Report hanging (when try to modify the report)

Post Author: aneel
CA Forum: WebIntelligence Reporting
Hi All,
This becomes a longlosting issue for me Please anyone look into this.
I have created one report with 6 global and 3 local filters, 12 local variables.
When I try to modify the webi report it strucks up and keeps on running continuously with out giving any kind of result.
Please reply anyone !!!!!!!!!

Post Author: jsanzone
CA Forum: WebIntelligence Reporting
Vinl,
The WebI (and BOE XI server) is not completely tuned out of the box to support multiple data providers and large data sets. There are tuning parameters that must be set (and which will cause more memory usage, etc, etc) and must be monitored to expand performance in order to resolve unwanted timeouts. If you are not the administrator, then you'll have to work with him or her (and possibly open a trouble ticket with tech support for more help, if needed).
The timeout aspect is frustrating. We have three servers, development, testing, and production. The development system is totally off-line and not under any security-lockdown influences. Testing is our pre-stage and was built by our BI team. And production is in the server farm built by the Sysadmins. Of the three servers, only the production server suffers from a two-minute WebI timeout (and Infoview timeouts where the report just spins all day without a response, but in WebI at least we get an ugly "error notice" when the two-minute timeout occurs). We think that some kind of lockdown was performed on our production server that causes the two-minute timeout for an executing report to occur. On the one hand it keeps us sharp in not building reports that will make the user wait a long time, and to encourage them to schedule a report through scheduler when it will take longer than two minutes to execute. On the other hand it can be troublesome to maintain a report that takes so long to run in terms of modifications and corrections. At times I've had to go into the datawarehouse and rename a production table to something else, then create a mini-version of that production table in order to run the report and modify it (all done in the off-hours of course), and then when done modifying the report, delete the mini-version of the production table and rename the off-named production table back to its original name in order to press on. The things we gotta do to press on with life.... Good luck, and hang in there Vinl.

Similar Messages

Issue with case when try to modify the siimple query

Hello PL/SQL Gurus/Experts,
I am stuck with an issue (could be simple) but not gettings any headsway -
select 365/day_num_yr Anul_Fact from Date where date_dt = trunc(sysdate -1) value returns is as - 1.46
need to write this in the form of case (as i need to multiply this to some other outer query), i want to store it ina variable and and then use the same in outer one -
but when use the following then it is always returning the value as 0 and not the same output as returned by the above query without case.
select (case when date_dt =trunc(sysdate -1) then 365/day_num_yr else 0 END) Anul_Fact Kindly help, i appericate your time and effort in advance.

Thanks for providing the Drop table and CTAS script. It eased the job of creating sample data;
I only used few data from the table:
drop table T4;
create table T4(day_num_yr, date_dt) as
select 249, to_date('09/05/2012', 'MM/DD/YYYY') from dual union all
select 250, to_date('09/06/2012', 'MM/DD/YYYY') from dual union all
select 251, to_date('09/07/2012', 'MM/DD/YYYY') from dual union all
select 252, to_date('09/08/2012', 'MM/DD/YYYY') from dual;
select date_dt, sysdate - 1 prev_dt, trunc(sysdate - 1) trunc_prev_dt,
       case when date_dt = trunc(sysdate - 1) then 365 / day_num_yr
            else 0
       end num_day
from t4;
DATE_DT                   PREV_DT                   TRUNC_PREV_DT             NUM_DAY
05-SEP-12                 06-SEP-12                 06-SEP-12                 0
06-SEP-12                 06-SEP-12                 06-SEP-12                 1.46
07-SEP-12                 06-SEP-12                 06-SEP-12                 0
08-SEP-12                 06-SEP-12                 06-SEP-12                 0See the output. For Date_DT as 6-Sep, i.e. a Day before Today, we are getting the Output, but for other dates we are not.
One another suggestion I would like to make is, (assuming) you are using the Table only for storing the Current day of Year and not including Public Holidays etc. then you can use a 'DDD' format model to get the Current Day of year starting 1 Jan.
Something like below:
select date_dt, sysdate - 1 prev_dt, trunc(sysdate - 1) trunc_prev_dt,
       case when date_dt = trunc(sysdate - 1) then 365 / to_char(date_dt, 'DDD')
            else 0
       end num_day
from t4;

RsItemNotFound When try to open a report.

