Report generation issue for headcount/workforce

Hi,
I have succesfully deployed my capex, workforce, and C/F application. I was wondering if someone could help me with the creation of a head count report based on this data where I could see the Dept Code, Name, Salary in a report. I have gone through the process of creating a report in Dataform with the dimensions but I am unable to see all the dimensions listed. I do have access to both smart view + financial reporting studio.
Thanks

Nvm, solved it just had to set up Reporting studio in order to create an accurate report.

Similar Messages

LabView database connectivity toolkit 1.0.1 compatibility with MS-ACCESS 2010 / Labview report generation toolkit for Office 1.1.3 compatibility with Office 2010

In the very near future we will be forced to upgrade to Office 2010 Company wide and I am a little concerned with some of our older test platforms that have applications built in LabView 8.2.1. These applications save data to MS-ACCESS 2000 databases using the LabView database connectivity toolkit 1.0.1. Office 2003 is also loaded on these test platforms with all test reports generated using the LabView report generation toolkit for Office 1.1.3.
I have not gotten my hands on a copy of Office 2010 yet to see if there will be any compatibility issues. Does anyone have any experience in this area?

The MS-Access part is fairly well isolated through the ADO interface LabVIEW uses. The only possible problems there IMHO are difficulties with possible Acess compatibilities itself such as an example, SQL statement you may have invoked directly through the ADO interface. Maybe you did use a depreciated command back then that has since been removed. As long as the only thing you do are simple INSERT and SELECT statements only, I would expect it to just keep working.
The Report Generation interface is a different beast. Microsoft manages to change the Automation interface with every version of office in a way that strongly binding applications like LabVIEW break on. There is no good way around that except not changing those methods, but that is a cause that has been lost already. You will certainly have to verify the version dependant Report Generation API VIs to still work with Office 2010 and most likely you will have to make some changes to those VIs to make them work again with the modified ActiveX interface of Office 2010. Note, that I have no experience with porting report generation to Office 2010 but I have had some headaches from porting that between Office 97, 2000, 2003, and 2007.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

EOS / EOL / PSIRT report generation Issue

HI All ,
I am using lms 3.2 with RME 4.3.0
Recently i have seen 2 bugs related with EOS/EOL /PSIRT report generation issue
CSCta76147
CSCtc36563
The status of the bug is given as Fixed(verified )
Status
Fixed
(Verified)
Severity 3 - moderate
Last Modified
In Last Year
Product
CiscoWorks Resource Manager Essentials
1st Found-In
4.1
4.3
Fixed-In
5.0
Component(s)
eoxpsirtreports
Here the fixed release is given as 5.0 , can anyone please tel me where to get the 5.0 version for download .
( Is the 5.0 the LMS version or the RME version )
When i am trying to generate EOS/EOL report, i am getting error saying check the connectivity to cisco .
Regards
Angus

HI Afroj ,
When i am running the EOS/EOX or PSIRT report the job status is showing running but its not getting stoped .
I tried using the local option , downloaded the offline file from the below link and placed in
NMSROOT\files\rme\jobs\inventory\reports\EOX_PSIRT\local_xml
"http://tools.cisco.com/support/downloads/go/ImageList.x?relVer=4.1.1&mdfid=282635175&sftType=CiscoWorks+Resource+Manager+Essentials+Patches&optPlat=Solaris&nodecount=2&edesignator=null&modelName=CiscoWorks+Resource+Manager+Essentials+4.3&treeMdfId=268439477&treeName=Network+Management&modifmdfid=&imname=&hybrid=Y&imst=N&lr=Y
even then the job is running continuously its not stopping .
I have a RME version 4.3.0
Kindly let me know what i am doing is correct .
Regards
Angus

How to obtain the table index in word use LabVIEW Report Generation Toolkit for Microsoft Office

I created a word templete and it had several tables. When I use the "Word Edit Cell" function in LabVIEW Report Generation Toolkit for Microsoft Office, the function need "table index", and I didn't find any function to get or set the table index in word document. How can I achieve my attention to write value to specified table cell using the "Word Edit Cell" function?
Thanks for reply!
YangAfreet

Hi yangafreet
You do not need to get the table index for the word edit cell.vi from anywhere. LabVIEW will automatically index all the tables in the document. See the attatched vi for an example.
Rich
Attachments:
Table Edit.vi ‏23 KB

Report generation issue

what are the diff report generation issues?

