Report GRPO's Not issued to production
Hi,
Is it possible to extract report for GRPO which are not issued to Production and their status.
Ex. I created a GRPO the status of GRPO gets closed only when we do AP invoice or Goods return.
In a report I want the status of GRPO and whether it has been issued to production or not.
Is it possible?
Regards
Shashi
Hi Shashi,
The report you want will be hard to get. Because, there is no logic to link GRPO with issue to production. You are correct on status of GRPO gets closed only when we do AP invoice or Goods return . That is the B1 function.
Thanks,
Gordon
Similar Messages
-
Report to check open reservations for production orders where GI not posted
Hi experts,
Can we get reservation details from any report/ table for production order where material has not been issued, report should also display the value of the reserved material.
I could not find desired details in RESB (it has price but not value) and MB25.
Thanks in advance, useful ansers will be rewarded.
Thnx
AnandHello Anand,
there is no report but you may use the production order info system with list "components" and create a layout contaning the issued quantity and/or the final issue indicator. With a correct sorting, the list should show all orders with non-issued components at the top.
Regards, Andreas -
Production Reporting out put not getting deleted after 30mins what we set.
Hi,
This issue regarding Production Reporting. In the workspace the report output not getting deleted after 30minutes (while publishing the report settings were like delete after 30 mins). Any suggestions please .....
Thanks
VenkatHi Deepak,
Please chek the field / value which u have changed is relavant to printouts of the change.
You can check with following path
SPRO> MM > Purchasing > Message > Fields Relevant to Printouts of Changes.
Confirm tick is provided for PO ( P)
Vivek -
Issue for Production Report With Production Order Details and Batch Number
Hi Guys,
I am looking for a batch report.I have tried it but i didnt get the desired results.Pls any body give me some solution.
I need to include the Batch number in this report and when i have done the same the values are repeating and also need to display the Item Description for (Description in Production Order - Parent Item)
SELECT distinct t0.docnum,T0.[DocDate], t4.IssuedQty as 'Consumed Qty', T1.[ItemCode] as 'Circle Codee',T1.[Dscription] as 'Circle Name',t3.itemcode
FROM [dbo].[OIGE] T0
INNER JOIN [dbo].[IGE1] T1 ON T0.DocEntry = T1.DocEntry
LEFT JOIN owor t3 on t1.baseref = t3.docnum
left join wor1 t4 on t3.docentry=t4.docentry
INNER JOIN OITM T5 ON T1.ItemCode = T5.ItemCode
INNER JOIN OITB T6 ON T5.ItmsGrpCod = T6.ItmsGrpCod
INNER JOIN IBT1 T7 ON T5.ItemCode = T7.ItemCode
INNER JOIN OIBT T8 ON T7.BatchNum = T8.Batchnum and T7.ItemCode = T8.itemcode
where t0.docdate between [%0] and [%1] and T6.[ItmsGrpNam] = 'Raw Materials' and t0.JrnlMemo = 'Issue for Production'
Any body provide me some idea for achieving this....
Regards,
Vamsi.Hi Bala.
Thanks for the query but still not acheived the result.
The Scenario is to know the quantity of the Coil (Raw MAterial) used IN making a product in different stages and from which batch and Whse the RawMaterial is Consumed in making of the Product(Production Order Parent Item)
------------- (Issue for Production )-----------------------| Production Order Qty(IssuedQty) Production Order | BatchNum
DocNo/Date | ( RawMaterial/Coil Code/Desription) | (Quantity issued for RM) ItemCode/Description | Batchnum
Regards,
Vamsi..
Edited by: VamsamP on Dec 1, 2010 5:06 PM -
Error while adding the issue for production (item cost not found)
Hi all,
The scenario is,
when the user is trying to add the issue for production system is showing error item cost not
found.The item which is issued is Inventory + purchase item with manual issue method.The valuation
method for that item is FIFO.since the valuation method is FIFO,error related to item cost should
not occur.
