Report gives strange behavior
Hi Gurus,
I am facing strange problem with my oracle report 10GR2 release. Problem is, when user runs a report in early part of the morning from application server, the report runs normally and it generates the PDF file with proper data. But when the same user runs the same report in later part of the day with the same parameters as he gave in the morning, the report doesn't shows any result on generated PDF file.
At the same time if we run the report query in the data base from sqlplus, it gives the proper output. I have checked the server log and the report trace file also but I didn't found any special and abnormal thing in the log file. I have asked the application DBA also to look into this problem but they are not able to identify the problem.
The problem occurs only in production database in acceptance and test I am not able to simulate the condition.
Do any one knows the strange behavior of the report on the application server? If more information is required then please ask.
Thanks in advance.
When you say that the PDF is not generated what exactly happens
a. The report is not generated at all and a blank page is shown up even after a prolonged period of time
or
b. Some error is thrown (REP errors)
Apart from this, what is the value set of maxConnect attribute in reports server configuration file located in <ORACLE_HOME>\reports\conf directory.
Edited by: Anand on Nov 20, 2010 9:43 AM
Similar Messages
-
Report FP_TEST_00 - Strange behavior
Hello Gurus,
A strange behavior with report FP_TEST_00 occurs:
SA38 --> FP_TEST_00 --> select a device --> execute --> print preview then and error or popup is show:
Adobe Reader
Error initializing the font server module
Then the SAP GUI is closed, I check the ST22 and no dump is generated and in transaction SM21 only appear:
DP Q0 4 Connection to user 551 (ADMIN ), terminal 86 (HUSVP-SAP-BA) lost
DP Q0 I Operating system call recv failed (error no. 232 )
The #1 log entry: *
Details Page 2 Line 28 System Log: Local Analysis of sapdev 1
Time Type Nr Clt User TCode Grp N Text
11:37:20 DP Q0 4 Connection to user 551 (ADMIN ), terminal 86 (HUSVP-SAP-BA) lost
Connection to user 551 (ADMIN ), terminal 86 (HUSVP-SAP-BA) lost
Details
Recording at local and central time........................ 25.02.2010 11:37:20
Task...... Process User...... Terminal Session TCode Program Cl Problem cl Package
11092 Dispatcher K SAP Web AS Problem STSK
Further details for this message type
Module nam Line Error text.......... Caller.... Reason/cal
dpxxdisp 1223 551 ADMIN 86 HUSVP-SAP-BA DpRTmPr NiBufRe
Documentation for system log message Q0 4 :
The SAP Dispatcher (part of the application server) has lost the
connection to a terminal process. For example, this happens when the
terminal program (GUI) terminates without correctly logging off the
application server. More detailed information about the error
context is not available here.
Technical details
File Offset RecFm System log type Grp N variable message data
21 254340 m Error (Function,Module,Row) Q0 4 551 ADMIN 86 HUSVP-SAP-BA DpRTmPrNiBufRedpxxdisp1223
The #2 Log show: *
Details Page 2 Line 29 System Log: Local Analysis of sapdev 1
Time Type Nr Clt User TCode Grp N Text
11:37:20 DP Q0 I Operating system call recv failed (error no. 232 )
Operating system call recv failed (error no. 232 )
Details
Recording at local and central time........................ 25.02.2010 11:37:20
Task...... Process User...... Terminal Session TCode Program Cl Problem cl Package
11092 Dispatcher K SAP Web AS Problem STSK
Further details for this message type
Module nam Line Error text Caller.... Reason/cal
nixxi.cp 4435 recv232 NiIRead recv
Documentation for system log message Q0 I :
The specified operating system call was returned with an error.
For communication calls (receive, send, etc) often the cause of errors
are network problems.
It could also be a configuration problem at operating system level.
(file cannot be opened, no space in the file system etc.).
Additional specifications for error number 232
Name for errno number ECONNRESET
No documentation available for error ECONNRESET
Technical details
File Offset RecFm System log type Grp N variable message data
21 254520 m Error (Function,Module,Row) Q0 I recv232 NiIReadrecv nixxi.cp4435
Edited by: Hernando Polania Cadena on Feb 25, 2010 8:36 PMHello All,
I applied the solution in page
http://wiki.sdn.sap.com/wiki/display/PLM/Adobe%209%20-%20SAPGUI%20crash
Works OK
Thanks
Hernando -
Strange behavior of BAPI_SALESORDER_SIMULATE
Hi All,
I am using standard BAPI - BAPI_SALESORDER_SIMULATE , to simulate the sales order creation.
