Report Generation for Excel does not work after using the Application Builder

I have a VI that writes data to an Excel file using the Report Generation Toolkit. I recently compiled the VI into a single Application (EXE) using the Application Builder. My VI runs its tests properly, but no data is written to Excel. What could be the cause? I don't receive any error messages.

Hi
I usually build exe-files, which sometimes also have report functionality.
Open the Application Builder and check the following things:
1. Add the following vis: _Word Dynamic VIs.vi, _Excel Dynamic VIs.vi They should be located in the directory ..\LabVIEW X.X\vi.lib\addons\_office in the llbs _wordsub.llb and _exclsub.llb (report1.jpg)
2. If you use an Installer, go to the Advanced Settings. There you can select some things to include in the Installer. Check if "NI Reports Support" is selected. (report2.jpg)
These are the things I always do, if I need reports and I never had problems up to now. I made two screen-shots of these settings.
Hope this helps.
Thomas
Using LV8.0
Don't be afraid to rate a good answer...
Attachments:
report.zip ‏25 KB

Similar Messages

Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applica

Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.

I received no error message. The application was just trying to find applications unsuccessfully.
I am using MAC OS 10.10.1
I tried to uninstall the application but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
Otherwise I would have to reinstall everything and this would be a pain.
Thanks for your help.

Windows update does not work after using System recovery disk

I have a Toshiba Satellite c655 with WIndows 7 64 bit Home premium. The hard drive died on it, so I purchased a new hard drive and purchased the appropriate Recovery media from Toshiba. I followed the directions and installed the 3 disks on to the new hard drive. But Windows update does not work I get the following error: Windows update can not currently check for updates, because the service is not running. You may need to restart your PC    No matter what I try, I can not get it to work. And it will not let me install Windows Defender either. Any ideas or help would be appreciated. Thank you in advance for your time on this matter.
Solved!
Go to Solution.

I get errors saying A problem is preventing the troubleshooter from starting.
That makes two similarities to the following thread. Both Windows Update and Troubleshooters fail to work correctly.
   Trouble with reinstall of Win7 64 on a L505-ES5018
The fix was to install a new hard disk driver.
   Intel Rapid Storage Technology
-Jerry

Interface for Excel does not work in Windows 7 - Important

Hi,
Im using BPC 75 MS SP04 with a computer Windows 7, IE 9, Office 2007. Apparently the Excel works "fine", the issue is that whenever I try to access to Interface for web from the main page (clicking the icon) it does not work, does not do anything...
What do you suggest to do?
Working directly in excel is not a problem, accesing to templates vía "Etools - Open dynamic templates" is fine.
The issue is that users that have every access controlled by BPF's (using Interface for Web) cannot work.
Also, we use a template that uses 12 EVDRE reports in the background, we know it is a lot... but it was required like that.
Once accesing to this template vía Etools -Open dynamic template... Excel gets stuck and I have to force it to shut down.
Also Im working with a Vista system, Office 2003.
For this systems, we also use the template EVDRE (12 reports). Once any of both systems access to this specific template, Excel gets stuck and I have to shut it down. Any other template is able to work with, but these 2 machines (7 and Vista) cant.
Please help !
Velázquez

Hi Velázquez,
Based on SAP Note: 1603248, IE9 is not supported on BPC 7 and 7.5.
So you have to revert to IE8.
Only IE8 and IE7 are supported in 7.5 MS.
Hope this helps.
Karthik AJ

Share option for email does not work after Yosemite upgrade.

Hi,
Does anybody know why the share option, "Share via email" does not work anymore after Yosemite upgrade? I love this feature. It's just quick and easy.
Rod.

On Yosemite, Pages '09 v4.3 no longer recognizes the Share > Send Via Email categories. You will have to export and manually drag/drop/attach documents to Mail. There is no fix.

