Report generation fails with below error
Hi Friends,
This is an extarct from "ccat /var/opt/SUNWsymon/PRM/log/prm.log"
Report generation fails for individual host but succeeds for all hosts.
prmlog September 13, 2010 12:52:14 PM Thread-287: Begin loading files
prmlog September 13, 2010 12:53:51 PM HandlerThread-0: Got trap: 2
prmlog September 13, 2010 12:53:51 PM HandlerThread-2: Got trap: 2
prmlog September 13, 2010 12:54:51 PM HandlerThread-1: Got trap: 2
prmlog September 13, 2010 12:54:51 PM HandlerThread-2: Got trap: 2
prmlog September 13, 2010 12:56:01 PM HandlerThread-0: Got trap: 2
prmlog September 13, 2010 12:58:51 PM HandlerThread-0: Got trap: 2
prmlog September 13, 2010 12:58:51 PM HandlerThread-2: Got trap: 2
prmlog September 13, 2010 12:59:51 PM HandlerThread-1: Got trap: 2
prmlog September 13, 2010 12:59:51 PM HandlerThread-2: Got trap: 2
prmlog September 13, 2010 1:00:00 PM Parallel:0: Call CrScheduledRequestBroker.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Call CrScheduledRequestBroker.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Call CrScheduledRequestBroker.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Call CrScheduledRequestBroker.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Call CrScheduledRequestBroker.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Database Error occurs!
prmlog September 13, 2010 1:00:00 PM Parallel:0: ERROR: relation "detail_temp_host" does not exist
prmlog September 13, 2010 1:00:00 PM Parallel:0: SchedOP: Exception: scp-2: Report request generation failed.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Call CrScheduledRequestBroker.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Database Error occurs!
prmlog September 13, 2010 1:00:00 PM Parallel:0: ERROR: relation "detail_temp_host" does not exist
prmlog September 13, 2010 1:00:00 PM Parallel:0: SchedOP: Exception: creature-t1000-08: Report request generation failed.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Database Error occurs!
prmlog September 13, 2010 1:00:00 PM Parallel:0: ERROR: relation "detail_temp_host" does not exist
prmlog September 13, 2010 1:00:00 PM Parallel:0: SchedOP: Exception: sdp-1-region2: Report request generation failed.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Database Error occurs!
prmlog September 13, 2010 1:00:00 PM Parallel:0: ERROR: relation "detail_temp_host" does not exist
prmlog September 13, 2010 1:00:00 PM Parallel:0: SchedOP: Exception: psp-1-region2: Report request generation failed.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Database Error occurs!
prmlog September 13, 2010 1:00:00 PM Parallel:0: ERROR: relation "detail_temp_host" does not exist
prmlog September 13, 2010 1:00:00 PM Parallel:0: SchedOP: Exception: shissun1: Report request generation failed.
prmlog September 13, 2010 1:00:05 PM Thread-294: Report successfully posted to web server.
