Report generation: server execution failed
the app has been running for months. IS dept just upgraded machines and software. NT4.0 is now Win2000 and Office 97 is now Office2000. Report generation tool kit is not happy. Even running NI examples I get error -2146959355 server execution failed in Font Style.vi
Lawrence M. David Jr.
Certified LabVIEW Architect
cell: 516.819.9711
http://www.aleconsultants.com
[email protected]
Searching the Microsoft's web site, I found some info on this error:
If you have never had Norton AntiVirus installed on your computer, follow the following instructions:
1. Open up the specific VI causing Error �2146959355
2. Recompile this VI by pressing the Run arrow while holding down the CTRL and SHIFT keys
3. Go to File � Save All
4. Run the VI
If you are using Norton AntiVirus 2000 with Microsoft Word 2000, follow these instructions:
Note: This information was provided by http://support.microsoft.com. Please use these instructions at your own risk.
1. Select Start � Run
2. If Norton AntiVirus is installed as a stand alone application, type:
regsvr32 -u "c:\program files\norton antivirus\officeav.dll"
If this is successful, you will receive:
DllUnregisterServer in C:\Program Files\Norton AntiVirus\OfficeAV.dll succeeded.
If Norton AntiVirus is installed as a component of SystemWorks, type:
regsvr32 -u "c:\program files\norton systemworks\norton antivirus\officeav.dll"
If this is successful, you will receive:
DllUnregisterServer in C:\Program Files\Norton Systemworks\Norton AntiVirus\OfficeAV.dll succeeded.
3. Click OK
Microsoft notes that in some cases you must rename the oleaut32.dll and reinstall Office 2000. Renaming oleaut32.dll usually requires that you boot your computer in MS-DOS mode.
- Navigate to the directory where oleutt32.dll is located (usually C:\windows\system32) using the cd DOS command.
- Type: rename oleaut32.dll renamed_oleaut32.dll and press Enter
- Reinstall Microsoft Office
Note: This problem seems to still exist with Office 2002.
1. Unfortunately, this is how the activeX works. If Microsoft changes the activeX objects from one Office version to another, the executable built with Office97 will not work with Office2000. You will have to recompile your VI into the executable on a machine with Office2000 and toolkit configured for this version.
2. For the error "server execution failed" with Text Report Example, select File � VI Properties. Select "Execution" from the category box and set the "Preferred Execution" to user interface. This should solve the problem.
Zvezdana S."
Similar Messages
-
Error -2146959355 server execution failed on ActiveX Invoke Node?
I wrote a VI to reload all the module prototypes
of the steps in a TestStand sequence (note: all code modules are
LabView VI's). Whenever it gets to the LabViewModule.LoadPrototype
call, I get a "server execution failed" error (error code -2146959355).
I've tried solutions 1-3 in the following document to no avail:
Why Do I Get Error -2146959355 When Using ActiveX or the Report Generation Toolkit?
http://digital.ni.com/public.nsf/allkb/1c025f018cb5761686256c56007dd258
Any ideas as to what else I can do?
(Incidentally,
if anyone has a clue as to what reference is causing a "References to
PropertyObjects were not released properly" warning dialog... please do
say).
Thanks,
Melissa
(double-posted this to the TestStand forum in case different people read the 2 boards...)
Attachments:
ReloadAllPrototypes.vi 104 KBHi Melissa,
I think it would be a better option for you to perform this task in TestStand. See the attached example that is tested and works on reloading LabVIEW module prototypes.
Hope this helps!
Best Regards
Jonathan N.
National Instruments
Attachments:
getSequenceFilePath.vi 41 KB
reloadLabVIEWPrototypes.seq 59 KB -
Excel ActiveX: Server Execution Failed Error
I'm using my own ActiveX VIs to control Excel. I take a text file and create a chart from some of the columns, then print the chart. I'm getting a "server execution failed" error when I call PrintOut on the chart object. I understand this error stems from the fact that I'm developing on Excel 2007 and testing on 2003, but upgrading all of the computers that will use this software is not going to happen.
I've fixed all other incompatibilities between versions, and the chart is created correctly, but when the PrintOut method is reached, I get the error. Has anyone ran into this and worked around it? Is my only solution to downgrade my machine to Office 2003?Here's a few details on that particular error, both of these articles have some workarounds:
Error -2146959355 When Using ActiveX or the Report Generation Toolkit
Error 2146959355 When Running Exe on Machine With Different Version of Office
Tim W.
Applications Engineering
National Instruments
http://www.ni.com/support -
Virtual Machine Failes to Start: Server execution failed (0x80080005).
Hi
I have a Windows 8.1 (with updates) System which was upgraded from Windows 8.0 using a Clean Install. Recently Hyper-V has stopped running on my system.
