Report Generation Toolkit - Excel Templates

Hi,  I've created an Excel Template with a single formatted
worksheet.  I need to generate a report with a varying number of
worksheets but all based on the same template.  I tried it using
the ADD WORKSHEET vi but this just adds an unformatted worksheet. 
How can I use the template's worksheet format for each worksheet that
gets added?
Thanks,
Charlie

Hey Guys,
  I know this post if kind of old but I hope maybe one of you can help me out.  I'm using an invoke node similar to what is above to print out an Excel spreadsheet to the default printer.  My issue is that when I try to print from the spreadsheet from the executable, the executable crashes.  I know it is that invoke node. The reason why I say that is because until recently I had two development computers, one running on Windows 7 LabVIEW 2010, and one running on Windows XP LabVIEW2010.  The original .exe was built with the XP machine, when I tried to make some changes with the Windows 7 machine and open the project it would say that there was a missing connection to the invoke node even though I did not touch that part of the application. I would then remove the invoke node, add it again and it would clear the error for whatever reason. I would then build the .exe with the Windows 7 machine and when it would run, the application would crash at the point where it goes to print the spreadsheet.  I got around this by building the .exe with the Windows XP machine, and it worked fine without any issues. However, my Windows XP machine cra**ed out so i'm no longer able to build the .exe on the XP machine .  I needed to make some changes to the .exe not anything involving this section of the code and for whatever reason when the application goes to print it crashes.  I get some criptic crash report from Windows that is pretty much useless.  I think its a Windows thing. This was workign correctly though until I did a build on the Windows 7 machine.
Attachments:
Printout Invoke Node Excel.png ‏70 KB
crash1.png ‏22 KB
crash2.png ‏23 KB

Similar Messages

  • Report generation toolkit excel, decimal?

    Hello!
    I have problem with the report generation toolkit excel!
    I only gets 3 decimals in excel?
    Ex. In labview = 0.0458943 when i send it to excel = 0.046.
    I use Excel easy table.vi to transfer my array, should I use someting else?
    Ive already tryid to increase the decimal in excel but i doesent work.
    Labview 8.6
    Report generation toolkit ev 113 

    Johan1300,
    It sounds like you are writing a 2-D Array of doubles to excel.  The Excel Easy Table.vi converts numerics to strings before writing data to excel.  It is written to always use 3 decimal places.  You need to convert your 2-D array of doubles to strings before writing the info to excel.  Here are a couple of ways to make the conversion.  The top method is based on how the Excel Easy Table.vi makes the conversion.  Note that in both examples the format string constant sets the number of decimal places to 8.
    Message Edited by Wayne.C on 04-08-2009 09:12 AM
    Attachments:
    2D Doubles to 2D String.png ‏6 KB

  • Report Generation Toolkit Excel errors and Libraries, Classes

    Hello All,
    I'm using the Report Generation toolkit Excel functions to handle some data and create graphs.  I'm running into problems with the Add Worksheet.vi.  At the very start of the vi, it closes the reference to Shapes.  Occasionally, the Close Ref will throw an error.  I haven't pinned down the exact cause yet (probably an invalid reference).  The error itself wouldn't be a problem.  Under other circumstances I would choose to ignore it and continue on.  The problem is, this is stored in a Class Library controlled by NI.
    Solutions I've tried without success:
    1.) Make changes, and save the new vi with another name - can't do it because it's encapsulated and the Library is password protected.
    2.) Install toolkit in something other than the default folder, so I can make changes and put it under Source Control - installer doesn't allow a new path to be entered.
    3.) Change the vi where it is.  This works until I move the source to another computer or I update Labview.  At that point I lose all my changes.
    Maybe it's just my inexperience with Classes, but I just don't see an elegant solution to this.  Ultimately I'd like to copy the library off to somewhere else and put it under Source Control so I can make changes and additions to it (NI folks - providing a password to unlock the lib would be helpful...).  Does anyone have suggestions on how I can accomplish this?
    Thanks in Advance,
    Doug

