Report generation tool kit for vista

Where can we get report generation tool kit software(for vista Operating system) link .one of my friend has given me that software.He said he had got it from internet.can anyone give me the link so that I can download report generation toolkit software (for vista)
Thanks
kiranmayi

Hi Kiranmayi,
You can download Report generation toolkit from the following weblink:
https://lumen.ni.com/nicif/us/evaltlktrepgen/content.xhtml
or you can send a mail to [email protected] stating your full address and your requirement and we can send you  evaluation DVD for free.
Thanx
Gaurav

Similar Messages

  • Report Generation tool kit for MS office (Opening an existing excel file and appending to the bottom)

    I don't have any problems creating and filling an excel sheet with data. I use the New Report.vi, Easy Title.vi, and Easy Text.vi to create the file. I then save and dispose properly.
    What I don't seem to be able to do is open the exsting file and append data to the end of the sheet.
    Thanks in advance for your help.
    todd

    Hi Todd,
    You can do this by creating a new Excel report with the existing excel file path wired to the "template" input. Then use "Excel Get Last Row.vi" (located under Report Generation\Excel Specific\Excel General) to obtain the location of the last row. Then use that location to input new data into the file.
    Hope this helps,
    Dan

  • Report generation tool kit not printing

    I had the report generation tool kit version 1.01 for some time but never used it. I was comfortable with printing front panel vi 's.
    But now I installed it on my computer with a windows 2000 and LabView 6.02 .
    I created an application (executable) that will print (using the report
    genartion tool kit). The application works fine in my development computer
    (win 2000).
    When I installed it on another computer with a win 2000, it prints as
    expected
    but when I try to exit I get a message from windows that the application is not responding (I have to go to task manager and terminate the application).
    Both computers have word and Excell installed
    I installed the application on a third computer (win 2000), but this com
    puter does not have word or excell installed. The application does not print the
    portion of the software that uses the report generation tool kit, but it can print the front panel of vi's (set to print an end of excution).
    In all 3 computers, I have runtime engine 6.02 installed. My vi is simply
    the example vi ""Sample test report.vi"", but customized to my application, printing standard report.
    What is happening ?

    Based on what you sent, the version of Excel and Windows that are being used is a non issue since none of the code makes any calls to either one. They all refer to the older version of the report generation VIs that use NI's proprietary report generator.
    I can think of two explainations. First, you aren't using what you think you are. Second, NI retained the same VI names when they went to the Word/Excel version of the generator, and I am linked into the old version.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • Pareto Chart using Report Generation Tool kit

    Hi,
    Please help me to get clarification for the following:
    I need to log data into MS Excel Report and generate Pareto Chart using LabVIEW for the Logged data.
    I have Report Generation Tool kit. but i couldnt find the an option to generate Pareto chart with it.
    Thanks,
    Thirumala.

    One way is to Create a Excel template in the predefined format with the rows/colums linked for the Chart.
    Use this template with report generation toolkit to populate data in the predefined cells.Based on that the chart will be automatically updated.

  • Report Generation Tool Kit

    Hi,
    I have LabView7.1 and Labview8.0 installed in my pc.Recently i installed Report generation tool kit(version 1.0.1.0)
    In the functions palette i couldnt able to see the Excel Specific VI sub palette and Word Specific VI sub palette.
    Can u tell me what is the problem
    Regards
    Meenatchi

    You can not see it in either version?  Or has it been installed to the wrong version?  There has been postings on this board regarding how to get it to install to multiple versions.  I have not found tha to work.  I go in a 'manually' copy the VIs from add-ons, examples, and help to the latest version of LabVIEW that I have.  But if you look here you should find the help you need.
    Paul <--Always Learning!!!
    sense and simplicity.
    Browse my sample VIs?