But this BAPI gives strange behavior for different customers but same material combination.
I get incorrect schedule line for one customer.
The material is a non-stock material and purchase requisition is generated for each material to vendor.
The sales area is same for both the customers, while executing the BAPI.
However, for same material but for different customer, schedule line appears incorrect and different for these two customers.
Can you help me on this ?
Thanks,
SarangHi All,
I am using standard BAPI - BAPI_SALESORDER_SIMULATE , to simulate the sales order creation.
But this BAPI gives strange behavior for different customers but same material combination.
I get incorrect schedule line for one customer.
The material is a non-stock material and purchase requisition is generated for each material to vendor.
The sales area is same for both the customers, while executing the BAPI.
However, for same material but for different customer, schedule line appears incorrect and different for these two customers.
Can you help me on this ?
Thanks,
Sarang -
Strange behavior in report Output
Hi,
Strange behavior in report output , please some one help me out of this problem.
I am using Oracle order capture rdf file ASOPQTEL.rdf.
My working environment:
Windows,apps instance .Now this rdf file is working fine in my work Environment.
when this same file is deployed in client environment (UNIX and different apps instance from my working environment apps instance)
for some cases it is giving output.
for some cases it's throughing error.
Thanks,
MithunPlease specify what kind of error you are getting and what is command you are firing on Unix.
-
Strange behavior in Financial Reports (drop down feature)
Hello Gurus,
I have currently performed migration of Financial Reports from 11.1.1.3 environment to 11.1.2.2 environment with the help of a staging environment.
We migrated the reports over to 11.1.2.2 using LCM from the Staging 11.1.2.2 environment.
We are observing some strange behavior with the Financial Reports that have drop down functionality in our new environment.
When we open a report in our current environment (113) and select a particular member (India) from the Page dimension(Page has almost 30 members in it) it returns appropriate data, however when the same report is opened in new environment (122) and when we select the same member(India), it does not return appropriate data(Page has almost 30 members in it).
However if we design a sample report with the same member in the page (Page has only 1 member (India)) and then open the report it shows correct data.
So the issue occurs only when we have more than 1 members in page and it works as expected when we have only 1 member in page.
Any help would be highly appreciated.
Thanks,
hyperionEPMHello Neeraj,
We are trying to understand the potential reason as to why is it causing this. Is there anything similar caught in .303 patch?? I will have a look at the .303 patch readme.
Thanks,
hyperionEPM -
Strange behavior in Webi : No data returned
Hi,
I am experiencing a strange behavior.
I have created a condition object in universe.
Start Date : DATE_DIM_TBL.DAY >= UPPER(to_char(to_date(@prompt('Enter start date','D',,mono,free),'dd/mm/yyyy HH24:MI:SS'),'dd-mon-yy'))
End Date : DATE_DIM_TBL.DAY <= UPPER(to_char(to_date(@prompt('Enter end date','D',,mono,free),'dd/mm/yyyy HH24:MI:SS'),'dd-mon-yy'))
Now when I create report to display years between 01-05-2005 and 04-05-2009. Report does not return any data.
Where as when I execute the generated query from SQL prompt it return correct data.
SELECT
DATE_DIM_TBL.CALENDAR_YEAR_NAME
FROM
DATE_DIM_TBL
WHERE
( DATE_DIM_TBL.DAY >= UPPER(to_char(to_date('01-05-2005 00:00:00','dd/mm/yyyy HH24:MI:SS'),'dd-mon-yy')) )
AND
( DATE_DIM_TBL.DAY <= UPPER(to_char(to_date('04-05-2009 00:00:00','dd/mm/yyyy HH24:MI:SS'),'dd-mon-yy')) )
can somebody please give any pointers about what has gone wrong in WebI.
--KuldeepPlease find below
20-APR-05
02-JAN-00
03-JAN-00
04-JAN-07
05-JAN-00
06-JAN-08
07-JAN-00
08-JAN-09
09-JAN-11
Yes I tried SQL*PLus on BOBJ Server machine. SQL returns correct data.
Do you think is it some setting in WebI, As It hapopens only when I use condition object as a filter in Webi report. When I create Report filter it works fine.
--Kuldeep -
Strange behavior after using NIK plug-ins
Every once in a while I encounter this strange behavior of Aperture. I first process the NEF's in Aperture (white balance, Exposure, Enhance... and, when needed, Cropping) and then I fine tune the image with the NIK plug-ins; when needed DfIne 2.0, Viveza, Color Efex Pro 3.0 and Sharpener Pro 3.0 Output Sharpener.