prmlog September 13, 2010 1:01:01 PM HandlerThread-0: Got trap: 2
prmlog September 13, 2010 1:03:54 PM HandlerThread-0: Got trap: 2
In /tmp directory I could see database logs directory (/tmp/SunMCDBLogFiles)
Below is an extarct from "db-start-sql.log"
ERROR: table "summ_temp_events" does not exist
LOG: autovacuum: processing database "postgres"
LOG: autovacuum: processing database "sunmc"
LOG: autovacuum: processing database "postgres"
LOG: autovacuum: processing database "sunmc"
LOG: autovacuum: processing database "postgres"
LOG: autovacuum: processing database "sunmc"
LOG: autovacuum: processing database "postgres"
LOG: autovacuum: processing database "sunmc"
LOG: autovacuum: processing database "postgres"
LOG: autovacuum: processing database "sunmc"
LOG: autovacuum: processing database "postgres"
LOG: autovacuum: processing database "sunmc"
LOG: autovacuum: processing database "postgres"
LOG: autovacuum: processing database "sunmc"
WARNING: there is already a transaction in progress
ERROR: relation "detail_temp_host" does not exist
CONTEXT: SQL statement "INSERT INTO detail_temp_host (host_id) VALUES (21)"
PL/pgSQL function "get_alarm_data_ids" line 203 at execute statement
PL/pgSQL function "sp_get_nonperf_summary_data" line 92 at assignment
WARNING: there is already a transaction in progress
WARNING: there is already a transaction in progress
ERROR: table "summ_temp_events" does not exist
ERROR: relation "detail_temp_host" does not exist
CONTEXT: SQL statement "INSERT INTO detail_temp_host (host_id) VALUES (26)"
PL/pgSQL function "get_alarm_data_ids" line 203 at execute statement
PL/pgSQL function "sp_get_nonperf_summary_data" line 92 at assignment
ERROR: relation "detail_temp_host" does not exist
CONTEXT: SQL statement "INSERT INTO detail_temp_host (host_id) VALUES (25)"
PL/pgSQL function "get_alarm_data_ids" line 203 at execute statement
PL/pgSQL function "sp_get_nonperf_summary_data" line 92 at assignment
WARNING: there is already a transaction in progress
ERROR: table "summ_temp_events" does not exist
WARNING: there is already a transaction in progress
ERROR: table "summ_temp_events" does not exist
ERROR: relation "detail_temp_host" does not exist
CONTEXT: SQL statement "INSERT INTO detail_temp_host (host_id) VALUES (42)"
PL/pgSQL function "get_alarm_data_ids" line 203 at execute statement
PL/pgSQL function "sp_get_nonperf_summary_data" line 92 at assignment
ERROR: relation "detail_temp_host" does not exist
CONTEXT: SQL statement "INSERT INTO detail_temp_host (host_id) VALUES (1)"
PL/pgSQL function "get_alarm_data_ids" line 203 at execute statement
Kindly suggest me.. This SUNMC is doing more than killing.
Thanks
Srini
I just received instructions from the TMG software company to uninstall and install the PDF driver they use. This fixed the problem. Apparently upgrading to v7.01 damages the driver but reinstalling it corrects the problem.
Thanks for the advice.
Mike
Similar Messages
-
Reports Service Fails with 186 error after Disocverer4i Admin Install
DB = 8.1.7
9iAS 1.0.2.1
Everything was working fine until the install of Disco4i Admin. I've performed a TNSPING80.EXE myserver & verified the TNSNames.ora configuration. Everything looks ok.Verify the entry in the tnsnames.ora for the Reports Server. The string
should look something like this:
Rep60,Rep60.world=(ADDRESS=(PROTOCOL=tcp)(HOST=<serverdnsname>)(PORT=1949))
Here is a cut from Doc ID 122038.1 on Metalink:
PROBLEM DESCRIPTION:
====================
After installing IAS Enterprise Edition, you attempt to start the Reports
Server Service (see below) and get the error:
REP-0186 - Daemon failed to listen to port.
For Windows NT:
Start-->Settings-->Control Panel-->Services-->Start Oracle Reports Server.
Get REP-186 error.
For UNIX:
Run the following Script:
$ORACLE_HOME/developer6i/reports60_server start.
SOLUTION DESCRIPTION:
=====================
WINDOWS NT 4.0 Server:
The primary cause for this error is that the Reports Server Service cannot
find a valid entry in the tnsnames.ora file. When the MTS starts, it tries
to read the entry in the $ORACLE_HOME\net80\admin\tnsnames.ora file. There
may be multiple files called tnsnames.ora on the machine. The following hint
may help in setting the default location for this file on the Windows NT
platform:
1. Click Start-->Run and type in REGEDIT; press enter; click OK.
2. Navigate to HKEY_LOCAL_MACHINE/SOFTWARE/ORACLE folder.
3. With this folder open, right-click in the right-hand pane and select New-->
String.