  • Hi i have installed report generation tool kit but i am unable to find a function

    hi,
    I have installed report generation toolkit full version and i have few example programms in which a function named generate report get data to modify.vi been used but i am unable to find a function pallet called  Generate Report get data to modify.vi in my function list and when ever i try to RUN this example programm i get an error saying this function is not executable if i go inside that function again its showing the same error inside that function saying its not executable if any one knows about this VI pls help me
    regards
    narayan 

    hi,
    i have tried your method by going into
    resorces i have opened the VI s there its not showing any error but how
    to open same vi or call that VI  while i am programming how i can
    search those functions in my function  pallet and i have a previously
    written prog in LABVIEW 8 VERSION where he has used this functions and
    he has made some SUB VIS using those functions and some of the contents
    VI S of resorce he has put it in a folder so every time when i try to
    open this VI  it says dependncie issue it is trying to access the VI
    FROM RESORCE AS WELL HAS FROM THE FOLDER WHERE PREVIOUSLY STORED HOW TO
    SOLVE THIS PROBLE PLEASE HELP IF ANY ONE HAS SOLLUTION FOR THIS
    REGARDS
    NARAYAN

  • How to justify the values in table using report generation tool kit

    Hi
    How can we align the values in excel table using report generation toolkit.
    like left,right,center.
    Regards,
    hari
    Attachments:
    Report_excel.vi ‏34 KB
    New Bitmap Image.JPG ‏134 KB

    Hi,
    A trigger is designed to be a part of a transaction, not it's end.
    It is like following these steps (not really accurate, but should give an idea):
    1. programA issues INSERT statement on tableA
    2. 'control' goes over to the database
    3. constraint checks happen
    4. the associated triggers on tableA do their work (e.g. fetching a sequence value for a primary key)
    5. 'control' goes back to programA
    6. programA decides if a commit (no error occurred) or a rollback (error case) has to be issued.
    Did this help? Probably not, I'm not happy with what I wrote, but anyway... :)

  • I have problem with running excel macro in report generation tool kit

    I am trying to use Excel Run Macro.vi but run into a problem: Exception occured in Microsoft Excel, The macro 'personal.xls!Macro1' cannot be found.. Help Path is C:\Program Files\Microsoft Office\Office\1033\xlmain9.chm and context 0 in Excel Run Macro.vi->example.vi
    Also I tried to save the macro under the file that is active and I get the same results.
    I saved the macro as *.bas file and ran it using Excel Import Module and did not see any erreos and it did not do anything.
    Where a re some god examples that use the excel marco feature using the new report generation vis?

    masoud,
    Try this example out and let me know if you have any more questions. Also, this is in LabVIEW 6.1 format. If you need it in a different format, please let me know.
    Randy Hoskin
    Applications Engineer
    National Instruments
    http://www.ni.com/ask
    Attachments:
    Module1.bas ‏1 KB
    TestAddMacro.vi ‏34 KB

  • Excel MSGraph Axis Value w/ Report Gentration Tool kit help needed

    Hello,
    I am working on making all my Printed Data sheets dynamic so I don't need to have an Excel Template for each test I create. I have been able to make my own modifications to some of the Report Generation tool kit VIs to add little things I need or want changed, but I am stuck.
    I currently have LabVIEW writing Charts in Excel, using the Insert Graph VIs from the tool kit but I want to be able to make the X Axis Values invisible but leave the Y values for this particular data sheet.  I have looked through all my documentation but cannot find anything referring to setting that.
    What is the correct ActiveX Method and/or Property that I need to incorporate to do this? I found that in Excel if I click on the Chart it is in the Chart Options Menu but I cannot find a way to control it through LabVIEW.
    I am currently using 7.1.1 with Office 98 and the Report Generation Toolkit 1.1.0
    Any ideas?
    Thanks
    Jeff
    Jeff D.
    OS: Win 7 Ultimate
    LabVIEW Version: 2011,2010,2009 installed
    Certified LabVIEW Architect

    Hello,
    LabVIEW should have access to everything that the excel ActiveX object publishes.  One way to discover how to do it would be to record a macro in excel, where your recorded actions are on the x-axis as you desire.  This way you will have a macro which you can run that will do this for you.  Perhpas more importantly, you will then be able to look at the code for that macro you recorded, and make the equivalent calls in LabVIEW, which should basically expose which ActiveX calls on that object achieve the axis modification.  In any event, to help you with this process, below are some useful links.  Also, you will find other threads on this matter if you search the discussion forums.
    Excel and LabVIEW Integration Tutorial:
    http://zone.ni.com/devzone/conceptd.nsf/webmain/4d86c9752c658da78625689300730c10
    Here are links to examples of using macros in Excel from LabVIEW:
    http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3DD2F56A4E034080020E74861&p_...
    http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3D9D856A4E034080020E74861&p_...
    I hope this helps!
    Best Regards,
    JLS
    Best,
    JLS
    Sixclear