If I look at the processed picture then, I get a perfect presentation of the photo;
!http://users.skynet.be/fc419085/Aperture-1.jpg!
But when I press Z to zoom into a 100% preview I get this;
!http://users.skynet.be/fc419085/Aperture-2.jpg!
When I select the Loup in the normal view mode I get this;
!http://users.skynet.be/fc419085/Aperture-3.jpg!
This doesn't happen with all my pictures, yesterday I processed a series of 8 pictures an 6 of them showed this behavior the other two acted normal and I can't see what I did differently whit these last two.
When I export the strangely behaving photo's to a Tiff or a Jpeg, I get perfectly normal pictures.
The original NEF behaves normal. I have seen this behavior with NEF's from a Nikon D200, D2x and a D300. I have Aperture 2.1.2 running on a 2.33 GHz Intel Core Duo MacBook Pro running Mac OS X 10.5.6
Does anybody know what's happening and if so, how to solve this problem?
Cheers,
IvanI did some testing and what I found is too weird to be true.
First this mashed up look doesn't only happen after using NIK plug-ins, it also happens when making a roundtrip to Photoshop, given that certain conditions are met.
Give it a try yourself. Crop an image to an uneven pixelcount dimension, for example 4227 x 2797 and make a roundtrip to Photoshop. Then have a 100% view look at the new image in Aperture. You'll have a mashed up view, at least I do.
Now crop the same original image to an even pixelcount dimension, for example 4228 x 2798 and make an roundtrip to Photoshop once more. When you have a 100% view of the new image now, you'll see a perfectly normal photo.
Do you think Aperture developers are reading this forum? -
Strange Behavior connecting to Oracle
Hi to All,
On Server Windows 2003 I have installed Oracle 10g R2. On this Server run Toad for Oracle.
If I run Oracle console, all work fine; running Toad the ORA-12154 error is displayed.
I have tried to connect to DB with Toad from a client and all works.
Have someone an idea on this strange behavior ?
Thank You and Best Regards
GaetanoThis may be a problem?NO!
12154, 00000, "TNS:could not resolve the connect identifier specified"
// *Cause: A connection to a database or other service was requested using
// a connect identifier, and the connect identifier specified could not
// be resolved into a connect descriptor using one of the naming methods
// configured. For example, if the type of connect identifier used was a
// net service name then the net service name could not be found in a
// naming method repository, or the repository could not be
// located or reached.
// *Action:
// - If you are using local naming (TNSNAMES.ORA file):
// - Make sure that "TNSNAMES" is listed as one of the values of the
// NAMES.DIRECTORY_PATH parameter in the Oracle Net profile
// (SQLNET.ORA)
// - Verify that a TNSNAMES.ORA file exists and is in the proper
// directory and is accessible.
// - Check that the net service name used as the connect identifier
// exists in the TNSNAMES.ORA file.
// - Make sure there are no syntax errors anywhere in the TNSNAMES.ORA
// file. Look for unmatched parentheses or stray characters. Errors
// in a TNSNAMES.ORA file may make it unusable.
// - If you are using directory naming:
// - Verify that "LDAP" is listed as one of the values of the
// NAMES.DIRETORY_PATH parameter in the Oracle Net profile
// (SQLNET.ORA).
// - Verify that the LDAP directory server is up and that it is
// accessible.
// - Verify that the net service name or database name used as the
// connect identifier is configured in the directory.
// - Verify that the default context being used is correct by
// specifying a fully qualified net service name or a full LDAP DN
// as the connect identifier
// - If you are using easy connect naming:
// - Verify that "EZCONNECT" is listed as one of the values of the
// NAMES.DIRETORY_PATH parameter in the Oracle Net profile
// (SQLNET.ORA).
// - Make sure the host, port and service name specified
// are correct.
// - Try enclosing the connect identifier in quote marks.
// See the Oracle Net Services Administrators Guide or the Oracle
// operating system specific guide for more information on naming.This error is clear.
SQL*Net is being asked to resolved TNS_ALIAS & it reports that it can not find the requested name.
EITHER
1) the requested name is not correct
or
2) SQL*Net is looking in the wrong tnsnames.ora file & still not finding the requested name.
