Report Generation toolkit for labview 2010

H All.
I'm looking to download the report generation toolkit for labview 2010. When I proceed to download the toolkit from the national instrumnets website, it says that i need to labview 2011 or later in order to install it.
Is there a version of this report generation toollkit for labview 2010 and can someone provide a link maybe??.
Thanks for reading.
Solved!
Go to Solution.

Try this: [Link removed, NI software downloads can be found on ni.com/downloads, the LabVIEW 2010 Report Generation Toolkit is available to customers with Standard Service Program here: http://joule.ni.com/nidu/cds/view/p/id/3247/lang/en, other customers may contact NI directly]
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.

Similar Messages

LabView database connectivity toolkit 1.0.1 compatibility with MS-ACCESS 2010 / Labview report generation toolkit for Office 1.1.3 compatibility with Office 2010

In the very near future we will be forced to upgrade to Office 2010 Company wide and I am a little concerned with some of our older test platforms that have applications built in LabView 8.2.1. These applications save data to MS-ACCESS 2000 databases using the LabView database connectivity toolkit 1.0.1. Office 2003 is also loaded on these test platforms with all test reports generated using the LabView report generation toolkit for Office 1.1.3.
I have not gotten my hands on a copy of Office 2010 yet to see if there will be any compatibility issues. Does anyone have any experience in this area?

The MS-Access part is fairly well isolated through the ADO interface LabVIEW uses. The only possible problems there IMHO are difficulties with possible Acess compatibilities itself such as an example, SQL statement you may have invoked directly through the ADO interface. Maybe you did use a depreciated command back then that has since been removed. As long as the only thing you do are simple INSERT and SELECT statements only, I would expect it to just keep working.
The Report Generation interface is a different beast. Microsoft manages to change the Automation interface with every version of office in a way that strongly binding applications like LabVIEW break on. There is no good way around that except not changing those methods, but that is a cause that has been lost already. You will certainly have to verify the version dependant Report Generation API VIs to still work with Office 2010 and most likely you will have to make some changes to those VIs to make them work again with the modified ActiveX interface of Office 2010. Note, that I have no experience with porting report generation to Office 2010 but I have had some headaches from porting that between Office 97, 2000, 2003, and 2007.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

How to obtain the table index in word use LabVIEW Report Generation Toolkit for Microsoft Office

I created a word templete and it had several tables. When I use the "Word Edit Cell" function in LabVIEW Report Generation Toolkit for Microsoft Office, the function need "table index", and I didn't find any function to get or set the table index in word document. How can I achieve my attention to write value to specified table cell using the "Word Edit Cell" function?
Thanks for reply!
YangAfreet

Hi yangafreet
You do not need to get the table index for the word edit cell.vi from anywhere. LabVIEW will automatically index all the tables in the document. See the attatched vi for an example.
Rich
Attachments:
Table Edit.vi ‏23 KB

LabVIEW Report Generation Toolkit for Microsoft Office

Hi!
One question. I have bought the LabVIEW Report Generation Toolkit for Microsoft Office
Version 1.0a and am trying to install it under Labview 7.1 but the installation stops with the error: "you need a Labview Version 6.0 runtime engine." Is there any possibility to install the toolkit anyway?
Regards
Stefan

Hi
You can try to update your Version 1.0 to Version 1.0.1. Then it should be working.
Here ist the link for the free update:
http://digital.ni.com/softlib.nsf/websearch/19003CF70BB8A57186256E5A00672E2A?opendocument
if it not works you can try to install the runtime engine 6.0 on your system. her is the link:
http://digital.ni.com/softlib.nsf/websearch/D5F11A64A905DB27862569EC005E31E2?opendocument&node=132070_US
Regards
Manuel

How do I put data into a template using the Labview report generation toolkit for Microsoft Office?