We have a bunch of reports deployed on SSRS 2008 r2. These are accessed through a browser normally.
We also have a VB Application - through which some of the above reports are accessed using WebBrowser.Navigate(string)
The report I'm trying to access is a report that contains a whole bunch of sub reports. the main report simply takes and passes the parameters to sub reports.
I have a report I'm accessing currently through this vb application. It's named 1190_Marketing_Detail.rdl
and it takes branch location as parameter.
Below is the string I'm passing and it works. The same string/url I place in the browser address bar, I get the report.
If I remove the parameter LocationID=40 I get an appropriate error message similar to the first bullet point below.
"http://reports.organization.net/ReportServer/Pages/ReportViewer.aspx?/APA/1190_Marketing_detail&LocationID=40&rs:Command=render&rc:Parameters=false&rc:Toolbar=false"
Now I'm trying to access another report(the one that has sub reports as I mentioned above) It's named simply 1190.rdl
and it takes a bunch of parameters. However, right now I'm not passing any parameters. Below is the string I'm passing
"http://reports.organization.net/ReportServer/Pages/ReportViewer.aspx?/APA/1190&rs:Command=render&rc:Parameters=false&rc:Toolbar=false"
I'm expecting error message like below
This report requires a default or user-defined value for the report parameter 'LocationID'. To run or subscribe to this report, you must provide a parameter value.
But I get this instead
The item '/APA/1190' cannot be found. (rsItemNotFound)
1190.rdl is there. I'm not sure why reporting services doesn't see it. Thanks in advance for your help.

When you navigate to the report in the APA folder using report manager, as it's listed there, does it have the ".rdl" extension in the name? If so you'll have to reference it in your URL. Otherwise, you might try renaming the report temporarily to
see if something odd isn't going on in the back end.
You might also verify the permissions on the report and make sure no one broke inheritance or something and removed permissions. It's also possible the account accessing the report doesn't have access to one of the sub reports.

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and service packs.

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and
service packs. Nothing we've done so far has fixed it and I see that I'm not the only person with this problem. However I don't see any answers either.

Hi Kim Sharp,
According to your description that when you view the report it is extremely slow in SSRS 2008 R2 but it is very fast when execute the query in dataset designer, right?
I have tested on my local environment and can‘t reproduce the issue. Obviously, it is the performance issue, rendering performance can be affected by a combination of factors that include hardware, number of concurrent users accessing reports, the amount
of data in a report, design of the report, and output format. If you have parameters in your report which contains many values in the list, the bad performance as you mentioned is an known issue on 2008 R2 and already have the hotfix:
http://support.microsoft.com/kb/2276203
Any issue after applying the update, I recommend you that submit a feedback at https://connect.microsoft.com/SQLServer/
If you don’t have, you can do some action to improve the performance when designing the report. Because how you create and update reports affects how fast the report renders.
Actually, the Report Server ExecutionLog2 view contains reports performance data. You could make use of below query to see where the report processing time is being spent:
After you determine whether the delay time is in data retrieval, report processing, or report rendering:
use ReportServer
SELECT TOP 10 ReportPath,parameters,
TimeDataRetrieval + TimeProcessing + TimeRendering as [total time],
TimeDataRetrieval, TimeProcessing, TimeRendering,
ByteCount, [RowCount],Source, AdditionalInfo
FROM ExecutionLog2
ORDER BY Timestart DESC
Use below methods to help troubleshoot issues according to the above query result :
Troubleshooting Reports: Report Performance
Besides this, you could also follow these articles for more information about this issue:
Report Server Catalog Best Practices
Performance, Snapshots, Caching (Reporting Services)
Similar thread for your reference:
SSRS slow
Any problem, please feel free to ask
Regards
Vicky Liu

To retain the title bar as in the page when we scroll down the report.