4. Enter "TNS_ADMIN" (w/o the quotes) for the new string.
5. Double-click on the new string, and enter the <drive>:\<path> to where your
centralized tnsnames.ora file is stored for string's value. This setting to
the registry will define a common TNS_ADMIN directory, allowing for a
central file to be managed.
6. Verify the entry in the tnsnames.ora for the Reports Server. The string
should look something like this:
Rep60,Rep60.world=(ADDRESS=(PROTOCOL=tcp)(HOST=<serverdnsname>)(PORT=1949))
Where <serverdnsname> is the name of the DNS name of the server
(the server's IP address may also be used instead. "World"
is the name of the default domain in the sqlnet.ora file.
7. Navigate to Start-->Settings-->Control Panel-->Services, find the Oracle
Reports Server [<RepServerName>] and start the service.
a) If the Service still fails to start, ensure that there is a printer
(local or network) installed, and in the Control Panel-->Services, click
the Oracle Reports Server [<RepServerName>], and click the Startup
button.
b) Under the "Log on As" section, select "This Account", then click the
ellipsis (...) button. In the dialogue box that comes up, select a user
that has access to the system's printer, and type in the user's password,
(do this even if the asterisks (*) appear), and click OK. Legacy
versions required a printer driver be installed on the Server in order
to format document output, even when creating cached documents for the
web.
c) Restart the Reports Server Service.
UNIX:
The following examples assume that IAS is installed in:
/u01/app/oracle/product/ias
and the $ORACLE_HOME is defined as the same.
1. Edit the $ORACLE_HOME/developer6i/reports60_server script file, noting the
following (example) settings:
csh:
setenv TNS_ADMIN $ORACLE_HOME/network/admin
bsh/ksh:
export TNS_ADMIN=$ORACLE_HOME/network/admin
2. Define a printer per NOTE:74872.1 and set the PRINTER environment to match:
csh:
setenv PRINTER <queuename>
bsh/ksh:
export PRINTER=<queuename>
3. Verify the entry in the tnsnames.ora for the Reports Server. The string
should look something like this:
Rep60,Rep60.world=(ADDRESS=(PROTOCOL=tcp)(HOST=<serverdnsname>)(PORT=1949))
Where <serverdnsname> is the name of the DNS name of the server
(the server's IP address may also be used instead). "World" is
the name of default domain in the sqlnet.ora file.
4. Now start the $ORACLE_HOME/developer6i/reports60_server script file.
EXPLANATION:
============
The IAS installation creates a TN S_ADMIN in the $ORACLE_HOME/developer6i
directory, but the Reports Server is not able to find it, due to the defaults
setup by the installer.
REFERENCES:
===========
Bug:1327922, SERVER SPECIFIC ERROR 186 STARTING REPORTS SERVER
Bug:1092182, REPORTS SERVER CAN NOT LAUNCH WITH THE ERROR 186
Note:74872.1, How to Configure Report Server 6.0 and Cartridge on Unix
Oracle Information Navigator (IAS Online Documents CD),
article:<CDROMDRIVE>:\doc\forms.6i\a83592\pbr_case.htm ,
"Configuring the OracleReports Server on Windows NT and UNIX
null -
Reports Service failes with 186 error after Disco4i Admin install.
OS NT 2000
DB 8.1.7
9iAS 1.0.2.1
Disco Admin 4.1.33e
Everthing was working fine until the install of Disco4i Admin. It would error on the install until I stopped the Reports Service. Post install - The reports service failed to start. NT specific error 186.
I've performed a TNSPING80.EXE myserver & verified the TNSNames.ora configuration in 806, iSuites, and 8.1.7. Everything looks ok.If you have set the TNS_ADMIN environment variable or registry key to an alternate value, Oracle9iAS Reports Services may fail to start with an error 186 or REP-0186. In such a case, you can start Oracle9iAS Reports Services from an MS-DOS command prompt as follows:
prompt> setenv TNS_ADMIN <IAS_HOME>/6iserver/network/admin
prompt> <IAS_HOME>/6iserver/reports60_server start
replacing <IAS_HOME> with the directory where you installed Oracle9i Application Server. This will force Oracle9iAS Reports Services to use the tnsnames.ora file at <IAS_HOME>/6iserver/network/admin.