Good Luck solving your mystery -
I recently purchased a MacPro, installed Leopard and moved all my files, applications, and settings from my MacBook Pro notebook by way of a Time Machine backup. Everything went without a hitch except for iMovie 08. When I open it it appears to start up but the application window never opens and almost all the menu items are grayed out. I can quit the application and start it again, but still get the same strange behavior. I have repaired permissions, verified my disk, deleted preferences and reinstalled iLife, then updated in software update, all with no effect. However iMovie 08 runs just fine on my MacBook Pro which should be identical to my Mac Pro. What gives? Ironic since a primary reason for purchasing this computer was for its enhance performance capabilities
1) load and install the update for iM08, vers 7.1.
2) then, in System Preferences/Monitor/Color Profile choose 'any other' than the actual one (e.g. AdobeRGB).. launch iM08.. now, set the Color Profile to your wanted one.. -
Hi Team,
I am using HTMLDB V2.0 and Firefox V1.5.0.1. I used wizard to create a report/form application. However, when I press a button to update the form all the buttons line up in a vertical row and I then have to press the same button again.
My application is 30412 at htmldb.oracle.com. The problem is occurring at page 4. Go to page 3 (2nd tab) and select any record. You will be directed to page 4. Then when you press any button (cancel, create, delete, apply changes) on page 4, page 4 is refreshed and the buttons strangely line up in a vertical column. I then have to press the same button again before the update occurs.
I have the same report/form setup on pages 1 and 2 and it is working fine on those pages.
This strange behavior is not occurring in IE. I also notice that the font size is bigger in IE .
I would appreciate any help you might offer.
I really enjoy working with HTMLDB.
Thanks, AndySorry about that. I removed all the authorization schemes from the application. I also changed the authentication scheme to HTMLDB. Let me know if I need to do something more for you to get access.
Thanks for looking at it.
I think it may have something to do with the "button, alternative 3" template from theme 3 that I am using. When I switch to the "button" template from theme 3 then the strange behavior goes away in Firefox.
Andy -
Strange Behavior of program while using BAPI_PO_CREATE1
Hello SAP GURUs,
I've created an Upload Program using BAPI_PO_CREATE1 for Mass Service PO Creation.
When I execute the program and Specify the File for uploading, It Gives me errors as
E BAPI 1 No instance of object type PurchaseOrder has been created. External reference:
E MEPO 0 Purchase order still contains faulty items
E 6 436 In case of account assignment, please enter acc. assignment data for item
But when I come back to Selection Screen of the Program and specify the SAME FILE AGAIN and Execute,
The Program runs successfully and generates the PO number.
I have never seen such strange behavior in any BAPIs before.
Pls help..PERFORM refresh_tables.
PERFORM fill_tables.
END-OF-SELECTION.
Display the Summary as an ALV Grid Display
IF NOT ig_mymssg[] IS INITIAL.
PERFORM display_basic_list . "Grid Display
ELSE.
MESSAGE s000 WITH 'No data exists'(051).
STOP.
ENDIF.
*& Form refresh_tables
text
--> p1 text
<-- p2 text
FORM refresh_tables .
REFRESH: ig_fieldcat,
ig_mymssg,
poitem,
poitemx,
poaccount,
poaccountx,
poservices,
ig_return.
wt_itab, record, record2 .
ENDFORM. " refresh_tables
*& Form fill_tables
text
--> p1 text
<-- p2 text
FORM fill_tables .
record2[] = record[].
record3[] = record[].
DELETE ADJACENT DUPLICATES FROM record COMPARING id_no.
DELETE ADJACENT DUPLICATES FROM record2 COMPARING id_no po_item.
SELECT MAX( packno ) FROM esll INTO wrk_packno.
LOOP AT record.
CLEAR : poheader, poheaderx, wa_poitem, wa_poitemx, wa_poservices, wa_poaccount, wa_poaccountx, wa_poschedulex, wa_poschedule.
REFRESH: poitem, poitemx, poaccount, poaccountx, poservices, ig_return, posrvaccessvalues, poschedule, poschedulex.
PERFORM po_header.
LOOP AT record2 WHERE id_no = record-id_no.
wrk_packno = wrk_packno + 1.
PERFORM po_item.
PERFORM po_scheudle.
PERFORM acc_assignment.
PERFORM po_services.
ENDLOOP.
PERFORM create_po.
ENDLOOP.
ENDFORM. " fill_tables
*& Form display_basic_list
text
--> p1 text
<-- p2 text
FORM display_basic_list .
g_repid = sy-repid.
PERFORM f2000_fieldcat_init .
PERFORM display_alv_grid_1.