    Hi Ben,
    Sorry about the first post.  After re-reading it, it sounds more like a frustrated rant than a request for help.
    I've attached a simplified vi to try to illustrate the problem I'm having.  I'm running Excel 2007.  Please open the vi, then open Excel Add Worksheet.vi.  At the start of the vi, Close Ref for Excel.Shapes occasionally throws an error.  So far, I have not been able to consistently reproduce the error, so I can't really troubleshoot it.  As I recall, the error code is 1045.  The error is carried through the rest of the vi, causing invalid references to be written to Excel._Worksheet and Excel.Shapes, going out to NI_report.ctl.
    So, here are the issues I'm running into (other than the error itself):
    1.)Short of closing and reopening the file, there is no way to recover from the error.  After the error, there is an invalid reference in Excel._Worksheet.  There is no vi available to regenerate references in NI_report.ctl.  I could easily write a vi to start from Excel._Application and re-read them, but because NI_report.ctl is in a Class library (controlled and passworded by NI), I can't add the vi to the library.
    2.) I found that I could ignore the error by wiring around it.  If I disconnect Error Out from Excel.Shapes Close Ref and wire Error In from Excel.Sheets.Count to the Error In of the Close Ref, everything works fine.  Under other circumstances, I'd save this with a new vi name (because functionality changed) and continue on.  But, because the vi is part of a Class library (controlled and passworded by NI), I can't do this.  I can save the vi with the modifications (because Excel Add Worksheet.vi is not passworded), but if I pass the source off to someone else, they will have to make the same changes on their installation of the NI Report Generation Toolkit.
    Again, I can't reproduce the error with any regularity.  I've run the example vi I provided a few times and everything seems to work fine.  If I come up with something, I'll repost.  If you (or anyone) has an idea of what could be failing or if they've seen the problem, I'd appreciate a comment.
    Thanks again,
    Doug
    Attachments:
    Excel Fail.vi ‏15 KB

  • Report Generation Toolkit Excel Vi's do not run after creating an executable​. What am I missing?

    I have labview 8.5 and Report Generation Toolkit version 1.1.2.   My vi works fine during development. When I make an executable or an installer the excel vi's do not work. I have seen this question posted before but it has always been for earlier revisions and the answers do not seem to apply with 8.5 and 1.1.2. 

    Hello ajh,
    You will have to include Dynamic VIs in the executable you build. The following link has more information:
    http://digital.ni.com/public.nsf/allkb/C38CE3F3054​2D65B86256F0E00740DD8
    Prashant.

  • Report Generation Toolkit 打开现有的Excel 文件

    用activeX打开excel我会，但是属性太复杂。不想用ActiveX的方式。
    我有LabVIEW Report Generation Toolkit for Microsoft Office;
    里面的例子都是生成新的excel 文件
    如果要打开现有的excel文件，然后对里面的资料进行操作，可以透过这个toolkit实现吗?

    这个论坛没有人气吗？

  • Report generation Toolkit: Excel report functions error -2146827284

    Hi,
    I'm trying to create an automated report using excel functions from the report generation toolkit in labVIEW. When I run the program that generates the report first time round (the report consists of several worksheets, each worksheet is added onto the report at a diffferent state in a state machine) it always works fine and no error is generated. However, when I run the program again it will infrequently (sometimes it does, other times it will not) generate the undefined error -2146827284, this is coming from one of the excel report functions and it cannot find it on highlight execution mode.
    Does anyone know anything about this error, why it occurs, how to prevent it?
    I would appreciate any help.
    Thanks,
    Rowan

    mebels_cti wrote:
    Found something that helped; https://forums.ni.com/t5/LabVIEW/Error-code-quot-2146827284-quot-when-trying-to-open-an-Excel/m-p/20...
    Excel still open
    So I added this;
    You should use the Application Quit method instead of killing the task. I doubt this is the cause of your issue.
    Ben64

  • Need help with Report Generation Toolkit: Excel Set Cell Format.vi

    Hi people,
    I've been searching and found this old thread of someone asking what is the input parameter "Number format". And I dont know what should I put in there. I've tried so many possibilities, but nothing works so far, such as:
    0,0
    0,?
    0,#
    #,0
    ?,0
    and also with @, doesnt works. Where would I find help about this parameter?
    I'm using Excel2003, german version, thus local decimal separator is a comma.
    I also found this help from NI, but seems doesnt help me either. Do I miss something important?
    thanks,
    Yan. 