Since the valuation method is FIFO.Item cost error should not occur.
The error related to item cost must not occur at the time of issue for production.
Regards-
Mona.Hi!
Please check these threads
Sales Delivery Document
Item Cost Error
No item cost was found -
Reporting Services offers limited support for using AlwaysOn Availability Groups with report server databases. The report server databases can be configured in AG to be part of a replica; however Reporting Services will not automatically use a different
replica for the report server databases when a failover occurs. How to overcome this issue? is there any workaround for that..
RahulHi.
With the AlwaysOn listener you should have a single DNS name to connect to regardless of which cluster node is active. Are you using the listener service? If not, please refer to the link below.
http://msdn.microsoft.com/en-us/library/hh213417.aspx#AGlisteners -
The genius bar sold me a LaCie 500 GB EHD today but I can't get it to work properly. Can I schedule another genius bar appt. to help me with this issue even though the EHD is not an Apple product?
Yes, if you purchased it in an Apple store, they should be able to assist you. Bring your MBP with you as well as the Drive.
Ciao. -
Issue in Production for Workflow not getting Triggered .
Hi Guys,
I have a workflow, which is properly triggering in the development and Quality but not getting triggered in the Production. Can't get the Exaact reason because by using T-code PFTC when i test the workflow independantly its working properly and even BOR does not have any problem. Please Help me guys as this is a issue in Production.
The workflow is a customized one, It getting triggered throught the funtion call in User Exit of MM01.
ThanksIt getting triggered throught the funtion call in User Exit of MM01.
1. I hope the workflow customization is done properly in production system, as you stated that if you are trying to trigger from PFTC then it is working fine, can you please try to Refresh Organizational Environment from SBWP ---> On MEnu ---> Settings --> Workflow Settings ---> Refresh Organizational Environment and secondly try to refresh the buffer from txn SWU_OBUF
2. Make sure the user exit is transported to Production.
3. Check the workflow log from the txn SWIA if you have proper authorizations for the userid. -
Production Order should not be confirmed if material is not issued
Dear All,
Our Client has a requirement,
While confirmation of order,system should check the material issue to production order,if material not issued confirmation should not allow.
Please give your valuable input to fulfill this requirement.
Thanks in advance,
Vijay MankarHi,
You can use this exit with reference to MB1A and MB31.
Please refer the Documentation for the Enhancement: MBCF0002
=======================================================
The user exit MBCF0002 includes a function module that is called up whe
you enter a goods movement for each item.
It enables you to fill in the item text in the material document item,
depending on the following data:
o MKPF (Material document header)
o MSEG (Material document item)
o VM07M (Additional data for material document item)
o DM07M (Additional data for material document item)
The item text is also stored in the accounting document.
Examples
Goods receipt for a purchase order assigned to an account: since the
purchase order number does not contain a material number, the material
Example of source text:
IF I_MSEG-MATNR IS INITIAL.
E_SGTXT = I_DM07M-MAKTX.
ENDIF.
If the material description is to be used as the item text for all goods
movements, the source text has the following line only:
E_SGTXT = I_DM07M-MAKTX.
==============================================================
You can refer the earlier post for some sample coding.
You need to build your own logic for this..
Hope this helps..
Regards,
Siva -
Goods Issue/Issue to Production with Batch in status Locked/Not Accessible
I want to block users to add GI/Issue to Production with batch in status Locked/Not Accessible
Is it possible to create an approval? A problem here that we have different forms for batch and Goods Issue. Maybe something else can help me?
As I see that is I can create only alert, but I would like to prevent creating a document
Thanks,
OlgaThe B1 built-in approval only works with marketing documents. This includes Goods Issue for 2007 version. For Issue to Production, you have to use SP Transaction Notification to block.
Thanks,
Gordon -
Validation for issue for production not working
hi all,
i have designed database validation for issue for production .
by default SAP gives error if instock is less than the quantity to be issued.
