Report Generation Package not working

Hi all,
I installed the report generation package in labview 8.2. I need to read data from excel sheet. I am using the "Excel Get Data" vi. But there are always an error showing:
The polymorphic subVI is broken. You must fix all errors in the polymorphic subVI before this VI can run.
The example downloaded from ni.com has the same error. But this vi works very well in my friend's labview 7.0. Can anybody help me with this?
Thanks,
Gavin

NO what he did was install from another CD that had the same version of the toolkit.
Joe.
"NOTHING IS EVER EASY"

Similar Messages

The head phone jack on my brand new iPod touch 5th generation is not working properly

The head phone jack on my brand new iPod touch 5th generation is not working properly. It has sound without the headphones in but when I plug them in it has no sound, it's low, or poppy. I had only used my apple supplied headphones once before and it worked fine. I know it's not the headphones because I tried them on my girlfriends phone and they worked fine.

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iOS device. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar

VS2005 Crystal Report Print Report Button is not working on Windows 7 x64

Hi There,
My application is written in VS2005 C# on x86 machine. It runs smoothly on XP pro and Vista x86 machine.
I deployed the same to windows 7 x64 machine with CRRedist2005_x64.msi and found that the Print Report button is not working.
So, I re-compiled my application to x64 target platform, and reinstall the application to the same machine. But nothing changed. I have surf for answer over the web but nothing found.
Please help urgently. Any helps is much appreciated. Thks in advance.
Edited by: chanpyvivian on Mar 26, 2010 11:14 AM

I follow your instruction as below:
1) download the sample app vbnet_win_printtoprinter.zip to dev computer and compile it to .NET 2005.
- Run from my dev computer
- Click "Print Report" button
- Error message display - please see below
    The error was due to the default printer name hard coded in the program was not found. I have edited to my printer name and it can be printed out with no error.
2) Use a "saved data" report so that you do not have to worry about database logon.
can't find the "saved data", please elaborate
3) Then copy the exe to the 64 bit box and try to print using this sample app.
-do you mean copy the exe to the 64 bit computer for testing ?
ERROR Message
CrystalDecisions.CrystalReports.Engine.InvalidArgumentException:
Invalid printer specified. ---> System.Runtime.InteropServices.COMException (0x80000201):
Invalid printer specified.
   at CrystalDecisions.ReportAppServer.Controllers.PrintOutputControllerClass.ModifyPrinterName(String newVal)
   at CrystalDecisions.CrystalReports.Engine.PrintOptions.set_PrinterName(String value)
   at CrystalDecisions.CrystalReports.Engine.PrintOptions.Copy(PrintOptions src)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
   --- End of inner exception stack trace ---
   at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportClass.Load(String reportName, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.get_FormatEngine()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN)
   at PrintToPrinter.Form1.Button1_Click(Object sender, EventArgs e) in C:\Crystal\CRNET\vbnet_win_printtoprinter\vbnet_win_printtoprinter\Form1.vb:line 91
OK
Edited by: chanpyvivian on Mar 30, 2010 6:18 PM

The hold button on my ipod touch 3rd generation does not work and ipod randomly flashes on and off, asking if i want to restart it when no button has been pushed, any suggestions?

the hold button on my ipod touch 3rd generation does not work and ipod randomly flashes on and off, asking if i want to restart it when no button has been pushed, any suggestions?

it might be a malfunction in your device. you might ave to send it to repairation
1.ave you try resetting it or restoring it?
2. did your hold boutons whas working beffor?

He menu button of the ipod touch (4th generation) is not working and the service center of ipod is asking us to pay for the fixation of the said item even though it's still on warranty. this is the case number 215866894. And the service center said that t

he menu button of the ipod touch (4th generation) is not working and the service center of ipod is asking us to pay for the fixation of the said item even though it's still on warranty. this is the case number 215866894. And the service center said that they don't cover that center part of the ipod so they're asking us money before they can fix it. We bought the ipod last december 8, 2010 and we brought it to the service center last april, 2011 here in the philippines. And until now they're not fixing it because they're asking us to pay half the price of the item which is 8,040 pesos..