The Event log shows an error:
'CentOS65' failed to start worker process: Server execution failed (0x80080005). (Virtual machine ID 9EF5529D-3755-40B3-AC6A-325A564D19BB)
- System
- Provider
[ Name] Microsoft-Windows-Hyper-V-VMMS
[ Guid] {6066F867-7CA1-4418-85FD-36E3F9C0600C}
EventID 15500
Version 0
Level 2
Task 0
Opcode 0
Keywords 0x8000000000000000
- TimeCreated
[ SystemTime] 2014-07-17T07:57:28.568965100Z
EventRecordID 302
Correlation
- Execution
[ ProcessID] 4040
[ ThreadID] 1396
Channel Microsoft-Windows-Hyper-V-VMMS-Admin
Computer viveksasmung
- Security
[ UserID] S-1-5-18
- UserData
- VmlEventLog
VmName CentOS65
VmId 9EF5529D-3755-40B3-AC6A-325A564D19BB
ErrorMessage %%2148007941
ErrorCode 0x80080005
The WMI-Activity log shows the error:
Id = {00000000-0000-0000-0000-000000000000}; ClientMachine = VIVEKSASMUNG; User = viveksasmung\Vivek; ClientProcessId = 9756; Component = Core; Operation = Start IWbemServices::ExecNotificationQuery - root\virtualization\v2 : select * from __InstanceDeletionEvent
within 2 where TargetInstance ISA 'Msvm_ComputerSystem' ; ResultCode = 0xC7F0FCD0; PossibleCause = Could not send status to client
The Hyper-V-VMMS Admin Log shows the error:
The worker process for virtual machine 'CentOS65' failed to respond within the startup timeout period and was restarted. (Virtual machine ID 9EF5529D-3755-40B3-AC6A-325A564D19BB)
'CentOS65' failed to start. (Virtual machine ID 9EF5529D-3755-40B3-AC6A-325A564D19BB)
The Hyper-V Worker Log shows the error:
The Virtual Machine Worker Process has lost its connection to the root\virtualization WMI namespace: General access denied error (0x80070005). As a result, some WMI operations may not function correctly. To correct the problem, try restarting the Windows
Management Instrumentation service.
I set the Hyper-V Tracing to ON using vmconnect.config
file and the error log is as follows:
Tracing Hyper-V Client version: 6.3.0.0. Rough build date (virtman file written): 05/18/2014 23:25:02
2014-07-17 01:55:28.990 [08] USER_ACTION_INITIATED VMBrowser ServerNode:ConnectToServer() Connecting to server localhost...
2014-07-17 01:55:29.008 [08] USER_ACTION_COMPLETED VMBrowser ServerNode:ConnectToServer() Successfully connected to server.
2014-07-17 01:55:29.463 [07] WARNING VirtMan WmiAssociation:GetRelatedObjects() The WMI object 'Msvm_RdvComponentSettingData' + could not be mapped to VirtMan type so ignore it.
2014-07-17 01:55:33.001 [03] USER_ACTION_INITIATED VMBrowser ServerNodeViewControl:OnStartVm() Starting VM(s)...
2014-07-17 01:55:33.023 [09] USER_ACTION_INITIATED VMBrowser VMActionBatchPerformer:Perform() Changing virtual machine '9EF5529D-3755-40B3-AC6A-325A564D19BB' ('CentOS65') state from 'PowerOff' to 'Running'
2014-07-17 01:59:33.927 [12] ERROR VirtMan ThrowHelper:ThrowVirtualizationOperationFailedException() Operation 'SetState' failed with message ''CentOS65' failed to start.'.
Error code '32768'.
Detailed message ''CentOS65' failed to start. (Virtual machine ID 9EF5529D-3755-40B3-AC6A-325A564D19BB)
'CentOS65' failed to start worker process: Server execution failed (0x80080005). (Virtual machine ID 9EF5529D-3755-40B3-AC6A-325A564D19BB)'.
2014-07-17 01:59:33.930 [12] ERROR VMBrowser VMActionBatchPerformer:OnTaskCompleted() Tracked task operation failed!
'CentOS65' failed to start.
at Microsoft.Virtualization.Client.Management.ThrowHelper.ThrowVirtualizationOperationFailedException(String errorMsg, String errorDescriptionMsg, VirtualizationOperation operation, Int64 errorCode, Boolean operationCanceled,
ErrorCodeMapper mapper, Exception innerException)
at Microsoft.Virtualization.Client.Management.View.EndMethodReturnInternal(IVMTask task, VirtualizationOperation operation, Boolean affectedElementExpected)
at Microsoft.Virtualization.Client.Management.VMComputerSystemBaseView.EndSetState(IVMTask setStateTask)
at Microsoft.Virtualization.Client.VMBrowser.ChangeVMStatePerformer.EndTrackedTask(IVMTask task)
at Microsoft.Virtualization.Client.VMBrowser.VMActionBatchPerformer.OnTaskCompleted(Object sender, EventArgs e)
2014-07-17 01:59:46.103 [03] USER_ACTION_INITIATED VMBrowser ServerNode:DisconnectFromServer() Disconnecting from server localhost...