ENDFORM. " display_basic_list
*& Form f2000_fieldcat_init
text
--> p1 text
<-- p2 text
FORM f2000_fieldcat_init .
REFRESH ig_fieldcat.
PERFORM fill_fields_of_fieldcatalog USING 'IG_MYMSSG'
'STATUS'
c_x
'Status'
'10'.
PERFORM fill_fields_of_fieldcatalog USING 'IG_MYMSSG'
'RECORD'
c_x
'Record'
'20'.
PERFORM fill_fields_of_fieldcatalog USING 'IG_MYMSSG'
'ERRMSG'
'Message'
'100'.
ENDFORM. " f2000_fieldcat_init
*& Form display_alv_grid_1
text
--> p1 text
<-- p2 text
FORM display_alv_grid_1 .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = g_repid
i_structure_name = 'IG_MYMSSG'
i_grid_title = 'LOG'
is_layout = wg_layout
it_fieldcat = ig_fieldcat[]
i_save = c_save
TABLES
t_outtab = ig_mymssg
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " display_alv_grid_1
*& Form fill_fields_of_fieldcatalog
text
-->P_0626 text
-->P_0627 text
-->P_C_X text
-->P_0629 text
-->P_0630 text
FORM fill_fields_of_fieldcatalog USING p_tabname TYPE slis_tabname
p_field TYPE slis_fieldname
p_key TYPE c
p_name
len.
To fill in the fields of the table fieldcatalog depending on the field
CLEAR wg_fieldcat.
wg_fieldcat-fieldname = p_field. " The field name and the table
wg_fieldcat-tabname = p_tabname.. " name are the two minimum req
wg_fieldcat-key = p_key. " Specifies the column as a key
wg_fieldcat-seltext_l = p_name. " Column Header
wg_fieldcat-outputlen = len.
APPEND wg_fieldcat TO ig_fieldcat.
ENDFORM. " fill_fields_of_fieldcatalog
*& Form create_po
text
--> p1 text
<-- p2 text
FORM create_po .
CLEAR : wg_return.
REFRESH : ig_return.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = poheader
poheaderx = poheaderx
IMPORTING
exppurchaseorder = po_no
TABLES
return = ig_return
poitem = poitem
poitemx = poitemx
poschedule = poschedule
poschedulex = poschedulex
poaccount = poaccount
poaccountx = poaccountx
poservices = poservices
posrvaccessvalues = posrvaccessvalues.
SORT ig_return BY type.
READ TABLE ig_return INTO wg_return WITH KEY type = 'S'.
IF sy-subrc EQ 0.
CLEAR : wg_return.
REFRESH : ig_return.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
CLEAR wg_errmsg.
WRITE icon_green_light AS ICON TO wg_errmsg-status.
CONCATENATE record-id_no po_no INTO wg_errmsg-record SEPARATED BY '/'.
wg_errmsg-record = po_no.
wg_errmsg-errmsg = 'PO created'.
APPEND wg_errmsg TO ig_mymssg.
ELSE.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
READ TABLE ig_return INTO wg_return WITH KEY type = 'E' TRANSPORTING message.
CLEAR wg_errmsg.
WRITE icon_red_light AS ICON TO wg_errmsg-status.
wg_errmsg-record = record-id_no.
wg_errmsg-errmsg = wg_return-message.
APPEND wg_errmsg TO ig_mymssg.
ENDIF.
ENDFORM. " create_po
*& Form po_header
text
--> p1 text
<-- p2 text
FORM po_header .
poheader-comp_code = record-comp_code.
poheader-doc_type = record-doc_type.
poheader-vendor = record-vendor.
poheader-purch_org = 'SERV'.
poheader-pur_group = record-pur_group.
poheader-currency = 'INR'.
poheaderx-comp_code = 'X'.
poheaderx-doc_type = 'X'.
poheaderx-vendor = 'X'.
poheaderx-purch_org = 'X'.
poheaderx-pur_group = 'X'.
poheaderx-currency = 'X'.
ENDFORM. " po_header
*& Form po_item
text
--> p1 text
<-- p2 text
FORM po_item .
DATA : days TYPE num2.
DATA : final_dt TYPE datum.
DATA : is_ok TYPE boole_d.
DATA : msg_hndlr TYPE REF TO if_hrpa_message_handler.
days = 20.
CALL FUNCTION 'HR_ECM_ADD_PERIOD_TO_DATE'
EXPORTING
orig_date = sy-datum
num_days = days
signum = '+'
message_handler = msg_hndlr
IMPORTING
result_date = final_dt
is_ok = is_ok.