My Clients requierment is whlie issuing item for production, row level item quantity should not be greater than the instock of a warehouse selected for that item in row level.
while in case of sap default validation it considers all the instock of item from all the warehouse and i want to consider only those stock of warehouse whih is selected for the item at row level.
my validation is as follows but it gives error for all cases.
IF @transaction_type in ('A','U') AND @object_type = '60'
BEGIN
declare @line as numeric(4)
declare @dline as numeric(4)
declare @ritem as nvarchar(50)
declare @bref as nvarchar(50)
select @bref= T1.[BaseRef] from OIge T0 left outer JOIN
Ige1 T1 ON T0.DocEntry = T1.DocEntry
left outer join oitm t2 on t2.itemcode=t1.itemcode
left outer join OITW T3 on t3.whscode=t1.whscode and t3.itemcode = t1.itemcode
where T1.docentry=@list_of_cols_val_tab_del
set @dline=0
select @line= isnull(max(t1.linenum),0)
from OIge T0 left outer JOIN
Ige1 T1 ON T0.DocEntry = T1.DocEntry
left outer join oitm t2 on t2.itemcode=t1.itemcode
left outer join OITW T3 on t3.whscode=t1.whscode and t3.itemcode = t1.itemcode
where t1.docentry= @list_of_cols_val_tab_del
while @dline<=@line
begin
select @ritem= t1.itemcode from OIge T0 left outer JOIN Ige1 T1 ON
T0.DocEntry = T1.DocEntry
left outer join oitm t2 on t2.itemcode=t1.itemcode
left outer join OITW T3 on t3.whscode=t1.whscode and t3.itemcode = t1.itemcode
where T0.DocEntry = @list_of_cols_val_tab_del and
t1.linenum=@dline
if exists (SELECT T0.DocEntry
from OIge T0 left outer JOIN Ige1 T1 ON T0.DocEntry = T1.DocEntry
left outer join oitm t2 on t2.itemcode=t1.itemcode
left outer join OITW T3 on t3.whscode=t1.whscode and t3.itemcode = t1.itemcode
where T0.DocEntry = @list_of_cols_val_tab_del and
t1.linenum=@dline and t1.itemcode in (@ritem) and t3.onhand < t1.quantity )
BEGIN
SELECT @Error = 1, @error_message = 'less quantity'
END
set @dline=isnull(@dline,0)+1
set @ritem=' '
end
END
pls suggest solution...Iu2019m sorry. The error was that the tables contain the data after the transaction. So try this:
IF @object_type = '60' and @transaction_type= 'A'
and (Select top 1 j.BaseType from IGE1 j
Where j.DocEntry = @list_of_cols_val_tab_del)=202
BEGIN
if exists
(Select i.DocEntry from IGE1 i
Where i.DocEntry = @list_of_cols_val_tab_del
and (select w.OnHand from OITW w
where w.ItemCode=i.ItemCode and w.WhsCode=i.WhsCode)<0 )
Begin
set @error =1
set @error_message = 'Less quantity in the warehouse !'
End
END -
Goods issue document is not displaying in production order
Hi Gurus, I am having problem That when I am doing goods issue in MB1A t code the document is posting but it is not displaying in production order.but when I am doing same goods issue in MIGO the document is displaying in Production order.when I am doing same goods issue in another plant with MB1A the document is showing.so where is the problem??is there any setting with plant and T code combination??what exactly is the error??why it is not showing in particular t code in particular plant.Please guide me.
Thanks in Advance.Hi,
Check in transaction OPL8 for the combination of plant and order type..is the below indicator are activated or not...
Thanks
Kumar -
Hi Experts,
I got an issue in production that it should trigger mails daily once. But this program is triggering for every hour,where to look it pls how to debug this issue?can this FM can check?
call function 'DURATION_DETERMINE'
importing
duration = lv_duration
changing
start_date = ls_history-datum
start_time = ls_history-uzeit
end_date = p_datum
end_time = p_uzeit
exceptions
factory_calendar_not_found = 1
date_out_of_calendar_range = 2
date_not_valid = 3
unit_conversion_error = 4
si_unit_missing = 5
parameters_not_valid = 6
others = 7.
if sy-subrc <> 0.