2014-07-17 01:59:46.104 [03] USER_ACTION_COMPLETED VMBrowser ServerNode:DisconnectFromServer() Server had been disconnected successfully.
Upon using BCDEdit, output is below
Windows Boot Manager
identifier {bootmgr}
device partition=\Device\HarddiskVolume1
path \bootmgr
description Windows Boot Manager
locale en-GB
default {current}
resumeobject {37225af7-cc62-11e3-8277-806e6f6e6963}
displayorder {current}
{3ce506e4-cc90-11e3-8b9f-8a809d5a6432}
timeout 30
Windows Boot Loader
identifier {current}
device partition=C:
path \Windows\system32\winload.exe
description Windows 8.1 Pro with Media Center
locale en-GB
recoverysequence {3ce506df-cc90-11e3-8b9f-8a809d5a6432}
recoveryenabled Yes
osdevice partition=C:
systemroot \Windows
resumeobject {37225af7-cc62-11e3-8277-806e6f6e6963}
bootmenupolicy Legacy
hypervisorlaunchtype Auto
quietboot No
Real-mode Boot Sector
identifier {3ce506e4-cc90-11e3-8b9f-8a809d5a6432}
device partition=C:
path \Hd0Par3.pbr
description Ubuntu LTS 14.04
I have set permissions to the VHD folder using the command below
icacls "c:\CentOS65\CentOS65" /grant "CREATOR OWNER":(OI)(CI)(IO)F
icacls "c:\CentOS65\CentOS65" /grant "NT AUTHORITY\SYSTEM":(OI)(CI)F
icacls "c:\CentOS65\CentOS65" /grant "NT VIRTUAL MACHINE\Virtual Machines":(RC,S,GR,RD,WD,AD,REA,RA)
icacls "c:\CentOS65\CentOS65" /grant "NT VIRTUAL MACHINE\Virtual Machines":(CI)(IO)(GR,WD,AD)
icacls "c:\CentOS65\CentOS65\Virtual Hard Disks" /grant "NT VIRTUAL MACHINE\Virtual Machines":(RC,S,GR,RD,WD,AD,REA,RA)
icacls "c:\CentOS65\CentOS65\Virtual Hard Disks" /grant "NT VIRTUAL MACHINE\Virtual Machines":(CI)(IO)(GR,WD,AD)
icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOSHome.vhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(RC,S,GR,GW,RD,WD,AD,REA,WEA,RA,WA)
icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOS65.vhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(RC,S,GR,GW,RD,WD,AD,REA,WEA,RA,WA)
icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOSHome_9E7FEF2E-85E0-4278-AABD-01D5E45EE643.avhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(RC,S,GR,GW,RD,WD,AD,REA,WEA,RA,WA)
icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOS65_28FF0E50-0FBA-4754-A4CC-B3DAEC7E3DAA.avhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(RC,S,GR,GW,RD,WD,AD,REA,WEA,RA,WA)
icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOSHome.vhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(RC,S,GR,GW,RD,WD,AD,REA,WEA,RA,WA)
icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOS65.vhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(RC,S,GR,GW,RD,WD,AD,REA,WEA,RA,WA)
icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOS65.vhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(F)
icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOSHome.vhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(F)
icacls "C:\CentOS65\CentOS65\Virtual Machines\9EF5529D-3755-40B3-AC6A-325A564D19BB.xml" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(F)
I am unable to create new VMs as well.
I have already run
sfc/ scannow
DISM
Already Tried disabling the antivirus
Upon using wbemtest and connecting to root\virtualization, I am able to click Enum Classes > Recursive
Kindly suggest how to get HyperV working please. Any help (short of reinstalling /resetting windows) would be much appreciated.
Warm Regards,
Dr Vivek GuptaHi,
The key point would be this:
The Virtual Machine Worker Process has lost its connection to the root\virtualization WMI namespace: General access denied error (0x80070005).
Please open MMC, add Component Services snap-in:
Component Services -> Computers -> My Computer -> DCOM Config -> Windows Management Instrumentation -> Right Click, Properties -> Security “Launch and Activation Permission” -> Edit -> gave Authenticated Users
Full Control
Check the result.
Alex Zhao
TechNet Community Support -
Windows Media Player in Windows 8 Pro-64 Bit - Server Execution Failed
I'm running Windows 8 Pro - 64bit. I have also installed Windows Media Center add-on.
Windows Media Player returns an error "Server Execution Failed" when attempting to load any non-music media file, such as .avi, .mp4, .wmv, etc. These files open and play properly in the base Windows 8 "app" Video, and in Windows Media Center.