As advised, you need to call Apple about this.
http://support.apple.com/kb/HE57
No one here works for Apple (no one who will reply, anyway) so there's nothing anyone here can do to help you with this issue.
Good luck.

Hi. The buttons and wheel of my iPod 4th generation do not work. The hold button resets the iPod, and the shuffle shake works. The music plays by shuffling but I can't access albums etc due to the buttons and wheel not working.

Hi. The buttons and wheel of my iPod 4th generation do not work. The hold button resets the iPod, and the shuffle shake works. The music plays by shuffling but I can't access albums etc due to the buttons and wheel not working.

Did you restore from backup?
Next would be to restore to factory settings/new iPod since maybe you have some corruption in the backup

Need to re-install CS5.5 on my new hard drive. Serial number from disk package not working.

I need to re-install CS5.5 on my new hard drive. Serial number from disk package not working.

if there's a problem with the number of installations, you'll see a message about an excess activation problem.
if that's what you're seeing, contact adobe support for an activation count reset, https://helpx.adobe.com/contact.html
otherwise, attach a screenshot of the error message or quote it.

My Center button on my Ipod 3rd generation is not working? What do i do it still goes up and down just doesnt select anything.

My Center button on my Ipod 3rd generation is not working? What do i do it still goes up and down just doesnt select anything.

What I had to was backup my device's data to either iCloud or iTunes. Once it was backed up I erased all of my settings as if my iPad just came out of the box. You set it up again and it will asked you to either start as new, back up from iTunes, or back up from ICloud. If you want to see if everything works you can set up as new, otherwise just pick the choice depending on where you backed up your information. Eventually it will restore all of your information and your iMessage and FaceTime should be working. It worked for me, if you'd like more/better instructions let me know!!

My ipod nano 6th generation will not work connected to my car radio?

my ipod nano 6th generation will not work connected to my car radio? My wife's ipod nano 4th generation works perfectly.

Hey CorineNL,
If your iPod not recognized by iTunes or computer, I would follow the directions here:
Follow this troubleshooting assistant.
Also see these articles for further assistance:
iPod not recognized in 'My Computer' and in iTunes for Windows
iPod not recognized in iTunes and Mac desktop
from: iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/TS3474
Welcome to Apple Support Communities!
Best,
Delgadoh

My iPod 4th generation is not working

My Ipod 4th generation is not working. I do not know what happened. I was on it and then the screen turned like a black that was glowing. I pressed the home button and then it still wasnt working so I let it sit. I came back to it a few minutes later, and it had the turn ipod off screen, so I turned it off and now it wont turn back on!!! PLEASE HELP! -Thanks!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

