Report Generation Error Code=1 applying patch 1471898

When apply the file g1471898 the adpatch was unable to generate reports. The message is ERROR [Code=1] generating report ....

Thats not much to go on.
You should probably take this up with Oracle Support.
But surely there is more in the logs than just that.
You dont have any 'ld: fatal: Symbol referencing errors..' or
something along those lines?
If you cant sort out the issue from your log files, then
you might want to recompile your apps schema and try the g-driver
again. Before contacting Support.

Similar Messages

  • LabVIEW6i Report Generation ERROR

    I have LabVIEW6i with LabVIEW 6.0 Run Time Engine and LabVIEW 6.0.2 patch updated with LabVIEW 6.0.2 Run Time Engine, at my development environment. I have read all the necessary related documents on the NI website, but did not help for the problem.
    I run an example from examples section of Report Generation vi's.
    I run the example "Sample Test Report.vi" and get the following error:
    1)-->Error -2147352567 occurred at The margins are invalid.. in Print Report.vi->Sample Test Report.vi.
    I open the Print Report.vi to check for the margins settings, I dont find any, and when I run the "Print Report.vi", I get the the following error:
    2)-->Error 1 occurred at "Generate Report Get Data to Modify.vi".
    Possible r
    easons:
    Object 0x000000 is not valid.
    I tried to debug the Print Report.vi, then I find the 2nd error is from "Generate Report Get Data to Modify.vi".
    I dont find any possibility to modify or change the margins. Or what necessary modifications I have to make to what *.vi, and excute the required *.vi's.
    Reply awaited.
    Thanks in advance.
    Sudhir N.

    I don't use the Report Generation functions much but I can say that there is a Set Report Margins.vi under the Report Generation>Report Layout palette. It is not included in Sample Test Report.vi example but you can add it. Probably the reason you got the error when running Print Report.vi is that you didn't run the New Report.vi first in order to create a reference.

  • Smartform report generation error

    Hi,
    I have a problem with a report calling a smartform. The report works perfectly on the 1 system but on the other system there is a generation error. I found that the problem lies with the following declaration:
    data: otf_info type SSFCRESCL. 
    I compared the structures on the different systems and they are identical. The only difference is the Support Package levels. The error occurs on the system with the higher support package - SAPKB64015 (basis and aba) whereas the other system is still at level 12 (SAPKB64012).
    Any ideas what is causing the generation error and what could be done to fix it?
    Regards
    Liza-Marie

    Hi ,
    I think there may be some errors in function group errors.
    Try the following :
    T/Code : SMARTFORMSEnter the name of the form> Test--> This will leads to function module --> Utilities(Menubar)-=-> Repair function group --> Repair.
    After repairing the function group --> Save and Activate.
    Then transport the Smartform to other system .
    Regards,
    Lanka

  • Report Generation error -41007

    I have installed Report Generation toolkit in evaluation mode.
    But running the examples always show error -41007 .
    How to solve it ?

    see here
    It seems you have not installed properly. Try re-installing. Post back.
    Mathan

  • Excel report generation error

    Hi,
    Does anyone have experienced (and solved) this behaviour?
    I've been using the report generation toolkit to build word report without
    problem. I've also solved a lot of problems in the excel part of the toolkit
    (e.g. building graphs with >20000 points). It finally works in development
    environment.
    Now when I install the executable (, with the installer) the word reports
    still work, but the excel report don't. The executable does run on a
    different system, but the excel versions are the same (both Excel 2000).
    I have copied the excel library in the data directory of the executable.
    The following error is generated:
    -2147319784
    Old format or invalid type library
    Excel_Open.vi
    This is the first report generation vi that is called. I us
    e it to open a
    template.
    Any help is appreciated.
    Wiebe.