Hope this will help
null -
Report printing failed with "Servlet error: An exception occurred. "
Hi,
I use Apex 3.1 in Oracle Express edition develop few applications. In one of the application, when I enable report printing in stardard reports and try to print to PDF/Excel, the servlet error occur.
I had configured FOP in my server and I can download PDF in "interative report", but for stardard report, the report printing failed.
I can successfully print the reports in my others applications. Anyone know what could be the reason which cause an application failed to print the report.
Thanks
VincentDoes your application name have special characters? I heard that the app name has to be just letters and numbers for this to work...actually testing right now.
-
Duplicate target database for standby failing with below error
Hello All, Need your assistance
We are creating a physical standby database (standalone) from 2 node RAC database, OS =RHEL5 and DB =11gR2
What we did: We took RMAN backup of primary DB along with archives and copied to standby server in same location. We have modified necessory prameters on primary as well as standby too.
The command we used :
RMAN>connect target sys/pwd@primary auxiliary sys/pwd@stdby
RMAN> run {
allocate auxiliary channel ch1 type disk;
duplicate target database for standby dorecover nofilenamecheck;
release channel ch1;
Note we tried : duplicate target database for standby as well as duplicate target database for standby nofilenamecheck methods too....But no luck..we are getting following error.
channel ch1: reading from backup piece /u01/BDB/BWFCCPRD_5fmpdvce_1_1
channel ch1: ORA-19870: error while restoring backup piece /u01/BDB/BWFCCPRD_5fmpdvce_1_1
ORA-19501: read error on file "/u01/BDB/BWFCCPRD_5fmpdvce_1_1", block number 121856 (block size=8192)
ORA-27072: File I/O error
Additional information: 4
Additional information: 121856
Additional information: 1036288
failover to previous backup
released channel: ch1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 10/20/2011 09:16:11
RMAN-05501: aborting duplication of target database
RMAN-05556: not all datafiles have backups that can be recovered to SCN 41855007833
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
could you pease help to resolve this ....?
Note : Creating standby using RMAN 11g new feature : duplicate target database for standby from active database is not possible in our environment since the network bandwith is tooooo low, We have tried and not able to succeed because of n/w issue, So we are doing this alternate method...!!!
Looking for your valuable advises...
Thanks in Advance....Take the fresh backup and also check the space crunch. The below clink may help you
ORA-27072: File I/O error Additional information: 2
--neeraj
Edited by: Vishen on Oct 20, 2011 2:14 PM -
PDF report generation fails with v7.01
I have software that generates a PDF report. I upgraded FireFox to v7.01 and I now get an error that the printer is not activated even though I am saving the report to a disc file and not printing it. Any ideas or suggestions are appreciated.
I just received instructions from the TMG software company to uninstall and install the PDF driver they use. This fixed the problem. Apparently upgrading to v7.01 damages the driver but reinstalling it corrects the problem.
Thanks for the advice.
Mike -
We migrated Packages from SSIS 2008 to 2012. The Package is working fine in all the environments except in one of our environment.
SSIS 2012 is intermittently failing with below error while importing data from a source table into a Destination table with same exact schema.
Error: 2014-01-28 15:52:05.19
Code: 0x80004005
Source: xxxxxxxx SSIS.Pipeline
Description: Unspecified error
End Error
Error: 2014-01-28 15:52:05.19
Code: 0xC0202009
Source: Process xxxxxx Load TableName [48]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Invalid date format".
End Error
Error: 2014-01-28 15:52:05.19
Code: 0xC020901C
Source: Process xxxxxxxx Load TableName [48]
Description: There was an error with Load TableName.Inputs[OLE DB Destination Input].Columns[Updated] on Load TableName.Inputs[OLE DB Destination Input]. The column status returned was: "Conversion failed because the data value overflowed
the specified type.".
