Report Generation Toolkit labview 2013 64bits?

Muy buenas tardes.
Estoy buscando el Report Generation Toolkit para labview 2013 64bits, lo he buscado pero no logro encontrarlo y con este mismo pero de 32 bits me marca error al instalarlo.

Hola Antonio,
Intenta con esta liga : http://www.ni.com/gate/gb/GB_EVALTLKTREPGEN/US
Espero que por aqui lo puedas descargar,
saludos
Erwin Franz R.

Similar Messages

Remove worksheet VI - Report Generation Toolkit (LabVIEW 8.6)

Hello,
I am using the Report Generation Toolkit that ships with LabVIEW 8.6 for creating an Excel report. I am looking for a way to delete spreadsheets in a workbook. I did come across couple of message posts in the forum which mentioned about worksheet removal using some VIs that were shipped with previous version of LabVIEW. I could not find the built-in VIs in newer version of report generation toolkit (the one with LabVIEW 8.6).
Is there a way I could remove worksheets in LabVIEW 8.6?
Thank you.

Assuming you're using Report Generation Toolkit 1.1.4 with LabVIEW 8.6, you can use the following VI (in the Report Generation > Excel Specific > Excel Advanced subpalette) to gain access to your current Worksheet and/or Sheets object:
Note that this VI is not available in Report Generation Toolkit 1.1.3.
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Report Generation Toolkit failure with Win 7 and Labview 2013

I recently had my computer updated to Windows 7 and am now seeing a problem with the Report Generation toolkit (version 2013) when working with Excel files. If I try to run the New Report.vi with report type Excel selected I get error -2146777998. Doing the same thing with Word selected eventually opens Word, although this takes about ten seconds, but it does not generate an error. Selecting Standard Report or HTML also run without errors.
I've researched this error on line but I keep ending up .NET and C# forums where everything goes over my head. Has anybody got any suggestions?
Solved!
Go to Solution.

I found the solution to this particular source of error code -2146777998. There are two template files that reside in C:\Program Files (x86)\National Instruments\LabVIEW 2013\templates\Report by the name of MSOffice_RGT_Template.dot and MSOffice_RGT_Template.xlt. The problem came down to that these templates got corrupted somehow during the fresh install. As soon as I replaced them with versions from another machine the problem disappeared.
Just as a side note, I discovered the problem by kicking off the MS Office Report Express vi and out came a much clearer message that aimed me at the templates. Not quite sure why that message isn't echoed into the individual subvi's on the pallette, but life is a mystery.

Running macro on Table using Report Generation Toolkit and Office 2003 Incompatible!!!!!!!

Hi,
I am using some functions under the Report Generation toolkit (LabView 7.1). We recently updated our test PCs from Office 2000 to 2003. The "WORD IMPORT MODULE.VI" returns error code -41113 when used with Word 2003. No problem on Word 2000.
In fact even the example VI available under Find Examples - Run Macro on Word Table fails and returns error code -41113 when "WORD IMPORT MODULE.VI" is called on Word 2003. Word 2000 is OK.
Any one faced this problem???? Any solution to this problem??
I would greatly appreciate your feedback / suggestions.
Thanks,
Mim

darren,
thanks for your reply.
After checking the the property "Trust access to Visual Basic Project" , I get the following error message:
Exception occured in Microsoft Word, Unable to run the specified macro. Help Path is C:\Program Files\Microsoft Office\OFFICE11\1033\wdmain11.chm and context 37401 in Word Run Macro.vi->SetFirstRowAsTableHeaderforWord(Macro).vi->Generate Report.vi
I can run the macro directly from Word.. no problem running macros in Excel dirently either. I get error message only when running macro from LabView. So, I doubt if it is an IT issue.
You don't have a problem with Word 2003 and Word Import Module.vi???
I am attaching my Vi-Report Generation.vi and the subvi. I would so much appreciate if you run ReportGenerate.vi on your PC and let me know if there is a problem.
Many Thanks for your help.
Mim
Attachments:
ReportGeneration.zip ‏75 KB

Problem with Reporte Generation Toolkit for Microsoft Office 2010

When I use the Report Generation Toolkit (LabVIEW 2010), and Office 2010, the tables generated are bad.
In office 2007 in the tables are correct.
Someone can help me solve this problem?