Nvm, solved it just had to set up Reporting studio in order to create an accurate report.

LabVIEW Report Generation Toolkit for Microsoft Office

Hi!
One question. I have bought the LabVIEW Report Generation Toolkit for Microsoft Office
Version 1.0a and am trying to install it under Labview 7.1 but the installation stops with the error: "you need a Labview Version 6.0 runtime engine." Is there any possibility to install the toolkit anyway?
Regards
Stefan

Hi
You can try to update your Version 1.0 to Version 1.0.1. Then it should be working.
Here ist the link for the free update:
http://digital.ni.com/softlib.nsf/websearch/19003CF70BB8A57186256E5A00672E2A?opendocument
if it not works you can try to install the runtime engine 6.0 on your system. her is the link:
http://digital.ni.com/softlib.nsf/websearch/D5F11A64A905DB27862569EC005E31E2?opendocument&node=132070_US
Regards
Manuel

Report Generation toolkit for labview 2010

H All.
I'm looking to download the report generation toolkit for labview 2010. When I proceed to download the toolkit from the national instrumnets website, it says that i need to labview 2011 or later in order to install it.
Is there a version of this report generation toollkit for labview 2010 and can someone provide a link maybe??.
Thanks for reading.
Solved!
Go to Solution.

Try this: [Link removed, NI software downloads can be found on ni.com/downloads, the LabVIEW 2010 Report Generation Toolkit is available to customers with Standard Service Program here: http://joule.ni.com/nidu/cds/view/p/id/3247/lang/en, other customers may contact NI directly]
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.

Add Report Generation toolkit for Microsoft Office in exe

Hi
I am having a problem. I am using LabVIEW 8.20, Report Generation Toolkit for Microsoft Office 1.1.2 and Microsoft Excel 2003. My OS is Windows XP (SP )
I want to build the vi attached below into an exe. The vis that I used are from addons>>_office>>excel.llb. I follow the suggestion found in the link below and add in all the files in excel.llb into my project so that it can be added into the executable as dynamic vis. However, some vis in excel.llb cannot be added into my project. After I have add all vis that can be added into the project, I build an application (exe) with the vi below as the Main vi and all other added vis (from excel.llb) as dynamic vis. After that, I build and run this exe on the same PC. I am unable to run it.
This vi will save datas when I click on the stop button. After I click on the stop button, a window will pop-up and prompt me to select which directory to save the vi. When I run the exe, I type in test.xls (for example) but the file saved is a picture and not an excel file. If I just run the vi instead of the exe, Excel will open and datas and graph will be displayed in Excel.
May I know where did I done wrong??
How do I use the Report Generation Toolkit in an executable with Microsoft Excel?
http://digital.ni.com/public.nsf/websearch/C38CE3F30542D65B86256F0E00740DD8?OpenDocument
Thank you & Regards
Lee
Attachments:
Self-Regulating.vi ‏132 KB
Untitled Project 1.zip ‏3841 KB

Hi centerbolt,
Thank you for your reply. I have tried adding in just that dynamic vi found in Excel Library and my main vi but it still cannot work. Is there anything that I need to look out as well?? [View attached picture.]
Thank you & Regards
Lee
Attachments:
added.JPG ‏92 KB

LV Report Generation Toolkit for Microsoft Office says "This VI or item belongs to a library that is expired or invalidly licensed"

I have downloaded the LV Report Generation Toolkit for Microsoft Office for evaluation with LabVIEW 2010. The examples for the Help get many errors, including "The subVI is not executable. You must fix all errors in the subVI before this VI can run." and "This VI or item belongs to a library that is expired or invalidly licensed".
I selected that I wanted to evaluate the toolkit instead of putting an activation code during installation. Installation went OK.
How can I get the examples in this LV Toolkit to Run so that I can evaluate it?
Solved!
Go to Solution.

