Report from solman to r/3

Hi,
Is it possible to fetch the crm_dno_monitor standard report which is availble in solution manager to r/3 system...
Regards,
Thiru. R

well in case you want to transfer the data fetched from a report to XI then you can use ABAP proxies (i think this is what you were looking for)
Ref:
To est. connection - /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Client Proxy - /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
Server Proxy - /people/siva.maranani/blog/2005/04/03/abap-server-proxies

Similar Messages

Steps to configure BPM report from Solman 7.00 for productive system ECC6.0

Hi all,
Please given me the steps to configure Buisness process Monitoring reports from Solman 7.0 for productive system( ECC6.0, windows & database oracle 10.2),
I wanted to create the Reports of monitoring the buisness.
Regards,
Akash Basis consultant.

Thanks for replying Volker von Gloeden,
This thread is my first one in SDN & I am very glad that someone has given the answer ,
I will take a look for solution you have provided & will inform you.
Thanks again.

EWA report from SOLMAN not generating properly.

Hi expert,
EWA report from SOLMAN not generating properly. It's generating like Rating not Determined (Gray) - SAP EarlyWatch Alert.
Solman version: SAP EHP 1 for SAP Solution Manager 7.0
Thanks in advance. Any help appreciated.
Regards,
Debi pal

Hi,
Refer to SAP note: Note 762696 - Grey rating for Earlywatch Alert
Thanks
Anil

Daily System Health monitoring report from SOLMAN

Hi Experts,
I am working on a project where I need to triiger a consolidated system health report from sol man, much like early watch report.
Only thing is that it should be generated daily for each system.
Well That makes the expectation.
Progress so far :-
     a. Applied E2E120 for managed system ie Technical monitoring is working for that system.
Challenge :-
   a. Generating a consolidated report, with checklists for system logs, dumps, qrfc / trfc's. As Technical monitoring is giving these info separately.
   b. Options in technical monitoring are too many and not sure which can deliver what i am looking for.
          a. IT Performance reporting
          b. Service level reporting
          c. SDCCN Reporting.
          d. or automatic configure reporting.
   c. The report has to be generated periodically only once in a day. It should not be alert monitoring that an system alert triggers a mail and management is bombarded with too many mails.
Any valuable suggestion will be very helpful and will certainly be rewarded.
Thanks
Abhijeet

Hi Jhansi,
few things first, I have really liked your blogs and forum discussion on Sol Man. They have been really very helpful.
Now, after spending around 2-3 days on it, Closest bet is "IT Performance reporting". With this i am compromising with consolidated report. (Just hoping management agrees for it )
But here is the new challenge I am going through. It is the web templates to use for specific checklist.
I used below link.
http://help.sap.de/saphelp_sm71_sp05/helpdata/en/3f/ecbef23769488f806177717adee541/content.htm?frameset=/en/a3/074aa01bbe4662b99bc20ec5263cf8/frameset.htm&current_toc=/en/81/6f8fe54f854ef2bd412c8660f5ed6e/plain.htm&node_id=463
I need template for System logs, qrfc, trfc, PI messages etc. It is not present in the link provided. Even searched on SMP, it was not available. Can we manually create and use the web templates.
Also when i used such templates, I am getting following error message in the monitoring
Let me know your inputs.
Thanks
Abhijeet

Extracting Monitoring reports from J2EE system to SOLMAN

Hi,
I would like to monitor a J2EE system from Solution Manager system and obtain Some related reports from J2EE system to SOLMAN in order to analyze its performance.
please suggest me about the ideas to go about the same.
Your inputs will help me a lot.
Regards,
Kaushik

Hi,
To monitor JAVA system on Solution Manager you need to install Solution Manager Diagnostic or Sitescope or CA Wily Introscope for your java system and after that you can configure your Java monitoring on Solution Manager.
Please refer Note 1107033 for CCMS config for java.
V....