  • Excel Graph Legend Formatting - Report Generation Tool

    Hi all,
    I'm currently using the Report Generation Tool for Labview '11 and cannot seem to figure out how to edit the font properties for a graph's legend. Attached is a screenshot of an example output.
    The Excel Graph Font.vi's Help file says that it should be able to modify the legend, yet I can't seem to figure out how to configure it to do so. If anyone can walk me through the steps or tell me what I am missing, I'd greatly appreciate it.
    Solved!
    Go to Solution.
    Attachments:
    excelLegend.png ‏33 KB

    ChaoyD wrote:
    Hello again,
    It seems my team has decided to change direction and use Word instead of Excel. As such, I've been attempting to convert the VI ben64 provided, but I'm stuck on the ActiveX references... I've attached what I've done so far, but could someone help me (or instruct me) on making this VI work with Word?
    Thanks.
    The Word object model is probably the most complicated of the Office suite and you are loosing the calculation ability of Excel.
     Attached is a vi to format the chart legend in a Word document.
    Ben64
    Attachments:
    Word Format Graph Legend.vi ‏26 KB

  • How to add License Key For Integration Tool kit For SAP in Linux Server

    Dear Experts,
    We are Using BO XI R3.1 SP3 Enterprise Version ,Integration Tool Kit For SAP,Live Office.
    The Server is Linux Server.
    But while generating reports in Infoview it is giving error like ""_check that you are licensed to access SAP Data Source_".
    So we came to know that license Key might Expire for Integraton Tool Kit For SAP in Bo Server.
    So can you tell me how to add the license key For BO XI R3.1 SP3 Integration Tool Kit For SAP in Linux Server.
    Thanks & Regards,
    Venkat

    On Unix / Linux you should be able to leverage the response from Raphael and change:
    Location＝%BOBJDIR%/bobje/data/.bobj/registry/software/business objects/suite 11.5/sap/keycode/.registry
    For more information verify the below link
    [How do you update the SAP Integration Kit license?;
    Regrads
    Pardhu

  • How to Use 2 Separate Y-Axis in Report generating Tool Kit

    Hello
    How do I make 2-Y-Axis chart on Word document from Report Generating Tool Kit?
    Now can make Chart to appear in Word document with Multiple plots, but all plots go to same Y-Axis.
    I want to put in chart two Plots with Same X-Axis, but different Y-Axis.
    I know it is possible manually in word, but how  can I do it with Labview RGTK?

    hmm, yes. I guess that is the only alternative. But is there anyone who has made something similar in the past?
    I am not sure how to interpolate this data to an array of 30 000 data points without loosing data in the beginning.
    Since it is exponential, the first few dozen datapoints are at really low freq. All about 10.xx Hz and increasing.
    Then in the end of the array, i have like one datapoint at 15kHz, one at 15,5kHz etc. Will be alot of gaps in my array and alot of lost data in the beginning I think.
    It's strange though that labview doesn't allow for waveform, or atleast let me put an XY-array into these methods since i believe always you want an logarithmic freq-axis when having a frequency-response to handle.
    Anyway, anyone who has a nice little VI that interpolates data like this?

  • Are report generation tools exclusively text-based?

    Hi,
    I'm using LabView 5.1.1, and have just explored the new (to me) report
    generation tools. Handy though they are (I added the facility to print
    results from my project in a nicely formatted report in just a couple of
    hours) it strikes me that it would be even better if I could add bitmaps
    to the report. This would let me add pretty logos, but obviously we
    could do far more using LabView pictures/graphs etc.
    There is no reference in the documentation or on the NI web site as far
    as I can tell, but I can't be the first programmer wanting to do this.
    Any hacks out there?
    Best wishes to you all,
    Allan Green
    Medical Physics and Clinical Engineering,
    Queen Elizabeth Hospital Edgbaston Birmingha
    m UK
    ==================================================================
    My views and opinions are seldom that of the institution for which
    I work. I take that to be a healthy sign.
    ==================================================================