WMP opens OK from a desktop shortcut and updates it's music libraries. It plays all types of audio-only media files properly.
I have tried all the various "fixes" for various versions of Windows and WMP including removing WMP as a feature, rebooting and "re-installing" it as a feature... I've run regserv.dll, etc. all to no avail...
I just want WMP to be the default "media" player for all standard file types...
Anyone have any suggestions... ?
Thanks... MTGBYou can try the following suggestions.
Method 1.
1. Control Panel -> Administrative Tools -> Services. Find the Windows Media Player Network Sharing Service, stop it temporarily.
2. Close Windows Media Player 12 if it is started.
3. input %USERPROFILE%\Local Settings\Application Data\Microsoft\Media Player\ to Windows Explorer to find the folder.
4. Move all files in the folder to another place as a backup. Move files in the specific folder will reset database.
5. Restart service and Windows Media Player to check the result.
Method 2.
1. Open command prompt with Admin.
2. In the command prompt type the following command
net localgroup "Administrators" "NT Authority\Local Service" /add
3. Restart the computer to check the result.
Niki Han
TechNet Community Support -
A MSFT asked me to post here and here is a link to my original post and some troubleshooting already done.
http://social.technet.microsoft.com/Forums/en-US/w7itprogeneral/thread/8669451c-772e-4bb4-91b0-9b089bf5c2cd/
My original first post in that forum:
Running a Sony VGN-NS140E laptop with Windows 7 Home Premium x64. This was a "clean" install versus an upgrade install. When I try to "Set up backup" under "Backup and Restore" I get an error "The backup application could not start due to an internal error: Server execution failed(0x80080005)". I am running Comodo x64 Internet Security (Firewall, AntiVirus, AntiSpyware) and am not running a system registry cleaner or optimizer in the background, although I have run CCleaner as a registry cleaner in the past. I do not know if this is a new or old problem as this is the first time I tried to use Windows Backup. I did try starting both Volume Shadow Copy service and Microsoft Software Shadow Copy Provider service , they both successfully started but Windows Backup still produces this error. Thank you in advance for your help.
Problem still occurs, thanks for your interest.Hello,
Can you please zip the folder %windir%\logs\WindowsBackup and send it to [email protected] (Use the highlighted part only) for analyzing the problem. Please keep the subject of the email same as this thread for easy tracking.
Thanks,
Bikash Agrawala [MSFT]
--------------------------------------------------------------------------------- This posting is provided "AS IS" with no warranties, and confers no rights -
No Network - Server Execution failed
I have a laptop connected to my domain runing windows 7. Everything works great until the laptop is no longer connected to my windows domain network. Once the laptop has been disconnected from the domain network i cannot run programs that relie on explorer.exe to run i get Server Execution Failed error. I have tried adding NT AUTHORITY\LOCAL SERVICE to the user group Administrator, this has done nothing.
The problem has to do with having a shell folder (like Documents/Pictures/Music/Videos/etc) mapped to a network location, and that location is (temporarily or permanently) unmapped. For example:
In my environment, I map P: to \\server\users\username so that I can use Group Policy to map their Documents/etc shell folder to P:\Documents (etc).
This usually works GREAT, except that for laptop users that take their computers home and haven't connected to the domain via VPN or other method, the P:\ drive doesn't get mapped when the domain is unavailable at login.
This triggers the error, and the proof is that when I temporarily map the P:\ drive to, let's say, \\computername\c$ the issue immediate goes away.
I view this as a significant bug for corporate users and administrators, because I now have to either wait for a fix before deploying Windows 7 in my environment OR drastically change how my mobile users store their documents so that they're always accessible to them.
I'm in the process this week of evaluating viable work-arounds, so I'll bookmark this and post my findings here in the hopes it will help others.
I've spent quite a bit of time on this and can confirm that it is an issue based on the summary I made above. The issue seems to be that it's annoyed that the user's critical shell folders are unavailable.
The easiest solution is to use Group Policy to redirect any profile folders to UNC paths instead of static mapped drive paths (ie. \\server\share\user\Documents instead of P:\Documents). Then, enable Offline files synchronization if you need the files to be available while the network is not available. -
Everytime I open control panel, screen res, personilzation, windows media player, explorer, I get server execution failed explorer.exe I do not want to reset my computer. I am running Windows 8.1 64 bit.
Hi,
Have you make any change to your system before this problem occures?
In my opinion, this problem probably caused by malware, you can try to use AV app scan your system firstly to fix the problem.
Besides this, can you open Event Viewer? If you can, please check if it identify this events and post the detailed information here.
To be simple, you can try to use System restore to revert your system to a former normal time point for test to fix it.
If these method no use, please feel free let me know.