Also when I place the MS Office Report function in my block diagram, I get: "Unable to View Properties" popup message and no Contextual Help on the function.
How can I get these RGT function to work properly so that I can evaluate the toolkit?

How do I put data into a template using the Labview report generation toolkit for Microsoft Office?

I am running Lookout 5.0 and have recently purchased the Labview Report Generation Toolkit for Microsoft Office to create reports from my Lookout logged data. Since I have never used Labview I am having my problems. I tried following the tutorials but they do not seem to be examples of what I want to do.
I log rainfall totals (1 spreadsheet)in Lookout from 40 different sites in 5 minute increments. I copy these totals and paste them into another spreadsheet which sums them up to give me hourly totals and then paste those totals into a spreadsheet for distribution.
In Labview I create a new report and use the distribution sheet as my template, but how do I complete
the steps of loading the raw 5 minute data into labview and then paste it into the hourly total spreadsheet and then transfer those totals into the distribution template?
I have been trying to figure this out for over a week, and I am getting nowhere.
Any response would be appreciated.
Thanks
Jason P
Jason Phillips

Lookout saves the files in .csv form which can be opened in Excel. I did make some progress by using the "append table to report" vi which allowed me to put values into an array and then those values were entered into my template on my report vi.
Where I am stuck now is I want to be able to put values into my template from a .csv file, not from an array I have to manually put numbers in.
Once those values are in my template I want to pull summed values from the template and place them into a final excel file for printing.
I have attached examples of the files I am working with to help you better understand what I am trying to do.
I hope that makes sense.
Jason Phillips
Attachments:
HourlyTotalsTemplate.xls ‏120 KB
eb_rain_gauge_ss.csv ‏23 KB
EastBankHourlyRainReport.xls ‏28 KB

Control checkbox form field in word with report generation toolkit for Microsoft office

Hi all,
Happy New Year!
I insert in the word template the check box form field. It has a bookmark name "Check1".
Now I'm trying to checked or unchecked this field using the report generation toolkit for Microsoft office and I couldn't. If anyone now how to do it? I'm using LabView 8.0
Thanks in advance,
Boris
Solved!
Go to Solution.

Boris,
The Microsoft Office Toolkit does not have support for checking/unchecking check box forum field. You would have to research the activex functionality that enables this to be checked or unchecked and then do the activex calls yourself. I did hear of one csutomer who used a special font to write a blank box or a checkbox into a word document and changed it that way as well.
Maybe http://www.ozgrid.com/forum/showthread.php?t=53715 gives a hint to an activex reference
Rob K
Measurements Mechanical Engineer (C-Series, USB X-Series)
National Instruments
CompactRIO Developers Guide
CompactRIO Out of the Box Video

National Instruments releases LabVIEW Report Generation Toolkit for Microsoft Office.

The new LabVIEW Report Generation Toolkit for Microsoft Office is a library of flexible, easy-to-use tools for programmatically creating and editing Microsoft Word and Excel reports from LabVIEW. Whether you need to generate reports summarizing manufacturing test results or compile process statistics to improve your production yields, this toolkit speeds your development of customized, professional reports.
To see examples of this toolkit or get more information please visit :
http://www.ni.com/labview/report_gen_toolkit.htm

It is a bit limiting though. I built my own set of VI's, a toolkit if you will, that does some of what this tookit does. But, I also wrote some functionality that isn't available in NI's kit, such as creating charts as separate worksheets and linking the charts to data on another worksheet. All in all, the toolkit is great, but you can't get as much out of it as you can using the ActiveX calls yourself.

