Report header/footer not getting displayed ondashboard
We added deault header/footer to OBI reports as per the steps given in OBI Presentation services
administrator guide (section 3: Administering Oracle BI Answers):
By adding xml code as below under 'OracleBIData\web\msgdb\customMessages' folder
<WebMessage name="kuiCriteriaDefaultViewElements" translate="no"><HTML>
<view signature="compoundView" >
<pageProps pageSize="a4">
<pageFooter showOnDashboard="true" show="true">
<zone type="top"><caption>Footer Text</caption>
<displayFormat fontColor="#FF0000"/></zone>
</pageFooter>
</pageProps>
</view>
</HTML>
</WebMessage>
The 'Footer text' is coming in all new requests created, but when we add that request to a
dashboard as embedded section, the footer is not displayed. Can anybody please provide some
information that how we can get any customized text/link added in report footer to get displayed
on the dashboard page.
Thanks!
Hi..
yes, whatever the headers/footers you have mentioned in report will not be shown in dashboard..
But if you mention the report link - download (don't specify headers/footers for dashboard at this time), when you download that report you can see the headers/footers in that report..
But when you use download option for whole dashboard, you can't see those h/f s unless you mention the h/f s for the dashboard...
This is expected, because when user download the dashboard he shouldn't see the 2 h/f s.
So, you need to mention the print pdf s in edit dashboard.
Hope it's clear..
Thanks & Regards
kishore Guggilla
Similar Messages
-
Footer Not Getting Displayed IN OO ALV
HI Experts,
I am using OO ALV and wish to display a footer for it.
but the footer is not getting displayed.Footer for each page means you should use the EVENT END_OF_PAGE this will trigger , but not in display, but when you print the report it will work.
Footer at the end_of report then you have to use END_OF_LIST event.
BCALV_TEST_LIST_EVENTS
check the above program to test the events. -
Header information not getting displayed in the lines
Hello Everyone
I have a very basic question - its very simple but not working for me with so many attempts
My XML structure looks like this . In the RTF , I have header information and then a table for line information looping through G_LINES.
IN this lines table I need the SHIP_CUSTOMER_ID of the header to be displayed. I have tried all options like <?../SHIP_CUSTOMER_ID?> or <?../G_ORDERS/SHIP_CUSTOMER_ID?> , however nothing seems to be working and I am not getting the field to be displayed. Can someone please help?
XML structure is as follows:
<XXSTOL_29251_PICK_TKT>
<LIST_G_ORDERS>
<G_ORDERS>
<CUSTOMER_NUMBER>1411</CUSTOMER_NUMBER>
<SHIPPING_INSTRUCTIONS1></SHIPPING_INSTRUCTIONS1>
<SHIP_CUSTOMER_ID>256</SHIP_CUSTOMER_ID>
<G_LINES>
</G_LINES>
<G_LINES>
</G_LINES>
</G_ORDERS
</LIST_G_ORDERS>
</XXSTOL_29251_PICK_TKT>Are you grouping within G_LINES? If so, use ../../SHIP_CUSTOMER_ID
or send me the xml and RTF template to [email protected] so that I can get a better look at the data structure and try to help.
Thanks,
Bipuser -
Heading is not getting displayed in the workbook
Hi,
My requirement is i need the heading of the query to be dispalyed in the workbook,
when i execute the query i do get the title of the query but when i insert the query in the workbook,i do not see the title.
could you please help me.
thanks,
apparaoHi,
Open a query in Excel analyzer and click Save as workbook button(to save as a workbook). The query name should come as a title.
Regards,
Senthil Kumar.P -
Data is not getting displayed in the report from an Infoset.
Hi All,
I am having a report based on an infoset. This report is displaying the data in the Dev. envmt. When it is transported to the QA, it is not displaying the data in the BEx as well as RSRT, in the QA envmt. The patch levels of both the Dev. and QA are the same. The Queries are same in the Dev and QA also.
While trying to display the data from the infoset (rt.click- display data), i am able to view the data, in the QA.