Roger Lu
TechNet Community Support -
This is the error that we get when we run the Tag File.
ERROR 04/16/2004 02:26:15 PM Server ERROR from Server: National Instruments.OPCLookoutDrivers. Status: -196608, Server Message: Unable to load server - system error code: 0x80080005, CO_E_SERVER_EXEC_FAILURE: Server execution failed.
What does it all mean?ACRE,
this looks like the Industrial Automation OPC Server (Lookout OPC) is not correctly installed or configured and therefore the DSC Tag Engine - as OPC client - cannot launch the OPC server correctly.
Two checks I have in mind.
- Installation check: Check if the Industrial Automation Server is installed and configured correctly and that you will have a .lpd file as default. Could it be that the .lpd file is corrupted? BTW - what kind of protocol are you using and did you configure aliases for the LPD object? A good resource on checking the configuration might be the online help of Industrial Automation Server (Lookout Protocol Drivers) or the link penDocument>How Do I Configure My Devices with Lookout Protocol Drivers?
- Access rights, COM/DCOM problems: Can you launch the OPC Server with another OPC client? Is your OPC server running locally? If you don't know how to check on this I found a good KB Tools for Troubleshooting OPC Interface Problems E.g. can you access it with Server Explorer?
Last question... did you encounter this problem recently while it was working before? What changes have been done on your system?
Let us know if you have some questions and I hope some of the links help you further troubleshooting this issue.
Roland -
Backup Error "Server execution failed (0x80080005)"
Is there an answer to this problem yet?
Is there a correction to the underlying bug which "seems" to be that ownership of certain system files is being changed by the system? I only take that from some of the attempts at answers which seemed not to work. The last effective comment I
can find is that the bug is being investigated, but as the initial report was in 2010 and there is still no apparent answer, will there be one soon?
Have I missed something? Is the proper answer in a thread not covered by the above links?
I note that the backup system in Windows 8 seems to be a major revision. Has the Windows 7 backup system been abandoned?
DaveHi,
Regarding to the ownership, did you mean the owner for folder "System Volume Information" under system drive which was disscussed in this thread
http://social.technet.microsoft.com/Forums/en-US/29bd3fc9-9538-4d82-9b13-96263c4f2f73/starting-windows-7-backup-server-execution-failed0x80080005-?forum=windowsbackup
If you have already set the owner of the folder to "system" and give full permissions and issue presists. I suggest you return your system to a previous point if you have a restore point, check whether the issue persists.
In Windows 8, there is a option "Windows 7 File Recovery" in Control Panel\All Control Panel Items which has the same function as "Backup and Restore" in Windows 7.
Yolanda Zhu
TechNet Community Support -
OFM 11 Configuration Err: Creating Reports Tools + Server Components Failed
I was encountered with this error during Configuring the OFM 11.1.1.3.0 Linux 64
Creating Reports Tools Components Failed
Creating Reports Server Components Failed
Executing: opmnctl startproc ias-Components
I restart the wls and the admin server and all managed servers in the ClassicDomian too many times and problem still persists
I search this forum and other sites before posting this thread
my machine specification is over VMware 7 on Windows 7 x64 as following:-
1- Oracle Enterprise Linux 5.5 x64
2- Database 11g 11.2.0.1.0 x64
3- wls1033_generic x64
4- OFM 11.1.1.3.0 x64
I didn't install Portal neither OID
Can I Configure these Components Manually after fininshing the Installation ?Hello Hans. Did you ever find a resolution to this problem? I'm encountering the same issue and cannot find much information online pertaining to this problem. Can you tell me if you found a solution or any useful posts pertaining to this problem?
Thanks,
Pablo -
Windows 7 Media Player - Server execution failed
LOOK... I've tried "1. Click Start Button, type "cmd" in the search bar. The CMD icon will appear in the Start Menu."
"2. Right click the CMD icon and click "Run as administrator". Yeah right, The window that opened is a "User Account Control". It reads; Do
you want to allow the following program to make changes to to this computer?"
3. In the popup window, type the following command line and press Enter. There is NO PLACE TO TYPE ANYTHING IN. See Step 2.
I have a lot of Legal Video Evidence in/on this Computer... I can't afford to lose ANY of it.
I know it's going to take days to get an answer.Log in as the Administrator.
Close Windows Media Player.
In the Start Search box type in:
services.msc and hit the Enter Key.
Scroll down to Windows Media Player Network Sharing Service (WMPNetworkSvc).
Click on Log On tab.
Change the log on to Local System account.
Click OK/Apply.
Now recheck the issue.
S.Sengupta, Windows Entertainment and Connected Home MVP -
Hi ,
We are trying to implement the Endeca Logging and Report Generation in our application. I have followed LogServerReportGen.pdf provided by Endeca.
