConnectionType.PRINTER);
                   PrinterParameters params = new PrinterParameters(driverInfo[0]);
                   params.setPrinterMode(PrinterParameters.GRAPHIC_MODE);
                   GraphicPrinter gp = (GraphicPrinter) conn.open(params);
                   File myImage = new File("c:
    smalllogo.bmp");
                   if (myImage.exists()) {
                        float x = 0;
                        float y = 50;
                        try {
                             String[] sFonts =
                                  gp.getFontConfigurationManager().listFontNames();
                             PrinterFont pf = gp.getFont(sFonts[0]);
                             gp.drawText(
                                  pf,
                                  25,
                                  25,
                                  "TO For Delivery # = "
                                       + dbAccess.getItemFieldValue(arrayItems[0], "VBELN"),
                                  GraphicPrinter.NO_ROTATION);
                             for (i = 0; i < arrayItems.length; i++) {
                                  gp.drawText(
                                       pf,
                                       25,
                                       y,
                                       "Delivery Item # = "
                                            + dbAccess.getItemFieldValue(
                                                 arrayItems<i>,
                                                 "POSNR"),
                                       GraphicPrinter.NO_ROTATION);
                                  y = y + 10;
                                  gp.drawText(
                                       pf,
                                       25,
                                       y,
                                       "Material # = "
                                            + dbAccess.getItemFieldValue(
                                                 arrayItems<i>,
                                                 "MATNR"),
                                       GraphicPrinter.NO_ROTATION);
                                  y = y + 10;
                                  gp.drawText(
                                       pf,
                                       25,
                                       y,
                                       "Quantity to Pick = "
                                            + dbAccess.getItemFieldValue(
                                                 arrayItems<i>,
                                                 "LFIMG"),
                                       GraphicPrinter.NO_ROTATION);
                                  y = y + 25;
                   gp.doPrint(1);
                   gp.close();
              } catch (Throwable tFile) {
                   tFile.printStackTrace();
              }<i>
    This should give you an idea, you should also read through the MDK documentation for the printer API (PIOS). Its quite easy to pick up and as long as you have the driver and connector installed it prints right away.(You could also use the Peripheral emulator in
    NWDS to test the code first)
    Hope this helps,
    Wael..
    Dont forget the rewards
    Message was edited by: wael aoudi

  • Error while opening a report from worskpace

    I have created a report in WebAnalysis (http://server:19000/WebAnalysis) using analytical connection.
    When I try to open the same report from http://server:45000/worskpace following error is given
    'getContent' is null or not an object. click ok
    Required application module analyzer.reportview is not configured. Please contact your administrator.click ok
    http://server:45000/WebAnalysis/conf/AnalyzerConfig.xml
    Please can anybody help me out in this regard.
    Thanks,
    -Shantanu

    Hi,
    You can't access workspace directly through that port if you want to use other functionality, you should workspace through http://<workspace machine>:19000/workspace/
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Urgent.....Error while running a jsp report from Jdeveloper

    Hi,
    I am getting following error while running a jsp report from Jdeveloper. I am using version 10.1.2.1.0. The same report is working fine when I am running it from report builder. ( Both these tools were installed using Oracle Developer Suite 10g version 10.1.2). I did search in oracle discussion forums and google, but I could not arrive at a resolution of error. Any help in resolving this issue would be grateful.
    Error details:
    Page url : http://<hostipaddress>:8988/Reports-reportproject-context-root/MyReport.jsp
    Reports Error Page
    Wed Oct 17 20:03:22 IST 2007
    javax.servlet.jsp.JspException: REP-51002: Bind to Reports Server myreportserver failed
    javax.servlet.jsp.JspException: REP-51002: Bind to Reports Server myreportserver failed
         at oracle.reports.jsp.ReportTag.doStartTag(ReportTag.java:464)
         at MyReport.jspService(MyReport.jsp:4)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:57)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:350)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
         at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
         at java.lang.Thread.run(Thread.java:534)
    Could anyone help me out in resolving this issue.
    Thanks
    Siva...

    Hi,
    I posted this message in jdeveloper forum yesterday, but there was no response. So I thought of posting it in this forum to check my luck.
    Thanks
    Siva...

  • Error while executing a report from Planning

    Hi,
    I've got this error message when I execute a report from Hyperion Planning (web) :
    "5200: Error executing query. [1106] Error : Class component property name invalid[DataType]"
    Can you help me please ?
    Thanks.
    Virgile.

    I am not sure about it. But i remember once running into a similar issue where i made some changes in the metadata or outline and few members were dropped from the hierarchy and it came up with this error at the time of running
    the report as my report was still trying to query the dropped members. But u said you have already checked and all your members are valid on the report. Is this happening with all the reports or just one. If its all the reports i would
    restart the BI+ reporting services and then try to run the reports!

  • Error while creating a report from personal files.

    Hi All,
    We are trying to insert a report from excel file( Env BO XIr3 Desktop intelligence)
    Poping up with error "Too many data to display"
    Is there any data limit or data size limit or no of rows limit.
    Thanks in advance...