Keyboard does not work after using Support Drivers

I have a Macbook Pro 4,1 15" 2.4GHz C2D, and managed to get Bootcamp installed on it with Win7 Home Pro. I have verified that it runs correctly, but it is missing many of the drivers needed to make things run smoothly. I no longer have my Leopard disks that the machine came, so I figured the WindowsSupportDrivers would be the way to go.
When I install them and reboot, the keyboard does not work. When I hit capslock, I get the caution notice indicating underneath my password field indicating the capslock key is on, so it's not like my entire keyboard is disabled. The system is unusable right now, since I have to enter my password to login, and it does not take any keyboard input. Using an external keyboard did not resolve this issue.
I did a system restore to get it back to a usable state for the time being.
Is there an alternative to the BCA support drivers or the Leopard disk? What's going on with my keyboard after the driver update?

Maybe you have installed obsolete drivers. If you have Lion, open Boot Camp Assistant (Applications > Utilities) in OS X and download Boot Camp drivers

Cross Dissolve transition does not work after cutting the tails of both ends.

I used to apply the Cross Dissolve video transition a while ago and never had any problems. My Cross Dissolve is not working for whatever reason. I usually split parts of the movie using the razor tool and cut the tail of both parts I just split, than apply the Cross Dissolve, but it does not work at all. I dont know if I am doing something wrong here, I need your help if you can help me with that. I have also tried to apply Film Dissolve but I have the same problem.
Thank you very much!!
Renata

I am trying to put together a recruiting video. I was out recording a bunch of people talking about the organization, when I am working with something like this I usually try to shorten the 3 or 5 minute clip I have from one person and just connect the parts of the clip that need to be on the screen, that requires several cuts during the clip and merge the good parts together using the cross dissolve. It is very simple and I have done several times, but for whatever reason during certain parts of the clip when applied will not work. The clips are usually 1 to 3 minutes long and I need to extract the good parts making no more than 1 minute for each peson talking.
Thanks!
Renata

Aperture 2.0 Activation Key does not work after using older trial version

I was using the installed trial version of Aperture 1.5+ in my recently purchased MacBook Pro Duo (December 2007). After using the trial version for 30 days I debated whether to take the plunge ...and then within a few days recieved word that v2.0 was out at 199$. That motivated me ...however, here I am nearly one week later without ability to activate a full blown version of 2.0.
I recieved the activation key, but it doesn't accept it in the dialog to upgrade in the trial version. Hint seems to be that it is not a serial number I am entering but an activation key.
I did not order a boxed version, so what do I do now? Support is not too helpful as I have searched Apple's website and have no clue as to where to go.
Last resort ... I want my $199 back!

did you download the trial for Aperture 2

Application with excel does not work after installing. Cause is excel report generation

First of all, yes i have selected the installer and included the NI report support. I can run and install the application buth the application freezes when handling an excel-related VI. I can still run the program in Labview and it works fine buth i want to use an exe because i have seen that it works considerably faster.
Thanks,
Andries Wim

wim andries student wrote:
> First of all, yes i have selected the installer and included the NI
> report support. I can run and install the application buth the
> application freezes when handling an excel-related VI. I can still
> run the program in Labview and it works fine buth i want to use an exe
I won't be able to help you with the Excel problem. I do not like Active
X and don't deal with it if I don't absolutely have to.
But your claim that the executable runs considerably faster given the
same hardware and system resources definitely sounds suspicious. LabVIEW
has very little speed difference between the development system and an
executable. The difference is so small that you almost never should be
able to even notice it. If it is very notica
ble there are other reasons
that it is faster, for instance failed initialization for whatever
reasons, which makes subsequent functions to simply skip their task
instead of doing something.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Linux logfile monitoring does not work after using "privileged datasource"