The solution referenced in your post does not actually workas far as I can tell... at least for LV2011 and Office2010 on Win7
Am I missing something here?
Attachments:
Testbench_ReportGen Table_BUG.vi ‏10 KB

Labview 2013 report generation toolkit word 2010 insert table problem

Hi,
I am currently evaluating LV2013 with respect to the report generation toolkit for use with word 2010. My Vi/program won't insert the correct table and gives me an error message. see below:-
Exception occured in Microsoft Word: The requested member of the collection does not exist.Help Path is wdmain11.chm and context 25421 in NI_ReportGenerationToolkit.lvlib:Word_Insert_Table.vi->NI_Word.lvclass:Append Text Table to Report.vi->Word Table save.vi
I have since run the following word example.vi provided by NI within LV2013 office examples:- Growable table.vi. this gives me the same error!
Exception occured in Microsoft Word: The requested member of the collection does not exist.Help Path is wdmain11.chm and context 25421 in NI_ReportGenerationToolkit.lvlib:Word_Insert_Table.vi->NI_Word.lvclass:Append Text Table to Report.vi->Growable table.vi
It would seem that regardless of my own Vi there is a fundamental problem in the office example vi.
I have found examples of a similar problem in LV2011/2012 but the work around code doesn't seem to match the LV2013 vi's code for a direct replacement.
Can anyone help/shed some light on this?
Thanks in advance,
Dan.

Because the upgrade of Word from 2007 to 2010 I needed to upgrade an existing application from LabVIEW 2009 to 2013. This didn't work because of the insert table error. I discovered that the problem is the vi called "Word_Insert_Table.vi" located in the ..Program Files (x86)\National Instruments\LabVIEW 2013\vi.lib\addons\_office\_wordsub.llb. There is a "Cut" command implemented, this command removes the created cell instead of clearing it. Therefore the table will be filled half and then returnes with an error. I have removed this command. I have posted the changed vi (LV 2013).
Attachments:
Word_Insert_Table.vi ‏30 KB

Where can i download the trial version of the Labview 2013 64bit Report Generator Toolkit for Microsoft Office?

Hi all,
I am having trouble locating a LabVIEW Toolkit. Could somebody please send me a link to somewhere where I can download the eval version of the Report Generator Toolkit for Microsoft Office for LabVIEW 2013 64bit.?
Thank you in advance,
Bob

Yes here is the 2013 version.
http://download.ni.com/evaluation/labview/ekit/other/downloader/2013RGT_downloader.exe
And here is the 2014 version.
http://ftp.ni.com/evaluation/labview/ekit/other/downloader/2014RGT_downloader.exe
I believe both are for 32 bit LabVIEW, which works in both 32 bit and 64 bit Windows. Honestly until all toolkits support 64 bit Windows, I still don't see much of a reason to go with 64 bit LabVIEW. The support is just better with 32 bit.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Report Generation Toolkit Compatibility with Microsoft Office 2013 and LabVIEW 2012

Hello community,
on this page there is shown the Report Generation Toolkit Compatibility with Microsoft Office and LabVIEW.
In our company we use actually LabView 2012 and it works perfectly with MS Office 2010.
Has anyone ever tried the "Report Generation Toolkit" of LabVIEW 2012 with MS Office 2013? Does it really not work? Has anyone an emirical value for this topic?

Hi digital_badger,
as you sure have seen in the link it is not officially supported by NI, which means to you one of the following things:
1. You could upgrade your LabVIEW and your Report Gerneration Toolkit to Version 2014 and use MS Office 2013
2. You could just try it with MS Office 2013 which might work but if it's not working you don't get any support from NI.
Even if someone tried it already and it worked for him does not mean that it will work on your machines. It is possible that on some of your machines it could work but not on others. Their can be a lot of problems while playing around with unsupported setups.
3. You could leave your setup as it is and stick to your MS Office 2010.
I hope I could give you a good answer to your question