1. We implemented logging API calls in our code.
2. Created a logserver component in Workbench and specified all the neccessary details
3. Created a report generation componentin Workbech
When i am trying to start the Report Generation component its failing, i am not able to figure out what is the problem here.
Aslo do we need to develop and new script and provision it in workbech for Generating report ? How this report generation works.
Can some one list out what i am missing ?
Thanks
DEVHi Praving,
I tried to run it from scripts tab in Workbench admin console. It ran fine without any failures
What i am seeing in the view reports tab is empty all 0 values.... but we could see lot of our call recorded in Logserver output files... somewhere the connection between them is missing. I just used the existing logserver and report generation scripts provided OOB from Endeca.
I havenet logged the key SESSION_ID in loggin calls, will it matter, do you see this as the reasong.
The below is the logserver output I could see
H2012_12_17.10_02_27{version=3.5}
L2012_12_17.10_14_10{DIMS=By Fulfilment Type,DVALS=/By Fulfilment Type/Both,ENE_TIME=210,NUMREFINEMENTS=1,NUM_RECORDS=29,PAGE_TIME=0,TYPE=UNKNOWN}
L2012_12_17.10_14_29{DIMS=By Fulfilment Type,DVALS=/By Fulfilment Type/Both,ENE_TIME=260,NUMREFINEMENTS=1,NUM_RECORDS=11,PAGE_TIME=10,SEARCH_KEY=all,SEARCH_MODE=mode+matchany,SEARCH_TERMS=Cakes,TYPE=S}
L2012_12_17.10_14_45{AUTOCORRECT_TO=cakes,DIMS=By Fulfilment Type,DVALS=/By Fulfilment Type/Both,ENE_TIME=100,NUMREFINEMENTS=1,NUM_RECORDS=11,PAGE_TIME=0,SEARCH_KEY=all,SEARCH_MODE=mode+matchany,SEARCH_TERMS=Cakys,TYPE=S}
L2012_12_17.10_15_04{DIMS=By Fulfilment Type,DVALS=/By Fulfilment Type/Both,ENE_TIME=70,NUMREFINEMENTS=1,NUM_RECORDS=4,PAGE_TIME=0,SEARCH_KEY=all,SEARCH_MODE=mode+matchany,SEARCH_TERMS=Wine,TYPE=S}
L2012_12_17.10_15_22{DIMS=Wine%2CBy Fulfilment Type,DVALS=/Wine/Wine%2C/By Fulfilment Type/Both,ENE_TIME=40,NUMREFINEMENTS=2,NUM_RECORDS=4,PAGE_TIME=0,TYPE=SN}
L2012_12_17.10_15_49{DIMS=Wine%2CBy Fulfilment Type,DVALS=/Wine/Red%2C/By Fulfilment Type/Both,ENE_TIME=40,NUMREFINEMENTS=2,NUM_RECORDS=4,PAGE_TIME=0,TYPE=SN}
L2012_12_17.10_16_53{DIMS=Wine%2CBy Fulfilment Type,DVALS=/Wine/Red%2C/By Fulfilment Type/Both,ENE_TIME=130,NUMREFINEMENTS=2,NUM_RECORDS=0,PAGE_TIME=0,TYPE=SN}
L2012_12_17.10_17_06{DIMS=Wine%2CBy Fulfilment Type,DVALS=/Wine/Red%2C/By Fulfilment Type/Both,ENE_TIME=110,NUMREFINEMENTS=2,NUM_RECORDS=0,PAGE_TIME=0,TYPE=SN}
L2012_12_17.10_17_20{DIMS=By Fulfilment Type,DVALS=/By Fulfilment Type/Both,ENE_TIME=80,NUMREFINEMENTS=1,NUM_RECORDS=0,PAGE_TIME=0,SEARCH_KEY=all,SEARCH_MODE=mode+matchany,SEARCH_TERMS=Strawberry,TYPE=S}
L2012_12_17.10_17_31{DIMS=By Fulfilment Type,DVALS=/By Fulfilment Type/Both,ENE_TIME=160,NUMREFINEMENTS=1,NUM_RECORDS=0,PAGE_TIME=0,SEARCH_KEY=all,SEARCH_MODE=mode+matchany,SEARCH_TERMS=Lemon,TYPE=S}
L2012_12_17.10_17_42{DIMS=By Fulfilment Type,DVALS=/By Fulfilment Type/Both,ENE_TIME=81,NUMREFINEMENTS=1,NUM_RECORDS=9,PAGE_TIME=0,SEARCH_KEY=all,SEARCH_MODE=mode+matchany,SEARCH_TERMS=Red,TYPE=S}
L2012_12_17.10_18_00{DIMS=By Fulfilment Type,DVALS=/By Fulfilment Type/Both,ENE_TIME=80,NUMREFINEMENTS=1,NUM_RECORDS=2,PAGE_TIME=0,SEARCH_KEY=all,SEARCH_MODE=mode+matchany,SEARCH_TERMS=Occasion,TYPE=S}
L2012_12_17.10_18_14{DIMS=By Fulfilment Type,DVALS=/By Fulfilment Type/Both,ENE_TIME=110,NUMREFINEMENTS=1,NUM_RECORDS=1,PAGE_TIME=0,SEARCH_KEY=all,SEARCH_MODE=mode+matchany,SEARCH_TERMS=Basket,TYPE=S}
L2012_12_17.10_18_31{DIMS=By Fulfilment Type,DVALS=/By Fulfilment Type/Both,ENE_TIME=140,NUMREFINEMENTS=1,NUM_RECORDS=3,PAGE_TIME=1,SEARCH_KEY=all,SEARCH_MODE=mode+matchany,SEARCH_TERMS=Blooms,TYPE=S}
L2012_12_17.10_19_51{DIMS=By Fulfilment Type,DVALS=/By Fulfilment Type/Both,ENE_TIME=30,NUMREFINEMENTS=1,NUM_RECORDS=3,PAGE_TIME=0,SEARCH_KEY=all,SEARCH_MODE=mode+matchany,SEARCH_TERMS=Blooms,TYPE=S} -
Error in report generation-Load report failed