Hi,
I want to retain the Report name in the page when i scroll down to access the report columns. i don't want the report name to disappear when we scroll down the report.
Is that possible??
if yes...how??
Thanks.

Hi,
Try to configure Freeze Panes in OBIEE11g it will resovle your issue (obiee11g version obiee11.1.1.6.0 and above)
http://oraclebisolutions.blogspot.com/2012/12/freeze-column-headers-in-obiee-11g111160.html
http://ebs2obiee.wordpress.com/2012/05/08/freeze-panes-in-obiee11g-working-solution/
Thanks
Deva

Process/stpes to modify the report painter reports...

Hi,
I want to modify the report painter report. Could anybody tell me how can we do this. Where can we do this and it would be helpful if any body advise with the steps.
The requirement is to add one line in the current report painter report and remove one line from it.
Regards....

Hi,
Modifying a report painter report is very similar to creating the report itself. Below mentioned are the steps in general, please use them as per your requirement.
From the relevant application, choose Tools->Report Painter->Report->Create.
The Report Painter: Create Report screen appears.
You can also create Report Painter reports from any Report Writer screen. To do so, choose Report Writer->Report Painter-> Create report.
Enter the name of the library the report is to use, and a name and description for the report. The report name can be a maximum of eight characters long. If you want to create your report using an existing Report Painter report as a basis, enter the name of the report that you want to copy under Copy from. Both reports must use the same library.
Choose Create.The next screen displays an empty report containing four rows and four columns (this is the basic structure for a report). You define your report on this screen.
Enter or change the description for the report by double-clicking the report description field.
A dialog box appears in which you can enter a short, medium, and long text for the report description.
Define the rows of your report.Rows contain a combination of characteristic values or formulas. Note the lead column at the first position of the rows. The Report Painter uses the lead column to access the rows. You can replace the description Lead column with a different term.
Define the columns of your report. Columns contain a combination of a basic key figure and optional restricting characteristic values. You can also use predefined key figures to present key figures and characteristics that make business sense. For example, a number of predefined key figures are delivered for the libraries in Overhead Cost Controlling that can be copied directly into the reports, where they can be modified as required.
Define general data selection criteria. The general data selection criteria restrict data selection for the report.
Choose Save and then Execute to create the report. Assign the report to a report group.
You have to display the report before you execute it, so that you can later change the report layout directly from the report list. Once you have defined a report, you can display and print out a table of contents with Extras->Overview.
The overview contains the characteristics and characteristic values used in the individual sections, column blocks, and general data selection criteria. It also provides general information such as the user who last changed the report, the report name, and the standard layout assigned to the report, as well as details on the report formats.
If you double-click an individual characteristic, you can see where this characteristic is used in the report definition.
Hope this helps you. Let me know if you need an specific information.
Rgds
Manish

HELP!! just finished a 20pages report and when trying to create the table of contest I lost EVERYTHING... there is nothing left of my work. WHY????

HELP!! just finished a 20pages report and when trying to create the table of contest I lost EVERYTHING... there is nothing left of my work. WHY????

Hi Peter,
Yes I'am in 5.2, I did mention it right after.
This is wonderful Peter, great advice. I got to have my latest version before I created my table of contents.
In Pages > Menu > File > Revert
and see what you get.
Peter
Thank you so much!!
Have a wonderful day

How can appear just some values when i filter in the report

Hi gurus,
i have a query in a web template, i remember there was a form to do this:
For example in the report there are many analist, A,B,C.
For material 1 the analis A,
For material 2 the analis B,
For material 3 the analis C,
when i filter in the report for material 1. and then the analist, i WANT when i click in filter the suggestion is ANALIST = "A", because is the only analist for this material.
thats my problem when i filter just material A, and click to show the analist , appears ALL the analist in the suggestion of the report and is not correct because if i cliked in analist B the report doesnt bring values , its logic, , i remember some reports when you go filter, the suggestion to show is accord the values that you are showing, can you help me to do this , thanks!