    Hi,
    Surfing the internet, I found this comment:
    *Start quote*
    Sometimes you'll find that a parameter is required that isn't mentioned
    anywhere in the application's documentation. This happens when you need to
    specify system information: the chief example of this is the lcid, which is
    a locale identifier, and which pops up all over the place in Excel. The good
    news is that there is a constant in the Windows unit which provides you with
    the correct value, LOCALE_USER_DEFAULT:
    var
    lcid: integer;
    begin
    lcid := LOCALE_USER_DEFAULT;
    Excel.Visible[lcid] := True;
    There's also a function, GetUserDefaultLCID, but using that value can cause
    an error, complaining about an 'old format or invalid type library' on some
    setups. Using LOCALE_USER_DEFAULT for the
    LCID value should fix that.
    *End quote*
    Could this be the problem?
    Regards,
    Wiebe.
    "Wiebe@AIR" wrote in message
    news:3e79a3aa$0$140$[email protected]..
    > Hi,
    >
    > Does anyone have experienced (and solved) this behaviour?
    >
    > I've been using the report generation toolkit to build word report without
    > problem. I've also solved a lot of problems in the excel part of the
    toolkit
    > (e.g. building graphs with >20000 points). It finally works in development
    > environment.
    >
    > Now when I install the executable (, with the installer) the word reports
    > still work, but the excel report don't. The executable does run on a
    > different system, but the excel versions are the same (both Excel 2000).
    >
    > I have copied the excel library in the data directory of the executable.
    >
    > The following error is generated:
    >
    > -2147319784
    > Old format or invalid type library
    > Excel_Open.vi
    >
    > This is the first report generation vi that is called. I use it to open a
    > temp
    late.
    >
    > Any help is appreciated.
    >
    > Wiebe.
    >
    >

  • Failed to Open FR report With Error code 500 - 'unable to process request'

    I am running a load test against PBCS service. The service is load-balanced with 2 managed servers : EPMServer0 and EPMServer1
    When I put the loads with 60 VUs -- all visiting FR reports, the service runs without error. But when the VU# increased to 90, it began to respond with Error code 500  - 'unable to process request'.
    I tried to correlate the FRLogging logs to the errors, and found during the time those error happens, there are logs like this:
    >>>>>>>>>>>>>>>>>>>>>>>>>>
    [2013-09-27T05:21:29.325+00:00] [EPMServer0] [WARNING] [00365] [oracle.EPMFR.core] [tid: [ACTIVE].ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: sysname50134114.PerfUser0439] [ecid: 004tpQ^VFHT7m3RLIYDCif0007a30002bD,0:2:1:1] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_CLASS: com.hyperion.reporting.connection.UserConnection] [SRC_METHOD: openConnection] User authentication information is invalid. Unable to connect to datasource.[[
    com.hyperion.reporting.util.HyperionReportException: Error connecting to database connection Vision:Plan1: Failed to sync with user provisioning.com.hyperion.planning.HspRuntimeException
            at com.hyperion.reporting.connection.UserConnection.openConnection(Unknown Source)
            at com.hyperion.reporting.connection.UserConnection.openConnection(Unknown Source)
            at com.hyperion.reporting.connection.UserConnection.<init>(Unknown Source)
            at com.hyperion.reporting.connection.ConnectionManager.getConnection(Unknown Source)
            at com.hyperion.reporting.connection.ConnectionManager.getCube(Unknown Source)
            at com.hyperion.reporting.connection.ConnectionManager.getCube(Unknown Source)
            at com.hyperion.reporting.webviewer.WebDynamicReport.validateDatasources(Unknown Source)
        at jsp_servlet._modules._com._hyperion._reporting._web._reportviewer.__hrhtmlreport._jspService(__hrhtmlreport.java:1999)
            at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
            at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
            at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
            at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
            at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at com.hyperion.reporting.webviewer.HRSecurePagesFilter.needAuthentication(Unknown Source)
            at com.hyperion.reporting.webviewer.HRSecurePagesFilter.doFilter(Unknown Source)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at com.hyperion.reporting.webviewer.FRClusterHelper.doFilter(Unknown Source)
    >>>>>>>>>>>>>>>>>>>>>>>>>
    It looks like the servlet failed to open the datasource connection while handling the FR requests. But there are several data sources. My questions are:
    1) Which datasource is corresponding to the issue? Is it EPMSystemRegistry?
    2) What is the recommended configuration for the connection pool max capacity setting? -- current setting for EPMSystemRegistry is 30
    3) Whether it could be a connection leak problem as only 90 concurrent end user is visiting and it failed to connect?
    Thanks,
    Ellick Lu
    Type
    JNDI Name
    Targets
    aif_datasource
    Generic
    jdbc/aif_datasource
    EPMServer
    calc_datasource
    Generic
    jdbc/calc_datasource
    EPMServer
    EPMSystemRegistry
    Generic
    jdbc/EPMSystemRegistry
    EPMServer
    odiMasterRepository
    Generic
    jdbc/odiMasterRepository
    EPMServer
    planning_datasource
    Generic
    jdbc/planning_datasource
    EPMServer
    raframework_datasource
    Generic
    jdbc/raframework_datasource
    EPMServer