End Error
But when we reorder the column in "Updated" in Destination table, the package is importing data successfully.
This looks like bug to me, Any suggestion?Hi Mohideen,
Based on my research, the issue might be related to one of the following factors:
Memory pressure. Check there is a memory challenge when the issue occurs. In addition, if the package runs in 32-bit runtime on the specific server, use the 64-bit runtime instead.
A known issue with SQL Native Client. As a workaround, use .NET data provider instead of SNAC.
Hope this helps.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support -
SharePoint SiteMialbox failed with 503 error (AutoDiscover.svc web service call failed)
SharePoint SiteMialbox failed with 503 error (AutoDiscover.svc web service call failed)
I followed Technet articles to configure SiteMailBoxes in our environment & exchange sever.
When we created Sitemailbox in a SiteCollection &when we try to open it, it failed with below error.
Site Mailbox
We are having trouble connecting to Exchange Server
The server might be temporarily unavailable. Please check back on this page in a few minutes. If this problem persists, please contact your system administrator.
Correlation ID: bb0fe99c-6f4e-e084-b191-881fbf0fa977, Error Code 10
ULS Log (503 error)
Autodiscover Diagnostics Response Headers: request-id: 95d12ceb-283e-4495-b28b-256503fd097c client-request-id: 742fe69c-ef5a-e084-ca05-6098c759c584 X-CalculatedBETarget: devapwxyz01a.devap.mydomain.com X-FEServer: DEVNAABCD01B
Content-Length: 0 Cache-Control: private Date: Tue, 03 Feb 2015 18:53:40 GMT Set-Cookie: X-BackEndCookie=; expires=Sun, 03-Feb-1985 18:53:40 GMT; path=/autodiscover; secure; HttpOnly Server: Microsoft-IIS/8.5 X-AspNet-Version:
4.0.30319 X-Powered-By: ASP.NET
742fe69c-ef5a-e084-ca05-6098c759c584
if I am correct, X-CalculatedBETarget supposed to be DEVNAABCD01B.devna.mydomain.com but it connected to different domain devapwxyz01a.devap.mydomain.com. Do you guys have any idea on this? (I verified
the same using fiddler, it is failing right at autodiscover.svc call.)
I wrote a powershell script to connect autodiscover service in sharepoint server & this web service call able connect right server X-CalculatedBETarget. It gave the expected response.
I am not sure why SharePoint webservice call (X-CalculatedBETarget) is going to different server?
let me know if you guys have any ideas.
Thanks.Thanks for the Response Raj.
I already followed the same instructions in the Links.
When SharePoint Autodisover.svc webservice send a request to Exchange server & Exchange server redirecting that request to different server, this is the problem i am facing right now.
X-CalculatedBETarget
supposed to be DEVNAABCD01B.devna.mydomain.com but it connected to different domain devapwxyz01a.devap.mydomain.com.
Let me know if you have any suggestions? -
SAP BW Query failing with ORA ERROR
Hi There
We have SAP BW 3.5 on AIX 5.3 TL10. Oracle is 9i (9.2.0.7). Our users are facing problems with Cost calculation job on cubes.
The job got failed with below error
Database error 1115 at FET access to table /BI0/03538
> ORA-01115: IO error reading block from file 48 (block #
> 1144987)#ORA-01110: data file 48:
> '/oracle//sapdata11/.data35.dbf'#ORA-27091: skgfqio:
> unable to queue I/O#ORA-27072: skgfdisp: I/O error#IBM AIX
> RISC System/6000 Error: 5: I/O error
Database error text........: "ORA-01115: IO error reading block from file 2
(block # 214041)#ORA-01110: data file 2:
'/oracle//sapdata4/_1/.data1'#ORA-27091: skgfqio: unable to queue
I/O#ORA-27072: skgfdisp: I/O error#IBM AIX RISC System/6000 Error: 5: I/O
error"
Internal call code.........: "[RSQL/READ/RSSDBATCH ]"
More Info:
Checked alert log, no errors in alert log. checked datafiles status and everything is perfect!! The errors are appearing in SAP application logs only
Is it due to any patches missing on AIX/oracle?