Look at the definition of the infobject and in the query for "Query Execution Filter Value Selection"
This controls the values ie master data or posted items for navigation

Aperture 3.5.1 on OS X 10.9.2 hangs when trying to update the backup

Aperture 3.5.1 on OS X 10.9.2 hangs when trying to update the backup. I get the rotating beach ball cursor for hours but not get the confirmation dialog known from 3.4.2 aksing whether I really want to back up.
On old Mac Mini with OS X 10.6.8 and Aperture 3.4.2 there was no such issue.

Creating a new vault and populating it always works but then turning around and updating that vault hangs? The drive is formatted OS X Extended, correct?
That is strange. Before abandoning vaults, they should and do work in 3.5.1, I'd try this
Run a library repair on the library. I always do this now as it seems to cut down and hangs when updating a vault.
Before starting the vault update open the Aperture activity window Aperture->Window->Show Activity.
Now do the update. I can't give you anything specific to look for, just try to get an idea of where the hang is happening (if it happens after the repair).
As for rsync, it should work OK but keep in mind as a lot of the data now in 3.5 is in database files any change to Aperture will result in reync seeing a lot of files has having been changed so I'm not sure now much of a savings that will be over just copying the library. To be honest I've never tried rsync on an Aperture library so this may not be an issue but something to keep in mind. BTW do you have much rsync experience? It can be a bit of a bear to setup if you're not familiar with it.
Another option is to look at one of the cloning programs Carbon Copy Cloner or SuperDuper. They have the ability to make clones and then update only the changes since the last clone operation. In reality, I believe one or both actually use rsyn as the backend but give you a much nicer way to set it up and schedule it.

LabView hangs when trying to load the same VI with a different user logged onto Win2k

When 'User A' is logged onto Win2k, a particular VI loads and runs fine. When 'User B' logs onto the same Win2k box, LabView hangs when trying to load the VI.
I'm also not seeing the setup channels in the Data Neighborhood in MAX when logged on as 'User B'. I tried loading the configuration when logged on as 'User B' that I think is being used for 'User A', but nothing happens.
Where are the configuration files (of whatever type) that tell LabView which user is logged on?
Thank you!

There are no configuration files that tells LabVIEW what users are logged on. It is Win2K permissions settings that allow different users access to different folders and applications. Try changing the permissions for the LabVIEW folder and see if that doesn't fix your problem.

SDM hang when try to deploy aii_adapter_jms_app from SP9

Hello Everyone,
I trying to apply SP9, when SDM try to apply SAPXIAF09_0-20000273.SCA and more specifically aii_adapter_jms_app have a long time (more than 2 hours) and I can't see any errors in any file (.out, .err, .log). I proceed closing SDM and restart the whole process but I can´t deploy the aii_adapter_jms_app.
Any idea???
Kinds regards,
Carlos

