Report gets cancelled or terminated after eight hours

While doing load testing of reports, all of my reports got cancelled or terminated after eight hours. I bang the report server and database with 30 long running reports using RWCGI60. The rwcgi60/showmyjobs shows that all are running for 8 hours and after that boom... all gets cancelled one by one with in a five minute period. I still see the SQL session activity on database. The report server log says the server engines are crashed one after the other. I have Maxengine set to 15. When I submit 30 reports I see 15 running and 15 enqueued.
Is there any timeout parameter set on RWCGI60 where by it lost contact of database? RWCLI60 works fine and finished all reports.
Thanks and Please let me know if you further information...

Hi
The timeout is a seeting in http server on which you host Reports CGI. Once that time limit is reached and no output is written, the web server would time out for that request. Reports CGI does not have any timeout parameter property.
Thanks
Rohit

Similar Messages

  • TS4036 Trying to restore, I've tried a dozen networks and I keep getting a "lost connection" after an hour or two, EVERYTIME. Using Cox Wi-fi with a net gear 300 router. Any suggestions?

    Trying to restore, I've tried a dozen networks and I keep getting a "lost connection" after an hour or two, EVERYTIME. Using Cox Wi-fi with a netgear 300 router. Any suggestions?

    Thanks, helped me figure out a bigger problem there was with my router's access control and all kinds of crazy numbers that needed to be changed, but I got it.
    Problem is fixed as far as I can tell!

  • How to get last geo position, after 24 hours offline?

    I lost my iphone 5. Then i use the app "find my iphone". And it told that its offline, and i coudnt see the last geo position. How can I get last geoposition?

    Unless you installed a "finder" app that would upload that information there is no way to get previous locations.

  • Half of my iPhone 4 is heating up even after 15 mins of usage .earlier it was not getting heat up even after 1 hour of usage the problem has started after 6.1.2 update is it normal

    mins

    I have factory reset my phone twice.. I have disabled iCloud settings.. I looked up possible downgrading options.. which isn't possible. I feel as if my iPhone 4 was offered the update so I was forced to get another phone

  • I can't get a gps fix after 2 hours of waiting.

            It's really sad that just by updating 2 latest fimware(in this case from belle to belle reresh 111.040.1511.c05.01), i haven't been able to get my position through the built in integrated gps. I have tried activating the A- GPS and standing in an open space free from obstructions like trees and tall buildings for thirty minutes to get the first fix .I  have also tried downloading software like legpsdata which shows between 10 - 13 gps satellites in view but no satellites used and also soft resetting (*#7370#) and hard resetting it. I have changed the positioning server to supl.google.com and proritising it but to no avail. This is really frustrating to me because i always enjoyed using the gps feature of this phone, which competes favourably with most stand alone gps available in the market. Please i hope i can get any form of assistance from the community members. Thanks!
    Solved!
    Go to Solution.

    Hi,
    I have the same issue with a C7. GPS position search is very low. I'd read several topics in this question, but still did not find solution. I cant find suggested LeGPS, but I installed infogps which is not able to find satelits in 20 mins. I want to use A-GPS, but does not work at all. it looks, cant find network(which works). When I start maps the data sign is blinking (3G) but data traffic remains 0,0 kB. dont know why. I have an older 5230 (I beleive) which is able to position in 3-4 secs inside the house and I can see the increasing data traffic number. When I compared the settings with the 5230 and there I can provide the mobile access point (which network connection to be used) which cannot be setup on the Belle.
    settings:
    positioning - positioning methods: Assisted GPS, Integrated GPS, Network Based
    positioning server - server settings - supl.nokia.com , only in home network: No
    map settings:
    connection: online
    Network destination: Internet
    Can anyone help? is there any workaround how to force A-GPS?
    Nokia Belle Refresh 111.040.1511
    map version: v3.09 12wk20 b01
    Thank you!

  • Just wondering when charging iphone 4s phone gets warm then after an hour cools is that normal many thanks

    Hi just wondering when l charge up my iphone 4s  it gets warm and then after an hour it cools down is that normal many thanks Sam

    A charging battery of any kind gets warm. That is quite normal.
    About Batteries in Modern Apple Laptops
    Apple - Batteries - Notebooks
    Extending the Life of Your Laptop Battery
    Apple - Batteries
    MacBook and MacBook Pro- Mac reduces processor speed when battery is removed while operating from an A-C adaptor
    Battery University
    Apple - Batteries - iPod
    Apple - Batteries - iPhone
    Apple - Batteries - iPad
    Apple Portables- Calibrating your computer's battery for best performance
    Mac notebooks- Determining battery cycle count
    How to Calibrate Your Mac, iPhone, or iPad Battery | MacBlend

  • HT1414 i give up.  ive tried to update my wife's iphone.  each time after an hour or two, i get a message that it is cancelling the backup.  it wont update.

    well, i finally made it thru the maze that is apple security, matched all the password rules, and never using the same password twice only to be shut down again when i tried to update my wife's iphone.  after two hours i get a message that says its cancelling the back up.  No other messages or errors or anything.  Just cancelling the backup.  This has happened consistently 5 times. 
    Do these updates work for anyone?
    What is necessary.