Any idea guys? Looks like some oracle/AIX error?Hello Shrinath,
please post the following content.
shell> aioo -a
Maybe you have reached the maximum number of asynchronous I/O requests.
For example in our SAP environments the following parameters are set
shell> aioo -a
minservers = 8
maxservers = 400
maxreqs = 1228
fsfastpath = 1
Regards
Stefan -
Oracle Database Express Edition 11g Release2 11.2.0 silent Installation failing with port8081 error
Hi everyone,
We are trying to create silent(unattended) install package to install Oracle database 11g express edition 11.2.0 silently on our machines. We modified the provided .iss file as per the requirement and tried to install with below command,
setup.exe /verbose /s /f1"c:\DISK1\response\oracleXE-install.iss" /f2"c:\DISK1\oracle_log.txt" /v" /l*v "c:\DISK1\oracle_msi_log.txt""
Installation is failing with below error from the log file,
1: OracleXE-Server-Install-Message: Port 8081 is in use. Specify a different port number.
Installshield 11:22:22: Installation aborts, ready to shut down.
Port 8081 is being used by mcAfee in our organization. We tried passing a different port number for Http in the response file(.iss), but it is failing with same reason. We have searched foruns and found that we need to stop the port8081 during the oracle XE installation and can start it later once the installation is completed. But As port 8081 is being used by McAfee in our organization, we could not stop it even during oracle XE installation as it creates security issues.
I am attaching the MSI log(failure log) and modified .iss(modfied .iss file to .iss.txt to be able to attach) files. Please look into it and suggest how can we achieve silent installation in this case.Pl see previous discussions about this topic - seems to be a limitation of the silent install process
OracleXE-Server-Install-Message: The 8081 port is in use. -
Cisco ISE 1.1.1.268 Giving error (Report Generation failed. Cause: Null)
I have this issue and I would be very thankful if someone has the answer for this. When I am trying to access Operation > Report > Catalog > Posture > Posture Detail Assessment & clicking on any posture session detail icon. I am getting following attached errors.
1. Report Generation failed. Cause: Null
2. Cannot execute the statement.
Does anyone knows how to get rid of this error & to get access of posture detail.
ThanksThe error message means that Active Directory server Reject the authentication attempt
as for some reasons the user account got locked.I guess, You should ask your AD Team to check in the AD
Event Logs why did the user account got locked.
Under Even Viewers, You can find it out
Regards
Minakshi (Do rate the helpful posts) -
Cube refresh fails with an error below
Hi,
We are experiencing this problem below during planning application database refresh. We have been refreshing the database everyday, but all of a sudden the below error is appearing in log. The error is something like below:
Cube refresh failed with error: java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
java.io.EOFException
When the database refresh is done from workspace manually, the database refresh is happening successfully. But when triggered from unix script, its throwing the above error.
Is it related to some provisioning related issue for which user has been removed from MSAD?? Please help me out on this.
Thanks,
mani
Edited by: sdid on Jul 29, 2012 11:16 PMI work with 'sdid' and here is a better explaination of what exactly is going on -
As part of our nightly schedule we have a unix shell script that executes refresh of essbase cubes from planning using the 'CubeRefresh.sh' shell script.