I am running Lookout 5.0 and have recently purchased the Labview Report Generation Toolkit for Microsoft Office to create reports from my Lookout logged data. Since I have never used Labview I am having my problems. I tried following the tutorials but they do not seem to be examples of what I want to do.
I log rainfall totals (1 spreadsheet)in Lookout from 40 different sites in 5 minute increments. I copy these totals and paste them into another spreadsheet which sums them up to give me hourly totals and then paste those totals into a spreadsheet for distribution.
In Labview I create a new report and use the distribution sheet as my template, but how do I complete
the steps of loading the raw 5 minute data into labview and then paste it into the hourly total spreadsheet and then transfer those totals into the distribution template?
I have been trying to figure this out for over a week, and I am getting nowhere.
Any response would be appreciated.
Thanks
Jason P
Jason Phillips

Lookout saves the files in .csv form which can be opened in Excel. I did make some progress by using the "append table to report" vi which allowed me to put values into an array and then those values were entered into my template on my report vi.
Where I am stuck now is I want to be able to put values into my template from a .csv file, not from an array I have to manually put numbers in.
Once those values are in my template I want to pull summed values from the template and place them into a final excel file for printing.
I have attached examples of the files I am working with to help you better understand what I am trying to do.
I hope that makes sense.
Jason Phillips
Attachments:
HourlyTotalsTemplate.xls ‏120 KB
eb_rain_gauge_ss.csv ‏23 KB
EastBankHourlyRainReport.xls ‏28 KB

National Instruments releases LabVIEW Report Generation Toolkit for Microsoft Office.

The new LabVIEW Report Generation Toolkit for Microsoft Office is a library of flexible, easy-to-use tools for programmatically creating and editing Microsoft Word and Excel reports from LabVIEW. Whether you need to generate reports summarizing manufacturing test results or compile process statistics to improve your production yields, this toolkit speeds your development of customized, professional reports.
To see examples of this toolkit or get more information please visit :
http://www.ni.com/labview/report_gen_toolkit.htm

It is a bit limiting though. I built my own set of VI's, a toolkit if you will, that does some of what this tookit does. But, I also wrote some functionality that isn't available in NI's kit, such as creating charts as separate worksheets and linking the charts to data on another worksheet. All in all, the toolkit is great, but you can't get as much out of it as you can using the ActiveX calls yourself.

LabVIEW Report Generation Toolkit for Microsoft Office 1.1.2

Where is possible to buy LabVIEW Report Generation Toolkit for Microsoft Office v1.1.2?
Thanks.
Francisco

You are right, the page does not say that but the local distributor says that I have to purchase an update to the latest version of LabView: about USD 1000. I can't believe that.

LV Report Generation Toolkit for Microsoft Office says "This VI or item belongs to a library that is expired or invalidly licensed"

I have downloaded the LV Report Generation Toolkit for Microsoft Office for evaluation with LabVIEW 2010. The examples for the Help get many errors, including "The subVI is not executable. You must fix all errors in the subVI before this VI can run." and "This VI or item belongs to a library that is expired or invalidly licensed".
I selected that I wanted to evaluate the toolkit instead of putting an activation code during installation. Installation went OK.
How can I get the examples in this LV Toolkit to Run so that I can evaluate it?
Solved!
Go to Solution.

Also when I place the MS Office Report function in my block diagram, I get: "Unable to View Properties" popup message and no Contextual Help on the function.
How can I get these RGT function to work properly so that I can evaluate the toolkit?

Error involving Report Generation Toolkit and Labview Run Time Engine

Developed an application using LabVIEW 6.1 and LabVIEW Report Generation Toolkit for Microsoft Office 1.0.1. From there, tried to build a shared application for use with the LabVIEW Run Time Engine. The Run Time version functions properly until "New Report.vi" is called and then an error is generated, code 7, calling out "Open VI Reference in New Report.vi" could not be found. When building the application, I did include the "NI Reports Support" in the advanced installer options. The machine used for original development and application build is running Windows XP Pro and Office XP. Any suggestions??