    The update requires approximately 3GB of storage space.
    Tap Settings > General > About
    Swipe down. You'll see:  Available
    If it's less than 3GB's you need to delete apps, photos, etc to free up storage space in order to udpate to iOS 7.

  • Report J_1IEWT_CERT getting cancelled, generating ABAP dump!

    A long running report J_1IEWT_CERT in background mode is getting cancelled after running for a while and generating the following dump :
    Error analysis
        When changing or deleting one or more lines of the internal table
        "\PROGRAM=J_1IEWT_CERT\DATA=PRINTTAB[]" or when inserting in the table
         "\PROGRAM=J_1IEWT_CERT\DATA=PRINTTAB[]", 0 was used as
        the line index. An index less than or equal to zero is not
        allowed.
        The error can occur when using the following options:
        1. "INDEX idx" for specifying the line number in the table
         "\PROGRAM=J_1IEWT_CERT\DATA=PRINTTAB[]"
           where you want to change, insert or delete.
        2. "FROM idx" for specifying the start index when deleting a line
           area from or inserting a line area into the table
         "\PROGRAM=J_1IEWT_CERT\DATA=PRINTTAB[]".
        3. "TO idx" for specifying the end index when deleting a line
           area from or inserting a line area into the table
         "\PROGRAM=J_1IEWT_CERT\DATA=PRINTTAB[]".
        At the time of the termination, the table contained 17008 lines.
    How to correct the error
        If the error occurred in your own ABAP program or in an SAP
        program you modified, try to remove the error.
        If the error occures in a non-modified SAP program, you may be able to
        find an interim solution in an SAP Note.
        If you have access to SAP Notes, carry out a search with the following
        keywords:
        "TABLE_INVALID_INDEX" " "
        "J_1IEWT_CERT" or "J_1IEWT_CERT_F01"
        "FILTER_DATA"
        If you cannot solve the problem yourself and want to send an error
        notification to SAP, include the following information:
        1. The description of the current problem (short dump)
           To save the description, choose "System->List->Save->Local File
        (Unconverted)".
        2. Corresponding system log
           Display the system log by calling transaction SM21.
           Restrict the time interval to 10 minutes before and five minutes
        after the short dump. Then choose "System->List->Save->Local File
        (Unconverted)".
        3. If the problem occurs in a problem of your own or a modified SAP
        program: The source code of the program
           In the editor, choose "Utilities->More
        Utilities->Upload/Download->Download".
    Tried searching for some SAP Notes to fix the issue, no success as of now, Please help me out...

    Have you checked these notes ?
    363107 Short dump occurs during TDS certificate printing.
      803806  Error while genrating TDS certificate 03.01.2005
      1066049  J1INCERT - Error while generating TDS certificate
    Regards,
    Subhash

  • Job E2E_HK_CONTROLLER getting canceled daily after EHP1 upgrade

    Hi, All,
    We upgraded solman system to EHP1.Since then; this job is getting canceled daily with following error:
    Job Log:
    Job started
    Step 001 started (program E2E_HK_CONTROLLER, variant , user ID SMD_RFC)
    Internal session terminated with a runtime error (see ST22)
    Job cancelled
    ST22 Dump log shows time out dump
    Current patch level is 04
    Kindly suggest how can this be solved

    Hi,
    Details are:
    Runtime Errors         TIME_OUT
    Date and Time          07.01.2010 01:30:54
    Short text
         Time limit exceeded.
    What happened?
         The program "SAPLRRSI" has exceeded the maximum permitted runtime without
         interruption and has therefore been terminated.
    What can you do?
         Note down which actions and inputs caused the error.
         To process the problem further, contact you SAP system
         administrator.
         Using Transaction ST22 for ABAP Dump Analysis, you can look
         at and manage termination messages, and you can also
         keep them for a long time.
    Error analysis
        After a specific time, the program is terminated to make the work area
        available to other users who may be waiting.
        This is to prevent a work area being blocked unnecessarily long by, for
        example:
        - Endless loops (DO, WHILE, ...),
        - Database accesses with a large result set
        - Database accesses without a suitable index (full table scan)
        The maximum runtime of a program is limited by the system profile
        parameter "rdisp/max_wprun_time". The current setting is 3600 seconds. If this
    Roll.... 16192
    EM...... 594970672
    Heap.... 0
    Page.... 16384
    MM Used. 585663104
    MM Free. 9274032
    r and Transaction
    Client.............. 100
    User................ "SMD_RFC"
    Language Key........ "E"
    Transaction......... " "
    Transactions ID..... "4B446D5B2E061DFFE10000003630905C"
    Program............. "SAPLRRSI"
    Screen.............. "SAPMSSY1 3004"
    Screen Line......... 2
    Information on caller of Remote Function Call (RFC):
    System.............. "PS1"
    Database Release.... 701
    Kernel Release...... 701
    Connection Type..... 3 (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
    Call Type........... "synchron and non-transactional (emode 0, imode 0)"
    Inbound TID.........." "
    Inbound Queue Name..." "
    Outbound TID........." "
    Outbound Queue Name.." "