EWA Alert report in solman

Hello All,
Kindly help me to resolve this issue.
We have configured solution manager 7.o EHP1. For connecting to satellite system we have configured the trusted system configuration from solman to satellite system and also assigned logical component to satellite system.
We want to generate the early watch report in solman for the satellite system. We ran service preparation check and maintenance package. All are fine. The RFC *BACK is also working well in SM59.
Now in satellite system, in SDCCN we created the "refresh session " task. but this task is getting finished immediately and no data read session is visible in solman. We also made the solman BACK RFC as master for data read.
Regards,
Vineet

Hello,
I see Jansi already provided you the wiki page I wrote.
Another thing to check, ensure that the Installation Number of the managed system is the same Installation number that is entered in the SMSY declarations, because if the numbers differ, then the refesh session will not find a session for that installation, and it will complete with no obvious errors.
BAsically the refresh sessions task is kinda dumb. It either pulls the session numbers and creates EWA (or other session type) SDCCN tasks for each session it pulls from Solution Manager. But if any error occurs, it passes no further information, and seems to run, complete, but finds no sessions.
THe other thing I should add is if the session can't be opened in DSA, no sessions will be returned, the session doesn't need to result in a dump. You may just get a dialog box stating "opening the service session EAnnnnnnnnnnnn failed".
So that should pretty much cover the Red Flagged EWA report.
Regards,
Paul

Error when trying to extract data from Solman to BI 7

Hi,
We are trying to extract data from Solman 7 to BI 7. The following extractors have been activated on Solman since we want to be able to report CCMS ALERTS and System availability on Bi Portal.
Transaction SPRO -> SAP Reference IMG -> SAP Solution Manager -> Scenario-Specific Settings -> Operations -> BI Reporting
transaction: RSA5 (Installation of DataSource)
0SM_SMG_ROOT Oberster Knoten Solution Manage
0SM_SMG Solution Manager
0SM_DSWPBI_DB390
0SM_DSWPBI_DB400 DB400 Data
0SM_DSWPBI_DBADA Adabas Data
0SM_DSWPBI_DBDB2 DB2 Data
0SM_DSWPBI_DBINF Informix Data
0SM_DSWPBI_DBMSS SQL Server Data
0SM_DSWPBI_DBORA Oracle Data
0SM_DSWPBI_MODUL Module Data
0SM_DSWPBI_PERF Performance Data
0SM_DSWPBI_SERVER Server Data
0SM_DSWPBI_SYSDATA System Details Data
0SM_DSWPBI_SYSTEM System Data
Our current situation is that we have scheduled the jobs through Solution_manager > solution Reporting > BI Data collection. Yet no data has been collected and the jobs are getting cancelled.
Has anyone come accross this same situation before? Plus I have just found out that on SOLMAN_WORKCENTER under System Monitoring there is a reporting step named IT PERFORMANCE reporting that needs to be configured.
Please advice since this will be critical for our busines.

Hello,
I have collected the data from our systems successfully. I have implemented the steps lsited at http://help.sap.com/saphelp_sm70ehp1_sp26/helpdata/de/45/51fbdbd4941803e10000000a1553f7/frameset.htm and it works fine.
Regards
Andreas

Extract data from SolMan to MS Access with VB RFC

I am trying to create a database that allows me to extract data from SolMan directly from MS Access. The command I want to run is ZSPROJECT_GET_SOLAR_STATUS (I think this will do what I want it to). I am doing this in VB within Access and need to extract the data into a table for use with reports I have created. Currently I do this manually by running a solar_eval transaction and export to Excel, then import into Access. I would like this to be automatic as the users will not know how to do the manual extract.
Can anybody help me out?
Scott

I am an intern at the project with no SolMan or SAP training. We have a similar application that is web-based that was developed by someone using XML and a SOAP RFC, but since my application is in MS Access, I was hoping to do it through VB.
I don't know what version of SolMan it is, does 4.0 sound right?
I guess that I need to talk to someone from SAP on this project if I can find them to get this setup? I don't know if this is a generic transaction or not, but the one I use currently to extract the data is
solar_eval
so I'd like to automatically run this and extract the data using Access to put it into my table; rather than logging into the GUI, running the transaction, choosing the variant and layout, export to Excel, and then finally go into the database to import the data and run my reports.
Any thoughts on how I could do this besides what I'm trying to do which seems like it may be difficult?