SCCM 2012 Primary Site Recovery - Packages not working

I recently had to recover my Primary Site due to system crashes with blue screens on a daily basis. I was running ConfigMgr 2012 SP CU 3 and as part of the process I migrated from WS2008 R2 to WS2012 R2.
After many hours of perusing the web, I found the solutions to deal with the common site recovery issues such as SSL certs, and the content validation due to an empty ContentLib folder. I also had the issue with the update source where it listed the old
WSUS 3.2 server and the new one so the Site GUID was also updated.
The issue I am currently experiencing is that packages new or old including software update packages are not working. When using the script by Peter VanWoulde it lists the Deployment State as Error. I have tried redistributing them, valdiating the content,
removing distribution points, adding in new distribution points and even recreating some of the smaller packages to test but nothing is working.
Application deployments are working without issues.
This is the tail end of the WindowsUpdate.log file
2013-11-20 22:03:27:281 1632 a84 COMAPI >>-- RESUMED -- COMAPI: Search [ClientId = CcmExec]
2013-11-20 22:03:28:098 1632 a84 COMAPI - Updates found = 176
2013-11-20 22:03:28:098 1632 a84 COMAPI ---------
2013-11-20 22:03:28:098 1632 a84 COMAPI -- END -- COMAPI: Search [ClientId = CcmExec]
2013-11-20 22:03:28:098 1632 a84 COMAPI -------------
2013-11-20 22:03:32:139 1020 980 Report CWERReporter finishing event handling. (00000000)
This is the UpdatesDeployment.log file
Assignment {FD1118D2-563C-44D4-99DB-0CBE29C5C01A} has total CI = 432 UpdatesDeploymentAgent 21/11/2013 8:31:14 AM 4572 (0x11DC)
Deadline received for assignment ({FD1118D2-563C-44D4-99DB-0CBE29C5C01A}) UpdatesDeploymentAgent 21/11/2013 8:31:14 AM 4572 (0x11DC)
Detection job ({F5229872-7A7E-4692-B709-63989F708AF0}) started for assignment ({FD1118D2-563C-44D4-99DB-0CBE29C5C01A}) UpdatesDeploymentAgent 21/11/2013 8:31:14 AM 4572 (0x11DC)
Progress received for assignment ({FD1118D2-563C-44D4-99DB-0CBE29C5C01A}) UpdatesDeploymentAgent 21/11/2013 8:31:26 AM 4572 (0x11DC)
EnumerateUpdates for action (UpdateActionInstall) - Total actionable updates = 0 UpdatesDeploymentAgent 21/11/2013 8:47:50 AM 3588 (0x0E04)
EnumerateUpdates for action (UpdateActionInstall) - Total actionable updates = 0 UpdatesDeploymentAgent 21/11/2013 8:47:51 AM 3588 (0x0E04)
EnumerateUpdates for action (UpdateActionInstall) - Total actionable updates = 0 UpdatesDeploymentAgent 21/11/2013 8:47:55 AM 3588 (0x0E04)
EnumerateUpdates for action (UpdateActionInstall) - Total actionable updates = 0 UpdatesDeploymentAgent 21/11/2013 8:47:55 AM 2908 (0x0B5C)
At this point I am running out of ideas of where to look.

Hi Xin,
Sorry for not responding earlier but I did recover the site using the guidelines in the following article Backup and Recovery in Configuration Manager,
however there were a few issues.
I did not have a ContentLib backup so all the content had to be redistributed and validated before that worked. None of my packages new or old would work. I eventually found an article from a forum member who also initiated a Site Reset as part of their
recovery process and had no issues.
So it seems that any packages are still not working and i think I narrowed it down.
For some reason even though my DP and MP are all set for HTTPS, it is trying to access the HTTP path for SMS_DP_SMSPKG$. I am using PKI certs so this is the correct path but it should be HTTPS.
Excerpt from log.
Retrying DoUpdateSourceListAll task SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)
Product {16A45552-A143-4EE6-8CA4-8D95FB5EEB7E} is installed for user SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)
Adding 2 local DPs and 0 remote DPs for product {16A45552-A143-4EE6-8CA4-8D95FB5EEB7E} SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)
Adding install source C:\Windows\ccmcache\5l\ to source list for product {16A45552-A143-4EE6-8CA4-8D95FB5EEB7E} SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)
UpdateURLWithTransportSettings(): OLD URL - http://xxxxx.com/sms_dp_smspkg$/p01000ae SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)
UpdateURLWithTransportSettings(): HTTP requested but client settings prohibit it. SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)
Failed source list update for product {16A45552-A143-4EE6-8CA4-8D95FB5EEB7E}, error 87d00226 SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)
DoUpdateSourceListAll task failed, error code 87d00226 SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)
Source list update task failed, will be retried after 3600 seconds SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)
MSI update source list task finished successfully SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)

My Labview Report generator is not working with 2013 excel version

Hi All,
My report generator tool kit which was developpend using labview 2011 was workign with excel 2010...after that i installed 2013 excel and the code is not working..
Do i need to enable some setting to work with excel 2013.
Basically this generator tool will copy the charts from excel and paste in power point...Please let me know.
Thanks,
Hareesh