    Hi Rachna,
    Can you try one thing can you restrict the values to less then 16000 to check the behavior.
    What is the excel version is it 2007 Excel.
    Are you  trying to use an excel sheet which have more then 256 columns 
    Regards
    Kultar

  • Microsoft excel error while exporting a FRS report from Planning to excel

    I have multiple screen shots of the issue.
    are getting issues when within citrix trying to run an FRS report from workspace into excel.
    first they get a windows login window looking for credentials of a User name and a Password.
    the first error:
    "Could not open 'http:SERVERNAME:19000/hr/hrget/modules/com/hyperion/reporting/web/office/HROfficeReport.jsp/FOLDERNAMEandFILENAME.xls?format=excel.20028viewAs=excel&instanceId=11165278&previewDone=true'.
    second error:
    Microsoft Excel cannot access the file 'http:SERVERNAME:19000/hr/hrget/modules/com/hyperion/reporting/web/office/HROfficeReport.jsp/FOLDERNAMEandFILENAME.xls?format=excel.20028viewAs=excel&instanceId=11165278&previewDone=true'. There are several possible reasons:
    The file name or path does not exist.
    The file is being used by another person
    The workbook you are trying to save has the same name as a currently open workbook.
    Third error:
    The file you are trying to open, 'FILENAME.xls', is in a different format than specified by the file extension. Verify that the file is not corrupted and is from a trusted source before opening the file do you want to open the file now?
    yes , no, or help
    I am trying to figure out if its a CITRIX issue? An EPM issue? or what
    We have Office 2010 32 bit with smart view and excel add-in.
    Does anybody know why this may occur? I have screen shots I just don't know how to post them.

    When you export a FR report to excel, yes, you will get a prompt for credentials, but as said in 11.1.2 HFR guide, you have to ignore that by clicking "Cancel" and then you will get a second warning pop-up saying "The file you are trying to open, 'FILENAME.xls', is in a different format ........"... Click on "Yes"... you should be able to see the report in excel....
    Both these are known issues in HFR export to excel and you can find them in oracle features guide. And they are not related to Citrix.
    As in Oracle HFR user guide "When exporting a Financial Reporting document to a Microsoft Office format (Excel, Word or PowerPoint), when using Microsoft Office 2007, you may receive the following warning: "The file your are trying to open <filename>, is in a different format than specified by the file extension. Verify that the file is not corrupted and is from a trusted source before opening the file. Do you want to open the file now?". This warning notifies users that, although the file has an Office extension ( ".xls", ".doc" or ".ppt"), the content of the file is different from the expected (native) Office format. Although Financial Reporting reports are generated in an MHTML format during export, this is not a security concern. Microsoft Office is just warning a user of a file format that is different than expected. Upon selecting “Yes” in the warning, the file will successfully open in Microsoft Office."
    Thanks,
    Siva

  • Running a report from a pl/sql procedure

    I'm trying to execute a report from a oracle procedure using UTL_HTTP.request and I keep getting a 'User-Defined Exception' error. Can anyone see what I'm doing wrong or have any other suggestions what might be wrong? Using Reports6i and Oracle 8.1.7. When I run the report directly from the browser to the printer it runs perfectly.
    create or replace procedure p_test
    v_ret varchar2(4000);
    v_url varchar2(2000);
    begin
    v_url:= 'http://webserver:80/dev60cgi/rwcgi60?server=Rep-server-name+report=C:/report_loation.RDF+DESTYPE=printer+Desname=printer_name+userid=userid/password@db';
    v_ret := UTL_HTTP.request(v_url);
    end p_test;

    Cheryl, try replacing the ":" in your URL with the "escaped" version of the colon character instead: "%3a". (Thus your URL would read
    "...report=C%3a/report_location...".) Also, be sure that any other spaces in the URL are passed as either "+" or "%20".
    UTL_HTTP.request is much more sensitive to reserved characters on the URL than most browsers are (especially IE).
    - Bill

  • Reports from SAP BPC NW 7.5

    Hi All,
    Our Landscape:
    SAP ECC EhP1
    SAP BW 7.10
    SAP BOBJ XI 3.1 (WebI/Crystal/Xcelsius)
    SAP BPC NW 7.5
    We are new to BPC. We would like to know where do we need to develope the reports on BPC data. Can some one help me on this. If some one have any best practices or options that where we can develope the reports, pls let me know
    Like we can do reporting directly on BPC with only couple of reports from BW/BOBJ or all reports from BW/BOBJ.
    Here we are planning to use BW as warehouse solution and BOBJ tools for reporitng on BW data.
    Thanks,
    Bala

    Hi Bala,
    BPC is a planning & a reporting tool. It can also be used for Consolidation. As mentioned in the previous reply, the data in BW has to be made available in BPC Application (cube) to be able to report it out.
    You might need to create transformation files and conversions files between your BW cubes and the BPC cubes to realise the data transfer to BPC application (cube). Note, BPC cubes are automatically generated when you create an application from the BPC front end.
    Please refer to some good introductory blogs available on SDN to get to know the BPC terminology and BW terms. Then BPC has an reporting tool in itself. You can create reporting using EVDRE for example which displays the data landed in BPC cubes. This typically will have actual data (loaded from BW), plan data (planned through Input Schedules or flat file data loads).
    Hope this give some brief idea.
    Thanks

Maybe you are looking for