    Hi,
    I've used your suggestion and some numbers in excel doesnt need to get "right click, change to numbers" anymore (green indicators on the left-top side in some cells are gone). But, I think its still not a number, because I cant use a simple formula, such as in cell A10 I type "= A1/2" (cell A10 equals cell A1 divided with 2) . I got error which says its not a number.
    Well, but other thing is found, any format-string I put in the input of Excel Set Cell Format.vi, such as #,########, will be shown the same as "customize #,########" if I right click in a cell in excel and click "Zellen formatieren" (formatting cell). But however, the numbers are still depends on the input of the format I put in the Append Table to Report.vi.
    regards,
    Yan.

  • Report Generation Toolkit with Excel 2003 and Excel 2000

    Hello,
    I'm using the Report Generation Toolkit to generate an Excel report from an Excel template.
    The "NI_Excel.lvclass" is included in the "source" section of the application builder options.
    I create an exe file on  a PC where Excel 2003 is installed. On a Notebook, where only Excel 2000 is installed, the application crashes at the generation of the report:
    I guess the problem is the different version of Excel but I don't know. On the developer PC with Excel 2003 it works fine.
    In this document it's only talked about different Word versions.
    How can I use the Report Generation Toolkit here?
    I'm using it that way:
    Regards

    Oh, it seems that the Report Generation Toolkit "only" supports Excel XP/2003/2007.
    I think, that's the problem.

  • How to get data from an existing Excel file using report generation toolkit

    I'm trying to use the Excel Get Data vi from the report generation toolkit, but i can't figure out how to turn a browsable path into the right type for the VI.  I've tried using the New Report.vi, but that doesn't work unless you use a template.  It won't open an existing excel file and make it an open report to pull data from.
    Essentially, i have a bunch of excel files that have data in them and i want to use a VI to analyze the data.  So, i'm trying to pull in all the data directly from the excel file so i don't have to reproscess them all into text so i can use the more standard spreadsheet VIs.  But to even convert the excel file programtically in labview won't i still need to be able to open the excel file and get the data?
    Solved!
    Go to Solution.

    I C.
    Got it,
    the reason why I can view it using my Excel file because its in .CSV.
    I open Microsoft Excel to open .CSV file.
    But you can also open .csv file with notepad.
    So, you cannot open .xls with Read Spreadsheet File
    I learn something everyday
    Best regards,
    Krispiekream

  • How do I put data into a template using the Labview report generation toolkit for Microsoft Office?

    I am running Lookout 5.0 and have recently purchased the Labview Report Generation Toolkit for Microsoft Office to create reports from my Lookout logged data. Since I have never used Labview I am having my problems. I tried following the tutorials but they do not seem to be examples of what I want to do.
    I log rainfall totals (1 spreadsheet)in Lookout from 40 different sites in 5 minute increments. I copy these totals and paste them into another spreadsheet which sums them up to give me hourly totals and then paste those totals into a spreadsheet for distribution.
    In Labview I create a new report and use the distribution sheet as my template, but how do I complete
    the steps of loading the raw 5 minute data into labview and then paste it into the hourly total spreadsheet and then transfer those totals into the distribution template?
    I have been trying to figure this out for over a week, and I am getting nowhere.
    Any response would be appreciated.
    Thanks
    Jason P
    Jason Phillips

    Lookout saves the files in .csv form which can be opened in Excel. I did make some progress by using the "append table to report" vi which allowed me to put values into an array and then those values were entered into my template on my report vi.
    Where I am stuck now is I want to be able to put values into my template from a .csv file, not from an array I have to manually put numbers in.
    Once those values are in my template I want to pull summed values from the template and place them into a final excel file for printing.
    I have attached examples of the files I am working with to help you better understand what I am trying to do.
    I hope that makes sense.
    Jason Phillips
    Attachments:
    HourlyTotalsTemplate.xls ‏120 KB
    eb_rain_gauge_ss.csv ‏23 KB
    EastBankHourlyRainReport.xls ‏28 KB

  • .tmp file is created by NI Report generation toolkit for logging data to MS Excel