    It is checking for Database connection in Workspace. Check Editing Database Connections
    Can those users login to Planning? Do they have correct security setup (I guess not)
    Regards
    Celvin
    http://www.orahyplabs.com

  • Oracle Reports 10g Error Codes Details

    Hi,
    I would like to know which documentation will give me the details for the description and category (Warning/Fatal Error/User Error) for all the possible error codes that can be reported by Oracle 10g while the excution/scheduling of reports.
    The error code reported by Oracle 10g usually start with "REP-<error code>". I would like to have a list of all these REP codes and their details like description,category,severity,action to be taken etc.
    Pls help.
    regards,
    Santa

    Hello,
    All the error messages are documented in the Reports Builder online help.
    Regards

  • Report server, error code 186

    I installed 9ias(http server, forms &report server , oem server) on windows 2000, but the report server don't startup, error code 186. can you tell me how to resolve the problem.

    Hi Qiang,
    Please check http://metalink.oracle.com/metalink/plsql/ml2_documents.showFrameDocument?p_database_id=NOT&p_id=1047650.6 for possible solutions for this error.
    Thanks,
    Erik

  • Reporting Service Error Code 7403, on SCCM 2012 R2 with SQL 2012 SP1 CU6

    Dear All,
    I am facing issue to install Reporting Services Point on SCCM 2012 R2 with SQL 2012 SP1 CU6. getting error messages id 7403. please let me know if SQL 2012 SP1 CU6 is supported with SCCM 2012 R2 or not & if you have any solution on it.
    Error Message: The report server service is not running on Reporting Service Point server "SCCM2012"; start the service to enable reporting.

    I am getting below error msg when trying to browse both sites
    1) For Reports
    The report server cannot decrypt the
    symmetric key that is used to access sensitive or encrypted data in a report
    server database. You must either restore a backup key or delete all encrypted
    content. (rsReportServerDisabled)
    Get Online Help
    Keyset does not exist (Exception from
    HRESULT:
    0x80090016)
    2) For Reportserver
    Reporting Services Error
    The report server cannot decrypt the symmetric key that is used to access
    sensitive or encrypted data in a report server database. You must either restore
    a backup key or delete all encrypted content. (rsReportServerDisabled)
    Get Online Help
    Keyset does not exist (Exception from HRESULT: 0x80090016)
    SQL Server Reporting Services

  • Report generation error

    Hi,
    I'v created a query by Query Designer. On execution of the query on web the following error message is represented : "The query could not be generated without errors."
    The message details :
         "Program RSR_BAD_CODING for the query could not be generated without errors.
         The generated report was saved under the name RSR_BAD_CODING and must be analyzed.
         Please edit program RSR_BAD_CODING and carry out a syntax check there ('Check' key) to ..."
    Where I can found this program for checking syntax?
    Please help...
    many thanks in advance,
    Fiodar.