Here is how our shell looks like -
/opt/hyperion/Planning/bin/CubeRefresh.sh /A:<cube name> /U:<user id> /P:<password> /R /D /FS
Here is what 'CubeRefresh.sh' looks like -
PLN_JAR_PATH=/opt/hyperion/Planning/bin
export PLN_JAR_PATH
. "${PLN_JAR_PATH}/setHPenv.sh"
"${HS_JAVA_HOME}/bin/java" -classpath ${CLASSPATH} com.hyperion.planning.HspCubeRefreshCmd $1 $2 $3 $4 $5 $6 $7
And here is what 'setHPenv.sh' looks like -
HS_JAVA_HOME=/opt/hyperion/common/JRE/Sun/1.5.0
export HS_JAVA_HOME
HYPERION_HOME=/opt/hyperion
export HYPERION_HOME
PLN_JAR_PATH=/opt/hyperion/Planning/lib
export PLN_JAR_PATH
PLN_PROPERTIES_PATH=/opt/hyperion/deployments/Tomcat5/HyperionPlanning/webapps/HyperionPlanning/WEB-INF/classes
export PLN_PROPERTIES_PATH
CLASSPATH=${PLN_JAR_PATH}/HspJS.jar:${PLN_PROPERTIES_PATH}:${PLN_JAR_PATH}/hbrhppluginjar:${PLN_JAR_PATH}/jakarta-regexp-1.4.
jar:${PLN_JAR_PATH}/hyjdbc.jar:${PLN_JAR_PATH}/iText.jar:${PLN_JAR_PATH}/iTextAsian.jar:${PLN_JAR_PATH}/mail.jar:${PLN_JAR_PA
TH}/jdom.jar:${PLN_JAR_PATH}/dom.jar:${PLN_JAR_PATH}/sax.jar:${PLN_JAR_PATH}/xercesImpl.jar:${PLN_JAR_PATH}/jaxp-api.jar:${PL
N_JAR_PATH}/classes12.zip:${PLN_JAR_PATH}/db2java.zip:${PLN_JAR_PATH}/db2jcc.jar:${HYPERION_HOME}/common/CSS/9.3.1/lib/css-9_
3_1.jar:${HYPERION_HOME}/common/CSS/9.3.1/lib/ldapbp.jar:${PLN_JAR_PATH}/log4j.jar:${PLN_JAR_PATH}/log4j-1.2.8.jar:${PLN_JAR_
PATH}/hbrhppluginjar.jar:${PLN_JAR_PATH}/ess_japi.jar:${PLN_JAR_PATH}/ess_es_server.jar:${PLN_JAR_PATH}/commons-httpclient-3.
0.jar:${PLN_JAR_PATH}/commons-codec-1.3.jar:${PLN_JAR_PATH}/jakarta-slide-webdavlib.jar:${PLN_JAR_PATH}/ognl-2.6.7.jar:${HYPE
RION_HOME}/common/CLS/9.3.1/lib/cls-9_3_1.jar:${HYPERION_HOME}/common/CLS/9.3.1/lib/EccpressoAll.jar:${HYPERION_HOME}/common/
CLS/9.3.1/lib/flexlm.jar:${HYPERION_HOME}/common/CLS/9.3.1/lib/flexlmutil.jar:${HYPERION_HOME}/AdminServices/server/lib/easse
rverplugin.jar:${PLN_JAR_PATH}/interop-sdk.jar:${PLN_JAR_PATH}/HspCopyApp.jar:${PLN_JAR_PATH}/commons-logging.jar:${CLASSPATH
export CLASSPATH
case $OS in
HP-UX)
SHLIB_PATH=${HYPERION_HOME}/common/EssbaseRTC/9.3.1/bin:${HYPERION_HOME}/Planning/lib:${SHLIB_PATH:-}
export SHLIB_PATH
SunOS)
LD_LIBRARY_PATH=${HYPERION_HOME}/common/EssbaseRTC/9.3.1/bin:${HYPERION_HOME}/Planning/lib:${LD_LIBRARY_PATH:-}
export LD_LIBRARY_PATH
AIX)
LIBPATH=${HYPERION_HOME}/common/EssbaseRTC/9.3.1/bin:${HYPERION_HOME}/Planning/lib:${LIBPATH:-}
export LIBPATH
echo "$OS is not supported"
esac
We have not made any changes to either the shell or 'CubeRefresh.sh' or 'setHPenv.sh'
From the past couple of days the shell that executes 'CubeRefresh.sh' has been failing with the error message below.