Could anyone please suggest why the data is not getting displayed in the query designer.
Thanks & Regards,
A.V.N.RaoHi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao. -
'@' not getting displayed in the ALV report
Hello,
I am facing a strange issue in the ALV report display. A string starting with '@' is not getting displayed and says "default icon " on the report. and this is varying from system to system for the same user.
can anyone please help me in resolving the issue.
Thanks in advance.
Thanks and Regards,
Santhosh Guptha N.@ is a default value as per ALV internal process. This is used in icons .
I think this is causing the confusion.
Check in the fieldcat if there is any adjsutment to be made to handle this.
Br,
Vijay -
Header not getting displayed in the next page in the second table
Dear Experts ,
I have a query regarding Header not getting displayed in the next page in the second table of the main window. .Let me elobrate the issue.
I have a smartform in which there are 2 tables TABLE 1 and TABLE 2 in the smartform MAIN window. TABLE 1 is for pending PO and TABLE 2 is for future delivery date P O separated by text in between.
Now the header for both the tables and the data are getting displayed properly if the total output is in only one page. But If there are more entries in the TABLE 1 the Header for the TABLE 2 is not getting displayed. Header for TABLE 1 yet gets displayed properly in the next page in case of more entries.
Only issue is that Header for TABLE 2 is not getting displayed in second page but it gets displayed if the entries are less in TABLE 1 and the total output is in one page .
Please provide a elobrate solution on this problem as the requirement is urgent.
Thanks,
Regards,
Sachin HadaHi Sachin,
you need to cteate two pages FIRST and NEXT.
in first page --> FIRST
next --> NEXT
in next page
page---> NEXT
next ---> NEXT.
you copy the first page main window is the same in next page
aslo
I think help ful for you
thanks & Regards
BHUPAL. -
Hier Node with character (e.g. 11100A) is not getting displayed in report
Hi All,
I have loaded the Finanacial Statement Version Hier in BI. It is perfectly loaded in the InfoObject 0GLACCEXT.
Some Hier Nodes contain charcters in the Node name like 1100A and 1100B and rest are all number like 1100, 1200, 11000 etc.
While I run the Report the Hier Nodes with nos (like 1100, 11000) are perfectly getting displyed in the report. But the Hier Nodes having the characters (like 1100A and 1100B) are not getting displayed into the Report and all the GLs under it are going into Unassigned node in the Reports.
Plz help me.
Regards,
SandeepSandeep,
Your hierarchy is made up of characteristics with the values 1100, 11100A etc.
In your hierarchy is RSH1, does each node have the specific characteristic value Node 1
-1100
-11100A etc
Or is it a range i.e.
Node 1
1000 : 11100A
Regards
Gill -
Budget is not getting displayed in Report S_ALR_87013558
Hi Friends,
For project the budget is not getting displayed in Report S_ALR_87013558 though the budget is planned by TCode: CJ30 and released also by TCode: CJ32
Is there any setting in customising in information systems to display in the report.
Please treat this as quite urgent.
Regards,
Manohar NHi Sridhar,
Thanks for the input.
But still Budget is not appearing in the report, even after running CJBN & CJEN.
I had a look into CJ30 but the overall Budget is available. Is there any change required in the report.
Regards,
Selva -
Profit center text not getting displayed in report
Hi all
Iam using 0profit_ctr in my query.But in report the text associated with it is not getting displayed.When i see the masterdata the text is displayed properly.
Please let me know how to rectify this.
Thanks
BhanuRight click on the master object, and click "Activate Master Data"
Hope this will resolve the issue.
Ishdeep. -
Header Vendor text is not getting displayed for PO in BBP_PD transaction.
Hi Experts,
We are upgrading SRM 3.0 to SRM 7.0 .In the upgraded sys the Header Text 'HTXT' is not getting displayed for the Purchase order created in BBP_PD. For the SCs the Header text field is populated correctly.
Inputs on this will be very helpful.
Regards,
Ravi.KRavi,
Check in IMG if the text schema is used in configuring PO transaction type. Define Transaction Types is the setting.