CLEAR: wa_poitem,wa_poitemx.
wa_poitem-po_item = record2-po_item.
wa_poitem-short_text = record2-short_text.
wa_poitem-plant = record2-plant.
wa_poitem-matl_group = 'S001'.
wa_poitem-tax_code = 'LA'.
wa_poitem-item_cat = item_cat.
wa_poitem-pckg_no = wrk_packno.
wa_poitem-acctasscat = acctasscat.
wa_poitem-gr_to_date = final_dt.
APPEND wa_poitem TO poitem.
wa_poitemx-po_item = record2-po_item.
wa_poitemx-po_itemx = 'X'.
wa_poitemx-short_text = 'X'.
wa_poitemx-plant = 'X'.
wa_poitemx-tax_code = 'X'.
wa_poitemx-item_cat = 'X'.
wa_poitemx-acctasscat = 'X'.
wa_poitemx-pckg_no = 'X'.
wa_poitemx-matl_group = 'X'.
wa_poitem-gr_to_date = 'X'.
APPEND wa_poitemx TO poitemx.
ENDFORM. " po_item
*& Form PO_SERVICES
text
--> p1 text
<-- p2 text
FORM po_services .
CLEAR: wa_poservices, wa_posrvaccessvalues.
wa_poservices-pckg_no = wrk_packno.
wa_poservices-line_no = '0000000001'.
wa_poservices-outl_ind = 'X'.
wa_poservices-subpckg_no = wa_poservices-pckg_no + 1.
wa_poservices-from_line = '000001'.
APPEND wa_poservices TO poservices.
CLEAR wa_poservices.
wrk_packno = wrk_packno + 1.
wa_poservices-pckg_no = wrk_packno.
wa_poservices-line_no = '0000000002'.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = record2-service
IMPORTING
output = record2-service.
wa_poservices-ext_line = '0000000010'.
wa_poservices-service = record2-service.
wa_poservices-quantity = record2-quantity.
wa_poservices-gr_price = record2-gr_price.
wa_posrvaccessvalues-pckg_no = wrk_packno.
wa_posrvaccessvalues-line_no = '0000000002'.
wa_posrvaccessvalues-serial_no = '01'.
wa_posrvaccessvalues-serno_line = '01'.
wa_posrvaccessvalues-quantity = record2-quantity.
wa_posrvaccessvalues-net_value = record2-gr_price.
APPEND wa_poservices TO poservices.
APPEND wa_posrvaccessvalues TO posrvaccessvalues.
ENDFORM. " PO_SERVICES
*& Form ACC_ASSIGNMENT
text
--> p1 text
<-- p2 text
FORM acc_assignment .
DATA : tmp_gl LIKE bapimepoaccount-gl_account.
tmp_gl = '400265'.
CLEAR : wa_poaccount, wa_poaccountx.
wa_poaccount-po_item = record2-po_item.
wa_poaccount-serial_no = '01'.
wa_poaccount-co_area = '1000'.
wa_poaccount-quantity = record2-quantity.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = tmp_gl
IMPORTING
output = wa_poaccount-gl_account.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = record2-orderid
IMPORTING
output = wa_poaccount-orderid.
APPEND wa_poaccount TO poaccount.
wa_poaccountx-po_item = record2-po_item.
wa_poaccountx-serial_no = '01'.
wa_poaccountx-co_area = 'X'.
wa_poaccountx-quantity = 'X'.
wa_poaccountx-gl_account = 'X'.
wa_poaccountx-orderid = 'X'.
APPEND wa_poaccountx TO poaccountx.
ENDFORM. " ACC_ASSIGNMENT
*& Form PO_SCHEUDLE
text
--> p1 text
<-- p2 text
FORM po_scheudle .
CLEAR : wa_poschedule, wa_poschedulex.
wa_poschedule-po_item = record2-po_item.
wa_poschedule-sched_line = '0001'.
wa_poschedule-del_datcat_ext = 'D'.
wa_poschedule-delivery_date = sy-datum.
wa_poschedule-quantity = record2-quantity.
APPEND wa_poschedule TO poschedule.
wa_poschedulex-po_item = record2-po_item.
wa_poschedulex-sched_line = '0001'.
wa_poschedulex-po_itemx = 'X'.
wa_poschedulex-sched_linex = 'X'.
wa_poschedulex-del_datcat_ext = 'X'
wa_poschedulex-delivery_date = 'X'.
wa_poschedulex-quantity = 'X'.