Word report generation toolkit error with Win 7 LabVIEW 2013, Word2010

Hi All
I'm seeing different Errors using the Report generation toolkit. Maybe you can help me with that.
The errors are:
-2147417846, application is busy in Word_Get_range.vi
-2146824090 Exception in Microsoft word: Befehl misslungenHelp Path is wdmain11.chm and context ...
-2147417846 application is busy in Word_Quit.
the error messages are attached to the post.
I'm testing 10 sensors with one application and want to run up to 5 applications on one computer. Since I'm seeing such errors as application is to busy I set all my report generation vi's as non-reentrant execution and additionally added some pause after each word modification.
But I'm still seeing such errors when I run two applications on one computer.
What is the best way to deal with these errors?
thanks
best regards
Urs
Attachments:
exceptionerror.PNG ‏20 KB
BusyActiveX2.PNG ‏20 KB
BusyActiveX.PNG ‏22 KB

Here my Vi's involved in creating the report.
Is there a way to check wheter word is busy or already open?
Attachments:
save report as PDF.vi ‏26 KB
create_report.vi ‏70 KB
Word_Update_Table.vi ‏34 KB

Error involving Report Generation Toolkit and Labview Run Time Engine

Developed an application using LabVIEW 6.1 and LabVIEW Report Generation Toolkit for Microsoft Office 1.0.1. From there, tried to build a shared application for use with the LabVIEW Run Time Engine. The Run Time version functions properly until "New Report.vi" is called and then an error is generated, code 7, calling out "Open VI Reference in New Report.vi" could not be found. When building the application, I did include the "NI Reports Support" in the advanced installer options. The machine used for original development and application build is running Windows XP Pro and Office XP. Any suggestions??

I am having the exact same problem but with LV 6.1 and M/S WORD 2000. It appears that the "New Report.vi" is trying to open "C:\APP.DIR\Word_Open.vi" and "C:\APP.Dir\Word_Open_Document.vi" by reference. The "OFFICE 2000.TXT" says that "_exclsub.llb and _wordsub.llb must be added as support files when building an application or a dynamic link library with the application builder." I added them as Support Files and I copied them to the "C:\TESTER\" where the TESTER.EXE is and I still get ERROR 7 in "NEW REPORT.VI" at VI OPEN REFERENCE.
Do I need to make a "C:\TESTER\DATA\" sub-dir and put the support files there?
I am building on MY COMPUTER on F: Drive on a network and transporting files to the real Tester.
I displayed my App.Property of APP.DI
R at start up and it is C:\TESTER\ ! How would my application know that "Word_Open.vi" and "Word_Open_Document.vi" are actually inside the _wordsub.llb?
Any ideas ?
Greg Klocek

How to obtain the table index in word use LabVIEW Report Generation Toolkit for Microsoft Office

I created a word templete and it had several tables. When I use the "Word Edit Cell" function in LabVIEW Report Generation Toolkit for Microsoft Office, the function need "table index", and I didn't find any function to get or set the table index in word document. How can I achieve my attention to write value to specified table cell using the "Word Edit Cell" function?
Thanks for reply!
YangAfreet

Hi yangafreet
You do not need to get the table index for the word edit cell.vi from anywhere. LabVIEW will automatically index all the tables in the document. See the attatched vi for an example.
Rich
Attachments:
Table Edit.vi ‏23 KB

Can't print to Epson TM-U590 Slip Printer from Report Generation Toolkit with LabVIEW 8.6.1

Hi all,
I have an application that uses the Report Generation Toolkit to print tickets to a docket printer. Usually this works fine - I have 8 existing installations where there are no problems
I'm currently installing the software at a new site that uses an Epson TM-U590 slip printer and I can't for the life of me get printing to work
Using a Standard Report, the Print Report.vi returns error -41002 which indicates it can't find the printer. I've opened up the VI using remote debugging and it does find the printer name correctly with the Query Available Printers.vi. It gets an error code -2147352567 from the Printout node, which then gets replaced with the -41002 error which is reported.
For historical reasons I'm still using LabVIEW 8.6.1 for this project. I'm considering moving to 2011 or 2012 but I've had reliability issues with other parts of the application after attempting to update to a newer LabVIEW version so I'd like to avoid that at this stage.
The application is running on a standard desktop PC with Windows 7. The slip printer works fine if I print to it from Notepad, and my application is happy to print to any other printer, just not the slip printer.
The slip printer is using the LPT port. Previously the docket printers I've used have been USB but I would expect the printer driver to hide this detail from the application...
Any ideas would be much appreciated
Cheers
Brett
Senior Software Development Engineer
Certified LabVIEW Architect and LabVIEW Champion
Solved!
Go to Solution.