Hello!
I have noticed a strange behaviour on one of my Linux Agents (lets call it server_a) regarding logfile monitoring with the "Microsoft.Unix.SCXLog.Datasource" and the "Microsoft.Unix.SCXLog.Privileged.Datasource".
After successfully testing monitoring of /var/log/messages on server_a with the "Privileged Datasource". This test has been on server_a and the MP containing this rule has been delete from the management gorup before the following tests.
I wanted to test another logfile (lets call it logfile_a) using the normal datasource "Microsoft.Unix.SCXLog.Datasource" on server_a. So I created the usual logfile rule (rule_a) in XML (which I have done countless times before) for monitoring
logfile_a. Logfile_a has been created by the "Linux Action Account User" with reading rights for everyone. After importing the Management Pack with the monitoring for logfile_a I had the following warning alert in the scom console managing
server_a:
Fehler beim Überprüfen der Protokolldatei "/home/ActionAccountUser/logfile_a" auf dem Host "server_a" als Benutzer "<SCXUser><UserId>ActionAccountUser</UserId><Elev></Elev></SCXUser>";
An internal error occurred. (the userid has been changed to keep the anonimity of our action account).
To make sure I did not make any mistakes in the XML i have created a new logfile rule (rule_b) monitoring "logfile_b" on "server_a" using the "Logfile Template" under the authoring tab. logfile_b was also created by the "Linux
Action Account User" and had reading rights for everyone. Unfortunately this logfile rule created the same error:
Fehler beim Überprüfen der Protokolldatei "/home/ActionAccountUser/logfile_b" auf dem Host "server_a" als Benutzer "<SCXUser><UserId>ActionAccountUser</UserId><Elev></Elev></SCXUser>";
An internal error occurred. (the userid has been changed to keep the anonimity of our action account).
Although both rules (rule_a and rule_b) used the "Microsoft.Unix.SCXLog.Datasource" which uses the Action Account for monitoring logfiles, the above error looks to me as SCOM wants to use the privileged user, which in this case it not necessary
as the Action Account can read logfile_a and logfile_b without any problems.
So after a few unsuccessfull tries to get both rules to raise an alert I tried to use the "Microsoft.Unix.SCXLog.Privileged.Datasource" for rule_a as last resort. Then suddenly after importing the updated Management Pack I finally received the
alert I desperately waited for this whole time.
Finally after lot of text here are my questions:
Could it be that the initial test with the Privileged Log Datasource somehow screwed up the agent on server_a so it could not monitor logfiles with the standard log datasource? Or may anyone of you might have an idea what went wrong here.
Like I said both logfile could be accessed and changed by the normal Action Account without any problems. So privileged right are not needed. I even restarted the scom agent in case something hanged.
I hope I could make the problm clear to you. If not, don´t hesitate to ask any questions.
Thank you and kind regards,
Patrick

Hello!
After all that text, I fogrot the most essential information..
We are currently using OpsMgr 2012 SP1 UR4, the monitored server (server_a) has agent version 1.4.1-292 installed.
Thanks for the explanation of how the logprovider works. I tried to execute the logfilereader just to see if there are any errors and everything looks fine to me:
ActionAccount @server_a:/opt/microsoft/scx/bin> ./scxlogfilereader -v
Version: 1.4.1-292 (Labeled_Build - 20130923L)
Here are the latest entry in the scx.log file:
* Microsoft System Center Cross Platform Extensions (SCX)
* Build number: 1.4.1-292 Labeled_Build
* Process id: 23186
* Process started: 2014-03-31T08:29:09,136Z
* Log format: <date> <severity>     [<code module>:<process id>:<thread id>] <message>
2014-03-31T08:29:09,138Z Warning    [scx.logfilereader.ReadLogFile:23186:140522274359072] scxlogfilereader - Unexpected exception: Could not find persisted data: Failed to access filesystem item /var/opt/microsoft/scx/lib/state/ActionAccount/LogFileProvider__ActionAccount_shome_sActionAccount_slogfilewithoutsudo.txtEDST02
2014-03-31T08:29:09,138Z Warning    [scx.core.providers.logfileprovider:5209:140101980321536] LogFileProvider InvokeLogFileReader - Exception: Internal Error: Unexpected return code running '/opt/microsoft/scx/bin/scxlogfilereader -p': 4
2014-03-31T08:29:09,138Z Warning    [scx.core.providers.logfileprovider:5209:140101980321536] BaseProvider::InvokeMethod() - Internal Error: Unexpected return code running '/opt/microsoft/scx/bin/scxlogfilereader -p': 4 - [/home/serviceb/ScxCore_URSP1_SUSE_110_x64/source/code/providers/logfile_provider/logfileprovider.cpp:442]
* Microsoft System Center Cross Platform Extensions (SCX)
* Build number: 1.4.1-292 Labeled_Build
* Process id: 23284
* Process started: 2014-03-31T08:30:06,139Z
* Log format: <date> <severity>     [<code module>:<process id>:<thread id>] <message>
2014-03-31T08:30:06,140Z Warning    [scx.logfilereader.ReadLogFile:23284:140016517941024] scxlogfilereader - Unexpected exception: Could not find persisted data: Failed to access filesystem item /var/opt/microsoft/scx/lib/state/ActionAccount/LogFileProvider__ActionAccount_shome_sActionAccount_stest.txtEDST02
2014-03-31T08:30:06,142Z Warning    [scx.core.providers.logfileprovider:5209:140101980321536] LogFileProvider InvokeLogFileReader - Exception: Internal Error: Unexpected return code running '/opt/microsoft/scx/bin/scxlogfilereader -p': 4
2014-03-31T08:30:06,143Z Warning    [scx.core.providers.logfileprovider:5209:140101980321536] BaseProvider::InvokeMethod() - Internal Error: Unexpected return code running '/opt/microsoft/scx/bin/scxlogfilereader -p': 4 - [/home/serviceb/ScxCore_URSP1_SUSE_110_x64/source/code/providers/logfile_provider/logfileprovider.cpp:442]
Strangely I could not acces the "Action Account User" directory under /var/opt/microsoft/scx/log as "ActionAccount" user. Is it ok for the directory to have the following rights: drwx------ 2 1001 users? Instead of "1001" it should say "ActionAccount",
right?
This could be a bit far fetched, but perhaps the logfile provider can´t access logfiles as the "ActionAccount" on this server because it needs to write in the scx.log file. But as the "ActionAccount" can´t access the file, the logfile provider throws
an error. And as "Privileged Account" the rule works flawlessly, as the logfile provider running in root context can access everything.
Don´t know if that makes sense, but right now it sounds logical to me.