SG -
MD06 Issue - Planned orders not getting displayed
Hello,
Planned order with the exception "Newly created order proposal" does not get displayed in MD06 with the option "Only Unprocessed MRP Lists" in the processing indicator.
I am running MD06 report with the following parameters:
Plant
MRP Controller
Exeception Group - All exception selected except 8-Terminations
Processing indicator - Only unprocessed MRP LIsts, Only with new exceptions
My material which has a newly created planned order thorugh MRP run with exception "1 - Newly created order proposal" does not get displayed.
Only when I specify Only processed MRP lists or All MRP LIst in the processing indicator, this material gets displayed. The planned order is for a Stock Transfer order to this plant (receiving plant). How is the MRP LIst processed?
Please help me out with this issue.
Sincerely,
KetanHi Ketan,
When you execute the MD06 report, you would find a column with the heading CI, if am right it would be just after the MRP cntlr, here you would find a Pencil & a tick mark. If you find them both, it means the row is unprocessed, but if you find only a tick mark it means that the row is processed.
So now check for the planned order, it would be just a tick mark & hence would be showing only for the processed MRP list or all MRP lists.
To process a row or unprocess, just click on the icon & it changes.
Check & revert if it answers your query.
Regards,
Vivek -
Total is not getting displayed in the ALV output.
Hi,
Total is not getting displayed in the ALV output.
I m using :REUSE_ALV_BLOCK_LIST_APPEND & REUSE_ALV_BLOCK_LIST_DISPLAY
Are there any issues with it as the same settings are working fine with REUSE_ALV_LIST_DISPLAY
source code:
DATA: layout TYPE slis_layout_alv,
IT_eventS TYPE slis_t_event,
fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
rec_fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
TYPES: BEGIN OF ty_tab,
belnr TYPE dberchz-belnr,
belzart TYPE dberchz-belzart,
net TYPE dberchz-nettobtr,
END OF ty_tab.
DATA: lt_tab TYPE STANDARD TABLE OF ty_tab.
SELECT belnr belzart nettobtr
FROM dberchz
INTO TABLE lt_tab[]
WHERE belnr eq '000000000001'.
if sy-subrc ne 0.
ENDIF.
* defining layout
layout-colwidth_optimize = 'X'.
layout-def_status = 'X'.
*defning event
*event
*defining field catalog
fcat-col_pos = 1.
fcat-fieldname = 'BELNR'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 2.
fcat-fieldname = 'BELZART'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 3.
fcat-fieldname = 'NET'.
fcat-tabname = 'LT_TAB'.
fcat-do_sum = 'X'.
APPEND fcat.
*calling alv
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
i_callback_program = 'YZ_PLR'
* I_CALLBACK_PF_STATUS_SET = ' '
* I_CALLBACK_USER_COMMAND = ' '
* IT_EXCLUDING =
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
is_layout = layout
it_fieldcat = fcat[]
i_tabname = 'LT_TAB'
it_events = IT_EVENTS[]
* IT_SORT =
* I_TEXT = ' '
tables
t_outtab = lt_tab[]
* EXCEPTIONS
* PROGRAM_ERROR = 1
* MAXIMUM_OF_APPENDS_REACHED = 2
* OTHERS = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
Thanks,
GauravHi
No I don't think, this is my code (based on your code) and it works fine:
TYPE-POOLS SLIS.
DATA: BEGIN OF LT_TAB OCCURS 0,
BELNR LIKE BSEG-BELNR,
GJAHR LIKE BSEG-GJAHR,
WRBTR LIKE BSEG-WRBTR,
WAERS LIKE BKPF-WAERS,
END OF LT_TAB.
DATA: LAYOUT TYPE SLIS_LAYOUT_ALV,
IT_EVENTS TYPE SLIS_T_EVENT,
FCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
REC_FCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
START-OF-SELECTION.
FCAT-COL_POS = 1.
FCAT-FIELDNAME = 'BELNR'.
FCAT-TABNAME = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'BELNR'.