  • Report program when run in background job getting cancelled immediately

    Hi
    When i run a program in foreground i am able to see the output. But when run in background not able to run the job successfully. The job is getting cancelled immediately.
    I am using the below function module for output display. Should i need to pass any parameters in the below function module so that i can run the program in background  successfully.
      CALL METHOD DETAIL_GRID->SET_TABLE_FOR_FIRST_DISPLAY     
          EXPORTING                                            
            IS_LAYOUT         = IS_LAYOUT                    
            I_SAVE            = 'A'                        
            IS_VARIANT        = GS_VARIANT                   
          CHANGING                                           
            IT_FIELDCATALOG   = IT_FIELDCATALOG               
            IT_OUTTAB         = BLOCKED_STOCK_TAB_ALV[].     
    Please suggest.
    Thanks and regards
    Rajani Yeluri

    Hi Rajani.
      ALV require the DRYPOR(screen) for display but incase you run in back ground which have to write to spool but in spool we can only write in format of LIST REPORT not inter-active report like ALV. That why
    system cancelled your process immediately.
    Hope it helps.
    Sayan.

  • When trying to update apps an invalid apple id show up and I cannot get the apple id to update to the same id,  I have restored, restored as a new phone, I have been into the manage I am at wits end after 7 hours on hold and working with techs.

    When trying to update apps an invalid apple id show up and I cannot get the apple id to update to the same id,  I have restored, restored as a new phone, I have been into the manage I am at wits end after 7 hours on hold and working with techs.

    Finally got through to tech support and found someone who seemed to know what was going on, he walked me through and using appleid.applesupport got me to a point where i could get a new password for the apple id that kept showing up. 
    I think you were on the right trail and I want to say thanks for your help.  Much appreciated
    ccl43

  • I've tried downloading iOS5 several times and after an hour each time I get a message that says my network connection has timed out.  But I can't find any information about "timing out" or how to correct the situation.  Any help?

    I've tried downloading iOS5 several times and after an hour each time I get a message that says my network connection has timed out.  But I can't find any information about "timing out" or how to correct the situation.  Any help?

    Disable your antivirus and firewall, and try again.

  • Background Job get Cancelled when executing the report. Reason?

    Hi All,
    I have scheduled a Back ground Job and executed Immediately.
    when checking transacion SM37 the job get canceled.
    How to find out the problem for the Job Cancellation.
    Regards,
    Viji

    hi
    After scheduling back ground job ( give a time laps of 2 min )
    then go to sm37 ( at this moment , the job is not yet started) .
    select ur job in sm 37 and when job starts processing , type JDBG as the command and press enter.
    Now it will go to the debugging screen, where u will find system program . Now set a break point at the stements used in ur program from the debugging screen itself.( menu - breakpoint- breakpoint at - statement ) and press F8 .
    Now you can start debug ur code.
    Revrt back if any issues.
    Regards,
    Naveen

  • Firefox automatically crashes after 4 hours of use and only when a textbox is being used - problem now daily and getting worse

    This has been going on for a few weeks and started of it's own accord. I have not recently installed any new plugins or scripts, and my PC is protected by two antivirus products and so my system (WinXP) is malware free.
    I can browse firefox for up to 4 hours, and then it crashes. No matter what sites I am using, what I am doing or even if I'm at the PC... so long as there's a text box on the page then firefox will crash if the 4 hour time limit expires. I can be just about to save an hours worth of photo captions and lose all that work due to the crash, or can be in the middle of a background download but it'll still crash... daily.
    I thought this was a plugin issue, as I have disabled all plugins for javascript handling, flashgot, etc, but still it crashes. (previously on startup Firefox would hang for 5 to 10 minutes and the system would "bing" at me if I tried to click on the firefox window... eventually a 'non responsive script' window would appear relating to a flashgot script). The crash used to go whereby suddenly the page would freeze for a few seconds, followed by a minute or two of safe working, then 2 minutes of freeze and 30 seconds of safe working, with the ratio of freeze-tim:working time working in 20 seconds increments until firefox crashed... now though there is no warning, the page freezes and then it's gone. I have updated firefox several times and still the problem persists. On a previous computer, Firefox degraded to the point where it froze for 4 minutes on any page with a Flash application... now on this computer it has degraded by itself to the point where it crashes after 4 hours of use.
    I'm presently using Internet Explorer to type this question because firefox crashed again and I'm not going to sit waiting for it to reload just to get a few numbers from an information screen... therefore further info like crash ID's etc will be update in due time....

    Cool, I'll try using the wall adaptor just as soon as I get a convertor for it to convert it to our socket type. It's nice to hear that someone else has experienced the same issue.
    I am not using it as a phone in Australia, just the ipod and wifi.

  • Reporting Agent job getting cancelled

    Hi all,
    Jobs scheduled using Reporting Agent to load data into cache memory is getting cancelled with the below mentioned message in the job log.
    System error in program SAPLRRK0 and form SX_TO_BDATA_ELSE-02- (see long text)
    What could the possible reason ? Please help.
    Regards,
    Surjit P

    Hi Amit,
    Tried it. But dint work.
    Regards,
    Surjit

Maybe you are looking for