WMI InvokeMethod for StartService does not work when used with ManagementOperationObserver on IIS

Hi,
I am using .net 4.5 and C# to remotely restart the services. I am using WMI to do this task. This code works when called from windows application on the machine, but same code when used inside web application it gives exception of invalid parameter.
We saw it log error in System Event log
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
{49BD2028-1523-11D1-AD79-00C04FD8FDFF}
and APPID
{49BD2028-1523-11D1-AD79-00C04FD8FDFF}
to the user IIS APPPOOL\<app pool user> SID (S-1-5-82-634865507-143429395-1373251082-3464226226-3883016302) from address LocalHost (Using LRPC). This security
permission can be modified using the Component Services administrative tool.
I am pasting below code for reference.
m.InvokeMethod(observer, "Startservice", null, null);
//wait until invoke method is complete or 30 sec timeout
int intCount = 0;
while
(!completionHandlerObj.IsComplete)
if (intCount > 60)
MessageBox.Show("Inside 30 seconds");
break;
//wait 1 sec.
System.Threading.Thread.Sleep(1000);
//increment counter
intCount++;
//see if call was successful.
if (HandlerObj.ReturnObject.
Properties["returnValue"].Value.ToString() == "0")
isStarted = true;
Dhanaji

For web apps the context will be the context of the app pool. Unless you set the app pool to run as a user account that has admin privileges on the remote machine then you won't be able to control the services on a remote machine. If you have
enabled Win auth such that the app runs in the context of the remote user then you might need to turn on delegation otherwise the hop won't work.
Note that if you are using Win auth then consider using ServiceController instead which provides the same functionality as WMI but with a cleaner syntax. This wouldn't work if you need to impersonate a user though.
Michael Taylor
http://blogs.msmvps.com/p3net

Flex: Actionscript project swf is not working after export the release build...