I have installed crystal reports for VS2005 runtime in my live environment.When i try to load the report file from a .Net page i am getting the error'Error in Report generation-Load report failed'.
This works fine in development and testing but when moved to production we are having issues.
I believe i have a workaround i.e i need to open the rpt in a VS 2005 environment and re-write the connection string again.This fix had worked in development and testing when we had the same issue.
But not sure if this is a known issue with crystal reports and if so do we have any hot fixes for the same.
Please help.Hi Don,
The reason why i posted the item on 'data Connectivity issues' is because i suspect the problem is with the connection string.Though i had provided the correct connection string,re-writing the connection string with the same info might help to fix the issue with loading the report.
Does it mean that there is a problem in the connectivity?
I have a risk here that i cant re-write the connection string..i.e to open the RPT file in VS2005 and bind it.The production web server & database server sits in a third party environment and it is not in the company network.So i cant connect to this server to re-write from any other severs in the network.
Is there any fix which can applied to the server to get this issue resolved?
Cheers
Nithya. -
Report generation fails with below error
Hi Friends,
This is an extarct from "ccat /var/opt/SUNWsymon/PRM/log/prm.log"
Report generation fails for individual host but succeeds for all hosts.
prmlog September 13, 2010 12:52:14 PM Thread-287: Begin loading files
prmlog September 13, 2010 12:53:51 PM HandlerThread-0: Got trap: 2
prmlog September 13, 2010 12:53:51 PM HandlerThread-2: Got trap: 2
prmlog September 13, 2010 12:54:51 PM HandlerThread-1: Got trap: 2
prmlog September 13, 2010 12:54:51 PM HandlerThread-2: Got trap: 2
prmlog September 13, 2010 12:56:01 PM HandlerThread-0: Got trap: 2
prmlog September 13, 2010 12:58:51 PM HandlerThread-0: Got trap: 2
prmlog September 13, 2010 12:58:51 PM HandlerThread-2: Got trap: 2
prmlog September 13, 2010 12:59:51 PM HandlerThread-1: Got trap: 2
prmlog September 13, 2010 12:59:51 PM HandlerThread-2: Got trap: 2
prmlog September 13, 2010 1:00:00 PM Parallel:0: Call CrScheduledRequestBroker.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Call CrScheduledRequestBroker.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Call CrScheduledRequestBroker.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Call CrScheduledRequestBroker.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Call CrScheduledRequestBroker.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Database Error occurs!
prmlog September 13, 2010 1:00:00 PM Parallel:0: ERROR: relation "detail_temp_host" does not exist
prmlog September 13, 2010 1:00:00 PM Parallel:0: SchedOP: Exception: scp-2: Report request generation failed.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Call CrScheduledRequestBroker.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Database Error occurs!
prmlog September 13, 2010 1:00:00 PM Parallel:0: ERROR: relation "detail_temp_host" does not exist
prmlog September 13, 2010 1:00:00 PM Parallel:0: SchedOP: Exception: creature-t1000-08: Report request generation failed.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Database Error occurs!
prmlog September 13, 2010 1:00:00 PM Parallel:0: ERROR: relation "detail_temp_host" does not exist
prmlog September 13, 2010 1:00:00 PM Parallel:0: SchedOP: Exception: sdp-1-region2: Report request generation failed.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Database Error occurs!
prmlog September 13, 2010 1:00:00 PM Parallel:0: ERROR: relation "detail_temp_host" does not exist
prmlog September 13, 2010 1:00:00 PM Parallel:0: SchedOP: Exception: psp-1-region2: Report request generation failed.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Database Error occurs!