    you can see the code for this using transaction se38 and entering  the name there.
    However this is a SAP delivered program and you should not be making changes to it.
    Have a look on OSS there are 34 notes related to this program and issues with it.
    hope it helps
    alan

  • Crystal Report generation error

    Hi,
    I m using VS 2008 for development web application on local machine. One of my page is being used to display crystal reports through report document as usual.
    I deployed my application on web server windows 2008 R2 and I have also properly installed CRRedist2008_x64.msi & CRRedist2008_x86.msi on web server
    But When I open this page on browser I always get en error on line Declaring reportdocument object Like
    Retrieving the COM class factory for component with CLSID {5FF57840-5172-4482-9CA3-541C7878AE0F} failed due to the following error: 80070005 Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)).
        Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. 
      Exception Details: System.UnauthorizedAccessException: Retrieving the COM class factory for component with CLSID {5FF57840-5172-4482-9CA3-541C7878AE0F} failed due to the following error: 80070005 Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)).
    ASP.NET is not authorized to access the requested resource. Consider granting access rights to the resource to the ASP.NET request identity. ASP.NET has a base process identity (typically {MACHINE}\ASPNET on IIS 5 or Network Service on IIS 6 and IIS 7, and the configured application pool identity on IIS 7.5) that is used if the application is not impersonating. If the application is impersonating via <identity impersonate="true"/>, the identity will be the anonymous user (typically IUSR_MACHINENAME) or the authenticated request user.
    To grant ASP.NET access to a file, right-click the file in File Explorer, choose "Properties" and select the Security tab. Click "Add" to add the appropriate user or group. Highlight the ASP.NET account, and check the boxes for the desired access.
      Source Error:
    Line 44: Line 45: Dim rpt = New ReportDocument()
    Line 46:         rpt.Load(Server.MapPath("../Reports/CrRcpt.rpt"))
    Please help me to work on crystal report in my project:
    Thanks

    You have to be careful on the files you deploy. There is Crystal Reports 2008 (v. 12.x) and Crystal Reports Basic for Visual Studio 2008 (v. 10.5).
    If you are referencing CR assemblies of version 12.x, then you have to use the runtime files from here:
    MSM
    https://share.sap.com/a:328ro3/MyAttachments/53ecd0f0-09d3-4633-ada3-eeb7639fcd37/
    MSI
    https://share.sap.com/a:328ro3/MyAttachments/b7b145e0-eab2-46d0-bab1-e072d4f2af35/
    Note that CR 2008 (v. 12.x) does  not have 64 bit runtime.
    If you referenced CR assemblies of version 10.5, then you need to use the runtime files from here:
    Crystal Reports for VS 2005 and VS 2008 Updates & Runtime Downloads
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter
    https://twitter.com/SAPCRNetSup

  • Error trying to apply patch 11.1.1.5.3

    I am trying to apply IDM patch 11.1.1.5.3 to a fresh install of IDM. I have IDM running on an Oracle Linux 5 server along with Weblogic and SOA. The database is hosted on a second server. The base IDM install works fine.
    I am trying to patch to 11.1.1.5.3 and running in to an error saying...
    Patching component oracle.oim.server, 11.1.1.5.0...
    [ Error during Update inventory for apply Phase]. Detail: OPatch failed: ApplySession failed in system modification phase... 'ApplySession::apply failed: Current access level does not allow writing to the inventory'
    I am installing the patch with the same oracle user used to install the base product.
    Any ideas on what I need to do?
    Thanks.

    Nevermind. I downloaded the newest OPatch. I used the OPatch that was in the /Oracle_IDM1 directory and the patch succeeded.

  • Icons for the Reports missing in Workspace after applying patches

    Hello Gurus,
    I have installed 11.1.2.2 on one of my VM's and then applied the 11.1.2.2.300 patch on it.
    I have followed the Read Me for all the patches before applying them.
    After applying the patches however the icons for the Reports in workspace
    [IMAGE ON THE FOLLOWING LINK]
    http://i45.tinypic.com/29f6mc0.png
    I have reconfigured web server at the end but that did not help. Any help will be highly appreciated.
    Thanks
    HyperionEPM.