    I too have tried to use the report functions. They work fine for text only.
    In the end I ended up scraping the idea and simply configured a vi (which i
    called report.vi) to print at completion. I set the vi up with tables and
    bitmaps the way i wanted it and called it as a sub vi (passing the data i
    wanted printed to it) whenever i wanted a report printed.
    It works really well. The only problem is that it must always be strictly
    to a given format as defined in your vi.
    I suppose you could hide some controls using attribute nodes (and maybe
    enable others) if you didn't want them printed.
    Cheers
    John
    Reinis Kanders wrote in message
    news:[email protected]...
    > On windows I have had success with using HiQ for report generation. I
    > would manually create a template for a
    > particular project, then send data using LV VI's to that template then
    save
    > it with different name or just print it.
    > Using HiQ (free with LV 5.1) I was able to have pictures, graphs, you name
    > it. Also since HiQ gets the actual data, then by saving HiQ file you do
    > data logging as well, those HiQ reports can also be stored in database.
    > I found HiQ approach to be more flexible than NI report generator,
    only
    > drawback is that it is not cross-platform portable. For cross-platform
    > report generation I have been looking into some sort of XML based
    approach.
    >
    > Hope it helps,
    >
    > Reinis Kanders
    >
    > "Allan Green" wrote in message
    > [email protected]...
    > > Hi,
    > >
    > > I'm using LabView 5.1.1, and have just explored the new (to me) report
    > > generation tools. Handy though they are (I added the facility to print
    > > results from my project in a nicely formatted report in just a couple of
    > > hours) it strikes me that it would be even better if I could add bitmaps
    > > to the report. This would let me add pretty logos, but obviously we
    > > could do far more using LabView pictures/graphs etc.
    > >
    > > There is no reference in the documentation or on the NI web site as far
    > > as I can tell, but I can't be the first programmer wanting to do this.
    > > Any hacks out there?
    > >
    > > Best wishes to you all,
    > >
    > > Allan Green
    > > Medical Physics and Clinical Engineering,
    > > Queen Elizabeth Hospital Edgbaston Birmingham UK
    > >
    > > ==================================================================
    > > My views and opinions are seldom that of the institution for which
    > > I work. I take that to be a healthy sign.
    > > ==================================================================
    > >
    > >
    >
    >
    >
    >
    > -----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
    > http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
    > -----== Over 80,000 Newsgroups - 16 Different Servers! =-----

  • How to install Open-SSL tool kit for Key conversion

    Hi Expert,
    Can you please suggest how do i install Open-SSL tool kit for Key conversion .
    I need this for creating public and private keys for a key based SFTP connection.

    SAP PI donnot support SFTP protocol. If you have a third party SFTP adapter and wanted to generate a keypair, you can use tools like PuttyGen.
    But you need to download the tool on to the PI server to generate a key pair.
    Instead, you can use the unix command to generate key pair (Recommended) -
    ssh-keygen -t rsa
    http://linuxmafia.com/pub/os2/stahl-ssh/snafu-mirror/ssh-keygen.html

  • About Labview tool kit for Ti's DSP (RTDX buffer size)

     Now I am using Labview tool kit for Ti's DSP to
    do the RTDX communication between Labview and Ti's 6713DSK. Now I am
    encounting a problem that the my Human interface (Labview) works fine in
    the first 10 minutes. However after that data looks freeze. The RTDX
    become very slow. It's hard to input data or receive data to DSP through
    Labview. I am sending 1 Integer 16 bit data and 1 floating data to DSP
    using RTDCXwrite vi and the frequency is 33.3Hz. And at the same time I am
    transfer 5 integer 16 bit data from DSP to Labview. The frequency is 25Hz.
    What's wrong with this? Is that because the buffer for RTDX has been used
    up? And how to set up the RTDX buffer in Labview? because I check the vi
    about RTDX and can't find a definition about the buffer. This is very
    important in my project. Please tell me how to set up the buffer size and
    the RTDX work state (continuous mode or discontinuous). Thank you very
    much and I am looking forward to hearing from you.

    Now I am using winxp, 512Mb RAM, LV version is 7.1. My labview coding and DSP code main function is attached below. Please help me out. I want  to transfer 8 16bit integer data. Is it better that I used an array to group these data then transfer this array using only one channel. Compared with using 8 independent channels to transfer them.
    Attachments:
    HMI_pannel.zip ‏85 KB

Maybe you are looking for