FCAT-REF_TABNAME = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS = 2.
FCAT-FIELDNAME = 'GJAHR'.
FCAT-TABNAME = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'GJAHR'.
FCAT-REF_TABNAME = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS = 3.
FCAT-FIELDNAME = 'WRBTR'.
FCAT-TABNAME = 'LT_TAB'.
FCAT-CFIELDNAME = 'WAERS'.
FCAT-REF_FIELDNAME = 'WRBTR'.
FCAT-REF_TABNAME = 'BSEG'.
FCAT-DO_SUM = 'X'.
APPEND FCAT.
FCAT-COL_POS = 4.
FCAT-FIELDNAME = 'WAERS'.
FCAT-TABNAME = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'WAERS'.
FCAT-REF_TABNAME = 'BKPF'.
FCAT-DO_SUM = SPACE.
APPEND FCAT.
SELECT * FROM BSEG INTO CORRESPONDING FIELDS OF TABLE LT_TAB
WHERE BUKRS = 'MAAB'
AND BELNR = '0000000001'.
LT_TAB-WAERS = 'EUR'.
MODIFY LT_TAB FROM LT_TAB TRANSPORTING WAERS WHERE WAERS = SPACE.
*CALLING ALV
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
I_CALLBACK_PROGRAM = 'ZPROVAMAX5'.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FCAT[]
I_TABNAME = 'LT_TAB'
IT_EVENTS = IT_EVENTS[]
TABLES
T_OUTTAB = LT_TAB[].
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
I've also inserted a currency field
Max -
Portal Forms are not getting displayed in the new oracle environment.
Hi All,
The Forms in our Portal applications are not getting displayed after we have done the upgradation of Database in Unix from 8i to 9i. The reports are working fine.The forms that were added as portlets are not getting displayed and other forms that are called thorough links returns error when it is run. The Newly created forms are also not running but returns error. The Portal Version is 3.0.9.8.3. Pls help.
Regards,
TomHi ,
Based on the requirement , check whether the customer contact has been done carried out for the invoice , then possibility it must have gone out of the worklist , chekc whether the Invoice posted in the AR has been transferred to FSCM collection . -
Default Value is not getting displayed in SUN ONE Ldap
Hello,
I have created an attribute in slapd.user_at.conf and it is associated in slapd.user_oc.conf.
The attribute default value is given through SUN ONE Console. But, In our application the default value is not getting displayed.
We need the default value to run our applicatin. Can anyone help me for this issue
Regards,
K. Senthil KumarHi anandkumar,
I belive this issue can be resolved by changing the Query proprties for the perticular field.
Kindly check the Field proerties in query designer and ensure that Text is enabled ather than Key.
__Field property check up:__Go to query designer->click onn the field-> Right hand side in properties click on display tab-> select Text in drop down menu of Display as tab.
FURTHER CHECK UP: check the master data avaiulability for the perticular info object, if masterdata is not available, do the text data for txt data availability in report level.
Hope this helps you!!
Best Regards,
Maruthi
Maybe you are looking for
-
can some one help me making it run automatically and adding slideshowTimer on the codes below next_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToNextFrame); function fl_ClickToGoToNextFrame(event:MouseEvent):void nextFrame(); previous_btn.
-
I am not reachable, but forwarded the port in AE & OSX Firewall
hi, i forwarded the port 49500 for my bittorrent client, using with macgamefiles for example, in my osx firewall and my airport admin tool. 49500 - 10.0.1.2 - 49500 my torrent client is running, when i check it at www.canyouseeme.org i get an error:
-
Hi All, We have requirment to run some calc scripts in sequence as they are dependent. If we merge all the scripts in one script then due to dependency calculations are not done or not giving proper result. Is there any way so that calculation script
-
System.arrayCopy with generics
I am new to generics. Could anybody show me a class/method like System.arrayCopy that would work with any primitive arrays using generics?
-
Web Based Utiliies for WRT300N
I forgot my username and password. Is there a way to reset, or is there any other way I can get into my utilities?