    Hello Nick,
    Yes all the components show green and I can access the reports without any issues. Its just the icon that does not show up.
    I will check the logs you have mentioned to see if there are any exceptions in them.
    But the issues started up after applying the patches for 11.1.2.2.
    I have checked the location path mentioned in Weblogic.xml in raframework.war file and the path points to the correct folder location where the folders mt and mt_thumbnails are located.
    Is the any other way out?
    Should I delete the contents inside the tmp folder located in RAFramework0
    or
    Can reconfigurin Reporting and Analysis framework services help in resolving the issue?
    Please let me know.
    Thanks.
    hyperionEPM

  • Summary Network Report Generation Error

    I am running SBS 2011 and have recently stopped getting the Network Summary Reports. When I go into the log I see the following error:
    2014-05-12T03:15:00.245868 : ***************** Starting GenerateMonitoringReport task... *****************
    2014-05-12T03:15:00.246868 : Generating Summary Network Report...
    System.NullReferenceException: Object reference not set to an instance of an object.
       at Microsoft.WindowsServerSolutions.SystemHealth.Monitoring.FirewallInformation.GetFirewallStatusFromMonitoringStore(String computerName)
       at Microsoft.WindowsServerSolutions.SystemHealth.Monitoring.ReportGenerator.GenerateSecuritySectionSecurityCenterPart(ReportSection section)
       at Microsoft.WindowsServerSolutions.SystemHealth.Monitoring.ReportGenerator.GenerateSecuritySection()
       at Microsoft.WindowsServerSolutions.SystemHealth.Monitoring.ReportGenerator.GenerateReport(ReportConfiguration config)
       at Microsoft.WindowsServerSolutions.SystemHealth.Monitoring.GenerateReportTask.Run()
       at Microsoft.WindowsServerSolutions.SystemHealth.Monitoring.SBSTask.StartTheTaskStub()
    This error happens every time the report is generated. Any help resolving this would be much appreciated.

    Hi Rory Christian,
    Would you please let me confirm whether it’s SBS 2011 Essentials or SBS 2011 Standard?
    If it’s SBS 2011 Essentials, and you have installed Update Rollup 2. Please use following Hotfix and check
    if help you to solve this issue.
    You receive the warning "Computer Monitoring Error"
    in Windows Small Business Server 2011 Essentials after you install Update Rollup 2
    If this issue still persists or it’s SBS 2011 Standard, please run
    SBS BPA and fix all that it can find. Then monitor the result. Meanwhile, please open Event Viewer and check if you can find more clues.
    If any update, please feel free to let me know.
    Hope this helps.
    Best regards,
    Justin Gu

  • CF Report generation error

    Hello,
    We have a report that is working on the development and the
    production server. I just downloaded the Report Builder version
    7.0.1
    When I change the report (move a filed from one pixel left)
    and save it, the server returns an error:
    The report template D:\...\IRC_BBS_Submission.cfr appears to
    be malformed or contain errors. The error that was encountered was:
    Invalid CFML construct found on line 135 at column 236.ColdFusion
    was looking at the following text:
    The CFML compiler was processing:
    * An expression that began on line 135, column 226.
    Your expression might be missing an ending "#" (it might
    look like #expr ).
    * the tag attribute "yaxistitle", on line 135, column 214.
    * a cfchart tag beginning on line 135, column 18.
    * a cfchart tag beginning on line 135, column 18
    I am using CFMX 7.1 on Windows 2003, and have the report
    builder running on this system too.
    Thanks for your help
    Eric

    Hello,
    I found the problem.
    We are using an external query (called via CFModule) and one
    of the field name had changed.
    So the error was due to the fact the CFREPORT was not able to
    find the field on the query.

Maybe you are looking for