I am having the exact same problem but with LV 6.1 and M/S WORD 2000. It appears that the "New Report.vi" is trying to open "C:\APP.DIR\Word_Open.vi" and "C:\APP.Dir\Word_Open_Document.vi" by reference. The "OFFICE 2000.TXT" says that "_exclsub.llb and _wordsub.llb must be added as support files when building an application or a dynamic link library with the application builder." I added them as Support Files and I copied them to the "C:\TESTER\" where the TESTER.EXE is and I still get ERROR 7 in "NEW REPORT.VI" at VI OPEN REFERENCE.
Do I need to make a "C:\TESTER\DATA\" sub-dir and put the support files there?
I am building on MY COMPUTER on F: Drive on a network and transporting files to the real Tester.
I displayed my App.Property of APP.DI
R at start up and it is C:\TESTER\ ! How would my application know that "Word_Open.vi" and "Word_Open_Document.vi" are actually inside the _wordsub.llb?
Any ideas ?
Greg Klocek

Add Report Generation toolkit for Microsoft Office in exe

Hi
I am having a problem. I am using LabVIEW 8.20, Report Generation Toolkit for Microsoft Office 1.1.2 and Microsoft Excel 2003. My OS is Windows XP (SP )
I want to build the vi attached below into an exe. The vis that I used are from addons>>_office>>excel.llb. I follow the suggestion found in the link below and add in all the files in excel.llb into my project so that it can be added into the executable as dynamic vis. However, some vis in excel.llb cannot be added into my project. After I have add all vis that can be added into the project, I build an application (exe) with the vi below as the Main vi and all other added vis (from excel.llb) as dynamic vis. After that, I build and run this exe on the same PC. I am unable to run it.
This vi will save datas when I click on the stop button. After I click on the stop button, a window will pop-up and prompt me to select which directory to save the vi. When I run the exe, I type in test.xls (for example) but the file saved is a picture and not an excel file. If I just run the vi instead of the exe, Excel will open and datas and graph will be displayed in Excel.
May I know where did I done wrong??
How do I use the Report Generation Toolkit in an executable with Microsoft Excel?
http://digital.ni.com/public.nsf/websearch/C38CE3F30542D65B86256F0E00740DD8?OpenDocument
Thank you & Regards
Lee
Attachments:
Self-Regulating.vi ‏132 KB
Untitled Project 1.zip ‏3841 KB

Hi centerbolt,
Thank you for your reply. I have tried adding in just that dynamic vi found in Excel Library and my main vi but it still cannot work. Is there anything that I need to look out as well?? [View attached picture.]
Thank you & Regards
Lee
Attachments:
added.JPG ‏92 KB

Control checkbox form field in word with report generation toolkit for Microsoft office

Hi all,
Happy New Year!
I insert in the word template the check box form field. It has a bookmark name "Check1".
Now I'm trying to checked or unchecked this field using the report generation toolkit for Microsoft office and I couldn't. If anyone now how to do it? I'm using LabView 8.0
Thanks in advance,
Boris
Solved!
Go to Solution.

Boris,
The Microsoft Office Toolkit does not have support for checking/unchecking check box forum field. You would have to research the activex functionality that enables this to be checked or unchecked and then do the activex calls yourself. I did hear of one csutomer who used a special font to write a blank box or a checkbox into a word document and changed it that way as well.
Maybe http://www.ozgrid.com/forum/showthread.php?t=53715 gives a hint to an activex reference
Rob K
Measurements Mechanical Engineer (C-Series, USB X-Series)
National Instruments
CompactRIO Developers Guide
CompactRIO Out of the Box Video

Problem with Reporte Generation Toolkit for Microsoft Office 2010

When I use the Report Generation Toolkit (LabVIEW 2010), and Office 2010, the tables generated are bad.
In office 2007 in the tables are correct.
Someone can help me solve this problem?