Cube refresh failed with error: java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
java.io.EOFException
This error is causing our Essbase cubes to not get refreshed from Planning cubes through these batch jobs.
On the other hand the manual refesh from within Planning works.
We are on Hyperion® Planning – System 9 - Version : 9.3.1.1.10
Any help on this would be greatly appreciated.
Thanks
Andy
Edited by: Andy_D on Jul 30, 2012 9:04 AM -
I plug usb mass storage device to my macbook pro i7 than every thing is stack and i reinforce to shutdown and than I start again but mac fail to boot again.
I tried different optiones in disk utility in mac os startup disk. but still fail to repair, erase and partition. I try to fix with the steps listed in
https://discussions.apple.com/message/13288923#13288923
but it fail to partition with the msg:
Partition Failed
Partition failed with the error: POSIX reports: The operation couldn’t be completed.cannot allocate memory
pls pls pls help urgentely on this matter I stop working.
Kind Regards,
peHi again OGELTHORPE.
I've already run two hardware tests. One quick one and one extended one. It was unable to pick anything up.
It's like everything is running perfectly, but when I go to erase the HDD or partition it, it pops up with the error message. Even when I try to erase and partition using "Terminal", I received the same error message.
It's beginning to do my head in, but will see if replacing the SATA cable will make any difference. If it doesn't, I'll hazard a guess it could be the Logic Board.
Thanks again for your suggestions!
L. -
I get the following error when formatting a external hard drive.
Partition failed with the error:
POSIX reports: The operation couldn’t be completed. Cannot allocate memory
I have a Macbook pro 13" A1278. I purchased it around december 2010. I have a HHD 3.5" drive desktop select II 1.5TB. I purchased it around Febuary/March 2011 to use with my Macbook pro. I formatted it and moved all my files to there, I got it so my macbook's hard drive wouldn't brake and I lose everything on my macbook.
Is there any fixes?First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes." -
Report generation failed----error code:-17205; Access Denied.
Hi, All
i have a trouble about report generation.it seems the error happened at the "write UUT report"--this step is teststand report generation'DLL.
detail:
An error occurred calling 'Save' in 'Report' of 'NI TestStand 2010 SP1 API'
Access Denied.. Error writing to file 'D:\program\seq\xxx.xml'.
The file might be open in another application. If file access is intermittently denied, you should try disabling the Microsoft FindFast utility.
error code:-17205; Access Denied.
locationtep 'Write UUT Report' of sequence 'Single Pass' in 'SequentialModel.Seq'
How to fix it?
Thanks a lot.
BRHm, it looks like the file might be open in another application. If you see that file accesss is intermittently denied, you should try disabling the Microsoft FindFast utility.
CTA, CLA, MTFBWY
Maybe you are looking for
-
I recently downloaded about 20 new songs and put them into iTunes. I synced my iPhone with iTunes, but suddenly unchecked songs started syncing to my iPhone and the songs i had downloaded would not. I looked into it and under "on my phone," the songs
-
How to generate complete file list of hard drive and output to text file
I need to start backing things up to drives, which over time will be put in storage. I would like to be able to create a complete file index and folder tree of every drive and have it output to a text file so that in the event I ever need to go back
-
Anyone know of a free app to open .cap files? or a paid app for that matter?
I have some files I used to use on a windows based pc and they are files with a .cap extension. They are schematics for projects I like to work on but cant seem to open them and cant find anything in the app store for .cap files. any suggestions or a
-
Numbers crashes when I try to open an Excel .xlsx file
I downloaded an Excel file from my brokerage with the .xlsx extension. In the past, I was able to open similar file with Numbers. Now, Numbers crashes whenever I try to open these types of files, even the ones I used with Numbers in the past. Any hel
-
Gurus, Can I change the dbid of a databae to whatever number I want?