Hi guys..
   I tried to built a project with AS3 only in Flex. When I run the project in flex, everything looks fine, but when I export the release build, the images that are supposed to be added are gone. I appreciate if someone can help me about it.
          init();
            public function init(loadedVideoCount:Number):void{
            singleHolder=new singleVideoCont();
            singleHolder.x=loadedVideoCount*singleHolder.width+2;
            singleHolder.y=6;
            singleHolder.buttonMode=true;
            addChild(singleHolder);
            this.addEventListener(MouseEvent.CLICK,onClick);
            showTn();
        private function showTn():void{
                imgLoader = new Loader();
                imgLoader.load(new URLRequest(_tnPath));
                        imgLoader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS,onProgress);
    imgLoader.contentLoaderInfo.addEventListener(Event.COMPLETE,onImgLoaded);
        private function onImgLoaded(event:Event):void {
        singleHolder.progBar.alpha = 0;
               var image:Bitmap = imgLoader.contentLoaderInfo.content as Bitmap;
                image.width=TN_WIDTH;
                image.height=TN_HEIGHT;
                image.x=3;
                image.y=3;
                singleHolder.addChild(image); //this line work when I run the project inside flex but the images are gone when I test my release build...
                imgLoader.contentLoaderInfo.removeEventListener(ProgressEvent.PROGRESS,onProgress);
                imgLoader.contentLoaderInfo.removeEventListener(Event.COMPLETE,onImgLoaded);
                //imgLoader = null;

The link you provided is to the SWF file, not to an HTML
file, so no one can test your HTML file.
Have you checked the code for the embedding of the SWF file
in your HTML file? I don't use Dreamweaver much, but I do know that
if you start assembling a Dreamweaver file without first saving the
HTML, embedded graphics and other items are inserted as direct
links to the files on your computer, rather than as relative paths.
There is one other possible issue: I note that your swf is
called CWABanner.swf. Depending on your FTP settings, it is
possible that your server is forcing all file names to lower case
(a common practice). Which means the file on your server will be
cwabanner.swf. Again, depending on how the web server is set up, if
it is case sensitive, it will treat CWABanner and cwabanner as
separate files. So if the HTML calls CWABanner.swf, but the FTP
upload has forced a rename to lower case to cwabanner.swf, the HTML
file will not find it. Check this out, or to be absolutely certain,
rename everything to lower case: the file name itself and the
reference in the HTML file.

My serial number will not work after using the trial, I purchased the software from Best Buy.

Adobe Premiere Elements 11 I have uninstalled and reinstalled, but still will not accept serial number. Please advise

lindawhitssitt
Please use the following link to reach Adobe Chat with your serial number issue. You should get immediate and effective resolution to your issue. After the link opens, click on "I still need more help." and the Adobe Chat pop up will appear.
http://helpx.adobe.com/contact.html?product=premiere-elements&topic=serial-number-issues-o r-activating-my-product
Please let us know the outcome.
Thanks.
ATR

My iphone 3g does not work after updating the software through itunes

Some days ago I made a security copy of my iPhone 3G at iTunes. Today when I conected my iPhone to iTunes I had a message saying I had to update the software of my phone. I accepted and after around 30 minutes of update I got another message saying there had been a problem restarting my phone. The screen of my mobile was showing the iTunes icone and the USB icone and I can't access to the content of it. So I disconnected the mobile from iTunes and connected it again and I got another message saying iTunes has detected a mobile phone in recovering process and it says I have to restaure the iPhone to be able to use it in iTunes. And, by the way, before all this when I connected my phone to iTunes the iTunes recognized the name of my mobile. It doesn't anymore, it just says "iPhone" on the left column.
My question is: Should I restaure the iPhone? Will I be able to recover the security copy I made some days ago? Where can I access that copy?
Thank you so much in advance!
B

You're welcome.
Already answered.
When restoring the iPhone with iTunes, the iPhone is completely erased first folllowed by the current iOS version being re-installed. After iOS is reinstalled, you are prompted to restore from your iPhone's backup, which is the default selection. The other available selection is to restore as a new iPhone or not from the backup.

Wi-Fi does not work after 7 ISO download for iPhone 4s What is the solution

Wi-Fi does not work after 7 ISO download for iPhone 4s
What is the solution

For clarification, 7 ISO is not an Apple software product
iOS 7 is...
What is your issue with the wifi?
Have you reset network settings?
Can you include screenshots of the issue?

Report Generation for Excel does not work after using the Application Builder

Similar Messages

Maybe you are looking for