APPEND wa_poschedulex TO poschedulex.
ENDFORM. " PO_SCHEUDLE -
Strange behavior of email notification: where is the log?
Hi,
The email notifications have a strange behavior in our productive system. When the system process whatever subscription only the firsts four notification are sent by email even thought all the inbox notifications are sent. I checked the mail server and only four smtp connections are sent..... In the development system it is working well, I mean all the emails are sent using the same mail server.... I marked the option Enable session debug info in the EMAIL channel but I see nothing in the los (default.trc).
Is there any log to check what it is happened? Where is the log of session debug info?
Thanks
AntonioThanks for you fast replay.
I would like to increase the logging of Notificator (com.sapportals.wcm.service.notificator.wcm) to DEBUG but in NW7 SP13 I do not find that logging locations.
Could you give any hit on it?
thanks
Antonio
By the way... I found the following warning:
JMX connector exception occurred while processing external JMX request [ JMX request (java) v1.0 len: 314 | src: cluster target-node: 8573000 req: invoke params-number: 4 params-bytes: 0 | :name=com.sap.portal.prt.bridge.service.mbeans.PRTMBeanRuntime,j2eeType=PRTBridge_JMX_SECTION,SAP_J2EEClusterNode=8573000,SAP_J2EECluster=""... [see details] -
Strange behavior of Windows Azure Compute Emulator (SDK 2.3)
Today, after an update of the Azure SDK from 2.2 to 2.3, I noticed that only one of the two instances of my web role is started in
the Azure Compute Emulator, the output of the Start-AzureEmulator is this:
VERBOSE: Starting Emulator...
VERBOSE: Role is running at http://127.0.0.1:81/
Role is running at tcp://127.0.0.1:3389/
Role is running at tcp://127.0.0.1:3389/
VERBOSE: Started
and only one instance is started in the Azure Compute Emulator.
But in the past was something similar to this one:
VERBOSE: Starting Emulator...
VERBOSE: Role is running at http://127.0.0.1:81/
http://127.0.0.1:82/
Role is running at tcp://127.0.0.1:3389/
Role is running at tcp://127.0.0.1:338/
VERBOSE: Started
and two instances were started.
I already found this thread:
http://stackoverflow.com/questions/13946634/strange-behavior-of-windows-azure-compute-emulator-sdk-1-8-with-multiple-role
but it was not useful in my case (Microsoft.WindowsAzure.Common.WorkArounds.BindToAllIpsWorkAroundEnabled is False).
Thanks in advance for any help.
OS: Windows 8.1
Azure SDK: 2.3
Azure Compute Emulator: 2.3.0.0Hi,
As far as I know, powershell didn't have a parameter to start azure emulator with full express, please try to use Command-line to test, refer to
http://msdn.microsoft.com/en-us/library/gg433130.aspx for more details, if this didn't give you help, please feel free to let me know.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Strange behavior of std::string find method in SS12
Hi
I faced with strange behavior of std::string.find method while compiling with Sunstudio12.
Compiler: CC: Sun C++ 5.9 SunOS_sparc Patch 124863-14 2009/06/23
Platform: SunOS xxxxx 5.10 Generic_141414-07 sun4u sparc SUNW,Sun-Fire-V250
Sometimes find method does not work, especially when content of string is larger than several Kb and it is needed to find pattern from some non-zero position in the string
For example, I have some demonstration program which tries to parse PDF file.
It loads PDF file completely to a string and then iterately searches all ocurrences of "obj" and "endobj".
If I compile it with GCC from Solaris - it works
If I compile it with Sunstudio12 and standard STL - does not work
If I compile it with Sunstudio12 and stlport - it works.
On win32 it always works fine (by VStudio or CodeBlocks)
Is there any limitation of standard string find method in Sunstudio12 STL ?
See below the code of tool.
Compilation: CC -o teststr teststr.cpp
You can use any PDF files larger than 2kb as input to reproduce the problem.
In this case std::string failes to find "endobj" from some position in the string,
while this pattern is located there for sure.