Ah, I understand now - I had assumed you were using the NI Toolkit.
If you're not using the report generation toolkit, did you write your own VIs for communicating with Office or are you using a different toolkit? If you're using ActiveX to communicate with Office it may be that the ActiveX API has changed for Office 2013 - you will probably need to modify your program for the new calls.
Since it wasn't as obvious as I thought with the report generation toolkit, it would help if you posted some code to try and understand what might be happening. Are you getting any errors in your application when you try to use Office 2013?
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets

MS office report function does not work after building the appication

I use the MS office report function with a custom excel template my application.
It works properly in de developstate, but after building the application it does not work .
I use office 2000 and Windows XP

jmq wrote:
I use the MS office report function with a custom excel template my application.
It works properly in de developstate, but after building the application it does not work .
What error message if any did you get? It could be a couple things:
1. Did you include the Report Toolkit's dynamic vis in the app's build process?
Ref: Error 7 when Running an .EXE Using VIs from Report Generation Toolkit for MS Office
2. How are you giving the path to you custom template, as a relative or an absolute path? The path will be different for the .exe. You have to strip twice.
Ref: Why Can't My Executable Load My Included File When I Use Relative Path Encoding?
=====================================================
Fading out. " ... J. Arthur Rank on gong."

Excel report generation does not exit excel

I am using the excel report generator to save test reports. I can create the report using a template and write to it when needed with no problems. After every test step I add data and save the report. I keep excel closed by using the no change setting for the window state. I do not want the user to see excel or even know it is there.
The issue is when I am done testing and use the dispose report vi, it leaves an instance of excel open that you can see in the task manager. And the only way to close that instance is to open one of the files that was created and close it and then exit excel. The memory used by that instance grows a little each time a new file is created.
Labview 2011 SP1 (11.0.1.F2 32bit)
Excel 2007
How can I close excel completely after each test?
Solved!
Go to Solution.
Attachments:
Report Example.png ‏52 KB

I find it very hard to believe that this function isn't somewhere in the report generation toolkit. But my 30 second look for it came up with nothing. So instead I wrote a function that does a task kill for you. Keep in mind this only works in Windows, and this will do the same thing as a end task in Taskmanager so only use it when you are sure your are done saving all reporting. Saved in 2011.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.
Attachments:
Taskkill Excel Report.vi ‏22 KB

TAB functionality in Report Generation doesn't work.

Inserting TABS either by putting in a string or concatenating with the TAB constant doesn't seem to work. In the HTML file created by "Example HTML Report.vi" there are supposed to be two tabs in the text but they don't seem to be there. I'm trying to perodically insert data into tab delimited columns in a report. I'm using LabView 6i on Win2000.

I don't know much about HTML but I haven't found a tag for TAB by looking at a few WEB sites. And yet..there's a "Set Report Tab Width.vi" in the Report Generation sub-pallette. The "Append Report Text.vi" has a sub-vi called "HTML Report Token Converter.vi". When it gets the tag it sends a
, which I believe is a HTML line break. Not exactly equivalent to a TAB as far as I can see. If you can't send a TAB to HTML why set the TAB Width? So it seems the problem isn't with the example it's with the implementation of the Report Generation sub-pallette. Maybe the Report Generation utilities were developed for an older version of HTML and need to be updated. When I "View Source" on the HTML document that's being created, I get "-//W3C//DTD HTML 4.0
Transitional//
USAYPG
4221Z Met Data
Wednesday, June 19, 2002
1:28:04 PM
Test of Report Generation
Item Item Item Item Item
Time
Temp
Humidity
Pressure
1.00
2.00
3.00
4.00
101.00
102.00
103.00
104.00
Don't know if this will help or not.

Report Generation Package not working

Similar Messages

Maybe you are looking for