    Hi,
    I am getting ".tmp" file while logging data to MS Excel by NI Report generation toolkit. Instead of assigned file name, toolkit is generating a junk value with .tmp extension, but I can able to open this .tmp file with MS Excel.
    Can anyone help to solve this issue?
    Thanks,
    Thirumala

    Hi Thirumala,
    You may experience issues when you try to save a Microsoft Excel file if one or more of the following conditions are true:
    1. You save an Excel file to a network drive where you have restricted permissions.
    2. You save an Excel file to a location that does not have sufficient drive space.
    3. The connection to the Excel file has been lost.
    4. There is a conflict with an antivirus software program.
    5. You save an Excel file that is shared.
    6. The 218-character path limitation has been exceeded when you save an Excel file.
    7. The Transition Formula Evaluation feature is turned on in Excel.
    8. The file was created from a template that contains embedded objects.
    Hope this will help to solve your problem.
    Thanks,
    Sanad MM

  • Problem for Report Generation Toolkit for excel 2000

    Hi all,
    Now I am Developing my program with Report Generation Toolkit 1.1.0 and Labview 7.1.
    In my computer I am using Excel XP, and there is not any problem. But when I build to
    a exe file, and use in a computer with Excel 2000, it didn't work.
    And I try to check the source file in this computer, I found that there any some connection
    error. And this is caused by the active X class. As I know Excel 2000 is using Microsoft Excel
    Object Library 9.0, but i cannot find it in the list of active x. So it is using Microsoft Excel Object
    Library with a very old verison. So in the property node there are missing functions, such as the
    UsedRange in _Worksheet in the Excel_Get_Range.vi. However, In VBA, I can find the 9.0 Library.
    Is it the problem of 9.0 library? How can I solve the problem? How can I upgrade the library to 10.0?
    Thanks.
    Regard,
    Ryan

    Hi Mike,
    Since my program is for all the staff in office, everyone may use it.
    I cannot call the whole office to upgrade the excel to XP.
    And I think Report Generation Toolkit is alway support Excel 2000,
    since the old version of it is not support for Excel XP.
    Regard,
    Ryan

  • REPORT GENERATION TOOLKIT AND EXCEL

    i have a problem with report generation toolkit and excel
    the problem is:
    i must read & write from a excel worksheet when this is open but when i using the report generation the worksheet is open another time
    have some solution for this problem?
    sorry for my english

    You need to close Exel when before your VI is running. Excel can not have two instances running at the same time.
    Joe

  • I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 profession​al. The create new report VI opens Excel but throws error (-21471672​62- from automation open VI) when I try to open MS word. please help...

    I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...

    Hi Leo22,
    Does this error occur if you use any of the example programs that come shipped with LabVIEW? I would try opening one of the examples that write data to Word and see if those give you an error. Also, have you tried just putting down a New Report.VI and change the report type to Word? If this simple vi (that's all you need to open Word) breaks, I would check to see if there are any instances of Word still open. Check the task manager to see if any word processes are still open. There should not be a problem accessing Word 2003 from LabVIEW 7.0. If neither of these solutions work, please give some more detail about your application and we can research further. Thanks!
    Jeremy L.
    National Instruments
    Jeremy L.
    National Instruments

  • Excel value range with Report Generation Toolkit

    I have an excel sheet.  I want to find out the range for cells with values.  At least, I want the find out what's the last row that has values in it.  I tried "Excel Get Last Row.vi" in the report generation toolkit, but it would treat a blank cell as a valued cell if it is filled with another color.  Therefore, that won't work. 
    I don't want to use active x, and I don't want to write a separate vi to search for the last row.  I want to see is there a way to use the report generation toolkit.  Can I somehow get a hidden method from the class?  I would think that, since they are charging for the report generation toolkit, a simple function like that should be included.  Thanks!
    Kudos and Accepted as Solution are welcome!

    I am pretty sure that the Report Generation Toolkit does use ActiveX, so you are using it even if you dont want to.
    Seems to be how the UsedRange function is being used in the toolkit.
    See here for some examples: http://blog.contextures.com/archives/2012/03/01/select-actual-used-range-in-excel-sheet/
    I tried, and it does not find the blank cells with colored backgrounds.
    This will require some activeX modifications though.
    Kenny

Maybe you are looking for