How to Use Solution Manager to collect Status Reports from Consultants

Hi,
I am planning to use Solution Manager for collecting the weekly status reports from my consultants and maintain it as a repository . Please let me know the best way of doing this in SOLMAN. There should be mailing options too.
BR,
Raj

Hi Rajasan,
to be able to meet this requirement, you need to set up plan working load in admin tab for your resource, they need to update actual data based on the work completion, you will get status of work,
if you require email, you need to set-up scot, then develop a program with execution scheduling
please check and revert
Anil

Error publishing reports from BW

Hi,
I am facing some issues while publishing reports from BW system. I have taken care of all the settings mentioned in Integration Kit guide. We are using BOXI 3.1 SP3 OS:windows 2008 (64-bit)
The error that we are getting is:
"0000000001 An error occurred when retrieving the role metadata for YBW_BO_CONTENT_PUBLISHER. Returned with RFC code 18 and message: See RFC trace file or SAP system log for more details"
I have enabled the trace also, still not able to find the root cause.
Need help urgently. Thanks.
Amit Tewatia

Hi Startos,
I have matched the auth. as per the admin guide, everything is fine with the role. I have checked the trace file logs, part of which is below:
"Starting up callback server at 10.239.30.2 sapgw00 with prog-id SEGIDC8BBB5A3
GetRfcHandle() returned with handle 0
Connection cloning failed. Message: See RFC trace file or SAP system log for more details
ERROR: .\job_defs.cpp 52: l_rfcDownloadRoleMdata failed with return code l_rcRfc = 18 Exception:
Leaving job processor CPubJobGetRoleMetaData(YBW_BO_CONTENT_PUBLISHER)"
No idea why it calling this IP. This is not the IP of our BW server. please suggest where to check for this.
Regards,
Amit

Discoverer report from OLAP

Hi,
We are trying to run a doscoverer OLAP PLUS report therough a URL. The help says that we need to use the workbook ID, but in the workbook property we cannot find identifier field. The URL we are forming is as shown. Please help
http://itlinuxdevblade18.hq.emirates.com:7778/discoverer/plus?%20%20%20&us=S243191%20%20&pw=S243191%20%20&db=itlinuxdevblade18:1521:cvu10gd%20&lm=OLAP&wb=root\Users\S243191\A1

As regards the Forms 6i.....
Re: Calling a Disco Report from Forms
Greetings....
Sim

Calling report from form. Need PDF output

I am calling a report from a form using RUN_PRODUCT. I need to display the form in PDF format. When the user clicks the button in the form to run the report, acrobat reader should open up and the report displayed there. Please help.
Thanks

Thanks for the response. The first part worked. I am able to get the output in PDF format. In the 2nd part where I want to open acrobat and display the output, I am having some trouble with the code. When I compile, it says
win_api_environment.read_registry must be declared. Is there some package I need to attach?
Also, in the After reports trigger, how do I pass vFile (I am assuming this is the PDF file name)?
Thanks
The first thing you'll want to do is pass parameters to the report IE DESTYPE, DESNAME and DESFORMAT where these could be FILE, 'c:\temp\report' and PDF.
Then, you can try this piece of code I wrote (with some help from other people at Metalink and here) sometime back. Now, I call it from forms, but in your case, you'd have to run it in the after report trigger. Since with RUN_PRODUCT you don't know when the report is finished, if you did it from the form, it wouldn't work correctly.
PROCEDURE OPEN_PDF(vFile IN VARCHAR2)
IS
vcServerApp varchar2(40);
vcServerTag varchar2(600);
vcCommand varchar2(2000);
iArgPos pls_integer;
dummy NUMBER;
BEGIN
-- 1 get the Server App for .PDF files
vcServerApp := win_api_environment.read_registry('HKEY_LOCAL_MACHINE\SOFTWARE\CLASSES\.PDF','',true);
-- 2 get the executable
vcServerTag := 'HKEY_LOCAL_MACHINE\SOFTWARE\CLASSES\'||
vcServerApp||'\SHELL\OPEN\COMMAND';
vcCommand:= win_api_environment.read_registry(vcServerTag,'',true);
-- 3 Sort out how to specify the Filename
iArgPos:= instr(vcCommand,'%1');
if iArgPos = 0 then --no substitution Var on the command line
vcCommand := vcCommand||' '||vFile;
else
vcCommand := substr(vcCommand,1,(iArgPos-1))||
vFile||substr(vcCommand,(iArgPos+2));
end if;
-- 4 Run using Winexec (or Host if preferred).
win_api_shell.winexec(vcCommand);
EXCEPTION
when no_data_found then
abortt('Acrobat Reader was not found! Please consult with your help desk to install it and try again.','N');
END;
Chad
I am calling a report from a form using RUN_PRODUCT. I need to display the form in PDF format. When the user clicks the button in the form to run the report, acrobat reader should open up and the report displayed there. Please help.
Thanks

Stop the report from firing until the user clicks the Go button?