The solution referenced in your post does not actually workas far as I can tell... at least for LV2011 and Office2010 on Win7
Am I missing something here?
Attachments:
Testbench_ReportGen Table_BUG.vi ‏10 KB

Problem for Report Generation Toolkit for excel 2000

Hi all,
Now I am Developing my program with Report Generation Toolkit 1.1.0 and Labview 7.1.
In my computer I am using Excel XP, and there is not any problem. But when I build to
a exe file, and use in a computer with Excel 2000, it didn't work.
And I try to check the source file in this computer, I found that there any some connection
error. And this is caused by the active X class. As I know Excel 2000 is using Microsoft Excel
Object Library 9.0, but i cannot find it in the list of active x. So it is using Microsoft Excel Object
Library with a very old verison. So in the property node there are missing functions, such as the
UsedRange in _Worksheet in the Excel_Get_Range.vi. However, In VBA, I can find the 9.0 Library.
Is it the problem of 9.0 library? How can I solve the problem? How can I upgrade the library to 10.0?
Thanks.
Regard,
Ryan

Hi Mike,
Since my program is for all the staff in office, everyone may use it.
I cannot call the whole office to upgrade the excel to XP.
And I think Report Generation Toolkit is alway support Excel 2000,
since the old version of it is not support for Excel XP.
Regard,
Ryan

Can't print to Epson TM-U590 Slip Printer from Report Generation Toolkit with LabVIEW 8.6.1

Hi all,
I have an application that uses the Report Generation Toolkit to print tickets to a docket printer. Usually this works fine - I have 8 existing installations where there are no problems
I'm currently installing the software at a new site that uses an Epson TM-U590 slip printer and I can't for the life of me get printing to work
Using a Standard Report, the Print Report.vi returns error -41002 which indicates it can't find the printer. I've opened up the VI using remote debugging and it does find the printer name correctly with the Query Available Printers.vi. It gets an error code -2147352567 from the Printout node, which then gets replaced with the -41002 error which is reported.
For historical reasons I'm still using LabVIEW 8.6.1 for this project. I'm considering moving to 2011 or 2012 but I've had reliability issues with other parts of the application after attempting to update to a newer LabVIEW version so I'd like to avoid that at this stage.
The application is running on a standard desktop PC with Windows 7. The slip printer works fine if I print to it from Notepad, and my application is happy to print to any other printer, just not the slip printer.
The slip printer is using the LPT port. Previously the docket printers I've used have been USB but I would expect the printer driver to hide this detail from the application...
Any ideas would be much appreciated
Cheers
Brett
Senior Software Development Engineer
Certified LabVIEW Architect and LabVIEW Champion
Solved!
Go to Solution.

I've managed to sort out the problem, thanks to this KB article: http://digital.ni.com/public.nsf/allkb/67D60209102E2161862568AC0074BF64
I'm now having the same issue with a Star docket printer (a TUP592), this time with another program developed in LabVIEW 2011.
As mentioned in the article, the problem is actually to do with the margin settings rather than the printer name, despite what the error message says
After some experimentation, I've gotten the Star printer to work by setting a large (>14cm) right margin. No idea why this is required as it seems to print right up to the right edge of the paper quite happily, but there you go.
So I haven't defintely fixed the original problem yet as I haven't gotten back to the site, but hopefully this will be of some help to someone else.
Cheers
Brett
Senior Software Development Engineer
Certified LabVIEW Architect and LabVIEW Champion

Report Generation Toolkit and Labview 8 ?

I currently have Labview 7.1 on my computer, and Labview 8. I have installed the Report generation Toolkit 1.1.1, but when I try to open several of the excel and word vi's in labview 8, I get the error that "constants wired to case structures were changed to a hidden control to maintain compatibility with labview 7.1 and earlier". And therefore the subvi's don't run. Labview 7.1 doesn't have the toolkit installed, and I've even tried uninstalling 7.1 but nothing works. How do I fix this? Relinking to subvi hasn't work because it is not offered on any of the errored vi's or subvi's. The broken wires are going into invoke node vi's, but I don't know how to fix them. It doesn't allow me to rewire them.

If you dont want to use it in LabView 7.1, Just make a mass compile with LabView8.0 on the directory of you package.
It could solve a lots of that kind of problem.
Be sure that you do net need it with your previous version.
Benoit
Benoit Séguin
Software Designer

Report Generation toolkit for labview 2010

Similar Messages

Maybe you are looking for