Example of output:
CC -o teststr teststr.cpp
teststr in.pdf Processing in.pdf
Found object:1
Broken PDF, endobj is not found from position1155
#include <string>
#include <iostream>
#include <fstream>
using namespace std;
bool parsePDF (string &content, size_t &position)
position = content.find("obj",position);
if( position == string::npos ) {
cout<<"End of file"<<endl;
return false;
position += strlen("obj");
size_t cur_pos = position;
position = content.find("endobj",cur_pos);
if( position == string::npos ){
cerr<<"Broken PDF, endobj is not found from position"<<cur_pos<<endl;;
return false;
position += strlen("endobj");
return true;
int main(int argc, char ** argv)
if( argc < 2 ){
cout<<"Usage:"<<argv[0]<<" [pdf files]\n";
return -3;
else {
for(int i = 1;i<argc;i++) {
ifstream pdfFile;
pdfFile.open(argv,ios::binary);
if( pdfFile.fail()){
cerr<<"Error opening file:"<<argv[i]<<endl;
continue;
pdfFile.seekg(0,ios::end);
int length = pdfFile.tellg();
pdfFile.seekg(0,ios::beg);
char *buffer = new char [length];
if( !buffer ){
cerr<<"Cannot allocate\n";
continue;
pdfFile.read(buffer,length);
pdfFile.close();
string content;
content.insert(0,buffer,length);
delete buffer;
// the lets parse the file and find all endobj in the buffer
cout<<"Processing "<<argv[i]<<endl;
size_t start = 0;
int count = 0;
while( parsePDF(content,start) ){
cout<<"Found object:"<<++count<<"\n";
return 0;Well, there is definitely some sort of problem here, maybe in string::find, but possibly elsewhere in the library.
Please file a bug report at [http://bugs.sun.com] and we'll have a look at it. -
[BO XI 3.0] - Strange behavior regarding language settings
Hello,
I found strange behavior BOE in infoview portal. We have Desktop intelligence documents published in repository and when we open report (first time) in infoview we have right format for date and numbers e.g. dd.mm.yyyy, 123.123,00.
When we close this report and open once again the format is en-US e.g. mm/dd/yyyy 123,123.00 and this is wrong. We log out and log in and open this report but no change.
If we restart services in cmc (deski services) then the first time is report ok and when we open again this report the same error.
SW:
Windows server 2003 sp2 - english (regional settings - slovenian)
BOE premium ( BO XI R 3.0 => the same problem in BO XI 3.1)
CMS database => Oracle 10gR2 (nsl lang SLOVENIAN_SLOVENIA.EE8MSWIN1250)
Language settings in infoview we check => use browser locale and slovenian
Thank you for reply!
In BOE R2 works fine...
Regards,
GregorHi Gregor,
Try the following option.
Find the file i8ln.xml in the location
"<install directory of BO>\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\scripts\"
Take a backup of the file and make the follwing changes.
Find the following code in the file
activate_languages>
<state value="0"/>
<State value="0" cs_lang="Bulgarian"/>
<State value="0" orig_lang="" cible_lang="Bulgarian"/>*
<State value="0"/>
</activate_languages>
Replace it with:
<activate_languages>
<state value="0"/>
<State value="1" cs_lang="English (Australian)"/>
<State value="1" orig_lang="" cible_lang="English (Australian)"/>*
<State value="1"/>
</activate_languages>
Save the file.
Restart your Desktop Intelligence servers. It might take a bit of time to pick up the changes.
Note: If you start Deski after this change, and go to "Tools > Options", you will see a disabled language button with "English(....)" written on it.
Regards,
Anisa
Maybe you are looking for
-
Keeping my iTunes Libraries in Sync
My wife and I share a single iTunes library from separate accounts on an iMac (actually I have two accounts - one for me and one for work, for a total of 3). The song files are on an external HD, the iTunes Library and iTunes Music Library.xml files
-
Thunderbird won't print, even though Firefox will. Print preview works fine. Job queued, but seems to think printer is offline? Port is not listed when look at print job. (USB connection) Wasn't getting an error message... job just never printed or l
-
Question about the java doc of String.intern() method
hi all, my native language is not english, and i have a problem when reading the java doc of String.intern() method. the following text is extract from the documentation: When the intern method is invoked, if the pool already contains a string equal
-
Cover flow in bookmarks no picture for imported bookmarks
none of the bookmarks I imported have the website picture presented in the "cover flow" view. Is there a way to refresh or update this WITHOUT having to open each bookmark? thanks. P.S. Safari is pretty cool thus far.
-
ClassCastException Document Security Server
Hi, I've got problems invoking the PDF manipulation module. Environment: - Linux 9.0 - j2sdk1.4.2_13 - jboss-3.2.5 - Oracle 10i the code: public void createPDF()throws Exception{ UserTransaction transaction = null; try{ ConnectionFactory dmConnection