I've managed to sort out the problem, thanks to this KB article: http://digital.ni.com/public.nsf/allkb/67D60209102E2161862568AC0074BF64
I'm now having the same issue with a Star docket printer (a TUP592), this time with another program developed in LabVIEW 2011.
As mentioned in the article, the problem is actually to do with the margin settings rather than the printer name, despite what the error message says
After some experimentation, I've gotten the Star printer to work by setting a large (>14cm) right margin. No idea why this is required as it seems to print right up to the right edge of the paper quite happily, but there you go.
So I haven't defintely fixed the original problem yet as I haven't gotten back to the site, but hopefully this will be of some help to someone else.
Cheers
Brett
Senior Software Development Engineer
Certified LabVIEW Architect and LabVIEW Champion

I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...

I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...

Hi Leo22,
Does this error occur if you use any of the example programs that come shipped with LabVIEW? I would try opening one of the examples that write data to Word and see if those give you an error. Also, have you tried just putting down a New Report.VI and change the report type to Word? If this simple vi (that's all you need to open Word) breaks, I would check to see if there are any instances of Word still open. Check the task manager to see if any word processes are still open. There should not be a problem accessing Word 2003 from LabVIEW 7.0. If neither of these solutions work, please give some more detail about your application and we can research further. Thanks!
Jeremy L.
National Instruments
Jeremy L.
National Instruments

LabVIEW Report Generation Toolkit for Microsoft Office

Hi!
One question. I have bought the LabVIEW Report Generation Toolkit for Microsoft Office
Version 1.0a and am trying to install it under Labview 7.1 but the installation stops with the error: "you need a Labview Version 6.0 runtime engine." Is there any possibility to install the toolkit anyway?
Regards
Stefan

Hi
You can try to update your Version 1.0 to Version 1.0.1. Then it should be working.
Here ist the link for the free update:
http://digital.ni.com/softlib.nsf/websearch/19003CF70BB8A57186256E5A00672E2A?opendocument
if it not works you can try to install the runtime engine 6.0 on your system. her is the link:
http://digital.ni.com/softlib.nsf/websearch/D5F11A64A905DB27862569EC005E31E2?opendocument&node=132070_US
Regards
Manuel

LabVIEW VI with Report Generation Toolkit elements in a TestStand sequence does not run with a LabVIEW 8.5 Run-Time Engine

Hi all,
I am using LabVIEW 8.5.1 and TestStand 4.1. I have done a TestStand sequence with a VI in it, which uses Report Generation Toolkit elements. On my machine I am using LabVIEW and TestStand with a Development System license. On the other machine I am using TestStand with a Base Deployment license and I have chosen the LabVIEW 8.5 Run-Time Engine in the Adapter Configuration. Everything is running well except of this VI with Report Generation Toolkit elements. The error message is showing that the VI is not executable. It works well only after I have installed LabVIEW with an Evaluation license and chosen LabVIEW 8.5 Development System in the Adapter Configuration.
I have found other posts and a document in the KnowledgeBase with a similar problem: http://digital.ni.com/public.nsf/allkb/8A0E6274D9BD7B1986256F62006AD402?OpenDocument But I am not using EXE files in my sequence, so I don't know how to solve mine. Anybody has an idea?
Solved!
Go to Solution.

Hello guys,
thank you very much for your answers!
@Ruediger:
I tried to follow the instruction for Method 2 in the mentioned document: http://digital.ni.com/public.nsf/allkb/F3DC40A6E3F3B25B862570AD005D1D3D?OpenDocument, but the steps on my machine are different starting from step 4. After I click "Continue..." in step 3, I dont get a window, the system just makes a new folder with the same VI.
To be honest, I am new to LabVIEW and have some difficulties at this time. What I understood from your reply is, that I need to make a LLB-File, where the files from Report Generation Toolkit are in!?
@GovBob:
I was following the instruction in the document: http://digital.ni.com/public.nsf/allkb/9E00E7EFE0635E678625734600779EFE, but it wasnt working. Can you please tell me how I can check if the VI Server is installed and running on the machine?
I am using LabVIEW 8.5.1 and TestStand 4.1 on my machine, on the deploy machine there is TestStand 4.1.1. The version of my Report Generation Toolkit is 1.1.2.
Kind regards, Roman

Report Generation Toolkit labview 2013 64bits?

Similar Messages

Maybe you are looking for