prmlog September 13, 2010 1:00:00 PM Parallel:0: ERROR: relation "detail_temp_host" does not exist
prmlog September 13, 2010 1:00:00 PM Parallel:0: SchedOP: Exception: shissun1: Report request generation failed.
prmlog September 13, 2010 1:00:05 PM Thread-294: Report successfully posted to web server.
prmlog September 13, 2010 1:01:01 PM HandlerThread-0: Got trap: 2
prmlog September 13, 2010 1:03:54 PM HandlerThread-0: Got trap: 2
In /tmp directory I could see database logs directory (/tmp/SunMCDBLogFiles)
Below is an extarct from "db-start-sql.log"
ERROR: table "summ_temp_events" does not exist
LOG: autovacuum: processing database "postgres"
LOG: autovacuum: processing database "sunmc"
LOG: autovacuum: processing database "postgres"
LOG: autovacuum: processing database "sunmc"
LOG: autovacuum: processing database "postgres"
LOG: autovacuum: processing database "sunmc"
LOG: autovacuum: processing database "postgres"
LOG: autovacuum: processing database "sunmc"
LOG: autovacuum: processing database "postgres"
LOG: autovacuum: processing database "sunmc"
LOG: autovacuum: processing database "postgres"
LOG: autovacuum: processing database "sunmc"
LOG: autovacuum: processing database "postgres"
LOG: autovacuum: processing database "sunmc"
WARNING: there is already a transaction in progress
ERROR: relation "detail_temp_host" does not exist
CONTEXT: SQL statement "INSERT INTO detail_temp_host (host_id) VALUES (21)"
PL/pgSQL function "get_alarm_data_ids" line 203 at execute statement
PL/pgSQL function "sp_get_nonperf_summary_data" line 92 at assignment
WARNING: there is already a transaction in progress
WARNING: there is already a transaction in progress
ERROR: table "summ_temp_events" does not exist
ERROR: relation "detail_temp_host" does not exist
CONTEXT: SQL statement "INSERT INTO detail_temp_host (host_id) VALUES (26)"
PL/pgSQL function "get_alarm_data_ids" line 203 at execute statement
PL/pgSQL function "sp_get_nonperf_summary_data" line 92 at assignment
ERROR: relation "detail_temp_host" does not exist
CONTEXT: SQL statement "INSERT INTO detail_temp_host (host_id) VALUES (25)"
PL/pgSQL function "get_alarm_data_ids" line 203 at execute statement
PL/pgSQL function "sp_get_nonperf_summary_data" line 92 at assignment
WARNING: there is already a transaction in progress
ERROR: table "summ_temp_events" does not exist
WARNING: there is already a transaction in progress
ERROR: table "summ_temp_events" does not exist
ERROR: relation "detail_temp_host" does not exist
CONTEXT: SQL statement "INSERT INTO detail_temp_host (host_id) VALUES (42)"
PL/pgSQL function "get_alarm_data_ids" line 203 at execute statement
PL/pgSQL function "sp_get_nonperf_summary_data" line 92 at assignment
ERROR: relation "detail_temp_host" does not exist
CONTEXT: SQL statement "INSERT INTO detail_temp_host (host_id) VALUES (1)"
PL/pgSQL function "get_alarm_data_ids" line 203 at execute statement
Kindly suggest me.. This SUNMC is doing more than killing.
Thanks
SriniI just received instructions from the TMG software company to uninstall and install the PDF driver they use. This fixed the problem. Apparently upgrading to v7.01 damages the driver but reinstalling it corrects the problem.
Thanks for the advice.
Mike
Maybe you are looking for
-
Error is coming at the time of Installation of SAP Netweaver 04's sp7
Hi All, An Error is coming at the time of Installation of SAP Netweaver 04's sp7 Error: Unable to create an account for <SystemName> for <SAP Service sid> can anyone suggest me regarding this. Regards Phanikumar
-
Can I use a Motorola Motorazr Maxx VE on my prepaid plan?
Can I use one of these so I can have Bluetooth while I am driving for a change?
-
Monitor going to sleep mode if I dring to install windows 7 home premium
Hello I have probleem to installing Windows 7 in my first pc build . At the beginning I turn on my pc and everything was ok ,I get boot menu and then I tried to install Windows 7. Fiew steps furduer when Windows was installing then monitor goes black
-
since i updated the software on my iphone 4 i have intermittant loss of sound i have researched and this is a common problem trouble is no one has an easy fix answer the best suggestion is to revert the phone back to the old software but i have no id
-
Hi, If anyone could help, that would be great. JTables are starting to drive me crazy. I have an editable JTable that I have created a CellEditor for. I found that if I am editing a cell and want to tab to the next cell, I have to hit the tab twice.