Did you get any answer??
Mine is also hanging when deploying SAPXIAF10_P_1.SCA. the following is the error log.
        ... 13 more
#1.5#00306EF3A78F005600000009000035450003F28790E59207#1111088995604#/Applications/AdminConsole/ABAPConnector#sap.com/tcwebadministratoraba
pco#com.sap.sup.admin.connector.AbapConnectorLauncher#J2EE_GUEST#0####bc434030971d11d98c4700306ef3a78f#SAPEngine_Application_Thread[impl:3]_
19##0#0#Error#1#com.sap.sup.admin.connector.AbapConnectorLauncher#Plain###Cannot start ABAP Connector Listener. Please try to configure the
connection in ABAP Systems Management (Setup Local Connectivity).
java.rmi.RemoteException: com.sap.engine.services.ejb.exceptions.BaseRemoteException: Exception in method startListener.
        at com.sap.sup.admin.connector.rfc.AbapConnectorObjectImpl0.startListener(AbapConnectorObjectImpl0.java:206)
        at com.sap.sup.admin.connector.rfc.AbapConnector_Stub.startListener(AbapConnector_Stub.java:145)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:324)
        at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187)
        at $Proxy20.startListener(Unknown Source)
        at com.sap.sup.admin.connector.AbapConnectorLauncher.contextInitialized(AbapConnectorLauncher.java:42)
        at com.sap.engine.services.servlets_jsp.server.runtime.context.WebEvents.contextInitialized(WebEvents.java:45)
        at com.sap.engine.services.servlets_jsp.server.container.ApplicationThreadInitializer.run(ApplicationThreadInitializer.java:112)
        at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
        at java.security.AccessController.doPrivileged(Native Method)
        at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
        at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
Caused by: java.lang.NullPointerException
        at com.sap.sup.admin.connector.rfc.RfcRuntimeProxy.isListenerRuning(RfcRuntimeProxy.java:169)
        at com.sap.sup.admin.connector.rfc.RfcRuntimeProxy.startListener(RfcRuntimeProxy.java:102)
        at com.sap.sup.admin.connector.rfc.AbapConnectorBean.startListener(AbapConnectorBean.java:34)
        at com.sap.sup.admin.connector.rfc.AbapConnectorObjectImpl0.startListener(AbapConnectorObjectImpl0.java:188)

Wheni try to use the VHScrCap as video the Adobe flash media live encoder 3.2 just closes?

Wheni try to use the VHScrCap as video the Adobe flash media live encoder 3.2 just closes?
how do i fix this?

Moving the discussion to Flash Media Forum.
Regards,
Anit Kumar

Lenovo Vibe X2 keeps hanging when trying to pullup the contacts or when opening the SMS function !

Have been using the Vibe X2 since 2 months. Phone keeps hanging when trying to pullup the contacts or when opening the SMS function. Terribly dissatisfied with the functioning.
*Moderator note:Message edited for a better understanding of the problem/ compliance with the Lenovo Community Participation Rules

Solved, I found the option there:
Contacts - local menu - More features and settings - More display options - Matching digits of number - 7 digits
Works great now,
Regards,

HT201406 I pod-touch touchscreen does not respond, when try to slide the slidder to turn unlock the device it won't respond

Hello,
please help. when try to slide the slidder to turn onlock it won;t respond.

Try:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod
If still problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store.

Error occured when try to open the BI report from words (template builder)

Hi,
After i LogOn into BI Publisher thru words, successful. But when choose a report to open, error returned as "Error occured. Please check the settings and try again."
My team had do various of testing, try to reinstall the BI publisher desktop, but not able solve the problems. From the forum, someone comment is due to data loaded too large, so we try to put a query which only select single record from a small database, but still same error.
then we suspect is due to the proxy setting, because once i reset to bypass the proxy, i able to open the report thru words without any error.
i found this comment from online doc :
Have set up the proxy parameters (to avoid any firewall problems with the Web Services and RSS data set reports) in the xmlpserverstart.bat file or the oc4j.cmd file as per your installation.
Modify the following line, which defines JAVA_HOME. (Observe the proxy parameters in bold.):
• "%JAVA_HOME%\bin\java" %JVMARGS% -jar -Dhttp.proxyHost= <myproxy.mycompany.com> -Dhttp.proxyPort=<Port> "%OC4J_JAR%" %CMDARGS%
Restart xmlpserver or oc4j as the case may be.
but i can't found this xmlpserverstart.bat or oc4j.cmd from server.
Please comment.
Thanks
Regards
Eelyn

hi,
as per you query posted here, please chk ur sql statement what u had written...there may be some problem with that query that is y ur getting the below error.
"error occured. please check the settings and try again BI publisher"
regards
Kanoj

Report hanging (when try to modify the report)

Similar Messages

Maybe you are looking for