Hi All,
Is there a way to stop the report from firing until the user clicks the Go button? At the moment it is populating when I open the dashboard page. I found something online that said i could use the Page Options>Save Current Settings> For Others.. but even though i am signed in as an administrator i only see a For Me.. option. Also, even after setting this option i would like to be able to hit the 'Go' button to run the report and have it uncollapse the section. Is this possible?
Thanks

Thanks for the replies,
In my report i am trying to constrain the report to todays data only. However the only prompt i have is for another column. If i place a filter on the date column with Year=0000 it will not change with the prompt selection and so will never return any results. Is there any other way?
It seems wasteful to fire a request to the database onload of the page. Is there an option to only fire a request what the prompts are entered? I will be using a stored proc which needs parameters to run the request so it would be good to be able to set the report to not run until it has parameters entered
Thanks

Print a report from Application Express direct to a CUPS Printer

Hi all, I'm new to this technology, is it possible to print a report from Application Express directly to a CUPS Printer? Can someone tell me in laymans terms how to do it? I find the terminology and documentation less than helpful.

Jeremy,
BI Publisher handles submitting reports directly to a CUPS printer. However, the APEX integration doesn't currently integrate with that portion of BI Publisher.
Here's an options:
Use the Java API of BI Publisher to build a custom Java program that would do this for you. Delivering to CUPS is part of the Java API.
Bryan

Print Message Report from Mobile

Hello...
We need modify standard mobile infrastructure java code...
We need print some report from Mobile Front-end.
Is possible to print all MESSAGE data that we can see from front-end of mobile infrastructure 2.5 ???
thank you very much
Stefano

I haven't really done much enhancements on MAM 2.5, but Im sure sami will let you know where to add the code, or you can review the MAM enhancement guide on the CD.
In regards to printing the PIOS API is pretty simple. If you are using a laptop to print to a normal printer then you can just use the Win32 Drivers..(installed via driver addon from web sap console.)If you are using the handheld you will need to find the appropriate drivers.
Here is some code I used in one of my applications:
 Connector conn = Connector.getInstance();
 DriverInfo[] driverInfo = conn.listDrivers(ConnectionType.PRINTER);
 PrinterParameters params = new PrinterParameters(driverInfo[0]);
 params.setPrinterMode(PrinterParameters.GRAPHIC_MODE);
 GraphicPrinter gp = (GraphicPrinter) conn.open(params);
 File myImage = new File("c:
smalllogo.bmp");
 if (myImage.exists()) {
 float x = 0;
 float y = 50;
 try {
 String[] sFonts =
 gp.getFontConfigurationManager().listFontNames();
 PrinterFont pf = gp.getFont(sFonts[0]);
 gp.drawText(
 pf,
 25,
 25,
 "TO For Delivery # = "
 + dbAccess.getItemFieldValue(arrayItems[0], "VBELN"),
 GraphicPrinter.NO_ROTATION);
 for (i = 0; i < arrayItems.length; i++) {
 gp.drawText(
 pf,
 25,
 y,
 "Delivery Item # = "
 + dbAccess.getItemFieldValue(
 arrayItems,
 "POSNR"),
 GraphicPrinter.NO_ROTATION);
 y = y + 10;
 gp.drawText(
 pf,
 25,
 y,
 "Material # = "
 + dbAccess.getItemFieldValue(
 arrayItems,
 "MATNR"),
 GraphicPrinter.NO_ROTATION);
 y = y + 10;
 gp.drawText(
 pf,
 25,
 y,
 "Quantity to Pick = "
 + dbAccess.getItemFieldValue(
 arrayItems,
 "LFIMG"),
 GraphicPrinter.NO_ROTATION);
 y = y + 25;
 gp.doPrint(1);
 gp.close();
 } catch (Throwable tFile) {
 tFile.printStackTrace();
 }
This should give you an idea, you should also read through the MDK documentation for the printer API (PIOS). Its quite easy to pick up and as long as you have the driver and connector installed it prints right away.(You could also use the Peripheral emulator in
NWDS to test the code first)
Hope this helps,
Wael..
Dont forget the rewards
Message was edited by: wael aoudi

Report from solman to r/3

Similar Messages

Maybe you are looking for