ThanksHi ,
Youi can check this tables
MKPF material document
MSEG material document (item level)
RESB Material reservations
RKPF header
Rergards
SANIL -
Report Viewer Webpart IE9 issue -Reports not visible
Hi,
we have several installations using Sharepoint 2010 together with Reporting Services 2008 and 2008R2.
When displaying reports in Sharepoint through the report viewer webpart, the rendering in IE9 will sometimes not display the report. This means
the Sharepoint site including the report viewer headline is visible, but the report itself is not rendered. After pressing ctrl+F5 the report most of the time will show up. When viewing the logs of reporting services it is clear that the report has been executed,
but as stated it was not visible in IE9.
Even when forcing IE9 to render all Websites in compatibility mode there is no change. Out of 10 times the report is roughly 3 times not visible.
On systems still using IE8 there are no problems at all.
Any ideas?
Regards,
AndreHi,
I just want to know whether this problem occurs on all the computers which installed Internet Explorer 9? As a test, please try to reset IE then check the result again:
1.
Run Internet Explorer, use Alt + T to open Tools menu, choose Internet Options.
2.
Choose Advanced tag, click “Reset…” button, click OK in the pop-up box.
3.
Click OK to close Internet Options, then restart Internet Explorer.
In you have any progress, please let me know.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ” -
Report Builder - Last page issue and Report Footer issue
I am using ColdFusion 9 Report Builder, am new to this product and encountering 2 issues.
Issue 1 - I have a field that I would like to print on the last page of my report. How can I determine the last page? I initially tried using a calculated field set to the 'highest' calc.Page_Number. Then I could compare the current page to the last page in the 'Print When' property. But calc.Page_Number can not be used in a definition of a calculated field.
Issue 2 - Depending on the amount of report detail, sometimes my report footer prints alone, without a page header and page footer. The report includes this page in the total number of pages. For example, if it is a 2 page report, the page header on page 1 will display Page 1 of 2. Then the only data on Page 2 is the Report Footer. No page header or page footer prints.
Any assistance on these issues would be most appreciated. To date, using the Report Builder has not been easy.To issue 1: The report contains a report band called report footer. thsi is always at the last page. The report footer band initially is collapsed, so you have to expand it by dragging the last band divider.
To issue 2: I guess this is a page break calculating error when detail data reaches really near the page footer area.
Try some experiments with different setting of the following properties/issues:
- in elements, e.g. calculating fields in the bands between report detail and page footer: In Properties / Print Control / Printing Options: Activate the option "Remove line when blank". This will remove the whole report band area if this field is blank. May save some empty space.
- try to remove unused empty space between detail rows.
- try to resize and reposition all detail fields so that they snap to the grid.
Best regards
Maybe you are looking for
-
Screen fields not getting displayed after Line 16
Hi All, There is a screen exit created in IW51, now the new requirment is to add 3 more fields. I added the fields below the exiting fields, in line number 15 , 16 &17. After executing the Tcode I could find that the field created in line 17 is not
-
How can I free some storage in my ipad?
Hi, I would like to free some space in my iPad. I have deleted some Apps that I was not using. What else can I do? Thanks
-
Creating new database schema in jdev
can I create new database schema in jdev.If yes how? I have checked many links but they are telling how to create connection to an existing database but not to create new databse? Please help..
-
Workflow triggered.. But no instance created for BO.. !
Hi.. I am triggering a workflow.. its been successful but the BO instance not been created.. The workflow object is not-set.. ! Any idea how to solve this.. ? Cheers
-
Phase One files shot with C1 4 will not open with ACR
Hi, files shot with Capture One 4 will not open with ACR nor DNG. Extension is set to .TIF but only the small preview opens. If I shoot with Capture One 3.7 - no problem. Any ideas ? Thanks, Gunter