Reporting annoying issues for the entire Microsoft website (MSDN, forums, all)

Is there any place where I can report bugs with how the Microsoft web sites behave? I can only find forums and "Microsoft Answers" categories about single products that Microsoft makes, but nothing about the infrastructure itself.
For about two weeks now, I am required to log into my account every few hours whenever I access any Microsoft website. This includes MSDN help content, forums, or other resources. I need to login after opening the website through F1 help in Visual Studio
as well as accessing a microsoft.com link from anywhere else like a web search or a direct link from web or an application.
Auto-complete does not work either. My browser (Firefox) does save the password, but it never fills it into the form. Other people have already noticed that
Microsoft applies some dirty tricks here. And even if the login is remembers for a moment, it's slow as hell. It takes a second or two to load the login.live.com page (which is not what I wanted to see), then it sits there for some more seconds before going
anywhere. Other login services like Google or StackOverflow manage to log me in all within one second and most of the time I don't even see it.
And then there's still that insecure SSL-to-non-SSL-submit warning that only occurs in other browsers then IE. Has anybody cared about that in the last couple years?! I'm not getting it now, probably because I'm not logged in anymore. It all slowly falls
apart, piece by piece. Next step is probably losing my data or not loading it at all.
THIS – IS – ANNOYING! And it really makes me feel like I don't want to use Microsoft products anymore (because even good desktop applications are connected to that silly website). I have opened a
Microsoft Connect ticket for a part of this issue (it's grown bigger since then), but this ticket is totally ignored. If microsoft.com went down, they'd certainly care within minutes or hours. This bug is not even regarded in
weeks!
So do I have to write a postal letter to the president of the whole company or do they have support staff for that?! Do they have anybody who is capable of maintaining their website? It's really frustrating how Microsoft has a web presence that is worse
than what our first-year trainees come up with. It's full of bugs and this is currently only the most relevant one. Do they even care about how the world sees them? Or is Microsoft currently preparing (and even failing) to move out of business?

The brandings are fun. Here's this same thread in a bunch of flavors:
https://social.technet.microsoft.com/Forums/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
https://social.msdn.microsoft.com/Forums/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
https://social.microsoft.com/Forums/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
https://social.technet.microsoft.com/Forums/sqlserver/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
https://social.msdn.microsoft.com/Forums/vstudio/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
https://social.technet.microsoft.com/Forums/exchange/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

LabVIEW Report Generation Toolkit for Microsoft Office 1.1.2

Where is possible to buy LabVIEW Report Generation Toolkit for Microsoft Office v1.1.2?
Thanks.
Francisco

You are right, the page does not say that but the local distributor says that I have to purchase an update to the latest version of LabView: about USD 1000. I can't believe that.

Why would Extension Manager CS6 report dependency issues for 29 InDesign CS6 factory plug-ins?

Suddenly Extension Manager CS6 is reporting dependency issues for 29 InDesign CS6 factory plug-ins. I made no changes to those plugins that might have precipitated this. Anyone have any ideas about what might have happened? (This is happening with Extension Manager 6.0.8.28 and InDesign 8.0.2.) Some examples of the plugins reported as not meeting dependency condition are the following:
   Book Panel (8.0.0.370)
   PDF (8.0.2.413)
   Snippet (8.0.0.370)
   XML (8.0.2.413)
   XMLParser (8.0.0.370)
Hayden

1. You only pasted one log file (log0.log?), there is another more important log file: ExtensionManager.log you dind't paste.
2. Have you removed ALL mxi files from ALL subfolders of BOTH "C:\ProgramData\Adobe\Extension Manager CS6\EM Store" AND "C:\Users\<UserName>\AppData\Roaming\Adobe\Extension Manager CS6\EM Store" to separate folder? If yes, Extension Manager shouldn't hang.
3. Please make sure you have "Full control" permission to ""C:\ProgramData\Adobe\Extension Manager CS6\Configuration\DB\ExMan.db" and "C:\Users\<UserName>\AppData\Roaming\Adobe\Extension Manager CS6\Configuration\DB\ExManUser.db". You can check it in "Security" tab page of "Properties" dialog box.

Report generation issue for headcount/workforce

Similar Messages

Maybe you are looking for